[Q] Help!! - Wildfire General

Hye guys!! i looking for a help & advice.. still new to HTC Wildfire & also newbie in this forum..
i just buy this HTC Wildfire A3333 last week, and have a problem in connecting wi-fi. Always say 'unable to scan for networks', and will automatically turn off..
current ROM (Checking Software Information):
Firmware: WildPuzzleROM_2.1 Eclair v1.0.1
Baseband: 13.45.55.24H_3.35.15.31
Kernel: 2.6.29-6fb59e13
Build No: 1.37.405.1 CL262524 release-keys
Software No: 1.37.405.1
Browser: Webkit 3.1
BUZZ PVT SHIP S-ON
HBOOT-0.80.0003
MICROP-0622
RADIO-3.35.15.31
is it because my set is outdated? someone pls help me, i really don't know what to do, willing to learn more but looks everybody have been further front, i'm new..

It would be worth upgrading to cm7 and suggested radio
Everything works fine with cm7 here
Pretty easy since your phone is all ready rooted ,
http://forum.xda-developers.com/showthread.php?t=957140
All instructions are here somewhere ,id just be repeating them
It may seem hard , but some nice people have done the hard bit , some reading to get a handle on what your doing before attempt is all ways good
. but we got the easy job

Thanks morbosity..
need to try it out first. i've download both file, and now installing.. see the output..

i've installed it, all ok.. except my Wi-Fi..
when i try to turn-on wi-fi.. suddenly cyanogen (mod) 7 animation is out, hang just like that.. on & off, now, i cannot do anything, do i've to re-start my phone.. pls guide me thru this phase..

IF i understand you correctly , Your in a reboot loop? ,not sure why wifi would cause that
At this point i would not panic , i did the reboot loop from not wiping my cashe
a wipe and reinstall fixed that
1st i`d reflash just the radio (from my understanding)
If that does not work
then clean out cashes , and go back to a standard rom if still having trouble.

Related

2nd hard reset in 12 hours!!

ok guys, ive been hanging around this forum for some time (even though i havent participated <<< bad boy =P)
the thing is my phone kinda hangs, so i have to soft reset it, but wen it loads again, it stays on the cingular splash screen and just hangs, even though the LED's on top flash, but i cant do anything, i tried soft resetting again, but same thing, i tried removing battery, also no use...so the only option i had to hard reset it..
and after the torture of restoring all the applications and contacs and info, everything was fine till it froze again, so after the soft reset, same problem occured as above... >.<
my device is an unlocked cingular 8125, no overclock no nothing...only added a 1gb mini sd...
any suggestions??
What software do you have installed? It maybe a software issue ? After a hard reset try using it a day w/o loading your software to see if the problem occurs again. Then load your software one by one until the problem comes back. That's probably what I would do.
well its no specific software, it almost happened 2day too.
the first time i did the hard reset, last install i did was install PHONEPROFILE, then the 2nd hard reset, last app i installed was morphgear. and a couple of hours ago, i resarted, it took time to load back but it finally loaded.
could this be a rom problem?
May be your minisd - reports of this have been due to the card. try it a while without the card and if it made a difference format the card on the device with storage tools (google it). Which rom are you using? an upgrade in rom may solve your problems and give you a faster device.
this is wat i get wen i click on device info:
Rom version: 1.8.11.1 WWE
rom date : 11/24/05
radio version: 01.09.11
protocol version: 4.0.13.20
extrom version: 1.8.11.103
does it look bad? =S
(the date give me the idea that the rom needs updating maybe??)
as i said, this device had no "modding", no rom upgrades, no nothing..
i bought the phone, popped in the mini sd, unlocked the device using lokiwiz 0.2b
nothing else
Would go for an aku2 rom, the official leaked cingular one ftp://xda:[email protected]_225111_22511102_022511_CWS_WWE_Ship.exe
Would suggest still try the phone without minisd in and if you do decide to upgrade rom back everything up.
as for software wise morphgear works fine on my device so i doubt its that i noticed that when i installed phonealarm on my fone it lagged to **** everything. gl on getting it fixed
ok, i searched around the forum for the definition of a rom and wat it does..
i KNOW that a rom is kinda like the basic files to run the device, but wat other jobs will it do? and wat changes will i c if i upgrade to AKU2 , and is there a ROM that has built-in arabic support? (i.e. arabic is supported w/o any 3rd party software)

suddenly occuring start up problem

hey guys, just wanted to ask if somebody has experienced something similar..
i had jacxhero running on my 32a without problems. tonight i had the phone on the charger, and in the morning it turns off everytime after the first splash screen. i can access the bootloader mode etc normally, just loaded cyans rom and it works. but...why this sudden inusability? i havent added any program or changed settings for the last 2 days or something...
I had the same problem but with a different ROM. It was the TIM ROM which can be found in the Sapphire Android Developement section here at Xda-Dev. I'm not quite sure if it's a nandroid backup or if it's an Update.zip, but as I had it installed it seemed to be the exact same ROM my device has been shipped with and it read the same numbers in the About-System dialog thingie and so on, it was like if it was the shipping ROM.
Always after about a day of usage or so it suddenly froze though, then the device reset itself and then endlessly looped at the bootscreen. Very annoying. It didnt happen with any other ROM since then...
Mineee..
That's weird..
But, you had any data connection?.. maybe it tried to update something!
Mine started rebooting after entering on suspend mode(not on the splash screen)! The program settings from the overclock just was pulled after I run out of battery (with the "forced" reboot) and started making conflict with the specs of the myhero rom.
Whats the developmental aspect of this thread??
None.........so please post in General.
Warning given.
seems like i got more problems since this "crash"
after reflashing to cyan after this startup error and then reflashing jacheroski 1.4, im able to load hero roms like jacheroski 1.4 on my magic and they work fine, but im not able anymore to load any roms without hero kernel it seems..
i tried with several roms like different versions (working before versions!!) of cyanmod, hofo,..they all loop at the last splash screen or stay black when it should come to the actual os(one step after the last splash).
am i "doomed" to stick to hero roms forever?^^
im using eng spl .2005...should i try to reflash something? or have you guys got any other ideas?

Huge problem

ok so my phone crashed(again....) and i had to hardreset it ...now thats done..i wanted to try flashing stuff/getting a rom so i tried to download dinik rom and when i tried to connect my phone to usb/pc.it wouldnt connect! and it says phone not found...while it IS in the usb and i clicked on activysync on the phone...nothing different from a hour ago when i didnt hardreset it yet WTF is going on? i tried softresetting the phone even hardresetted it twice now..rebooted my pc ...nothing
after a while it gives an error from async saying no profiles are created..wth is this for crap?!
and also, can any1 just link me to a rom/radio whatever you think is good for a noob...its 6:45 am in the morning and im just not in the fcking mood anymore..hd2 has crashed around 10-20times in the past week since i got it and im soo close to setting it on FIRE
software info from phone in settings :
version OS :
5.2.21869 (21869.5.0.82)
manila version :
2.5.19211619.0
ROM :
1.66.404.1 (76641) NLD
rom date :
01/04/10
radio version:
2.06.51.07
protocol version :
15.30.50.07U
update : i managed to get the async to work for now...but now i have the following problem : i get update error or connection error when i try to put a new rom on(diniks rom) WHAT is wrong?? after around 3mins of the rom update being on 0% it says update error etc and you know the deal..asks to click skip or next etc...no error on my phone just have to soft reset with battery but still cant update
looks like wm hates me or something...
is your phone a locked or unlocked version?
lunaticz0r said:
after around 3mins of the rom update being on 0% it says update error etc and you know the deal..asks to click skip or next etc...no error on my phone just have to soft reset with battery but still cant update
looks like wm hates me or something...
Click to expand...
Click to collapse
did you HSPL yet? if not, thats why.
''we hacked it '' yes and its unlocked i can put in whatever sim i like etc
yay i managed to get the hpsl2 on there and flash a radio, now it says radio version :
2.10.50.19_2
is this the best? now i only need a rom or something ...any1 have a good one? i want stability and speed eye candy doesnt rly matter(for that ill use cabs and cht )
i tried to instal diniks version but it says that image version is beign downgraden
from 1.6 to 1.0 :/ is this bad?
i sent my phone back to htc...****ing phone crashed and restarted every time i got to the ''htc green screen'' logo...and even when i tried to do a hard reset with vol up and down+power button it restarted
****ed up
HD2 crashes
A couple of quick notes...
First you must remember your HD2 is a computer, programs that you install, from unknown sources could possible corrupt the operating system. I have found that when downloading apps, I come here. XDA has been really helpful in solving many of my hardware issues. Following download process is a must. If you get an app from somewhere else, come here first to see if their are any issues. I have had to hard reset on a few occasions, but that was because I was not paying attention. Its a hard lesson to learn, especially when you have installed your apps on your device and not your storage card (just remember to take your card out before doing hard reset and backup your contacts and apps). You can backup all your contacts to microsoftmypone. Then activate your account on your phone. I know its frustrating. What programs have you installed recently?
dont know..as i said i sent it back so ill see if it comes back or anything

[HELP] X8 minicm6 1.0.0 relesead go haywire

Hi,
I hav just flashed my x8 with minicm6 1.0.0 for x8.
everything works fines and its an awesome ROM.
however, i m not sure wat i have done (to the busybox version update or network connection thingy), after one reboot due to unstable WIFI connection, the phone just could not boot into the system.
it shows the unlock phone main screen with no network service. when i unlock the phone, it appears some error messages like "The process android.process.acore has stopped unexpectedly. please try again", "The process com.android.phone has stopped unexpectedly", after force close a few times or leave it alone, it will restart with appearing only the cyanogen logo and repeat the same problem.
i tried to remove the battery and restart to attempt to boot into xrecovery but failed... it will proceed with loading the minicm6 rom and repeat the same error.
HELP.. i dono wat else can i do now..
If you search this forum you can find answer quickly. Look here:
http://forum.xda-developers.com/showthread.php?p=12442257#post12442257
Never update Busybox!!!
thanks bro.. now only i realized that it was an fatal error i have done.. @@
now i m downloading the firmware.. will try to flash it back.. then redo the whole custom ROM process.. is this the only way?
thanks for the link yea.. it helps a lot..
Yes it is only way I think
once u got it all running the way u want it go to xrecovery, wipe all the caches, then create a backup and store the folder somewhere safe preferably outside ur phone. do not rename the folder it may mess up the checksum
alrite.. thanks..
i have done everything.. reflash the whole phone with the firmware... bla bla bla..
now restoring the data i had.. going to do a total backup after everthing comes back~
thanks a lot.. i m still using minicm6 v1 now.. so far.. only some brightness issue.. others still testing.. bravo
The rom inly problem for me just reboot when install some games..other than that it was good
I found a problem in this rom.... With the X8 connected to the PC just to charge (no SD card mounted) and if i go play angry birds the phone wil reboot, tryed inumerous times and rebooted every time. Appens just to me?
http://www.mediafire.com/?lz6gwgohuakvbfo
Use this xRecovery and busybox included.
@extreminator: don't play angry birds when chargning
I have met this problem since 2 weeks ago when tried to install older cm mod.
And now, it came back when I really want to test c by ratch,or cm6.1 realease :-(
The way I tried to install :
- flash phone with seus
- root phone and install xrecovery (even with the file was posted above)
- factory reset (although wipe dalvik cache,wipe battery stats,step by step)
- Reboot phone...
Then have a trouble with fc :'(
Is there any body can show me if I did something wrong in process ? How can I fix it ?
Many thanks for all kind people here, and sorry for my bad English
Sent from my E15i using XDA Premium App

[Q] motorola defy does not start

Hi ..
I had updated defy to the latest cnmod nighty version. ( 110410 ). Eveerything was working fine. i played with the phone for the entire day. video acceleration was awesome and played gt racing.
Suddenly there was problem with wifi connection. I decided to restart the phone. Choose the reboot menu . and now the phone is stuck with the moto logo on startup. Nothing happens after that.
When the bluelight blinks after the android menu , when I press the down button , I get android bootmenu v1.0.5 (By cynongen defy team and galaxy) ,
i was not able to do anything from here. It has these menus :
1)Boot : boot is set to 2nd init
2)cpu settings
3)recovery : in the recovery menu , If i choose latest recovery or stable recovery , I get error in /system/bootmenu/script/recovery.sh (Result: no such file or directory) , and when I choose stock recovery , the phone restarts and is stuck with an exclamation mark )
4)tools: I could understand what to do here.
When nothing did work , I pressed both up and down button after changing boot to normal. there i cleared some cache or something , cleared everything that I could.
After all this my phone is in the same place. A moto logo on startup.
Please can someone help me . This is my first android phone and also the first costly phone I bought and I did something nasty on the first day itself.
i am a normal end user who knows nothing more than gui.
thanks in anticipation
hey
flash a stock 2.2.2 with RDS from bootloader
you gonna need latest defy drivers for windows plus a stable froyo i guess
google this "how to unblick a bricked defy"
let us know what you do and what changes
are you sure this is a case of bricked defy. I had read in many places it is very difficult to brick defy.
its not bricked
but that is what you need to search for to get the solution
i did so too
What "Natsikap" said.
Clear Data/Cache.
Flash Official Froyo 2.2.2 using RSDLite, Use your region correct Froyo (If you are from India use SEA15 Stock ROM -Get it here http://forum.xda-developers.com/wiki/index.php?title=Motorola_Defy). Everything will be Stock normal. Read everything in the wiki before you flash anything, esp read the "How to get back to Normal in case things go awry" part you will save yourself the High BP!
thanks all for your support.
i have installed the orginal manufactuer android froyo
and flashed it later with cynogenmod 7.1 for defy. The latest stable one that was released yesterday
One more question:
Should I unroot this cynogenmod .. so that I don't mess something.
congratulations
you sorta came from behind and am sorta left behind
question: does the 7.1 have any wifi issues? working properly?
tell me so i can make the jump too
thanks bro
sorry for the late reply..
no it does not have any issues.. at least i could'nt find any.
wifi was working like a charm. used it for around 2 hours ..
Couple of questions..
1) i don't lke the menus flying into the screen. How can i change this animation to the normal fade animation that came with original os.
2)should i unroot my cynogenmod should that i don't cripple it while playing with settings or someother way.
Do not unroot CM7. Make site you make a backup in recovery, that way if you mess something up you can just restore it. As for animations, go to settings> cyanogen settings> display, you should be able to change the animations. If not try spare parts app.
Swyped from my MIUI Defy
i have defy plus.....i havnt rooted it ...its working on original 2.3.6
my phone is starting but power button not working.....when i put it on charing lock screen comes to life but touch not working..
sometimes it remains on moto logo
please help

Categories

Resources