Related
Hi guys, I have an issue with Sat Nav volume. I will try to break it down simply:
Sat Nav [CoPilot and Navigator tested]
Music app [PowerAMP and HTC Music tested]
Audio cable [3.5mm audio jack - plugged into car stereo]
Sound settings all full [set in Quick Settings and also manually set Navigation Volume when Google Navigator is running]
Audio is fine when any music app playing [with or without cable]
Audio is fine when any Sat Nav voice playing [with or without cable]
Audio is fine when any Sat Nav + any Music app both playing (music cuts out and voice becomes audible) [WITHOUT CABLE]
--- Sat Nav voices becomes too low to hear when both Sat Nav and Music playing with cable plugged in ---
This was working perfectly fine on stock HTC (both Froyo and GB) with kernel Buzz OCUV 1.0.6.
I have only seen this issue since flashing Android Revolution HD 5.1.9 > 5.1.10 > 5.1.11 . I have tried different kernels ( Stock ARHD > UnityV2 > UnityV3 ) and also retried Buzz OCUV 1.0.6 but the issue still remains.
Does anybody have any ideas as to what could be the problem?
Anybody have any ideas at all?
Sent from my Desire HD using XDA App
I've always had this issue too, All I have been doing is lower the music volume to half, set Navigation Volume to Full and then increase the car volume instead
According to google support forum, It looks like the issue is caused by GB 2.3.3, 2.3.2 does not have this problem so it seems downgrading is the only fix.
I have the same exact problem unfortunately.
I'm guessing you're using Google Navigation instead of HTC's Locations Premium Navigation?
I'm currently on 2.3.3, and I don't really have a problem with any bad navigation volumes. If you're not okay with paying to try out Locations Navigation, don't worry, you have a 1 month worldwide navigation license which you can activate and use for free without any restrictions.
Thanks for your 'input' Vious, but the issue remains no matter what satnav is used, premium or not.
It is a confirmed 2.3.3 issue with multiple threads on the google code forums
Sent from my Desire HD using XDA App
I hope they fix this soon. Such a GIGANTIC issue... i can't believe this isn't at all critical for them.
Same problem for me, Copilot support could not fix it for me also, claiming it was a problem with android not them. Used to work on Version 8.x.x.606
If this affects all versions of Android above 2.3.2 then it looks as if I have little choice but to buy an iphone or wp7 phone next, Google are unbelievable sometimes!
6 months and still no fix, I love Android and would hate to switch but this is a complete joke!!!
http://code.google.com/p/cyanogenmod/issues/detail?id=3165
http://www.google.com/support/forum/p/Google+Mobile/thread?tid=794d84c209f5ad2d&hl=en
http://code.google.com/p/android/issues/detail?id=15690
I know this is an old thread, but I wanted to share my solution for this same problem that I've been having since upgrading to the new gingerbread. Note though that this is no longer an issue if you're using the latest google navigation app, but if you're like me and you like to use an offline nav app like CoPilot, then this solution should work for you.
Since this problem was introduced in gingerbread 2.3.3, I thought I would try replacing the libaudiopolicy.so library with one from a gingerbread 2.3.2 rom I had laying around and voila, that seemed to have solved the problem! I haven't tested this thoroughly, but it seems to be working so far. I hope this helps anyone else out there that is still suffering from this issue.
Could you post the file? Also, have you encountered any issues so far?
Perhaps post this in the previously mentioned google code pages for more testers....
Sent from my Desire HD using XDA App
Here you go! This one is for sense based roms.
No issues so far!!
Perhaps when I have a little bit more time, I'll post a link to this thread in those referenced google pages.
hexion said:
Here you go!
No issues so far!!
Perhaps when I have a little bit more time, I'll post a link to this thread in those referenced google pages.
Click to expand...
Click to collapse
Nice one I'll give this a try
I presume the libaudiopolicy.so file you posted is from a Sense ROM, it didn't work for me as I'm running BlackIce which is CM based.
Downloaded an early CM7 nightly based on 2.2.3, copied that file over and it worked!
I have updated the previously referenced Google pages.
Attached is the CM7 2.3.2 libaudiopolicy.so if anyone wants it.
rgrover said:
I presume the libaudiopolicy.so file you posted is from a Sense ROM, it didn't work for me as I'm running BlackIce which is CM based.
Downloaded an early CM7 nightly based on 2.2.3, copied that file over and it worked!
I have updated the previously referenced Google pages.
Attached is the CM7 2.3.2 libaudiopolicy.so if anyone wants it.
Click to expand...
Click to collapse
Yes, sorry, forgot to mention that. I've updated my post so now it won't confuse anyone else.
I'm glad the one from CM7 worked for you!
hexion said:
I know this is an old thread, but I wanted to share my solution for this same problem that I've been having since upgrading to the new gingerbread. Note though that this is no longer an issue if you're using the latest google navigation app, but if you're like me and you like to use an offline nav app like CoPilot, then this solution should work for you.
Since this problem was introduced in gingerbread 2.3.3, I thought I would try replacing the libaudiopolicy.so library with one from a gingerbread 2.3.2 rom I had laying around and voila, that seemed to have solved the problem! I haven't tested this thoroughly, but it seems to be working so far. I hope this helps anyone else out there that is still suffering from this issue.
Click to expand...
Click to collapse
Thanks hexion, you see this is exactly what I have been trying to say all this time - it must be something slightly changed in some audio file somewhere between 2.3.2 and 2.3.3 . I just have no idea about Linux / Android so never knew where to look for such things.
Now all we need is to compare these to see where the changes lie and try to patch the most current libaudiopolicy.so with only the previous Navigation settings, leaving all other new things as is.
rgrover said:
I presume the libaudiopolicy.so file you posted is from a Sense ROM, it didn't work for me as I'm running BlackIce which is CM based.
Downloaded an early CM7 nightly based on 2.2.3, copied that file over and it worked!
I have updated the previously referenced Google pages.
Attached is the CM7 2.3.2 libaudiopolicy.so if anyone wants it.
Click to expand...
Click to collapse
Hey rgrover, I'm also on CM7.1 Nightly. I tried renaming old file to libaudiopolicy.so.bak and copied the file you supplied into system/lib but now my device will not load past white HTC screen after reboot. Any advice?
UPDATE: it's OK it seems it was just a permissions problem. Everything working fine now
Hexion, you f**king treat !
My DHD is now pure perfection, with CM7.1 installed and this Sat Nav fix. Everything works at it should and I need nothing else from a phone (apart from battery life, but hopefully I can get Daemon Controller on CM7 at some point with better kernel).
If I had mone I would buy you a bottle JD (actually I would buuy myself one lol, maybe share with you XD )
Apparently, this fix for sat nav apps does not work for Google Navigation and TuneInRadio according to chykal1 on the google page. Music will not be lowered when the nav voice comes on. So if you use TuneInRadio a lot, you probably shouldn't apply this fix. Maybe when someone patches the latest libaudiopolicy.so, then we'll have a true solution.
This thread don't update any more.
This post [CM-9.0.0-RC0-2012.03.03-KANG-XT720-J.Y.Daddy] is latest update.
From now on, please use fjfalcon's CM9.
Thanks.
------------------------------------------------------------
This rom is just alpha version.
And i did not test much.
Now sensors working!
[Not works]
camera not work.
accelerated video decoding using TI DSP not work. (from nadlabak's notice)
[nadlabak's original thread]
CM9 http://forum.xda-developers.com/showthread.php?t=1445209
[Outline]
CM9 ROM customized.(nadlabak's Milestone ROM based)
Phone Model : Motoroi XT720
Kernel Based Rom : STSKT_N_79.33.50R (Android 2.2.1)
[Install for Motoroi-XT720]
1) RSD for STSKT_N_79.33.50R (Android 2.2.1)
2) root
3) OpenRecovery install
4) ROM download and copy (/sdcard/OpenRecovery/updates)
5) OpenRecovery boot
6) Wipe Data / Factory reset (Please reset first!)
7) Apply Update
8) reboot (first boot takes a long time)
[Mirror]
http://min.us/mmDjsB8g0
[Credit]
nadlabak(kabaldan)
J.Y.Daddy said:
[Not works]
sensor's not work. (need someone help)
camera not work. (from nadlabak's notice)
accelerated video decoding using TI DSP not work. (from nadlabak's notice)
Click to expand...
Click to collapse
For now - this problems really deep inside. Video system in android 4 changed mostlly.
Wow, I knew that you wouldn't abandon us.
Edit: Just loaded it up. Really fast. Obviously, a lot of problems but nevertheless, really good start.
No market?
No wifi?
And an error kept popping up, in part english, part Korean, at every new screen, stating it will eliminate something.
So glad to have you back
rationalthinker1 said:
Wow, I knew that you wouldn't abandon us.
Edit: Just loaded it up. Really fast. Obviously, a lot of problems but nevertheless, really good start.
No market?
No wifi?
And an error kept popping up, in part english, part Korean, at every new screen, stating it will eliminate something.
Click to expand...
Click to collapse
Wifi is ready! light sensor seems to working fine.
but gravity sensor not working, camera not working
Okay it booted fast I was able to sign in to Google.
I did some ram tweaks I was able to get 70+.
I used a bootfix to get it booted.
I will get even more ram after sensors get fixed.
Looking forward in using cm9.
Sent from my XT720 using xda premium
Update.
Market works,wifi works.
I been using cm9 all day I only wish sensors worked
Sent from my XT720 using xda premium
Hi still using cm9.
Replace launcher with nova launcher replace keybroard to smart key broads.
Ram is avg 64.
Any body working on sensors.
Thanks.
Sent from my XT720 using xda premium
It's awesome & sweet, man!
I was tried with CM9 but no luck and have not much time to play around with it. Now you are back with it, that great!
Thumb up & keep great working.
I will try it soon
Tried, and this is my experiences:
Good things:
- Speed is incredible fast with many apps I installed on last CM7.X
- Wifi, 3G works
- Home button not work (cannot go home by pressing Home button) EDITED: Home button is go with different behavior compared with GingerBread, so press & hold it to see list of recent & running app, this way it work for me
and many things work as expected.
and Bad things:
- Screen rotation is not work well: look it start to work but mostly forced in landscape mode (in launcher, app) some time it go portrait for dialing screen, error message ... I was unchecked auto rotation options but not help.
- Call not work for me, it go end nearly immediate after I press call.
- SMS not work, EDITED: work after reboot, may it has blocked by some overload operations.
- Net monitor through some exceptions due: /proc/net/xt_qtaguid/stats not exist, we need kernel module for this stuff.
- Cam not work (of course )
I don't see where to customize Cyanogen such as fast switch widget on notification bar, look like we are missing Cyanogen Settings
I have problem with IO schedule in CM7 and was remove dalvik-cache from list of app2ext startup script and it solved 50% of mine. I used `lsof` to see what's going to use /sdcard & /sd-ext and see that almost operations come from background apps like launcher, theme. I think we should avoid to use bind mount to SD's ext partition to get better speed. Also use `vmstat` command will see sometime 1-3 applications block IO process and it will cause IO wait almost full (about > 90).
Anyone face problem like me? and what's solution you guys was used to solve it?
Will try to tweak it and fix some buggy if possible, keep the good work guys!
I see some have offered to help with cm9 but I'm dispointed in these forms .
The first thing thats needs to be fixed are sensors.
The camera will be the hardest to fix.
I believe the defry has the same sensors as our xt can someone do a port for are xt.
The worked good for me but their seems to be battery drain.
I would like to see some team work on this cm9.
Thanks J.Y.Daddy for your help.
Sent from my XT720 using xda premium
Anyone know the way to let android force display in portrait mode?
Currently sensors not work correctly then it always go landscape mode, it is weir.
I tried some prop in but no luck.
About sensors I tried one from CM-7.1 but no luck, look like ICS using different stuff for use sensors then fix in framework may help but I don't have time to check it out.
tiger2wander said:
Anyone know the way to let android force display in portrait mode?
Currently sensors not work correctly then it always go landscape mode, it is weir.
I tried some prop in but no luck.
About sensors I tried one from CM-7.1 but no luck, look like ICS using different stuff for use sensors then fix in framework may help but I don't have time to check it out.
Click to expand...
Click to collapse
Un-check the box for: Settings --> Display --> Auto-Rotate Screen
Unless....of course....that is being overwritten by something in CM9.
I tried it already, unchecked auto rotate option in display setting & Trebuchet but no luck.
mchlbenner said:
I see some have offered to help with cm9 but I'm dispointed in these forms .
The first thing thats needs to be fixed are sensors.
The camera will be the hardest to fix.
I believe the defry has the same sensors as our xt can someone do a port for are xt.
The worked good for me but their seems to be battery drain.
I would like to see some team work on this cm9.
Thanks J.Y.Daddy for your help.
Sent from my XT720 using xda premium
Click to expand...
Click to collapse
we can always use a 3rd party Camera App, if we can not fix the camera, right?
or are you referring to the kernel knowing there's a camera attached to the phone?
AllGamer said:
we can always use a 3rd party Camera App, if we can not fix the camera, right?
or are you referring to the kernel knowing there's a camera attached to the phone?
Click to expand...
Click to collapse
ICS changed the camera API significantly. I don't think anyone's figured out how to use the older libraries yet. Non-functioning camera is pretty common at the moment.
We really to find a fix for the sensors first then fix other things.
Sent from my XT720 using xda premium
For camera, AFAIK we need to write a new kernel module for it as ICS is using HAL then we must have:
- /system/lib/modules/camera.ko
- /system/lib/hw/camera.sholes.so
EDITED: I've just tried with hw/camera.goldfish.so & camera.ko from MS2 then Camera app just loaded with colored box pinging, at least it not show "Cannot connect to Camera" message
Stskt_n_79.33.50r
hey guy where can i get STSKT_N_79.33.50R
What are you using motorio or milestone xt720.
If you using motorio go J.Y.Daddy cm7 thread the link is their.
Sent from my Milestone XT720 using xda premium
New version at http://forum.xda-developers.com/showthread.php?t=1528084
Hi,
First of all, sorry for posting this in general forum, but as you can see this is my first post...
This is a snapshot of my work on bringing camera support to Tezet's Milestone2 ICS port.
This build is not intended for daily use. The camera crashes when changing mode to video or panorama, and when exiting Camera app (though this is not visible ). But preview is working (as far as I know this is better than Defy), and I took ~20 photos in a row without problems.
Regarding the build itself:
- it's based on CM9 snapshot from Feb 25
- there's a bug with contacts showing as "Unknown" in the dialer (while you dial). As far as I know it is the same on latest Defy builds, so I assume this is an upstream bug from CM9
- it may contain more (or less) bugs from Tezet's builds. It's simply different, though I use builds from my branch since early January on daily basis
- the fix for SIM lock pin is not included
- it should be possible to load this without factory reset on top of Tezet's builds and the other way around, though the last time I've tried this was two weeks ago...
- there's no need to wipe dalvik cache - the update script does this
The work is based on Atrix ICS camera support, with added overlay emulation.
What is working:
- live preview
- zooming
- flash
- focus
- exposure compensation etc
- taking photos
- ... probably not much more
What is not working:
- panorama shots
- video recording
- a lot more
Would anyone be brave enough to check it?
I highly recommend to do a nandroid backup before trying it.
Latest version for phones with European GB kernel:
http://cm9-milestone2.googlecode.com/files/CM9-20120227-NIGHTLY-milestone2-eu.zip
Latest version for all other phones:
http://cm9-milestone2.googlecode.com/files/CM9-20120227-NIGHTLY-milestone2-ch.zip
If your phone is stuck on red Moto logo, it means you have chosen a wrong version and you need to recover your phone from the SBF file.
Repository:
repo init -u git://github.com/rondoval/android.git -b ics
All the credits go to:
- Tezet, for the Milestone2 port
- tpruvot, Quarx2k, for their tremendous efforts on Defy support (and thus Milestone2)
- whole Atrix-Dev-Team, Raviprasad V Mummidi, zivan56 for their tremendous work on the camera driver
Guess I missed this thread because it is in General Not your fault though.
I will test it as soon as I got some spare time. Sounds promising.
Thanks a lot for your efforts!!
What about bluetooth and wi-fi tethering? Are they working? I'm asking since they are working on Defy's GB kernel build.
And it would be better if some MOD can move this to DEV section.
Can we wait with that moving till I reach 10 posts?
I have merged some tethering code from Defy. Havent tested it though. I think I would have to use Defy's wifi driver, not CM9 default for that to work.
Bluetooth is not here.
sounds good !!
hmm.. so that you can respond to ppl. That makes sense.
I have installed it. It works fine. The camera starts and works as indicated.
One problem that everyone is going to notice first up is that if you make an outgoing call to a contact, the dialer shows unknown and all outgoing calls accumulate under 'unknown'.
And yes, there is no bluetooth.
Regarding the dialer: that's what I wrote about in the first post... I think it's the same on Defy right now.
Okay. I don't know about Defy but it is working on Tezet's ROM.
BTW, thanks again for porting the Atrix camera fix to MS2.
It's working on Tezet's build, but it's a month older. It was working on mine before I polled CM9 changes last saturday. I'll look into this.
rondoval said:
It's working on Tezet's build, but it's a month older. It was working on mine before I polled CM9 changes last saturday. I'll look into this.
Click to expand...
Click to collapse
You are the savior of our milestone 2. Now we have two devs rondoval and tezet -- greatest honor to both of you
downloading,will test later
edit:I think you can open another thread in dev section once you have reach 8 posts so more people will notice it.
rondoval said:
It's working on Tezet's build, but it's a month older. It was working on mine before I polled CM9 changes last saturday. I'll look into this.
Click to expand...
Click to collapse
Will be hoping that the wrinkles can be ironed out and we can have a better functioning CM9. And we may soon come out of ALPHA stage and move to BETA.
I noticed that there is no file manager in your build.
tested. camera working fine with preview and taking photo.
@sahilarora911:yep, there is no file manager...
This is really nice!
Did someone test mobile hotspot/wifi tether? if not would someone? ^^
regards
Steven
For unknown bug go to dialer setting and click show numbers or something like that already posted on defy page......
Sent from my MB525 using XDA App and don't forget to say thanks
Fist of all, would like to thank you for your great work.
Camera does work indeed...that's a small step for a man and giant leap for MS2
BTW is it just me or noone else is bothered this not working Caps Lock on HW keyboard?
Thanks again.
devilthehellraiser said:
For unknown bug go to dialer setting and click show numbers or something like that already posted on defy page......
Sent from my MB525 using XDA App and don't forget to say thanks
Click to expand...
Click to collapse
Thanks for that but the option gets greyed out really quickly . It has to be done fast. Got it fixed.
The option you have to select is dialer/dialer settings/additional setting/caller ID/show number
Megalith27 said:
BTW is it just me or noone else is bothered this not working Caps Lock on HW keyboard?
Click to expand...
Click to collapse
Caps lock on HW keyboard seems to be fine.
Edit: wi-fi hotspot works with Barnacle wifi tether.
Thanks for this build.
It boot up on defy. (GB kernel build)
Encryption faild. How can i disable this?
edit: fixed Data was wrong mounted on defy it is mmcblk25 and not 26
sahilarora911 said:
Thanks for that but the option gets greyed out really quickly . It has to be done fast. Got it fixed.
The option you have to select is dialer/dialer settings/additional setting/caller ID/show number
Click to expand...
Click to collapse
Thanks, the way my call log looks was starting to annoy me Works here too, though I don't get why such a change.
I removed the file manager (and Torch I think?). The file manager is not included in official CM9 branch, besides I don't like it anyway
Camera works for defy with bayer module.
I have to add this to build.prop
ro.media.capture.flip=horizontalandvertical
BIG BIG THANKS
Thanks, rondoval! Awesome!
IN YOUR FACE, MOTOROLA!!!
Here is the link.
CM 10.1 released for Tab 10.1 3G
http://droidbasement.com/galaxy/roms/cm10.1/p4/
Lmfao, love it how you post the link for the 4.2 ROM, but give the right informations... It's not only for the 3G it's also for the WiFi only version as well,
akardr23 said:
Here is the link.
CM 10.1 released for Tab 10.1 3G
http://droidbasement.com/galaxy/roms/cm10.1/p4/
Click to expand...
Click to collapse
I hate the new position of the back-home-recent buttons, they're a lot uncomfortable imho
DefQoN_BE said:
Lmfao, love it how you post the link for the 4.2 ROM, but give the right informations... It's not only for the 3G it's also for the WiFi only version as well,
Click to expand...
Click to collapse
Hey, does this work (stable) on the Samsung Galaxy Tab 10.1 4G version w/Rogers?
I currently have Jellybean (4.1.2?) and CM10.
Reported problems by me for my current setup:
-Home button does not work
-Browser wont load and will not launch
-Play store will not work (Error connecting) so i am not sure if my network is working
-Calender constantly crashes
-System UI constantly crashes
-Settings not available through the bottom right time slide up
-Many applications dont work
I am looking for something stable but apparantly, my current set up isnt working out. Any alternatives?
akardr23 said:
Here is the link.
CM 10.1 released for Tab 10.1 3G
http://droidbasement.com/galaxy/roms/cm10.1/p4/
Click to expand...
Click to collapse
please do not post direct links.
it should be droidbasement.com and you should read the posting(s) in its entirety.
H. Ess said:
Hey, does this work (stable) on the Samsung Galaxy Tab 10.1 4G version w/Rogers?
I currently have Jellybean (4.1.2?) and CM10.
Reported problems by me for my current setup:
-Home button does not work
-Browser wont load and will not launch
-Play store will not work (Error connecting) so i am not sure if my network is working
-Calender constantly crashes
-System UI constantly crashes
-Settings not available through the bottom right time slide up
-Many applications dont work
I am looking for something stable but apparantly, my current set up isnt working out. Any alternatives?
Click to expand...
Click to collapse
>for gapps download from this link http://forum.xda-developers.com/showthread.php?t=2049033
>camera working- both front and back
>bluetooth working
>auto rotation working
>wifi,GPS working
>faster,smoother
>upto 4 user accounts.quickly switch accounts
>google now not working
>flickering rarely occurs
>no driving mode
>no photosphere
>cant voice call by 2nd user
>voice call working by 1user but cant end the call
Guys, just don't forget to use the last recovery, version 6.0.2.3. Older versions will lead to problems. It is on the link that OP postes.
I did all the wipes and I have only one real problem here: the launcher animations are very laggy, honeycomb was better than that. Its strange because everything else is very, veeery smooth. It happens with nova and apex launcher too. Anyone else?
Oh, and I like the new interface.
Lucasdclopes said:
Guys, just don't forget to use the last recovery, version 6.0.2.3. Older versions will lead to problems. It is on the link that OP postes.
I did all the wipes and I have only one real problem here: the launcher animations are very laggy, honeycomb was better than that. Its strange because everything else is very, veeery smooth. It happens with nova and apex launcher too. Anyone else?
Oh, and I like the new interface.
Click to expand...
Click to collapse
Go into the trebuchet launcher settings and enable wallpaper hack. Lag will disappear. The lag is caused by the way the 4.2 launcher is rendering the wallpaper.
RileyGrant said:
Go into the trebuchet launcher settings and enable wallpaper hack. Lag will disappear. The lag is caused by the way the 4.2 launcher is rendering the wallpaper.
Click to expand...
Click to collapse
Thanks! I already did that, it really make things better. I also disabled wallpapers on apex launcher and now it is very smooth.
end call
akardr23 said:
>for gapps download from this link http://forum.xda-developers.com/showthread.php?t=2049033
>camera working- both front and back
>bluetooth working
>auto rotation working
>wifi,GPS working
>faster,smoother
>upto 4 user accounts.quickly switch accounts
>google now not working
>flickering rarely occurs
>no driving mode
>no photosphere
>cant voice call by 2nd user
>voice call working by 1user but cant end the call
Click to expand...
Click to collapse
Yup..i've been testing for cm 10 & 10.1 last 2 days from stock ICS. Here what i like:
-cm10 dark theme
-OC enable up to 1.4 GHz
-terminal emulator built in
-no "less use" apps pre-install
-msg experience are great
-bottom left n right notification & task bar (maybe coz i used to in windw environmnt)
What i dont know:
-the user acc is the same as phone profile,right? Its not like as admin & user.
-Call cant be ended in both cm (or it can?... )
-changing homescreen default page number to 2 or 3 only
I dont like the upper bar (in 4.2 i think -cant rmmber- ) coz it makes the screen smaller than usual
Revert back ti stock ICS with A1 kernel for now and waiting/trying to help fixing call end button
Google now is working
pershoot said:
please do not post direct links.
it should be droidbasement.com and you should read the posting(s) in its entirety.
Click to expand...
Click to collapse
hey pershot your 4.2.1 build it's really great
the only issues is, the keyboard dock issue. some buttons doesn't work well
Sent from my GT-P7500 using xda premium
pershoot said:
please do not post direct links.
it should be droidbasement.com and you should read the posting(s) in its entirety.
Click to expand...
Click to collapse
A link to the post is alright I assume? http://droidbasement.com/db-blog/?p=2919
I wish there was an "official" place to discuss this unofficial build.
Running it on p4wifi with the bootloader and recovery included in the folder with the rom. Wiped before flashing it and 121212 gapps.
Google Search closes (no notification) if you have updated to the latest from Google Play.
Voice typing force closes if you try to use it and you haven't updated to the latest Google Search from Google Play.
The post says 720p video has visual problems but it never starts to record for me. (I have the mentioned problem with CM10 nightlies.)
Google Talk crashes (no notification) after voice chat connects. (On CM10 it crashes as soon as you initiate it.)
The "3 quick key presses" description of the keyboard problem seems like an oversimplification.
Are the dual notification bars and centered home/switch buttons a 4.2 thing or is that related to a non-tablet build?
Is there a proper place to search for these problems and file them if they aren't listed? I don't mind doing some testing but I'm not sure what logs to provide. Is logcat good enough? What's the easiest way to pull that?
markachee said:
Are the dual notification bars and centered home/switch buttons a 4.2 thing or is that related to a non-tablet build?
Click to expand...
Click to collapse
that's a 4.2 thing.
DefQoN_BE said:
Google now is working
Click to expand...
Click to collapse
How did you get it to work?
Sent from my Xperia Pro using xda app-developers app
ajabhi95 said:
How did you get it to work?
Click to expand...
Click to collapse
Don't update Google Search (or uninstall it if you already did). Voice still won't work but the cards do.
markachee said:
Don't update Google Search (or uninstall it if you already did). Voice still won't work but the cards do.
Click to expand...
Click to collapse
Well Google Now is incomplete without voice so that's the reason I asked if Google Now worked for you. I I too face the issue of no voice. Hope this will be fixed in future updates. Really love this ROM's look and feel.
Sent from my GT-P7500 using xda app-developers app
akardr23 said:
>for gapps download from this link http://forum.xda-developers.com/showthread.php?t=2049033
>camera working- both front and back
>bluetooth working
>auto rotation working
>wifi,GPS working
>faster,smoother
>upto 4 user accounts.quickly switch accounts
>google now not working
>flickering rarely occurs
>no driving mode
>no photosphere
>cant voice call by 2nd user
>voice call working by 1user but cant end the call
Click to expand...
Click to collapse
HafTah said:
Yup..i've been testing for cm 10 & 10.1 last 2 days from stock ICS. Here what i like:
-cm10 dark theme
-OC enable up to 1.4 GHz
-terminal emulator built in
-no "less use" apps pre-install
-msg experience are great
-bottom left n right notification & task bar (maybe coz i used to in windw environmnt)
What i dont know:
-the user acc is the same as phone profile,right? Its not like as admin & user.
-Call cant be ended in both cm (or it can?... )
-changing homescreen default page number to 2 or 3 only
I dont like the upper bar (in 4.2 i think -cant rmmber- ) coz it makes the screen smaller than usual
Revert back ti stock ICS with A1 kernel for now and waiting/trying to help fixing call end button
Click to expand...
Click to collapse
I am using Jelly Bean 4.1.2 CM 10 | cm-10-20121218-NIGHTLY. Phone dialer app cannot end calls. E-mail app cannot add more than one account.
As for multi user on CM 10.1 (JB 4.2) I do believe it is because multi user originally intended to be used only for tablet (which means no calling). Multi user is not yet available on phone (least for the stock ones). Wait for some hack for it.
Anyone knows a thread where I can follow the nightly updates for CM10 development? I can't find the right 'portal' for it
HafTah said:
Yup..i've been testing for cm 10 & 10.1 last 2 days from stock ICS. Here what i like:
-cm10 dark theme
-OC enable up to 1.4 GHz
-terminal emulator built in
-no "less use" apps pre-install
-msg experience are great
-bottom left n right notification & task bar (maybe coz i used to in windw environmnt)
What i dont know:
-the user acc is the same as phone profile,right? Its not like as admin & user.
-Call cant be ended in both cm (or it can?... )
-changing homescreen default page number to 2 or 3 only
I dont like the upper bar (in 4.2 i think -cant rmmber- ) coz it makes the screen smaller than usual
Revert back ti stock ICS with A1 kernel for now and waiting/trying to help fixing call end button
Click to expand...
Click to collapse
>ya ..it is user account like admin and second user.there is profile separately and day dreams
>ya for me also cant end call.it simply shows hanging up
>homescreen no cant be changed
>me too not like upper bar.but it is really super.you can hide it and use full screen.
markachee said:
Don't update Google Search (or uninstall it if you already did). Voice still won't work but the cards do.
Click to expand...
Click to collapse
How to uninstall google search updates??
I updated google search.when i opened ,it crashes after sometime.but voice command working[instead of clicking search bar i clicked mic icon]
Hi!
I have the following issue: My touchscreen-keyboard keeps disappearing while writing. Not sure why. It shows the same animation as if I'd click on a part of the screen where the keyboard isn't. Perhaps a problem with some kind of calibration? Besides that the touchdisplay would work fine. It prmarily happens using some web-based applications like dolphin and google task organizer. Terminal-Emulator works fine fe.
Actually I am using my A501 with Android 4.2.2, Kernel 3.7.8-digetx-thor-7.3.7-t26, CyanogenMod version is Tegrawners JB-MR1 ROM v8 (thor & digetx)
Any more infos I could get about this topic? Unfotunately I can't find something live /var/logs.
Thx,
Andy
Scythwolf said:
Hi!
I have the following issue: My touchscreen-keyboard keeps disappearing while writing. Not sure why. It shows the same animation as if I'd click on a part of the screen where the keyboard isn't. Perhaps a problem with some kind of calibration? Besides that the touchdisplay would work fine. It prmarily happens using some web-based applications like dolphin and google task organizer. Terminal-Emulator works fine fe.
Actually I am using my A501 with Android 4.2.2, Kernel 3.7.8-digetx-thor-7.3.7-t26, CyanogenMod version is Tegrawners JB-MR1 ROM v8 (thor & digetx)
Any more infos I could get about this topic? Unfotunately I can't find something live /var/logs.
Thx,
Andy
Click to expand...
Click to collapse
This is an issue with jb 4.2.2. It happens on all jb 4.2.2, and not just on thor's ROM. The only thing we can do now is to use an alternative keyboard(third party keyboard).
Sent from my HTC myTouch 4g using Tapatalk 2
10507 said:
This is an issue with jb 4.2.2. It happens on all jb 4.2.2, and not just on thor's ROM. The only thing we can do now is to use an alternative keyboard(third party keyboard).
Sent from my HTC myTouch 4g using Tapatalk 2
Click to expand...
Click to collapse
Damn. Was so afraid you would say this. Interesting that I only found articles about 3rd party keyboards closing during typing