I was trying to flash my EVO to Boost mobile and this is where my trouble began. After I had went through the steps of flashing I had to reboot. Upon reboot I get a constant reboot. When I try to go to recovery it goes to the htc screen and then keeps rebooting. I have tried flashing clockwork...I have tried the PC36IMG.zip...I have tried many stock RUU's and none of them work. Has anyone ever heard of this because of flashing? I have a link to a vid I posted on youtube....
http://www.youtube.com/watch?v=5Yszd4CamDs
alnova1 said:
I was trying to flash my EVO to Boost mobile and this is where my trouble began. After I had went through the steps of flashing I had to reboot. Upon reboot I get a constant reboot. When I try to go to recovery it goes to the htc screen and then keeps rebooting. I have tried flashing clockwork...I have tried the PC36IMG.zip...I have tried many stock RUU's and none of them work. Has anyone ever heard of this because of flashing? I have a link to a vid I posted on youtube....
http://www.youtube.com/watch?v=5Yszd4CamDs
Click to expand...
Click to collapse
In your video you said you tried the latest ruu. In your video you state that it is version 3.30. The latest ruu is 3.70. I would try using that ruin first.
Sent from my PC36100 using XDA Premium App
Rem3Dy said:
In your video you said you tried the latest ruu. In your video you state that it is version 3.30. The latest ruu is 3.70. I would try using that ruin first.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
I might have said 3.30 but it was 3.70. As a matter of fact I have tried older and new ones and none of them help.
You running the .zip RUU or the .exe?
NewZJ said:
You running the .zip RUU or the .exe?
Click to expand...
Click to collapse
I have tried both and none of them have worked. Is one in your opinion better than the other?
Both good, use one when other won't work, have you tried flashing recovery in bootloader?
NewZJ said:
Both good, use one when other won't work, have you tried flashing recovery in bootloader?
Click to expand...
Click to collapse
Yes I have and after I flash and try to go to recovery it just does the same thing...boot loop..over and over.
Does your bootloader say s- on?
NewZJ said:
Does your bootloader say s- on?
Click to expand...
Click to collapse
No...its off...
Checked the ruu zip md5 match?
NewZJ said:
Checked the ruu zip md5 match?
Click to expand...
Click to collapse
Yes I did...I just can't figure it out.
I'm stumped, you need expert, find xhaus
NewZJ said:
I'm stumped, you need expert, find xhaus
Click to expand...
Click to collapse
I have looked some of his threads that seem to be my problem but I can't get them to work for me. I'm at a loss...
The only thing that comes to mind is to flash stock recovery. Then s-on then the ruu zip
NewZJ said:
The only thing that comes to mind is to flash stock recovery. Then s-on then the ruu zip
Click to expand...
Click to collapse
I just tried to flash a stock recovery...supposedly and it still didn't work. I'm thinking I need to get s-on but can't. I have to admit I'm pretty good at rooting and the whole rom thing but have never had a problem like this so I might be over my head. I thought I found a link to a stock recovery but maybe Im looking in the wrong place.
Related
Can some one please tell me witch gps fix is the latest one and witch one in your opinion actually works. I see that a popular fix is the Dj05 radio fix and there is even a hardware fix out for the vibriant that bends the gps antenna contact. So witch one should I try first? witch actually works and witch are known not to work?
I searched and came up with a lot of different threads and I think we should consolidate all those threads and list all the fixes and make a poll asking witch fix worked better for the users. This is a very common problem and I am surprised there are no stickies threads been update regularly with the latest info. The biggest problem is that there are MANY threads about it and some are very old, not sure if there are better fixes now.
So please help me list and consolidate all those threads, I will update this post showing all your input. I also have 3 fascinates that all are a little different when it comes to gps and would love to try the fixes and post my results on all three.
Edit: I would also like to write the proper way to test your gps, I see some threads have this buried in between the gps fix steps and I would like to make it more obvious so if you know how to properly test the gps, let me know. I know there are some apps like gps test and status that show you lots of info, would be great to see a list results with a working gps and a faulty one.
thanks.
Dj05 solved my GPS woes.. insta-lock now..
Sent from my SCH-I500 using Tapatalk
When I was running stock, and rooted dI01 I laterally could not acquire a signal. I tried leaving it on, outside in the open, for over an hour, and nothing.
Going to dj05 I can lock within 10 seconds or less.
I am so impressed with the difference.
Dalamar1320 said:
When I was running stock, and rooted dI01 I laterally could not acquire a signal. I tried leaving it on, outside in the open, for over an hour, and nothing.
Going to dj05 I can lock within 10 seconds or less.
I am so impressed with the difference.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=869990&highlight=dj05
I tried following the guide on this link, successfully installed the radio via odin, tried installing the rom and kernel through clockwork but I do not have an option to choose zip file from sd card. the only option i get is to apply sdcard: update.zip. I changed the name of the rom zip file to update.zip and tried to flash it but it told me it failed to verify whole-file signature. What should I do now?
the guide does not explain much so I need some help.
Did you flash clockworkmod recovery through odin, then flash clockwork from rom manager? If so you should have an update.zip on your sd card that when applied takes you to clockwork then you can choose which zip to flash from there...
Sent from my SCH-I500 using XDA App
jiggaman508 said:
Did you flash clockworkmod recovery through odin, then flash clockwork from rom manager? If so you should have an update.zip on your sd card that when applied takes you to clockwork then you can choose which zip to flash from there...
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I do not think I flashed clockwork with odin, what I did is installed the dj05 Radio with odin by checking pda and finding the file, then pressing start. after that, the phone rebooted and I installed rom manager. Once in rom manager I installed the latest clockworkmod recovery 2.5.1.0. I do not have an update.zip file there on the root of my sdcard. what did I do wrong? How do I fix it? THanks
in about phone I can see that baseband version is s:i500 V.DJ05
The fascinate is different from other phones you need to flash clockwork through odin then in rom manager here is a link on how to flash through odin
http://forum.xda-developers.com/showthread.php?t=788099
Flash that, then delete any update.zips on your sd card, then in rom manager flash clockwork and it will download an update.zip that when applied from stock recovery will take you into clockwork... Once all that is done if you already have the modem installed boot into clockwork and select install zip and find the DJ05 rom you downloaded, flash that and you should be all set...
Sent from my SCH-I500 using XDA App
jiggaman508 said:
The fascinate is different from other phones you need to flash clockwork through odin then in rom manager here is a link on how to flash through odin
http://forum.xda-developers.com/showthread.php?t=788099
Flash that, then delete any update.zips on your sd card, then in rom manager flash clockwork and it will download an update.zip that when applied from stock recovery will take you into clockwork... Once all that is done if you already have the modem installed boot into clockwork and select install zip and find the DJ05 rom you downloaded, flash that and you should be all set...
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Thank you, I was just about to post that same link here and ask you if this was the correct guide to follow. I just booted into the familiar clockwork and now I am flashing all the good stuff. will update later.
well something went bad, I rebooted and I can see the samsung logo but the there is no splash screen after that only sound. the screen is completely black after that. NOW WHAT??
jonagpa said:
Thank you, I was just about to post that same link here and ask you if this was the correct guide to follow. I just booted into the familiar clockwork and now I am flashing all the good stuff. will update later.
Click to expand...
Click to collapse
No problem ill check back to make sure all went well
Sent from my SCH-I500 using XDA App
jiggaman508 said:
No problem ill check back to make sure all went well
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
that is really weird, same thing happen but I tried unlocking the phone event though the screen was completely black and it did unlock. Have you heard of this happening?
What did you flash?
Sent from my SCH-I500 using XDA App
jonagpa said:
that is really weird, same thing happen but I tried unlocking the phone event though the screen was completely black and it did unlock. Have you heard of this happening?
Click to expand...
Click to collapse
No that's different so it's working now though?
Sent from my SCH-I500 using XDA App
jiggaman508 said:
What did you flash?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=869990&highlight=dj05
go near the bottom of this guide, youll see system/rom and also kernel links. thats what I flashed.
jonagpa said:
http://forum.xda-developers.com/showthread.php?t=869990&highlight=dj05
go near the bottom of this guide, youll see system/rom and also kernel links. thats what I flashed.
Click to expand...
Click to collapse
You flashed both system and kernel? And did you wipe data/cache?
Sent from my SCH-I500 using XDA App
jiggaman508 said:
No that's different so it's working now though?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
yeah, seems to be working fine, I am afraid to reboot the phone and have it completely die on me. did I flash the correct kernel and rom?
jiggaman508 said:
You flashed both system and kernel? And did you wipe data/cache?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
yes flashed both in order that they are listed.
I did factory reset, I though cache was included in that reset, wrong?
jonagpa said:
yes flashed both in order that they are listed.
I did factory reset, I though cache was included in that reset, wrong?
Click to expand...
Click to collapse
No you should be ok, and if you flashed the rom/kernel from that thread you are good...
Sent from my SCH-I500 using XDA App
jiggaman508 said:
No you should be ok, and if you flashed the rom/kernel from that thread you are good...
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I rebooted and it does the same, no splash screen. I waited a few seconds to make sure it booted all the way and the screen turn on by it self. seems like somehow I messed up the splash screen. I am going to try and go back to stock then try this again. I tested the gps on all 3 of my phones. white one is still doing the best, OG one (stock) is still doing same as before and the new one with dj05 is using more sats that the OG(6/8), but the OG has more sats in view (5/9). Is that weird?
That djo5 kernel from thread does not support boot animations. It's normal for that kernel.
good day.
I remember with the old MT3G that SAPPIMG.nbh was like our ultimate safety net. As long as we could get into bootloader we could at least get back to OEM Cupcake. I like the idea of being able to bring the phone back to 100% OEM.
I've seen the PD15IMG.zip for MT4G floating around but not a lot of documentation on how to use it.
Can anyone confirm that it works the same way? Does flashing it override whatever is on the phone and bring us back to a perfectly OEM image, complete with S-ON and root access gone without a trace?
Lastly, is it safe to flash from S-OFF or do I need to turn S-ON first?
Thanks!
Yes and yes. Unless you used gfree to get radio s off in which case you need to use the s on guide at the bottom of that post.
Sent from my HTC Glacier using XDA App
grankin01 said:
Yes and yes. Unless you used gfree to get radio s off in which case you need to use the s on guide at the bottom of that post.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Thanks, Granks!
Nope, no radio s-off. I figure I'll just call T-mobile and ask if I want to sim unlock it.
As for the guide to forcing update - there's a second pd15img.zip file (20mb or so) and then an update.zip. Are both really necessary to unroot, stay stock, and get current to 2.2.1?
Or can I just use the first pd15img.zip (311mb) and then the update.zip and skip the middle part, which from what I've read seems to temporarily root/s-off the phone?
The original pd15img.zip will be 2.2. You will need the second one to update it to 2.2.1.
Sent from my HTC Glacier using XDA App
grankin01 said:
The original pd15img.zip will be 2.2. You will need the second one to update it to 2.2.1.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
So that's a total of 2 update.zips, not three. That's what I thought. I just want to be sure since I don't know exactly what these updates do, only their intended usage...
Thanks!
Np
Sent from my HTC Glacier using XDA App
Wow. Perfect timing. So if one followed the original s-off/root thread without gfree, all we need to do is flash that to be stock again? Can someone link the image?
I have a replacement phone coming, so this will simplify my exchange.
Sent from my HTC Glacier using XDA App
mattjmartin said:
Wow. Perfect timing. So if one followed the original s-off/root thread without gfree, all we need to do is flash that to be stock again? Can someone link the image?
I have a replacement phone coming, so this will simplify my exchange.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Here you go.
http://www.filedropper.com/pd15imgglaciertmous1175312radio1228b60140e26030226mrelease155771signed
mirror.
http://www.filefactory.com/file/caa....140e_26.03.02.26_M_release_155771_signed.zip
Phateless said:
This will get you to 2.2, not sure if the ota will still come.
http://db.tt/6GFTLxj
I believe this is the update to 2.2.1. Let me know how it works.
http://db.tt/oDkWb2k
Click to expand...
Click to collapse
Thank you sir! Nice touch with the dropbox links too, made it even easier for me! I'll be back on in a few hours to let you know how it all went!
mattjmartin said:
Thank you sir! Nice touch with the dropbox links too, made it even easier for me! I'll be back on in a few hours to let you know how it all went!
Click to expand...
Click to collapse
Not a problem! It can be so hard to track all this **** down, that's why I've started collecting links in my sig in case anyone else happens to need them. Time to update my sig and add in the MT4G links too.
Do I need to flash the stock recovery first?
EDIT: I'm getting an "main version is older" error when trying to flash over cyanogenmod 6.1. I'm going to nandroid back to my stock image with root and see if I can flash it over that. Hopefully I can. Any ideas anyone?
mattjmartin said:
Do I need to flash the stock recovery first?
Click to expand...
Click to collapse
To flash the file in the OP? No, you flash this through hboot and it will wipe your phone, replace your recovery, unroot you and restore you to S-ON.
Basically it returns your phone to an out of the box state.
Phateless said:
To flash the file in the OP? No, you flash this through hboot and it will wipe your phone, replace your recovery, unroot you and restore you to S-ON.
Basically it returns your phone to an out of the box state.
Click to expand...
Click to collapse
I guess I should be a bit quicker on my edits! Anyway, when flashing through hboot over CM6.1 I get "main version is older" errors. I was going to nandroid back to stock + root but it is now bootlooping when nandroiding back to stock. This is frustrating. I still get the same "main version is older" error over my stock nandroid as well.
mattjmartin said:
I guess I should be a bit quicker on my edits! Anyway, when flashing through hboot over CM6.1 I get "main version is older" errors. I was going to nandroid back to stock + root but it is now bootlooping when nandroiding back to stock. This is frustrating. I still get the same "main version is older" error over my stock nandroid as well.
Click to expand...
Click to collapse
Are you doing a full wipe between your nandroids? If you still have S-OFF you can fastboot reflash cwm recovery and then restore or flash whatever the heck you want.
Phateless said:
Are you doing a full wipe between your nandroids? If you still have S-OFF you can fastboot reflash cwm recovery and then restore or flash whatever the heck you want.
Click to expand...
Click to collapse
I did not know it was wise to wipe between nandroids...
Just for reference, I'm trying to restore to stock so I can ship it back to t-mobile. So far all I have accomplished is doing a nandroid restore to stock + s -off + root, yet somehow it is bootlooping... I may use fastboot to flash the stock recovery and try to restore it then.
Sent from my HTC Glacier using XDA App
mattjmartin said:
I did not know it was wise to wipe between nandroids...
Click to expand...
Click to collapse
That's your problem right there. In recovery before you nandroid restore do WIPE DATA/FACTORY RESET. Then restore your nandroid and it should boot right up.
Or are you doing this through Rom Manager? Boot into recovery and do this manually so you can wipe/reset before you restore. I just restored from cm7 this morning. Heck, I nandroid back and forth between Sense and CM6 about twice a week. Literally...
mattjmartin said:
I did not know it was wise to wipe between nandroids...
Just for reference, I'm trying to restore to stock so I can ship it back to t-mobile. So far all I have accomplished is doing a nandroid restore to stock + s -off + root, yet somehow it is bootlooping... I may use fastboot to flash the stock recovery and try to restore it then.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
easiest way is to follow my guide for unrooting
jjjackson56 said:
easiest way is to follow my guide for unrooting
Click to expand...
Click to collapse
I didn't follow the ultimate guide so I just went straight to flashing the image file in hboot but it gives me a "main version is older" error and kicks me out... I am on CM 6.1, what could be the reason?
I have 3 ideas for what my problems could be: 1) CM Kernal (does nandroid restore the kernal?) 2) Not wiping in clockwork before nandroid restore (hopefully I still have clockwork) 3) Bad PD15IMG.zip download (like an idiot I downloaded it from the device itself...)
I will work on it again tomorrow and be back to this thread.
Thanks again for the help guys!
mattjmartin said:
I didn't follow the ultimate guide so I just went straight to flashing the image file in hboot but it gives me a "main version is older" error and kicks me out... I am on CM 6.1, what could be the reason?
I have 3 ideas for what my problems could be: 1) CM Kernal (does nandroid restore the kernal?) 2) Not wiping in clockwork before nandroid restore (hopefully I still have clockwork) 3) Bad PD15IMG.zip download (like an idiot I downloaded it from the device itself...)
I will work on it again tomorrow and be back to this thread.
Thanks again for the help guys!
Click to expand...
Click to collapse
Oh wow, definitely download from a computer. It's a 311mb file. Did you check the md5sum?
Mine seems fast over wi-fi.....
Phateless said:
Oh wow, definitely download from a computer. It's a 311mb file. Did you check the md5sum?
Click to expand...
Click to collapse
Sent from my stickie key HTC Glacier using XDA App
I am new to power using with phones. I had went to install syndicate and my phone had crashed, i finally got it up and running with oden once, Tried it again, this time i can't seem to get oden to work. At one point my phone wasn't even turning on or doing anything until i had taken it to a sprint store hoping my insurance would cover it.
I can get into clockwork.
I can get into download mode.
Oden is not working.
and Installing from zip is not working.
I could really use some help with this.
Thank you.
bloodywaterfox said:
I am new to power using with phones. I had went to install syndicate and my phone had crashed, i finally got it up and running with oden once, Tried it again, this time i can't seem to get oden to work. At one point my phone wasn't even turning on or doing anything until i had taken it to a sprint store hoping my insurance would cover it.
I can get into clockwork.
I can get into download mode.
Oden is not working.
and Installing from zip is not working.
I could really use some help with this.
Thank you.
Click to expand...
Click to collapse
Try another USB cable and also make sure it is plugged into the same USB port as before.
I've tried a couple already, any other idea's?
bloodywaterfox said:
I've tried a couple already, any other idea's?
Click to expand...
Click to collapse
Did u convert to ext4 before u tried to flash srf? Also srf didn't come with a kernel u need to flash a kernel right after the rom
Sent from my SPH-D700 using XDA Premium App
If there would be something wrong with the boot, is there a way to fix this? After using odin or installing from zip it goes right back into clockwork every time.
bloodywaterfox said:
If there would be something wrong with the boot, is there a way to fix this? After using odin or installing from zip it goes right back into clockwork every time.
Click to expand...
Click to collapse
U still didn't answer my question. If Odin doesn't recognize ur phone try installing the drivers again
Sent from my SPH-D700 using XDA Premium App
Esteway.619 said:
Did u convert to ext4 before u tried to flash srf? Also srf didn't come with a kernel u need to flash a kernel right after the rom
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
I have no idea, probably not. would you mind showing me how i can find these?
and I posted while you were posting.
I have tried several sets of drivers, and as far as i know odin reads/sees my phone fine.
bloodywaterfox said:
I have no idea, probably not. would you mind showing me how i can find these?
and I posted while you were posting.
I have tried several sets of drivers, and as far as i know odin reads/sees my phone fine.
Click to expand...
Click to collapse
Download and flash rfs2ext4 here's the link. http://forum.xda-developers.com/showthread.php?t=1109362
Edit: afther u flash this make sure u reflash the rom and then flash a kernel. Like genocide or twilight
Sent from my SPH-D700 using XDA Premium App
so i just run the zip from clockwork, then what? i'm a bit android illiterate, i really could use and appreciate the help.
This is what i did, not sure if it is right or not, however it didn't work.
wiped.
ran rfs2ext4.zip
ran syndicatefro110-fullyloaded-signed.zip
ran genocide2.0_voodoosnd10.zip
and it still keeps boot looping.
I have also been getting a E:cant open /cache/recovery/log
bloodywaterfox said:
This is what i did, not sure if it is right or not, however it didn't work.
wiped.
ran rfs2ext4.zip
ran syndicatefro110-fullyloaded-signed.zip
ran genocide2.0_voodoosnd10.zip
and it still keeps boot looping.
I have also been getting a E:cant open /cache/recovery/log
Click to expand...
Click to collapse
What recovery are u using?? I would say try to really install the drivers on your computer and use Odin to go back to stock and start fresh.
Sent from my SPH-D700 using XDA Premium App
Thanks everyone for the help anyways, I found a .tar file that was a full install for odin and now i have it up and running.
I also figured out what i was originally doing, rooting and installing syndicate.
Thanks guys.
He didn't install a kernel.
Hey trying to help my brother with his phone and I've never encountered this problem before.
He downloaded Rom Manager from the Market and proceeded to flash CWM.
After flashing I told him to use the "Reboot into recovery" in order to create a NANDroid back up.
His phone reboots and then gets stuck on an image of what he says is a "phone with a red exclamation mark."
I've checked with him and he says "fast boot" is off. His phone IS rooted.
Obviously this is the first time he's ever needed to use CWM.
I've never personally encountered this problem and I've rooted 10 (6 replacements for me and one for my wife, 2 for my brothers and one for their girlfriend lol.) MT4Gs and have installed custom ROMs.
If you guys have any suggestions or ideas PLEASE let me know.
Thanks a lot.
The forum search yielded some threads about turning off "fast boot" or maybe a bad flash.
I've had him reflash CWM. Still no luck.
Again, thanks for any help.
I'm assuming he's rooted right? With S-OFF? In any case, it seems that it's not sticking. One common mistake is that he might have accidentally denied the SU permissions while opening RM. So un install and re install RM and make sure you accept SU permissions.
mackster248 said:
I'm assuming he's rooted right? With S-OFF? In any case, it seems that it's not sticking. One common mistake is that he might have accidentally denied the SU permissions while opening RM. So un install and re install RM and make sure you accept SU permissions.
Click to expand...
Click to collapse
Yeah Macky...he is rooted. I'll have him try it again. He did mention something about su.binary something or another.
I told him to update Superuser. We'll see if that helps.
nguyendqh said:
Yeah Macky...he is rooted. I'll have him try it again. He did mention something about su.binary something or another.
I told him to update Superuser. We'll see if that helps.
Click to expand...
Click to collapse
Yeah try updating the latest SU and make sure he didn't deny RM. That's might be what happened. If not, try updating his CWM manually via terminal emulator, ADB or Fastboot.
Here's how to do that.
For clockwork recovery to actually work, you have to download rom manager and from within rom manager install clockwork first.
You just do not download rom manager and right away boot into recovery.
Sent from my HTC Glacier using xda premium
Maybe I shouldn't be rude. Sorry.
nguyendqh said:
"He downloaded Rom Manager from the Market and proceeded to flash CWM."
Thanks. I can tell you read the original post. Appreciate the help man.
I didn't know that at all.
Click to expand...
Click to collapse
Whoa! Why don't we chill out a bit yea. I just mentioned it because some people think that just downloading rom manager and trying to boot into recovery that's how you flash the thing and get it working.
And I did read the whole thing and did read where you said rom manager got downloaded and prceeded to flash cwr. But you also stated you told your bro to press reboot into recovery. Which made me think he probably mistakenly, try booting into recovery before actually flashing it. I was just trying to cover steps to help you guys out.
Sent from my HTC Glacier using xda premium
coupetastic-droid said:
Whoa! Why don't we chill out a bit yea. I just mentioned it because some people think that just downloading rom manager and trying to boot into recovery that's how you flash the thing and get it working.
And I did read the whole thing and did read where you said rom manager got downloaded and prceeded to flash cwr. But you also stated you told your bro to press reboot into recovery. Which made me think he probably mistakenly, try booting into recovery before actually flashing it. I was just trying to cover steps to help you guys out.
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
I apologized in the previous post before I even saw this. Sorry bad day at work.
Not your fault.
And thanks. Honestly. =P
nguyendqh said:
I apologized in the previous post before I even saw this. Sorry bad day at work.
Not your fault.
And thanks. Honestly. =P
Click to expand...
Click to collapse
All good. Hope you find a fix.
Sent from my HTC Glacier using xda premium
coupetastic-droid said:
All good. Hope you find a fix.
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
Gonna give this a try when he gets home from work.
http://forum.xda-developers.com/showthread.php?t=1200147
im unable to boot mytouch after running ota update. stuck at mytouch logo. please help
Is this the Official MyTouch update your talking about?
Had the same problem with the official MyTouch was the update successful? Just do a battery pull and try turning it back on.
Sent from my HTC Glacier ...Awesome... (MT4G) using xda premium
yes it is official update. already tried battery pull and tried to ruu back to stock
"RUU back to stock" by what?
If you just installed 2.3.4 in PD15IMG.ZIP form - this IS the "RUU equivalent" for MT4G.
Try installing it again.
If it doesn't help - nothing you can do, besides trying to unlock bootloader (don't know if you can, having no OS to boot to) and then flashing recovery from it and any ROM from recovery.
what happens when you flash pd15img.zip ???
Sent from my T-Mobile myTouch 3G Slide using XDA App
Full wipe and installation of stock system.
Jack_R1 said:
"RUU back to stock" by what?
If you just installed 2.3.4 in PD15IMG.ZIP form - this IS the "RUU equivalent" for MT4G.
Try installing it again.
If it doesn't help - nothing you can do, besides trying to unlock bootloader (don't know if you can, having no OS to boot to) and then flashing recovery from it and any ROM from recovery.
Click to expand...
Click to collapse
ruu.exe??? as with any other htc phone?
androph said:
what happens when you flash pd15img.zip ???
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
it always fails
Jack_R1 said:
Full wipe and installation of stock system.
Click to expand...
Click to collapse
i have no recovery
og92 said:
ruu.exe??? as with any other htc phone?
Click to expand...
Click to collapse
No, for MT4G there's no such thing.
You could try flashing Panache's RUU.exe, possibly using goldcard. It might work.
og92 said:
it always fails
Click to expand...
Click to collapse
It always fails? What do you mean? Do you get errors such as "failed-PU"? In that case, you are bricked my friend. Also try saranhai's guide..http://forum.xda-developers.com/showthread.php?t=1394238