Hi,
After I unlock my omnia7 with fastgsm method, zune software on pc dont recognize my phone and dont connect :x what I can do ?
Thanks
Don't know what the FastGSM method is or does but if you had to reconfigure your USB-Port using the Diagnosis Tool you will have to restore those settings to their original values for Zune to recognize your phone.
Edit: Just googled it and it most likely is that you forgot to change the setting back to Zune Sync in the Diagnosis menu.
Related
hi to everyone,
i have a locked-SIM t-mobile phone edition which i tried to unlock using a serial cable & the manipulator.
the problem is that the manipulator can't find the device after scaning COM port.
i have checked that the port is not blocked by any program including the synchronization programs but there was no luck.
anybody knows what is the problem in my situation?
Be sure to press SIMULTANEOUSLY both power button AND reset with your stylus. This will bring your T-Mobile to WALLABY mode. After the screen reads GSM OK, connect the cable to your phone and PC and run manipulator.
This should work. I have the same T-Mobile and it worked with mine.
There have been posts with reports where people have had problems connecting to the pda because they have been using a laptop...
I unlocked mine on a SONY VAIO laptop successfully.
hi again,
i have tried the exact steps for unlocking but still the device wans't detected by the manipulator.
the synchronization program also can't detect the device if it is pluged using the serial cable.
could anyone please help me? i couldn't use the phone since 1 month.
Try 75656354
Wasn't there in any thread the hint to uninstall ActiveSync to get the manipulator to work?!?!
Search here in the forum. It wasn't posted as long time ago.
Or just try it when you uninstall.
I ment that there was a problem because active sync wants to connect to the XDA/MDA when connecting it to the serial....
Regards
LumpiStefan
Remember you must have the XDA in bootloader mode.
Any solutions? my computer will recognize at first but then it says not connected and wont let me acess the files on my wing. Im using Windows Vista btw.
Can somebody help me with this problem?
I am using vista also.. try soft reseting it.
I tried soft resetting it and hard resetting it and it still doesn't work. Now I'm contemplating ever getting Touch It 2.3
Try going in settings->connections->usb to pc and either check it if its not checked or uncheck it if it is checked
Mine did this too last week. Reflash your phone with the official Tmobile RUU posted in the forum.
My steps were:
-Go into bootloader mannually (camera button plus voice command button and finally with those two press, click in the hole (between memory and volume key) with your styles)
-After it seems that pc loaded up some kind of driver, double click on the official Tmobile RUU and flash your phone to stock form.
this should work and goodluck...
I've connected my Wing on my friend's computer and it's recognized by his ActiveSync but its Windows XP he's using. Is there any way i can reinstall or change some settings on my computer so that it can recognize my Wing again? I really prefer the windows xp activesync over the windows vista version but theres no way of getting the old activesync on vista.
Finally!! I fixed the problem! I had to install version 6.1 from microsoft's website, and everything is good now. thanks for the help everybody.
do you have the link to that update im having the same problem
nm i got it, thanks for the solution though
i have recently purchased this phone and it is currently locked to t-mobile. I am a canadian resident using rogers network. when i turn the phone on it says NETWORK IS LOCKED PLEASE INPUT UNLOCK CODE. I know this number is generated by the IMEI if i remember correctly..... i just dont know how to go about accomplishing this. also ...my computer isnt recognizing it VIA USB............ i am just so at a loss for what to do ...please someone help
oh yeah the IPL is 1.08 and the SPL is 1.08 when i get to the bootloader screen that is all that comes up
As your phone is SIM locked,only t-mobile sim will work on it,but if you want to use any other network sim,you got get your phone SIM unlocked,to do so follow the instructions in the guide and perform the method correctly to get it sim unlocked. Check out this link for the sticky and guide:-
http://forum.xda-developers.com/showthread.php?t=249474
Good Luck
zabardast_1 said:
As your phone is SIM locked,only t-mobile sim will work on it,but if you want to use any other network sim,you got get your phone SIM unlocked,to do so follow the instructions in the guide and perform the method correctly to get it sim unlocked. Check out this link for the sticky and guide:-
http://forum.xda-developers.com/showthread.php?t=249474
Good Luck
Click to expand...
Click to collapse
as much as i would love to do the unlocking myself i cant even get the phone to connect to my computer VIA the USB cable everytime i try i get the " USB device has malfunctioned " so no go there. i cant even activesync it .
zabardast_1 said:
As your phone is SIM locked,only t-mobile sim will work on it,but if you want to use any other network sim,you got get your phone SIM unlocked,to do so follow the instructions in the guide and perform the method correctly to get it sim unlocked. Check out this link for the sticky and guide:-
http://forum.xda-developers.com/showthread.php?t=249474
Good Luck
Click to expand...
Click to collapse
as much as i would love to do the unlocking myself i cant even get the phone to connect to my computer VIA the USB cable everytime i try i get the " USB device has malfunctioned " so no go there. i cant even activesync it .
hoffmanbiker said:
as much as i would love to do the unlocking myself i cant even get the phone to connect to my computer VIA the USB cable everytime i try i get the " USB device has malfunctioned " so no go there. i cant even activesync it .
Click to expand...
Click to collapse
ok,
If there's a connectivity problem,there are a couple of things to verify it.First which windows are you using,if its winvista,you'll have problems,activesync doesn't work with vista,secondly its not recommended to work on vista.So get on with winXP and also get Activesync version 4.5 the latest.In activesync check the option 'allow usb connections' and in your phone goto settings---> connections and 'uncheck' 'establish all network connections' or something and then try to establish activesync connectivity.If still fails,than,
2. verify usb connectivity with pc, to do so get your phone into bootloaders mode (multicolor screen) by pressing and keep holding down the camera button and simultaneously push the Power On button,your phone will wake up and go into tricolor screen (Bootloaders mode)with ipl/spl showing in red colors.When in bootloaders,connect your phone with pc via usb cable,if a small usb appears at the bottom of the tricolor screen,then its has connectivity,but if doesn't appears,then you have a connectivity problem,so:-
a. either your usb cable is faulty,get a new usb cable and try again.
b. or usb input slot of your pc is not operating,try with a different usb input slot of your pc or even try out on an another pc.
c. Mini usb port of your phone is broken,get it repaired or replaced.
check out all these options and rectify the problem.
Cheers !
ok just to verify i am using wins XP and i have removed entirely activesync, reinstalled it checked to see if there is connectivity VIa boot loader and still it comes back that there is a usb malfunction is there ANY drivers i might need?
dude dont know about your unlocking problem, would be nice to hear that youv solved it... wouldnt it be nice if this world had no problems? but then saying that this forum would not exist... and troubleshooters wouldnt have jobs! lol
a) Unlocking NO...
b) active sync... Bluetooth... just rememberd you cant get in can you? to connect ia bluetooth?
email me privately on [email protected] and i may be able to help you if not ill find a way... a bit lost in the head (Attention Dissorder) cant focus...
sori
Sham
hello,I'm from china.and I get wp7 phone HTC 7 Surround.It's a phone for test.and I try to Switch USBMode to zune mode,it does't work..It only can work on Diag mode..so,someone can help me? The DIag mode Driver can’t find.It seems to unlock for developer？
look the picture...HELP...
understand me? sorry for my poor english
Now it does't connect to pc from zune
MY MSN:[email protected]
how did u enter USBMode ?
There is a program in phone, USBModeWitch, you can find it from my picture
Is this some sort of test device? As i noticed its also security unlocked
I have 2 devices，if you need.contact me. MSN:[email protected]
YES,it is unlock....
how did u get it to be security unlocked ?
He has a pre-release phone, it came with a custom firmware that has those tools pre-installed.
YuLong, have you tried rebooting the phone (remove the battery, etc)?
If that doesn't work, have you tried connecting it to a different computer with just the Zune software? It might work.
he shuld prob contact some Devs in this forum and get his ROM dumped or backed up somehow, it may be usefull for Jailbreaking or something....
Please post your device specific questions in the proper forums!
~~Tito~~
yulong256 said:
There is a program in phone, USBModeWitch, you can find it from my picture
Click to expand...
Click to collapse
that's a test rom, not a shipping ROM, so none of us will see that.
I need a htc surround rom desperately as i made the great mistake of purchasing a likely stolen store display model. its main account is set to [email protected] and keeps popping up with fake texts and refilling the contacts with fake contacts. my battery dies fast. Im sure im not the first to ask for a rom, but lord knows i need one.
need DIag mode Driver.Thanks
hello everyone
I do not know whether the right place, there is a problem, I have a LG E900 Optimus 7 recognizes the Zune phone, when I try to open Developer Phone Registration (Status: Error communicating vith the App Hub. Please set the correct date and time on the phone, check the internet connection and try again later (ErrorCode:0x64))
Application Deployment (Status: Error - Failed to connect to device as it is developer locked. For details od developer unlock visit http://go.microsoft.com/fwlink/?LinkId=195284),
ChevronVP7( Sorru, I`m having trouble communicating with the phone. - Please make sure it`s connected using USB, - Please start the Zune application).
not know where the problem is tried I have to unlock everything, do we have to make a factory reset on the phone or make me what to do
Could it be that your device it's already developer unlocked via the MFG method? That would explain why developer registration and Chevron WP are not working.