Related
Having recently bought my son a Nintendo DS, I noted that in the accessory pack I got with it, it came with 2 screen protectors that are semi-rigid. They're quite a bit thicker than one that shipped with my phone, and don't flex and bend like thin paper. They also don't seem to affect sensitivity of the touch screen in any way, as well as being perfectly sized to the screens and were invisible once fitted.
Are there similar protectors for the TyTn 2? I'd love such a protector as it'd be FAR easier to fit, and provide much better protection to the screen.
Rigid Screen Protectors
I have come across these. The ones I tried were made by "Martin Fields" product number MFOP-HTCTyTN-T
A right bloody bastard to fit as they are very slighty oversized. Perhaps this is done purposly so the protector fits into the gap around the edges of the screen?
Very clear and reasonably priced compared to the OEM product. They do work extremely well (once fitted).
Rgs,
J
Thanks. I'll check em out.
invisibleSHIELD.. That's all I have to say.
oH, view the demo also.. its well worth it.
I just checked my little brother's DS box, hoping to find the screen protector but nothing there but manuals =(
Any reference on how firm and rigid the MField or InvS are?
Well, from the video, the invisibleShield isn't the slightest bit rigid, though if it lives up to its claims, that wouldn't matter. I ordered a Martin Fields one earlier so I'll see how good that is.
It's not just the rigidity for protection though. A rigid protector will be a LOT easier to fit...
Beleave me, MF is rigid. And yes, it is easy to install but remember to clean the surface of the screen. This part is very important. If you do it right, it will install in less than 30 seconds and you will struggle to see the difference between no protector and MF.
Oh I know that. I'll be cleaning it very carefully and making sure there's no dust about when I fit it! Don't want dust under the thing!
Just wish it'd hurry up and arrive!
boxwave
The boxwave protectors are much thicker than average ones, are washable, and work great. They are about as thick as the psp protectors, e.g. more like a hard plastic sheet, I'm not sure what the ds ones are like.
http://www.boxwave.com/products/cle...crystal-screen-protector-htc-tytn-ii_2905.htm
tke371 said:
invisibleSHIELD.. That's all I have to say.
oH, view the demo also.. its well worth it.
Click to expand...
Click to collapse
FYI, a warning this could break your Tilt!!!!
This shield rocks. However it's a risk for the Tilt. You have to apply water to the back of the protector to get the bubbles out. I applied water, shook the excess water off before applying.... and stuck it on.
I used the included squeegee to get the excess water out of the shield along with the bubles. I wiped extra water away. Next day, my screen was dead (colors were washed out and glitches). Apparently during the squeegee process water slipped between the screen surface and the edge of the bezel around the screen, and in to the phone, and got under the LCD plastic into the LCD itself.
I do use this product on my $2700 SLR camera. There's no bezel on the LCD so the squeegee'd water comes right off, and won't get in the camera.
Beware. I had to get a new Tilt because of this, and it'll be a cold day in hell I use this product on any item with a bezel where water can seep in.
Semi- related: how are you guys cleaning your phone screens?
Oh, and +1 for Martin Fields.
My phone broke, but I had insurance on it (not from phone company but through homeowner's via a personal property rider), and mycellularrepair.com was able to replace the LCD for $200. Also, never buy that phone company insurance. Personal property rider is the way to go. It was just pennies a year for ~$500 of coverage for the phone. NO DEDUCTIBLE! So I paid nothing to have my phone fixed.
Get a NEW ONE - They're Cheap
jon_k said:
FYI, a warning this could break your Tilt!!!!
This shield rocks. However it's a risk for the Tilt. You have to apply water to the back of the protector to get the bubbles out. I applied water, shook the excess water off before applying.... and stuck it on.
I used the included squeegee to get the excess water out of the shield along with the bubles. I wiped extra water away. Next day, my screen was dead (colors were washed out and glitches). Apparently during the squeegee process water slipped between the screen surface and the edge of the bezel around the screen, and in to the phone, and got under the LCD plastic into the LCD itself.
I do use this product on my $2700 SLR camera. There's no bezel on the LCD so the squeegee'd water comes right off, and won't get in the camera.
Beware. I had to get a new Tilt because of this, and it'll be a cold day in hell I use this product on any item with a bezel where water can seep in.
Click to expand...
Click to collapse
Interesting - Are you really that concerned about a product which is relatively cheap compared to the amount of time use you get out of it? Forget washing it off. Just put another one on - a CLEAN NEW one. If they last a long time (like in most cases a year or more), who cares that you have to spend around $20 to get a replacement. If they stopped making them altogether or they cost a ridiculous amount of money (for plastic, ridiculous. For peace of mind, priceless), then yeah, I would wash and rewash the screen to save money.
And the idea is NOT to squeegee the WATER bubbles out to the sides. They will evaporate on their own given some time. The idea IS to squeegee the AIR bubbles out to the sides and also to take extra great care when doing this procedure. You wash it off so that it restores some of the tackiness on the film. You can get most of the water off by blowing or using a can of compressed air, THEN put it on. You shouldn't have that much water under your film if you take care when doing it.
I am sorry about your tilt. That really sucks. If I were you, I would just put a BRAND NEW one on next time and forget about washing it off.
~Gwen
I need one of these too, recently the digitizer for the touch screen on my phone cracked. They are charging me 50$ for the screen and 40$ for labor. My question would be, would this rigid screen have prevented my digitizer from breaking? If it would then id buy it in a second.
I'm giving a +1 to the Martin Fields as well.
I just got a couple of them for my phone. They're definitely more rigid than some of the others, but I put it on a clean screen & can barely tell I have one on.
Stylus slides smoothly across it, no visible scratching at all (unlike the OEM one that marked easily), & it's also pretty smooth for finger usage too.
Had to wait a week for them to ship via expansys-usa, but worth the wait.
This may seem like a stupid question but: The screen is made out of plastic, not glass, right? How easily does it scratch? How does it do in a pocket without a case?
Thanks
Put it this way; I'm very careful what I put in my pocket with the phone, definitely no keys, coins or lighters. I took off the sony screen protector because it doesn't even cover the whole screen, and you'd need to cut off the tab on one corner if you were to use it permenantely.
I have a very basic carphone warehouse "cut to fit" protector on mine now, the protector itself isn't particularly scratch resistant (that is to say it's sh!t) but at least the screen doesn't take a beating.
One thing I do kindof like is that I've cut the protector down to such a size that it pops just under and between the bevel and the screen. It was bloody difficult to get the thing in there properly and without any dust, but worth it imo for the final result.
always use a screen protector, that way you don't need to bother having care of the screen.
once the protector is scratched, remove and put a new one.
I used the stock one 5-6 days ti'll the Martin Fields I ordered came to my house.
Also I bought a Waterfield suede jacket that fits perfectily the xperia and is really thin, but protects from scratches the x1 itself.
Thank you for the replies! I should order these along with my phone?
http://www.sfbags.com/products/cellphonecases/cellphonecases.htm
http://www.martinfields.com/US/productdec.asp?pid=4181&modeln=&model=
Hi!
I got my hands on ZAGG's invisibleSHIELD for X10, it's on the way thru delivery.
I saw their videos, and it's seem hype.
Anyone have personal experience with this product?
Also, right now, I have a rubber-not-so-tight-fit casing for the X10, but I want to get one that has tight-fit, real tight fit rubber casing to put on after the invisible shield? Recommendations?
Something in the lines that matches with iSkin, that the have for the "not so hype" iPhone...
If you go up a level to the Sony Xperia X10 menu page and have a look in the accessories subsection there is a lot of info on cases and screen protectors etc which might be helpful to you.
I bought Zagg's full body invisible shield before for my SE Satio. They were difficult to apply. Also, the screen responsivenss was better on the stock screen protector. You dont really need to replace it if yours came with one. The Zagg screen protector feels sticky to the touch. Not so good on a capacitive screen
Zagg's invisibleshield is horrible. My buddy got one for his x10, and I applied it. Every piece was not cut precise except the back cover. The front screen protector wasn't even cut straight. The left and right borders were tapered in the middle leaving about 2mm of space, on each side, between the border and the screen protector.
From my own experience with the product on my x1, the full body shield turns yellow and traps tons of dirt at the edges. It just looks cheap over time.
Backcover? People actually _like_ having slippery backs? Imo the stock coating is optimal since it's very grippable, it's rugged and it doesn't gather any fingerprints.
ddewbofh said:
Backcover? People actually _like_ having slippery backs? Imo the stock coating is optimal since it's very grippable, it's rugged and it doesn't gather any fingerprints.
Click to expand...
Click to collapse
Well, I was just stating a fact that it does come with a back shield, and it's the best cut piece of the set. While I do like the bare back feel of the x10, the option is there for people to use it or not use it.
I got myself a Martin Fields screen protector. Applied it today. So far really loving it. Will review it soon.
InvisibleSHIELD is also supposed to be real good, but a pain to apply correctly.
needmoregigs said:
Zagg's invisibleshield is horrible. My buddy got one for his x10, and I applied it. Every piece was not cut precise except the back cover. The front screen protector wasn't even cut straight. The left and right borders were tapered in the middle leaving about 2mm of space, on each side, between the border and the screen protector.
From my own experience with the product on my x1, the full body shield turns yellow and traps tons of dirt at the edges. It just looks cheap over time.
Click to expand...
Click to collapse
I had the same experience with my Zagg sheild. Tappered sides and what not. Anyway I am not a fan. What I would like to know is if there is similiar screen shields to the ones for the iphone?? They have almost the texture of a sheet of paper, never streak and seem to provide excellent responsiveness. Im not sure of the different types of protectors but if someone knows of one like this let me know!
Also the Zagg shield on the back of the X10 is actually pretty sweet......its not slippery. In fact its the exact opposite. You can set the thing down on the dash of the car while charging and it will not slide around at all. But hey, if thats worth $20 then have at it.
Not bad...
I have the invisibleSHIELD for my X10 and it's not to shab... but not too good...
As with one of the posts above, the front screen protector was not cut to fit properly; there is a gap on my screen about 1/4" on the right side, however the left side is flush. I emailed Zagg about it and they have sent me a new one and apologized that the case was damaged during shipping (although it was very clearly NOT damaged during shipping, it was just cut that way).
The rest of the case fits snug, but it does get dirty/sticky on the edges. I will be getting another case to put over it; likely the FlexiShield.
I personally like the feel of the screen protector more than the stock protector. I have both of them on right now and have no issues with the touchscreen whatsoever. The Zagg shield never fingerprints, but it would with the stock protector.
Overall, I would give the invisibleSHIELD a 7 out of 10. If I was rating the screen protector alone I would give it 8 out of 10 (points dinged for the improper fit, hopefully the replacement sits flush).
If you are like me and want a mint looking phone you might get a little frustrated by the scummy edges, however the material is strong and you will definitely not scratch anything. I recommend doing away with the full body case and just getting the screen cover in combination with another case!
Cheers!
Update: Received the replacement but the screen protector is even more tapered on the edges than my original. I've scrapped the shield and went with a plastic fitted case. Too bad, I really like the quality of the material. I'm going to try and get a refund.
Wow! Judging by the reviews, I am not glad that I went for MF instead of ZAGG.
I got protech which is essentially the same thing and I have to say its pretty good. I've used invisible sheiks in the past on a g1 and found it was easier to apply to the x10. You have to be really patient though if you leave the smallest air bubble on the edge as previously mentioned dirt and dust gets trapped underneath and starts to peel.
Sent from my X10a using XDA App
I have full body Zagg ... it sux.
The size of the front part is not right so i have about 2mm on edges which are not covered.
The top, bottom and side parts are already gone.
The back part is still there ... for now.
I have a gadget shieldz full body.
I'll try it in about 2 weeks when the zagg will be gone.
Zagg lasted about 3 months.
I have the Martin Fields one bought from Mobile Fun. It is the biggest fingerprint magnet in the history of phones. I bought the double pack thinking I'd have a spare as back up. The actual screen applies beautifully but it has lifted in the top right hand corner near the proximity sensor. I managed to reapply it without taking it off totally but its still not perfect.
I want the same shield we bought for hubby's Iphone. Its a matt anti reflective one and shows no finger marks. I spend my life cleaning smudgy prints off mine.
To clear out what others said and my experience with zagg shield,
It all comes to how accurate are you when attaching it.
But if you want some advice, just put the back part only. The stock screen protector is much better, the side parts are too hard to put on.
and take care They are very stretchable. ..
Sent from my X10i using XDA App
I agree, the Zagg screen protector makes the screen slightly sticky or something. Makes it hard to drag things across the screen like when moving cards in Solitaire etc. I'm on the lookout for a good screen protector now, wish i never removed the stock one!
I actually like the feel and look of the back protector and yes, the side and bottom protectors are a bit too finicky and strechy for clumsy people like me to put on properly!
Painfull Installation - Happy Though!
Hey!
So, I finally had time over the weekend to apply the invisibleShield to my X10, the full-body, "maximum protection" version.
Just let me tell you:
(1) Painfull process - took nearly 2 hours from start to finish, minus break / re-doing time because i wasn't completely satisfied.
(2) Not enough solution - the spray bottle they gave is enough for 1 time installation only! No room for mistakes. Found out the solution was Johnson's brand baby shampoo & distilled water (I didn't have any distilled water, instead, used a new bottle water from Nestle brand) ... worked like a charm
(3) sizing - oh man! the sizing of the invisible shield is not perfect, except for the back piece ... front has gaps, 1/2mm or less on either side.
(4) Applying ... it took me about 3 times to get it right, fitted accordingly. That's how I ran out of the solutions.
(5) Squeeze is not good on small pieces, better to use a q-tip to slide thru the solutions off.
Overrall, it's a different feeling. Getting used to it.
Only thing I would ask ZAGG to do is: PROVIDE A BOTTLE WATER size of solution!!!! & correct sizing of the pieces.
- Just 1 or 2 mini bubbles seen just by me, otherwise, it's a charm!
Still, I got my hands on a iPhone 4 32GB as well, kit for that is coming soon. Should be easier ...
I wish they had Otter Box style casing for X10.
tell us about fingerprint and screen clarity ...
naveen_reloaded said:
tell us about fingerprint and screen clarity ...
Click to expand...
Click to collapse
Clarity is ok.
Fingerprints ... way better than the original but still not good enough ...
Just don't drop sun protection lotion on your phone
You will need another invisible shield ...
Fingerprint is not there, or atleast, very much of it is reduced. I am a clean freak, so, I clean it everyday before putting it to charge for the night.
Senstivity was something to get used to, little bit off in the beginning, but after the curing process of the invisibleshield, it works like a charm.
Anyways, I contacted ZAGG, they are sending me another full kit for the X10, since I complained about the sizing & not enough solutions ...
I have to wait for approx 1.5 weeks to receive, remove the old/existing one, and do it correct the 2nd time around.
Of course, i need to send back the one I have right now when I receive the other one...
I'll post a message on how my 2nd attempt went, (with extra bottle of solution, yeah! that's right! I demanded to the agent on the email for 2nd bottle of solution)...either way, baby shampoo & distilled water is good enough too.
Screen Clarity - 100% or 99.99% , unless you angle the phone differently in the light or reflection , you dont see it.
I had the full body but took it off.
I bought the white X10 in dubai, like everyone else said fitted poorly and bleeds the colours from your case, I had to take it off as everyone was saying how battered the phone looked after a month.
It is pretty bullet-proof though, sure it must look better on the black phone!
Only had my YD206 for 2 days, and the rear screen got some bad looking scratches. Was in my pocket with only a very small (thumb size) aerosol dispenser which apart from a smooth rounded edge body has a plastic cap with so-so sharp top edges. Anyway, it left a couple of deep looking scratches that won't rub away.
I wish I had taken some pics before I started, so your just have to believe me:
I very carefully (and with my heart in my mouth) applied a tiny amount of toothpaste with my finger to the deepest scratch near the top of the screen. I used circular motions with my finger for about 15 seconds and then another 15 seconds with a kitchen towel. I then cleaned it off with a little water and a clean kitchen towel. Once dry I could barely see the original marks so I repeated it on a longer scratch/scuff on the middle of the screen. The marks which were very obvious to any casual user are now almost invisible.
However, I've observed that if a put a water drop on an area of the screen that I didn't use the toothpaste on, the droplet beads and will roll off if you tilt the device. If I put a droplet on a treated area it disperses and leaves a dark wet patch. This will disappear if the you dry it completely.
This leaves me to belief that the so called Gorilla Glass 3 (advertised as on the rear screen too) is not so, but is a cheap liquid glass coating which I have just rubbed off.
I have since ordered some liquid glass protector from Amazon (Crystalusion Liquid Glass - product no: B0094EETOG), maybe that will stay on and offer some protection. I don't really want to put a film protector on the back, it would spoil the look and feel. I will post the results.
I was just wondering whether I should rub the whole of the rear display with toothpaste to prime it for the liquid glass. Any thoughts?
Interesting observation. Have any one applied a tempered glass to the back e-ink screen?
I agree, on the Chinese phones, both screens are made from cheap glass, easily scratches and cracks. Curved gorilla glass must cost a lot!
It makes me wonder about the battery and other internal electronics too.
Great idea about the toothpaste.
I ordered a film for the EPD display.
Parmo100 said:
I agree, on the Chinese phones, both screens are made from cheap glass, easily scratches and cracks. Curved gorilla glass must cost a lot!
It makes me wonder about the battery and other internal electronics too.
Great idea about the toothpaste.
I ordered a film for the EPD display.
Click to expand...
Click to collapse
Why are you saying so? YD206 should just differ in LTE bands, the phone is the same.
By the way which film for EPD display you ordered? I want to try the one described here: http://forum.xda-developers.com/yotaphone-one/accessories/screen-protector-t3097978/page1
But I can't find it anymore.
I am saying phones from Chinese retailers all seem to have components that differ in quality from the old yotaphones assembled in Singapore. I have only a yd206 but I imagine Yd201 is the same. Real Gorilla glass does not scratch and break so easily.
I very carefully (and with my heart in my mouth) applied a tiny amount of toothpaste with my finger to the deepest scratch near the top of the screen. I used circular motions with my finger for about 15 seconds and then another 15 seconds with a kitchen towel. I then cleaned it off with a little water and a clean kitchen towel. Once dry I could barely see the original marks so I repeated it on a longer scratch/scuff on the middle of the screen. The marks which were very obvious to any casual user are now almost invisible.
Click to expand...
Click to collapse
You can do the same with scrached watchs, but for better result some great product exists , like polywatch (and it's cheat, about 5$ for a tube)
satsuki_yatoshi said:
You can do the same with scrached watchs, but for better result some great product exists , like polywatch (and it's cheat, about 5$ for a tube)
Click to expand...
Click to collapse
Thanks for heads up on polywatch, that looks very interesting so I might get some. After using the toothpaste the other day, I bought another brand (Arm & Hammer) and was conscious that it was more gritty than the stuff I used on the phone (Colgate). I wouldn't have liked to use that on the rear screen.
To add to the Gorilla glass comments, if you go to the corning_dot_com web site they list the manufacturers that are licensed/authorized to use it. Yotaphone are not listed unless or course the phones are built by one of the listed suppliers. Of course that would suggest that the Russian built phones don't use Gorilla glass either - Any comments from Yotaphone on this (if your listening of course)?
I managed to drop my YD206 in my garage. Tried to catch it mid-air but failed miserably so things got worse by spinning like crazy before hitting on the rough concrete. the phone flipped a few times on the concrete for 40-50cm before coming to rest on the front screen.
Bad news are: Back glass is shattered at the lower right "corner" where the first impact seemed to be.
Good news are: Front screen and frame don't have a single, not even tiny scratch! Even though it flipped like crazy and i saw dusty and dirty hit spots where the front screen hit the edgy concrete. EPD still works 100% and glass fragments seem to hold in place (except for a small edge missing in the corner.) I'm impressed and I bet my front screen would be gone if it wasn't some higher quality glass.
I agree, it's only the curved glass that is a cheap fake version. Front glass scratches easily but seems tough.
Finally got the Crystalusion and applied it. I didn't bother to prime the rest of the phone like I said I might and I didn't need too.
Now the phone surface beads water drops and the areas I rubbed down don't absorb water like they did before.
Whether or not the surface will be protected by the coating I don't know. It doesn't feel any different, so only time will tell if it resists scratching and abrasion.
If I remember I will revisit this thread say 4 or 6 months in the future and report back.
I applied a film to the EPD back of mine, I used the supplied wet and dry wipes but there were still a few bubbles. It was extremely difficult to get rid of the bubbles, some remained.
The EPD touch screen works fine still, the phone looks almost as good as before. The film did not stick as well on curved sides as on front, but ok.
But, as someone has already written, the clarity of the screen has improved greatly, there is no more "matte" appearance (due to removal of the cheap coating). It looks like a transparent plain glass screen now. In short the EPD looks much clearer. I love EPD screen now and I am using it much more, well, ALWAYS, in fact. 11 hours battery.
The Yotaphone 2 phones bought from China EPD have NO gorilla glass is my conclusion, I agree with apludgate, just this cheap coating. The huge drop in price of the yotaphone in 2015/16 begins to become clearer, but I am very pleased to have had the chance to buy a Yotaphone. It would be interesting to know the REAL technical differences of the Chinese and Russian phone specs.
Now just awaiting next drop of phone of course
Parmo100 said:
I applied a film to the EPD back of mine, I used the supplied wet and dry wipes but there were still a few bubbles. It was extremely difficult to get rid of the bubbles, some remained.
The EPD touch screen works fine still, the phone looks almost as good as before. The film did not stick as well on curved sides as on front, but ok.
But, as someone has already written, the clarity of the screen has improved greatly, there is no more "matte" appearance (due to removal of the cheap coating). It looks like a transparent plain glass screen now. In short the EPD looks much clearer. I love EPD screen now and I am using it much more, well, ALWAYS, in fact. 11 hours battery.
The Yotaphone 2 phones bought from China EPD have NO gorilla glass is my conclusion, I agree with apludgate, just this cheap coating. The huge drop in price of the yotaphone in 2015/16 begins to become clearer, but I am very pleased to have had the chance to buy a Yotaphone. It would be interesting to know the REAL technical differences of the Chinese and Russian phone specs.
Now just awaiting next drop of phone of course
Click to expand...
Click to collapse
Where have you found back screen film? And how manage to use it even if the film doesn't stick on curved sides? It sould peel off eventually...
I also would like to see if the clarity improves, and what are the cons of not having the standard coating anymore.
I found glass and film on aliexpress (of course), only 3-4 usd for a set of 2 pieces.
It sticks, but not so well on curved sides as you can see from the photo. Yes it will peel off eventually.
But the vast improvement in clarity was surprising.
The fake "gorilla" glass, no doubt, offers very little protection, it was just added to make it look like a genuine yotaphone.
I would advise all owners of yotaphones bought in China to buy silicon Bumper and screen protection.
Parmo100 said:
I found glass and film on aliexpress (of course), only 3-4 usd for a set of 2 pieces.
It sticks, but not so well on curved sides as you can see from the photo. Yes it will peel off eventually.
But the vast improvement in clarity was surprising.
The fake "gorilla" glass, no doubt, offers very little protection, it was just added to make it look like a genuine yotaphone.
I would advise all owners of yotaphones bought in China to buy silicon Bumper and screen protection.
Click to expand...
Click to collapse
Yeah I have a bumper and a film for the front screen, but I think I'll not buy yours for the problem in photo. As previously said in this thread, I was searching something like the film described HERE but couldn't find any...
Sounds impressive. It looks very clear in the photo.
Does your screen appear matte, like mine did before?
Parmo100 said:
Sounds impressive. It looks very clear in the photo.
Does your screen appear matte, like mine did before?
Click to expand...
Click to collapse
I found it! http://www.ebay.co.uk/itm/Yota-YotaPhone-2-INVISIBLE-Screen-Protector-Shield-Full-Clear-Skin-Front-Back-/171744750586?clk_rvr_id=1141685710269&rmvSB=true
And yes, my back screen is matte and VERY slippery, I hope that with the film above it will be no more slippery. For now I'm using a bumper, otherwise the smartphone is almost unusable
Full body protection
This one one amazon, i purchased but it still on the way
smile.amazon.com/gp/product/B018835YB0/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Full body with supporting website iqshield.com/fbscins.html
I'll try and feed back.
Deleted
TheArt. said:
I found it! http://www.ebay.co.uk/itm/Yota-YotaPhone-2-INVISIBLE-Screen-Protector-Shield-Full-Clear-Skin-Front-Back-/171744750586?clk_rvr_id=1141685710269&rmvSB=true
And yes, my back screen is matte and VERY slippery, I hope that with the film above it will be no more slippery. For now I'm using a bumper, otherwise the smartphone is almost unusable
Click to expand...
Click to collapse
The same one as that one on Aliexpress is 2.20 USD = 1.50 British pounds including free delivery, 5 times cheaper, where the guy in Derby probably buys them from.
Parmo100 said:
The same one as that one on Aliexpress is 2.20 USD = 1.50 British pounds including free delivery, 5 times cheaper, where the guy in Derby probably buys them from.
Click to expand...
Click to collapse
I checked and couldn't tell if those are the same the guy of xda reviewed in the post I linked.
Hello all!
First time posting in a while, so forgive me if I'm a bit rusty. I just got my Samsung Galaxy Note 10+ yesterday, and my amFilm Ultra Glass Screen Protector today, so I thought I'd write up a little review. Sorry for no pics, but I was busy installing and trying to keep things dust-free
I've used Whitestone in the past but was disappointed with both my Note 8 and 9 installs, primarily because of the LOCA spiderwebbing on the edges. I figured I'd give another brand a shot, so I went searching here and found the amFilm Ultra Glass Screen Protector. A quick trip over to Amazon, and $40 later (for a full kit including *2* protectors) and here we are!
PACKAGING: The box is nice - wider and flatter than the WS product. It's clean and simple, but professional looking. Plus their website and install video are well done also. Inside the outer box are three smaller boxes. The largest contains the plastic frame, screen protectors, and wipes (I think). The medium size box contains the UV light and the MicroUSB cable. It appears to be identical to the WS product, but I don't know this for a fact, so take that for what it's worth. The smallest box contains the LOCA (2 tubes), extra absorption pads, plastic pin, tabs to place over the speaker, a bubble level, and a weight. Everything you need comes in this kit, including plenty of wet and dry wipes, microfiber cloths, and dust removal stickers. On the packaging is a QR code to go to the install video.
PRODUCT: Everything seems to be on the same quality scale as the WS product, with a few minor changes - 1) there is no LOCA applicator "bridge", you have to aim and dribble the solution by hand, 2) the pin is different - there's no more tilting the entire phone to move the liquid into position - the pin is angled and sets the glass down at an angle, and 3) the "fingerprint" weight (more on this later). Otherwise, if you've done the WS before, this isn't significantly different.
INSTALLATION: **REMINDER** REMOVE the factory plastic screen protector and clean your screen THOROUGHLY before proceeding! I ALMOST forgot, which would have been a disaster! I watched the video twice and didn't see any mention of this, so amFilm, here's a tip for you. Anyway, installation is straightforward -put the little feet on the bottom of the phone to bring it flush with the pins inside, make sure the screen is 100% clean, install the sticker over the speaker, apply the liquid (making sure to absorb any "splatter" before proceeding!), peel the protective film off the glass, place it, and pull the pin. Once the liquid starts to spread, put the weight where the fingerprint sensor is and let it settle and "ooze" for 3-ish minutes. (NOTE - it's hard to locate the fingerprint scanner, so you might want to mark the frame in advance with a Sharpie (another tip for amFilm - marking that plastic with some kind of raised bumps or hash marks might be a good idea, or maybe a film for on top of the glass that marks where to place it - just a thought). After that, it's bake-time under the UV light, then you're done.
RESULTS: I'm very impressed so far. The glass appears to be nice and clear, and I can't even see the little "spots" in the corners others mentioned. I lucked out this time and no dust specs at all. No bubbles, etc. the fingerprint scanner appears to be working fine, although I haven't re-registered anything. It DOES require a little extra "umph" to scan, but that's not a big deal. Part of that could be me getting used to an in-screen scanner. There was minimal over-oozing, and the pre-installed pads absorbed everything fine. Barely needed a wipedown afterward.
FITMENT: There appears to be no flaws in placement using the guide, or in the fitment of the glass. It sits flat, and lines up exactly where it should. The cutout for the front-facing camera is exactly where it should be, and it's not overly-exaggerated in size. The edges leave plenty of room for putting the phone in a case (I've tried 4 so far, all fit without touching the glass edge, so there's no worry about case push on the glue). The bottom edge is just a tad bit short, maybe a 1/16", but that could be allowing for larger cases (I don't use the big bulky ones, so IDK).
OVERALL ASSESSMENT: 4.5/5 Stars - Great product, especially for the price. I'll keep you posted on long-term wear & quality, but for now, I'd say it's a great deal versus the competition.
Great review. I just installed mine yesterday and I've had exactly the same great experience with the product. It really does work well with the fp scanner. I had a terrible time with the S10 plus fp scanner and the Whitestone. Great price as well. I'll buy again for sure.
Mine note come with preinstalled glass protector
fazi78 said:
Mine note come with preinstalled glass protector
Click to expand...
Click to collapse
So did everyone's. There's three or four threads about it already. And that's why the OP said to make sure to removed the factory installed screen protector.
Will this work with the samsung clearview cover ?
and can this protector be easily removed?
thanks
I just picked up a set of the amfilm install went flawless a lot easier than the whitestone I had on my S8 fingerprint worked right of the bat with what I had already registered I think it even sensed it better than the stock protector that came with the phone, well spent $40 bucks on amazon
Forgot to mention it fits perfect with my otterbox case
neils31 said:
Will this work with the samsung clearview cover ?
and can this protector be easily removed?
thanks
Click to expand...
Click to collapse
Not sure about the Clearview cover, I haven't ordered it yet.
As for removal, it uses LOCA glue to adhere the screen protector to the phone, so it's not the easiest thing to remove, but will come off with a little effort. You will want to have lots of alcohol wipes handy to clean the screen afterwards. Maybe a few Band-Aids, too
AMfilm doesn't seem to gather dust at the edges like it did with the Whitestone install on my Galaxy Note 9. That's a blessing! I was always cleaning clingy dust away on a daily basis. The edges on this install are clean!
RaymondPJR said:
AMfilm doesn't seem to gather dust at the edges like it did with the Whitestone install on my Galaxy Note 9. That's a blessing! I was always cleaning clingy dust away on a daily basis. The edges on this install are clean!
Click to expand...
Click to collapse
Hey Ray, do you know why? is it because of different density loca glue? I really want to switch to glass protector but hesitant because of dust built up around the edges.
Sent from my SM-N975W using Tapatalk
neils31 said:
Will this work with the samsung clearview cover ?
and can this protector be easily removed?
thanks
Click to expand...
Click to collapse
yep. works with every case i got so far. Might have issue with the ones with a front plastic piece though like on some heavy duty cases.
not sure about removal, but ive not had issue with any loca based one so far in the years ive used them.
lexi250 said:
Hey Ray, do you know why? is it because of different density loca glue? I really want to switch to glass protector but hesitant because of dust built up around the edges.
Click to expand...
Click to collapse
It must be a difference in the glue, I don't know what else accounts for it. I had really fuzzy edges all the time with WS.
How hard is it if you want to remove the screen protector pls?
I'll add my review...
I applied this to my S20+ yesterday. The steps were clear on paper, but the video was more helpful still.
Everything went fine with the exception that when I opened the adhesive tube it sprayed out a bit even before the top cap was opened, and I suspect this is due to me living at a high altitude. As a result my glue didn't fully spread to the whole screen, but close, and there were many small bubbles in the center of the screen. Next time I might try opening and closing the top first to equilibrate pressure.
That said, this is a promising product. It has a smooth and even finish, remains low profile so my case fits which still wraps the lateral edges, and the fingerprint part works a bit better than with the cheap plastic screen protector that samsung supplied (which also scratched easily).
I've never used screen protectors on prior phones, but this product is nice enough that I'll use it on future phones as well.
Additionally, the customer service was outstanding and they immediately sent me a replacement protector and more adhesive to try again.
Thumbs up so far, I'm confident my next application will be successful.
For those who installed this last year, how has it held up?
Jammol said:
For those who installed this last year, how has it held up?
Click to expand...
Click to collapse
Not good I'm guessing, based on the lack of replies. Wish someone woulda replied, oh well...
Sent from my SM-N950U using Tapatalk
Sorry, haven't been on XDA much. I've had my amfilm since Dec, 2019 and it's still like new. Oleophobic coating has not wear off.