[Q] Custom ROMs/stuff with branded X8? - XPERIA X8 General

Is it possible to install Root/xRecovery/Custom Modules/JIT/Custom ROMs on a branded Xperia X8?

DustArma said:
Is it possible to install Root/xRecovery/Custom Modules/JIT/Custom ROMs on a branded Xperia X8?
Click to expand...
Click to collapse
i think yes coz i dont think branded xperia have diff rom from unbranded one how bout u start with root it, then xrecovery then backup ur rom first then do others

kecil26 said:
i think yes coz i dont think branded xperia have diff rom from unbranded one how bout u start with root it, then xrecovery then backup ur rom first then do others
Click to expand...
Click to collapse
I managed to root it, installed the APK version of xRecovery, installed xRecovery from there but I can't seem to be able to actually get into xrecovery, flashtool's reboot into xrecovery option is greyed out.
Furthermore, the Eclair version this x8 is running is outdated:
Baseband 06 with 2.0.1.A.0.47 while the latest one is 2.0.2.A.0.24, I tried flashing the latest one for this baseband using flashtool with the files from this post but it didn't stick, phone was still running 2.0.1.A.0.47 after the process was completed. SEUS says the phone is running the latest version.
*EDIT* Success, the APK installer wasn't working properly, so I did a manual install and now xRecovery is working *EDIT*

Seriously u should first update to 2.1.1.A.0.6 first which is the latest version..coz most of app here required latest baseband (15) and latest build to work properly

kecil26 said:
Seriously u should first update to 2.1.1.A.0.6 first which is the latest version..coz most of app here required latest baseband (15) and latest build to work properly
Click to expand...
Click to collapse
I tried with PC Companion and SEUS, both say that the current version is the latest, and I don't know if I can just flash the newer version in using flashtool.

DustArma said:
I tried with PC Companion and SEUS, both say that the current version is the latest, and I don't know if I can just flash the newer version in using flashtool.
Click to expand...
Click to collapse
Ofc you can use flashtool to flash basebands and latest frimware

Dare-Devil Inside said:
Ofc you can use flashtool to flash basebands and latest frimware
Click to expand...
Click to collapse
Great, thanks.

Related

[Q] Baseband Update

Hey guys
I am interested in installing custom ROMs, but all are to the latest version of baseband. My version is the xx06. How do I upgrade to version xx15?
I'm still a noob...
Gugz said:
Hey guys
I am interested in installing custom ROMs, but all are to the latest version of baseband. My version is the xx06. How do I upgrade to version xx15?
I'm still a noob...
Click to expand...
Click to collapse
how bout u update ur x8 through pc companion first? pc companion will update ur rom + ur baseband
Edit: remember, updating will wipe all ur internal data.so backup ur data first.
i just update to **15 but i dunno how to revert it back to **06
mdrizal said:
i just update to **15 but i dunno how to revert it back to **06
Click to expand...
Click to collapse
and y u want to revert back to 006? you can find the 006 version in android dev thread if not mistaken.
*autopromotion mode on*
http://forum.xda-developers.com/showthread.php?t=1011071
*autopromotion mode off*
Here you'll learn how to flash anything you want and links to threads containing flashtool and basebands. But why would you flash older baseband, which doesn't support custom ROMs, is beyond me.

[Q] reinstall 2.1 by SE

Hello guys!
I was wondering how to restore my phone to 2.1 by SE I've 2.2.1 beta 2.1 mici cm
Have I just to use restore in PCC or SEUS?
thanks in advance!
you should do a backup before install of minicm. Yes, with seus you can restore 2.1, but if you bought your phone from a provider (tmobile) later you need to edit build.prop file in system dir, to get warranty back.
ok thanks, i've a unbranded x8 and I haven't done the backup because I had to upgrade to 2.1.1 from 2.0.1 so i had no features installed
so i have to click repair and it's ok?
Siso93 said:
ok thanks, i've a unbranded x8 and I haven't done the backup because I had to upgrade to 2.1.1 from 2.0.1 so i had no features installed
so i have to click repair and it's ok?
Click to expand...
Click to collapse
xRecovery backup is the best, that can save your phone if it bricks!
aerosmith1 said:
you should do a backup before install of minicm. Yes, with seus you can restore 2.1, but if you bought your phone from a provider (tmobile) later you need to edit build.prop file in system dir, to get warranty back.
Click to expand...
Click to collapse
Wouldn't it be easier to flash clean 1.6 and then install the branded update via SEUS? Then he wouldn't need to root it in the first place. Unless he wants to
how much was the unbranding and where did you done it?
Just click repair on seus and thats all.
I've no idea whatsoever, I don't use tmobile, I simply suggested that installing pure 1.6 and then updating the phone with SEUS will give a similar result as setting build.prop for a proper network - SEUS will install you a proper version for your network anyway.

baseband...

somewhy i can't change the baseband... mayable it's because im running freex10 2.2? i always get ''unknown baseband'' and when i do a factory rest nothing happens...
the rom probably doesn't support the baseband you are flashing.....
so would the original se's rom's support 2.0.49 or 2.0.52?
a2ha said:
so would the original se's rom's support 2.0.49 or 2.0.52?
Click to expand...
Click to collapse
yeah it should for sure....
You could flash the baseband patch to fix the problem as well in case you want to use a different baseband with a 2.2 rom then recommended
but i am now using the original 2.1 2.1.A.0.435 and after i flash .49 it still says Unknown...
a2ha said:
but i am now using the original 2.1 2.1.A.0.435 and after i flash .49 it still says Unknown...
Click to expand...
Click to collapse
You've to use .54 .55 or .58 on that ROM.
PlayGunsta said:
You've to use .54 .55 or .58 on that ROM.
Click to expand...
Click to collapse
hmmm.. is there any way to flash .49 or .52 then? i need the Miui's rom
a2ha said:
hmmm.. is there any way to flash .49 or .52 then? i need the Miui's rom
Click to expand...
Click to collapse
you can use .55 or .58 on froyo miui, just flash the baseband patch!!
or look for rendeiro's baseband collection thread and flash .49 or .52 with flashtool
Try cobs miui you can use .49/.52, or his has the patch included in the downloaded file if you want to use .54 , .55 or .58. Killer rom too, no bugs and fast as hell
fiscidtox said:
you can use .55 or .58 on froyo miui, just flash the baseband patch!!
or look for rendeiro's baseband collection thread and flash .49 or .52 with flashtool
Try cobs miui you can use .49/.52, or his has the patch included in the downloaded file if you want to use .54 , .55 or .58. Killer rom too, no bugs and fast as hell
Click to expand...
Click to collapse
do i install the baseband patch thru xrecovery?
a2ha said:
do i install the baseband patch thru xrecovery?
Click to expand...
Click to collapse
Yes install the rom then flash the patch!
That's what I'm using now
Ok, thanks alot
If you need any help just email me
a2ha said:
Ok, thanks alot
Click to expand...
Click to collapse
And before installing the ROM don't forget to do this in xRecovery:
Factory reset
Wipe cache
Wipe dalvik cache
Wipe battery stats
Help with 3G in my x10i
Hello, I want to flash my xperia. I have an x10i with the original 2.1 2.1.A.0.435 with tmobile.. but Im using the hanset in Colombia with comcel, so 3G doesnt work.
I wonder if by flashing my hanset could I get 3G? what do I have to do?.
Also I would like a generic flash so when the gingerbread update arrives I could use SEUS for the update. Is it possible?. If I put a new rom in my hanset , is it possible to go back to the original handset?
Juanpix said:
Hello, I want to flash my xperia. I have an x10i with the original 2.1 2.1.A.0.435 with tmobile.. but Im using the hanset in Colombia with comcel, so 3G doesnt work.
I wonder if by flashing my hanset could I get 3G? what do I have to do?.
Also I would like a generic flash so when the gingerbread update arrives I could use SEUS for the update. Is it possible?. If I put a new rom in my hanset , is it possible to go back to the original handset?
Click to expand...
Click to collapse
No, 3G will not work because the phone does not have the necessary hardware.

(HowTo) Root YOUR (ARC S) (LT18i) Without unlocking bootloader

1. Flash this http://www.mediafire.com/?j5on1nw8obzejlw 0.42 generic world
2. Root your Phone with DooMLoRD_v4_ROOT-zergRush-busybox-su
3. Update over the air to 0.62
i´v just tried this and it works perfectly!
UPDATE
This rom is Generic Global Rom for LT15i, i dont know if that works similar to LT18, because i cant test it.
www.mediafire.com/?8ebba1p37e74b1v
check this out if you have LT15i.
thanks , I did it. downgrade to 42 and rooted.
Does the funktion "Don't wipe userdata" work at flashtools? (or loose i all my settings?)
Sent from my LT18i using XDA App
i whiped all my things befor i flashed Generic global! you can download any free recovery app and save anything after flashing and rooting and updating only download again an recover that all back
ok, thank you. i will make before a "Restore"-Point with the CWA-Installer. Then i flash the .42 from your link without "wipe data" and i will see, how it works
If it´s wok, everything is fine, if it doesn´t work, i flash a second time an "wipe data".
I will report....
Hopefully it will work properly coz I tried everything to fix the issue
Sent from my LT15i using xda premium
Jomangy said:
Hopefully it will work properly coz I tried everything to fix the issue
Sent from my LT15i using xda premium
Click to expand...
Click to collapse
ähm, i hope you have seen, that this is for LT18i (=ArcS)? (I do not know if the above mentioned link also works with your LT15i)
Glenfiddich01 said:
ok, thank you. i will make before a "Restore"-Point with the CWA-Installer. Then i flash the .42 from your link without "wipe data" and i will see, how it works
If it´s wok, everything is fine, if it doesn´t work, i flash a second time an "wipe data".
I will report....
Click to expand...
Click to collapse
does it work for you ?
yes of course. I have all datas (i don´t "wipe data") Now i´ve a rooted .62 with all my datas. Only my own Background was after the update not on my homescreen, but thats no problem.
Bevore I delete now the bloatware, i make a "restore"-point with CWA. So, if in the future a new update come (OTA), i can install the "untouched" .62 and OTA should work without flashing with flashtool.
may i ask something. link at the number 1. is't the original fw for LT18i?
yes this is original firmware firmware
first is LT18i
second is LT15i
Hi I am new here, I have an arc S 2.3.4 Build No. 4.0.2.A.0.42, will this process of rooting can work on my device? Just want to root to try overclocking my Arc S. Thank you in advance.
cleric28 said:
Hi I am new here, I have an arc S 2.3.4 Build No. 4.0.2.A.0.42, will this process of rooting can work on my device? Just want to root to try overclocking my Arc S. Thank you in advance.
Click to expand...
Click to collapse
yes u can. the easy way is using this http://forum.xda-developers.com/showthread.php?t=1321582. without unlock BL...
but after that easy way you cant update. coz than is your root loose
hackdima said:
but after that easy way you cant update. coz than is your root loose
Click to expand...
Click to collapse
Sorry for my ignorance bro, but what do you mean by you can't update because I will lose my device's root config? Are you referring to updating from 4.0.2.A.0.42 to 4.0.2.A.0.62 after rooting? But the instruction from the first post said that after rooting update to 0.62. Thanks.
Hi
I have just switched from HTC HD2 to Xperia Arc S.
I know all there is to know about flashing the HD2 (WinMo and Android), but next to nothing (yet) about Xperia. I gather that .62 can't be rooted yet, so you'll have to downgrade, root and then upgrade back to .62 OTA. Does that mean that it will also be possible to upgrade to ICS (when that's ready) from a rooted .62_)?
cleric28 said:
Sorry for my ignorance bro, but what do you mean by you can't update because I will lose my device's root config? Are you referring to updating from 4.0.2.A.0.42 to 4.0.2.A.0.62 after rooting? But the instruction from the first post said that after rooting update to 0.62. Thanks.
Click to expand...
Click to collapse
iv posted:
first downgrade to generic global
than root
than udate over the air
that ist not the same as update over the PC
sblar said:
Hi
I have just switched from HTC HD2 to Xperia Arc S.
I know all there is to know about flashing the HD2 (WinMo and Android), but next to nothing (yet) about Xperia. I gather that .62 can't be rooted yet, so you'll have to downgrade, root and then upgrade back to .62 OTA. Does that mean that it will also be possible to upgrade to ICS (when that's ready) from a rooted .62_)?
Click to expand...
Click to collapse
i don´t know . maybe only on generic global firmware
I have a lt18i...i rooted my phone and tried to update ota but installation fails. Its generic uk firmware. Nothing has been changed in the phone eg uninstalling system apps
Sent from my LT18i using Tapatalk
Please rtfm.
GENERIC WORLD not others. You cant update other firmware over the air.
Gesendet von meinem LT18i mit Tapatalk

How to switch your phone back to the default factory rom?

Guys i have flashed my arc s with many custom roms and i flashed basebands and kernels and all such stuffs.
I wanted to know now if i want to make my phone back to like it was out of box, should i just flash the firmware via flashtools?
Will everything be same like new? (Baseband, Kernel)
Wifi, 3g etc everything will be normal like before just by flashing a official generic rom (Not to flash baseband or kernel or so?)
Thank you
badboyofpersia said:
Guys i have flashed my arc s with many custom roms and i flashed basebands and kernels and all such stuffs.
I wanted to know now if i want to make my phone back to like it was out of box, should i just flash the firmware via flashtools?
Will everything be same like new? (Baseband, Kernel)
Wifi, 3g etc everything will be normal like before just by flashing a official generic rom (Not to flash baseband or kernel or so?)
Thank you
Click to expand...
Click to collapse
If your bootloader is locked, you can use Sony Update Service.
If bootloader is unlocked, you cannot use the Update Service, you would only have Flashtool left to flash a stock ROM on your phone.
僕のLT18iから送られてきた
popthosegaskets said:
If your bootloader is locked, you can use Sony Update Service.
If bootloader is unlocked, you cannot use the Update Service, you would only have Flashtool left to flash a stock ROM on your phone.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
thnx for the reply.
so i just have to flash the official rom. thats it. right?
no need to flash kernel and baseband again? (i feel it comes in the rom itself, am i right?)
Yes
badboyofpersia said:
thnx for the reply.
so i just have to flash the official rom. thats it. right?
no need to flash kernel and baseband again? (i feel it comes in the rom itself, am i right?)
Click to expand...
Click to collapse
Yes, official ftf files includes kernel and basebands.
neverhave2worry said:
Yes, official ftf files includes kernel and basebands.
Click to expand...
Click to collapse
thnx alot for clearin the doubt :victory::victory:
popthosegaskets said:
If your bootloader is locked, you can use Sony Update Service.
If bootloader is unlocked, you cannot use the Update Service, you would only have Flashtool left to flash a stock ROM on your phone.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
You can also relock bootloader with Flashtool and then use Sony Update Service to fully restore.
Someguyfromhell said:
You can also relock bootloader with Flashtool and then use Sony Update Service to fully restore.
Click to expand...
Click to collapse
But why you want to lock bootloader with Flashtool and recover with Sony Update Service when you can recover with Flashtool alone?
僕のLT18iから送られてきた

Categories

Resources