Database Users

[Q] Doesnt boot to Stock ROM

Can someone please identify/resolve my problem?
PROBLEM:
CANNOT BOOT TO STOCK NC 1.2 ROM
Whenever I try to boot, with microSD card inserted, I boot to ClockworkModRecovery. Inside CWM Recovery Console, version states it's 3.0.2.8. In ROM Manager, it says it's 3.2.0.1. (Because at some point in time, I tried to update it through the Rom Manager. It did say that it was updated successfully, but whenever I boot to CWM, it still says 3.0.2.8.
Whenever I try to boot, without microSD card inserted, I boot to CM7 Nightly Build 97. What appears is a green cyanogenmod logo followed by a cyan-colored "loading..." below, then a flash, then straight to the CM7 boot screen (the blue android on skateboard).
FACTS:
[*]I'm currently running CM7 Nighty Build 97 along with Dalingrin's OC Kernel set at 1200MHz (Which made it a lot responsive and faster, thanks to Dalingrin! ) at my NC.
[*]I have to remove the microSD in order to boot to CM7. If I don't remove the microSD, it goes to CWM.
[*]I don't know, I don't have, and I'm not planning to install --- ADB.
[*]My microSD is a SAMSUNG 16GB Class 2 microSD card--at least, that's what it says on the card--which came from a Red Sandisk packaging. Weird, I know. Just putting all the info here, maybe it'll help solve the problem.
[*]My NC came with a green dot on it's packaging. I was told it has something to do with the partitioning of it's internal memory, but from what I can see, my NC has 5GB of internal memory capacity.
THE STORY:
Before, I was running CM7 7.0.3 (Stable) on my nook.
With microSD inserted, I boot to CM7. What happens is there would be a flashing, cyan 'a n d r o i d . . .' text at the left side of the screen. Afterwards, the CM7 logo appears and boots to CM7.
With microSD removed, I boot to STOCK NC 1.2 ROM. What happens is a "Read Forever" logo would appear, then a colored 'n' logo, then 'nook color' logo, then home screen.
Then I found out that there's a way to overclock the NC but it requires installing nightly builds. At first, I was a bit skeptical of installing a non-stable build, but when I tried it out, man was I amazed. My NC got a lot faster. I installed the CM7 Nightly Build 97. But then, I found out that I couldn't boot to the STOCK NC 1.2 ROM anymore.
HOW I DID IT:
I followed this instruction to install CWM:
hxxp://mrm3.net/nook-color-updated-clockwork-recovery-bootable-sd/*
NOTE: I picked the 16GB link under "Clockwork Recovery v3.0.2.8-Old Nook Colors(not blue dot)" category since I have a 16GB microSD card and the other category "Clockwork Recovery v3.2.0.1-For new blue dot Nook Colors and Old Nooks" does not have a link for 16GB, only 1GB.
Then I followed this guide to install CM7 Nightly Build 97:
hxxp://mrm3.net/nook-color-how-to-install-cyanogenmod-nightlies/*
NOTE: I ignored the instruction "Only install if when you boot your nook it DOES NOT SAY READ FOREVER" and proceeded to installing the updated U-Boot 1.2 simply because I overlooked it at that time (could this be causing the problem?)
And this to overclock my NC:
hxxp://mrm3.net/nook-color-overclock-guide/*
NOTE: I ignored the fact that it says "Install 'update-CM7-dalingrin-OC-emmc-060911.zip'. " even though I was a bit skeptical. I did got skeptical a bit because I thought I should install instead the sd update instead of the emmc. But I proceeded anyway. (Could this be it?)
Can someone please identify what I've done wrong? Or can someone please give me a tutorial to fix it? Or at least point me to a tutorial that will fix the problem. I've been trying to find a way to fix it by myself by reading forums and blogs and stuff but I can't seem to find anything. I'm a noob, but I do know how to follow simple instructions. I'd really appreciate it if you can help me. :'(
*replace 'xx' to 'tt' to view the link.

You haven't done anything wrong, but you did get rid of your previous setup. You turned your SD card into a CWR bootable card, then installed CM7 to your internal memory. By doing this, you erased your stock 1.2 and replaced it with CM7. To get your SD card to stop booting to CWR, you can simply format the card. This will remove the boot files and it becomes a standard memory card once again. If you want your stock 1.2 back, there are threads here that explain how to revert back to stock. You might need that bootable SD card, however, so wait until you decide what you want to do before formatting the card.
Unless you have some reason to want your stock 1.2 back, I would suggest you just stick with what you have. It is what most of us are running.

xdajunkman said:
You haven't done anything wrong, but you did get rid of your previous setup. You turned your SD card into a CWR bootable card, then installed CM7 to your internal memory. By doing this, you erased your stock 1.2 and replaced it with CM7. To get your SD card to stop booting to CWR, you can simply format the card. This will remove the boot files and it becomes a standard memory card once again. If you want your stock 1.2 back, there are threads here that explain how to revert back to stock. You might need that bootable SD card, however, so wait until you decide what you want to do before formatting the card.
Unless you have some reason to want your stock 1.2 back, I would suggest you just stick with what you have. It is what most of us are running.
Click to expand...
Click to collapse
Thanks for that. I was sure I didn't do anything wrong.
My reason for wanting to get access to my stock ROM is for me to 'Archive' my epubs. I have like a million of them, and I do read a lot. I cant find a good app to view epubs just like the stock B&N NC 1.2 reader... so if I archive those epubs, I'd be able to view them through the nook for android app. And yup, I've tried putting the epubs in the nook directory, it's still not reading it. That's basically it. If you guys can find a better way to view epubs like the stock B&N, I'm happy. Any ideas?
I'm hoping to try Phiremod as well in the near future, just so I can get a feel of which ROMs are the best. I've seen people running a ROM that still has the original 'Nook Color' status bar at the bottom and a dock bar on the side.
See it here: hxxp://w w w.youtube.com/watch?v=8d7ncguNjrE*
I think it's cool. If that build can run all apps in my CM7 nightly (I recently updated to Build 100), and also if that can be overclocked to at least 1.2GHz, I'll be so happy.
Please comment on all your ideas!!!

up up up up up up.

Persistent, aren't you.
There are lots of free apps that can read epub files. I downloaded the free epub of 'Phantom of the Opera' from some random web site, then looked in the Market for an 'epub reader'. One called 'FB Reader' was one of the first results. Opened the book fine, had lots of user-changable options and settings. Lots of other such apps available. Did this all in about 3 minutes using only my Nook with CM7 installed to internal memory. Took me longer to type out this post.

[Q] Nook not booting using SD card CM7, goes into Nook mode

Hi,
Having a with a Nook where it will not complete boot of CM7 which is installed on an SD card. Instead it boots into the Nook Color software.
I hold down the power button till I see the green Cyanogenmod logo with the Loading text, which I think means it is booting from the SD card (I can get it to boot into CM recover), then the screen goes blank and something goes wrong and the boot process continous with the 'n' screen and eventually loads the Nook boot animation and ends with the Nook software loaded. The nook software seems to be running fine except I can't get the SD card to boot all the way.
I've tried 2 known good SD cards, which boot without problems on my second nook, so I know it is not the SD card. I suspect something got corrupted with the boot process files, so I have been trying to find a way to overwrite the existing files with a virgin copy.
1) Can't get ADB running, I suspect the ADB route is only possible if I have the nook booting in a rooted CM7 in the first place (if some one could confirm that would help)
2) I have tried the x8 boot fail reset as well as the erase and deregister option in the nook software with no change in the above behaviour.
3) My last hope is to do an update back to stock using the recovery mode of the SD card. I can copy an updater file to the small partition of the SD card that is visible on Windows. I found a 1.2 stock updater, but it is ~200MB which is too big to fit on the SD card. If someone could point me to a smaller updater or a sd image with CWM and >200MB space that would be very helpful. TY!

What exactly are you trying to do? If you are just trying to set up dual-boot of CM off of your SD card, you don't need to do anything to the stock B&N internal install. I've had good luck using the procedure in the [ROM][CM7] [v1.3] Size-agnostic SD Card image and CM7 installer for SD Cards thread.
Are you sure the initial CM install on your SD card went well? It's known to be very particular (see top of that thread) about what SD cards work. The first few times I tried, I didn't realize there were error when CM was initially extracted which led to similar failures. From what you've described, the SD setup is failing. Normally, you don't need to worry too much about what's on the internal emmc setup of the Nook Color.

bobstro said:
What exactly are you trying to do? If you are just trying to set up dual-boot of CM off of your SD card, you don't need to do anything to the stock B&N internal install. I've had good luck using the procedure in the [ROM][CM7] [v1.3] Size-agnostic SD Card image and CM7 installer for SD Cards thread.
Are you sure the initial CM install on your SD card went well? It's known to be very particular (see top of that thread) about what SD cards work. The first few times I tried, I didn't realize there were error when CM was initially extracted which led to similar failures. From what you've described, the SD setup is failing. Normally, you don't need to worry too much about what's on the internal emmc setup of the Nook Color.
Click to expand...
Click to collapse
Hi bobsto, some background. I've been using CM7 on a microSD for several weeks now. I dual boot between Nook SW and CM7 that way. I've been using the link you posted above to create the SD cards and so far I have not had to touch the eMMC files at all.
Then a friend messed around with the Nook I gave them with CM7 on an SD card. I don't what the friend did, but when I got the Nook back it would not boot into CM7. I pulled my SD card from my working Nook and it wouldn't work either. So I'm guessing someone screwed with the Nook internal files. So I am trying the factory restore of the Nook SW to see if that will fix the problem and allow me to load CM7 from the SD card again. Interestingly Nookie will boot from SD and CM7 won't. Still trying stuff to see what will fix the problem. Suggestions are welcome.

sfsilicon said:
Hi bobsto, some background. I've been using CM7 on a microSD for several weeks now. I dual boot between Nook SW and CM7 that way. I've been using the link you posted above to create the SD cards and so far I have not had to touch the eMMC files at all.
Then a friend messed around with the Nook I gave them with CM7 on an SD card. I don't what the friend did, but when I got the Nook back it would not boot into CM7. I pulled my SD card from my working Nook and it wouldn't work either. So I'm guessing someone screwed with the Nook internal files. So I am trying the factory restore of the Nook SW to see if that will fix the problem and allow me to load CM7 from the SD card again. Interestingly Nookie will boot from SD and CM7 won't. Still trying stuff to see what will fix the problem. Suggestions are welcome.
Click to expand...
Click to collapse
Gosh, I wish someone could figure this out.
I restored original stock after a full CM7 root and it went fine but I can NOT get a dual boot sd card to work.
It seems to install but when I reboot it shows CM7 screen briefly then always boots to Nook OS.
Tried many many different cards and image writers and CM7's and even a card from my other Nook which I know works.
It will not boot into the CM7 from the SDcard.
Any help?

grohval said:
Gosh, I wish someone could figure this out.
I restored original stock after a full CM7 root and it went fine but I can NOT get a dual boot sd card to work.
It seems to install but when I reboot it shows CM7 screen briefly then always boots to Nook OS.
Tried many many different cards and image writers and CM7's and even a card from my other Nook which I know works.
It will not boot into the CM7 from the SDcard.
Any help?
Click to expand...
Click to collapse
Try this for CM7 - http://forum.xda-developers.com/showthread.php?t=1022786
Nookie also works - http://forum.xda-developers.com/showthread.php?t=922324
Not sure what is going on, but it worked for me.

sfsilicon said:
Try this for CM7 - http://forum.xda-developers.com/showthread.php?t=1022786
Nookie also works - http://forum.xda-developers.com/showthread.php?t=922324
Not sure what is going on, but it worked for me.
Click to expand...
Click to collapse
Thanks, the first worked like a charm!
I made a 32gb CM7 sdcard.
Still wish I could have got the size-agnostic card to work, it bugs me when I can't figure stuff out.

grohval said:
Still wish I could have got the size-agnostic card to work, it bugs me when I can't figure stuff out.
Click to expand...
Click to collapse
I'm in the same boat, but after 1 day of research and trial and error I'm happy it works. Maybe someone smarter will see this and know the answer and solve my problem curiousity.

[Q] Please help!!! Noobie messed up NC (big time)

I have a Nook Color. Somehow (and I really can't recall how), I can no longer get to the B&N side of my Nook. Even with the micro-SD out, I still go directly into CYANOGEN. To make matters worse, every single app I try to get from the market will not download. Once I 'Accept & download', the app starts to download then I get an Error overlay screen: "name-of-software" could not be downloaded due to an error.
So I have a V--E--R--Y generic tablet that can't do much. Please help.
Thanx in advance...................................

How did you go about installing CM7? Did you install it to the internal storage?

Please help!!! Noobie messed up NC (big time)
That's part of the problem. I did not consciously install to internal memory, I wanted it to boot from the SD card.

That's what I did...
That's what I did once. I unwittingly installed it onto the internal memory. It also happened to be really buggy. I restored it to stock using Clockworkmod Recovery. Did you use the installer for the SD card?

On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card.
I put the ZIP file for: gapps-gb-20110828-signedgapps-gb-20110828-signed, and gapps-gb-20110828-newtalk-signed.
I tried the home-power key combo. It asks me if I'm sure that I want to restore to the factory. I say "Yes" but when the Nook starts up, I'm still in cyanogen mod.
Should I (re-)format the MicroSD, write 1gb_clockwork-3.2.0.1-eyeballer (or another version) then move recovery-clockwork-3.2.0.1-encore?
Aside from not being able to get back to B&N-supplied software, I can't do anything with the NC as an Android tablet.

OP, do you intend to install CM7 into the internal memory?

All I'm trying to accomplish is to get back to the factory NC settings. Once I can get there, I'll decide.

How to hard reset and Factory Default Nook Color - http://goo.gl/pSFui
Power down your NC. Wait approximately 10 seconds or so-- just give it a bit of a break between shut down and factory reset.
Press and hold power button and your "N" home button almost simultaneously-- press Power first and then the N.
Hold these until your screen flashes the "Touch the future of reading" message; hold for a second or two afterward, then release. You will then get a prompt asking if you want to reset your nook to factory. Press the home button to continue. It will ask you to confirm. Press the home key again. Your nook will deregister, reset, and when it reboots, you will see "Kate" in her tutorial video, as if you'd never registered it in the first place.
(Obviously your account info will still be valid-- simply register with your email/pw combo instead of creating a new account.)
Hope this helps- if so please click thanks
Sent from my MB860 using XDA App

I did this (more than once - grrrrrrrrrrrrr!). I never see the "touch the future....." message. Instead, I get a cyanogen mod 7 screen with the message "Booting into Recovery". Then I get a sickly yellow-greenish screen that asks (twice) if I want to teset. I confirm both times then it "wipes" the data. It then boots into a cyanogen mod 7 screen (and the skateboarding 'droid) and I go through the registration process.
Now, when I select a Google app, the downloading (Google Maps) seems to be taking forever, but at least I'm not getting the error I got before.
Also, I do not see the progress of the download that I'm used to seeing on my phone. All I see is "movement" under the "Downloading..." message. How long do I leave it before I abort the download?

Your micro sd card is removed right?
Sent from my MB860 using XDA App

mike11050 said:
On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card.
I put the ZIP file for: gapps-gb-20110828-signedgapps-gb-20110828-signed, and gapps-gb-20110828-newtalk-signed.
I tried the home-power key combo. It asks me if I'm sure that I want to restore to the factory. I say "Yes" but when the Nook starts up, I'm still in cyanogen mod.
Should I (re-)format the MicroSD, write 1gb_clockwork-3.2.0.1-eyeballer (or another version) then move recovery-clockwork-3.2.0.1-encore?
Aside from not being able to get back to B&N-supplied software, I can't do anything with the NC as an Android tablet.
Click to expand...
Click to collapse
Eyeballer is a clockwork recovery bootable SD image which is used to install stuff (e.g. CM7) to internal memory.
http://forum.xda-developers.com/showthread.php?t=1030227
VeryGreen (size agnostic thread) is the SD image which creates a full OS on the SD card itself leaving the internal memory alone.
http://forum.xda-developers.com/showthread.php?t=1000957
You have used the Eyeballer method and have therefore done an internal install. You must also have installed a CM7 zip not just the gapps zip as they are just google apps and not an actual ROM.
You have 2 ways forward.
The simplest is if you want to end up with internal CM7 and are not interested in running the B & N ROM. Start again by creating the Eyeballer SD card using win32diskImager. Make sure you use a real USB SD adapter and not a card slot on a laptop. Put onto the card the CM7 ROM zip. I recommend the one from the KANG MiRaGe thread in the development forum. It is the most up to date and stable version available at the moment. Also put on one gapps zip (20110828). Now put the card in Nook, Power up and when in recovery then use the menus to format system, data and cache. Do NOT format boot. Then flash the CM7 ROM zip, then the gapps zip. Power down and prepare a clean SD card either by reformatting the eyeballer card with something like the HP USB card utility or a partition manager in the PC like miniTools. You could also use a different SD card if you want to keep the eyeballer one for future use. Put the card back in, power up and you should now be in a stable CM7 environment where you can set up wifi, register with the Google market and download apps.
The second way if you really want to return to stock on the internal and run CM7 of the SD card then use the eyeballer method but instead of flashing CM7 and gapps you now use a return to stock zip. Make sure you still format the partitions as before.
http://forum.xda-developers.com/showthread.php?t=914690
Once you have it back to stock and upgraded to whatever stock you want then follow the VeryGreen method from the link above. Once the SD card has put CM7 on itself, do not worry that there is only a 114MB space if you ever put the card back in the PC. That is normal; it is just the boot partition that the PC sees. The rest of the card can be seen if you USB connect the Nook to the PC.

Yes it is. Also, even though I'm not getting an error, no apps are loading.

You absolutely rock!!!!!!!!!!!!!!
I'm back at the NC "baseline". I tried to go back to a 1.2 (which is what it came with) using "update-nc-stock-1.2-signed". Once I re-booted, it kept returning to the NOOK COLOR screen. Then I used a 1.0.1 from your last post. It came back fine with 2 exceptions. 1) I now have a message that I need to install a SD card. When I do, my (Windows Explorer) "Computer" screen only recognizes the SD card and not the Nook. These are piddly little issues, but if I can get them fixed, great! (Right now, I cannot upgrade the NC or move any books or load any apps.
Thanks again!!!!!!!!!!!!!!!

mike11050 said:
That's part of the problem. I did not consciously install to internal memory, I wanted it to boot from the SD card.
Click to expand...
Click to collapse
I had this same problem. Since I am a new member, and can't post links, I'm going to try to help.
Install Clockwork Recovery to an SD card. Yes, the same way you did when installing clockwork to the SD the first time.
There are some threads on other fourms (google is your friend) that have links to Update files that allow you to update while keeping clockwork recovery, and some that will remove clockwork recovery. If you can remove the SD card and boot into the Stock Nook OS, then don't worry about installing 1.0.0 or 1.0.1 like some of the forms say. Just place the .ZIP file of the hacked update (usually 1.3 or 1.4 I think) into the root folder of the SD card, then Install it on your NC just like installing CM7 onto the internal memory. Your nook should start working again. It restored mine to full functionality. I can now pay 3 Dollars for angry birds, but at least its not as terribly slow and laggy as it was with CM7.

mike11050 said:
You absolutely rock!!!!!!!!!!!!!!
When I do, my (Windows Explorer) "Computer" screen only recognizes the SD card and not the Nook. These are piddly little issues, but if I can get them fixed, great! (Right now, I cannot upgrade the NC or move any books or load any apps.
Thanks again!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
I had the same issue last weekend, somehow my internal memory had become unrecognizable to anything, and the local Barnes and Noble store had a SD card that repartitioned the internal memory, and I was back in business. And as an added bonus I now have the 4 GB app/BN partition and the 1 GB mostly useless partition.

mike11050 said:
On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card. ...
Click to expand...
Click to collapse
The instructions I see when googling around where I see that image mentioned are instructions for installing onto the Nook Color internal memory.
In the simplest case, making an n2a card is much less complicated than that ~ all you need is on the PC, write the size agnostic image, then drop in the CM7 build you want to use, then put the card in the Nook and it creates itself. There are upsides and downsides to different n2a methods, but that one seems to be the easiest ~ I've done it successfully several times, and I'm certainly nothing like an expert when it comes to these Android systems.
A recovery card image will make a bootable recovery card ... and while that might not have been what you needed to get what you want, its what you need to get the nook back to stock.
You might want to go to
http://forum.xda-developers.com/showpost.php?p=22809801&postcount=148
... to get a version of the 1.4.1 upgrade that your recovery card can install. You'll probably have to wipe all sorts of partitions, which means you'll have to sign in with the B&N store again and you'll get to download you B&N apps again, but that's pretty straightforward.
This OP in this thread:
http://forum.xda-developers.com/showpost.php?p=10623716&postcount=1
... says that it will be necessary to format ("wipe") the /data and /system partitions, but it doesn't seem like you'll lose anything you want to keep. After all, you've either overwritten or completely tangled up your stock B&N info.
That post above has 1.4.1. There should be a signed 1.4.2 lying around somewhere, but if not, once its back to stock, you can update to 1.4.2 the normal way, download the B&N update file, drop it in the root of the Nook, make sure its at least 30% charged, and let it go to sleep, which will run the update file.

[Q] A Few Problems.

so i have cm 7.3.0-encore installed and
1) i cant get the android apps to install
2)cm mod( rom manager 4.2.0.2 clockwork mod 3.2.0.1) will not let me updgrade to premium
when i try to download rom it tells me i must upgrade rom manager to latest version and when i press ok i get another box that says "the application ROM Manager process com.koushikdutta.rommanager) has stopped unexpectedly please try again" and when i press ok i get sent bact to the home screen.
3)when i try to reboot into recovery,1) with the sd card in,i get booted to the main cyanogen mod home screen
4) and when i try to install gapps i go into the recovery,/install zip from sd card/choose zip from sd card/confirm install/when it says install complete,i exit out(reboot system now)it goes back to the main nook color screen so i have to power the nook off and back on so it can boot into cm. once back in cm,i dont have any market.
Oh and my software version is 1.2.0
PLEASE HELP!!

As much as I or we want to help you, we are completely lack of info.
Please provide some basic info about your system and what you are trying to do.
1. Where did you get cm7.3.0?
2. On your very last sentence, 1.2.0. What is that?
3. How have you run "which ROM"? from eMMC or uSD?
Those info is a good start to get more help.

votinh said:
As much as I or we want to help you, we are completely lack of info.
Please provide some basic info about your system and what you are trying to do.
1. Where did you get cm7.3.0?
2. On your very last sentence, 1.2.0. What is that?
3. How have you run "which ROM"? from eMMC or uSD?
Those info is a good start to get more help.
Click to expand...
Click to collapse
i hvae to pull up the site i got the mod from (i believe it was the cyanogen forum,ill get back to you on that)
2 1.2.0 is the stock nook firmware.(i believe they are up to 1.4 now)
3 i have no idea what your talking about.(im hoping your asking wether im running from internal or sd card. if that is the case,im running from the sd card

OK... to help you there are several things we must know... since answers to each can influence the method we need to get things working as they should:
1. Which method did you use to setup your SD? i.e. verygreen's SASD, racks11479 or another method.
2. Which ROM are you having issues with? i.e. CM7 on SD, Stock 1.2 on eMMC
3. What "android apps" are you having issues with? i.e. google apps (gApps) or another specific "android" app... since they are ALL android apps.
If you used verygreen's SASD then you CANNOT use the stanard ROM manager and CWM to install gApps... you have probably screwed up your stock system and installed gApps there... not that it will work... but you are now no longer "stock"
If you can answer these questions and elaborate as to exactly what you have done, and are trying to accomplish, we can provide informed suggestions to you... otherwise we can flood this thread with a TON of solutions that will EVENTUALLY work... but waste lot of time and cause you much frustration along the way.

DizzyDen said:
OK... to help you there are several things we must know... since answers to each can influence the method we need to get things working as they should:
1. Which method did you use to setup your SD? i.e. verygreen's SASD, racks11479 or another method.
2. Which ROM are you having issues with? i.e. CM7 on SD, Stock 1.2 on eMMC
3. What "android apps" are you having issues with? i.e. google apps (gApps) or another specific "android" app... since they are ALL android apps.
If you used verygreen's SASD then you CANNOT use the stanard ROM manager and CWM to install gApps... you have probably screwed up your stock system and installed gApps there... not that it will work... but you are now no longer "stock"
If you can answer these questions and elaborate as to exactly what you have done, and are trying to accomplish, we can provide informed suggestions to you... otherwise we can flood this thread with a TON of solutions that will EVENTUALLY work... but waste lot of time and cause you much frustration along the way.
Click to expand...
Click to collapse
heres what i did step by step
1) got a sandisk 16gb micro sd card and fomatted it to fat 32.
2) used win image to burn generic sd card image to the sd card
3) once burned, i put cm7.3.0 encore zip file in the root of the sd card
4) put sd card in nook
5) let the install run
thats pretty much it it will not let me update the rom manger or install gapps
im trying to include pics of my rom manager and settings screens
so i have the cm mod running i just want to be able to install gapps and upgrade my rom manager

bigicedog said:
heres what i did step by step
1) got a sandisk 16gb micro sd card and fomatted it to fat 32.
2) used win image to burn generic sd card image to the sd card
3) once burned, i put cm7.3.0 encore zip file in the root of the sd card
4) put sd card in nook
5) let the install run
thats pretty much it it will not let me update the rom manger or install gapps
im trying to include pics of my rom manager and settings screens
so i have the cm mod running i just want to be able to install gapps and upgrade my rom manager
Click to expand...
Click to collapse
First off, you are running CM7.0.3, NOT 7.3 since it is not exist.
Secondly, I start following this post of yours. Pls note, whatever you did or have done described in your very first post were totally screw. Don't know who show you that.
Anyway,
Let's put it this way.
1. Your device is NC (NOOKColor)
2. Your NC is running stock ROM version 1.2.0 on eMMC.
3. You want to run CM7.0.3 on external uSD card.
4. You have problem getting Android apps.
Right? OK
1) got a sandisk 16gb micro sd card and fomatted it to fat 32. => good
2) used win image to burn generic sd card image to the sd card.
Ans: I strongly suggest you getting the Win32DiskImager since a lot of members reported having issue with WinImage.
3) once burned, i put cm7.3.0 encore zip file in the root of the sd card.
Again. It is CM7.0.3.
Assume after successfully done creating a bootable uSD using Win32Diskimager, put your cm7.0.3 (or suggesting using CM7.2-RC KANG) into the root folder, where you see those mlo, ramdisk, ... file. It should only 4 files there at this time.
4) put sd card in nook => correct
5) let the install run => it should
6 - after successfully install, it will automatically delete the cm7.0.3 zip file then shutdown.
7 - remove the uSD, put back into PC, download and copy GApps and put it the root folder, same place where you just put the ROM before.
Link: http://wiki.cyanogenmod.com/index.php?title=Latest_Version
Note: rolling all the way down and select one for CM7, not CM9
8 - remove the uSD off PC, put it back into the NC, power it up
9 - let it boot into CM7 first, do connect to your wifi at this point is a good choice, then reboot and choose reboot into recovery using the menu.
10 - after it boots back into recovery, it will install the GApps now and shutdown again.
11 - reboot and start using.
NOTE: the way I show you above is the easiest way. There are several ways that are so good and too convinience but it's far more advance for newbie. When you get used to the NC, you will find out more.
This link is very helpful:
http://forum.xda-developers.com/showthread.php?t=1000957

votinh said:
First off, you are running CM7.0.3, NOT 7.3 since it is not exist.
Secondly, I start following this post of yours. Pls note, whatever you did or have done described in your very first post were totally screw. Don't know who show you that.
Anyway,
Let's put it this way.
1. Your device is NC (NOOKColor)
2. Your NC is running stock ROM version 1.2.0 on eMMC.
3. You want to run CM7.0.3 on external uSD card.
4. You have problem getting Android apps.
Right? OK
1) got a sandisk 16gb micro sd card and fomatted it to fat 32. => good
2) used win image to burn generic sd card image to the sd card.
Ans: I strongly suggest you getting the Win32DiskImager since a lot of members reported having issue with WinImage.
3) once burned, i put cm7.3.0 encore zip file in the root of the sd card.
Again. It is CM7.0.3.
Assume after successfully done creating a bootable uSD using Win32Diskimager, put your cm7.0.3 (or suggesting using CM7.2-RC KANG) into the root folder, where you see those mlo, ramdisk, ... file. It should only 4 files there at this time.
4) put sd card in nook => correct
5) let the install run => it should
6 - after successfully install, it will automatically delete the cm7.0.3 zip file then shutdown.
7 - remove the uSD, put back into PC, download and copy GApps and put it the root folder, same place where you just put the ROM before.
Link: http://wiki.cyanogenmod.com/index.php?title=Latest_Version
Note: rolling all the way down and select one for CM7, not CM9
8 - remove the uSD off PC, put it back into the NC, power it up
9 - let it boot into CM7 first, do connect to your wifi at this point is a good choice, then reboot and choose reboot into recovery using the menu.
10 - after it boots back into recovery, it will install the GApps now and shutdown again.
11 - reboot and start using.
NOTE: the way I show you above is the easiest way. There are several ways that are so good and too convinience but it's far more advance for newbie. When you get used to the NC, you will find out more.
This link is very helpful:
http://forum.xda-developers.com/showthread.php?t=1000957
Click to expand...
Click to collapse
so i did everything and most of i went as planned until.....
10) i pressed the power button to power off and pressed reboot( i got 3 choices 1-reboot,2-recovery 3-bootloader) i pressed recovery and it rebooted back into cm7. so i powered down the nc,took the sd card out and powered on it went to the stock nc menu. so i re-inserted the sd card and rebooted through the clockwork mod menu,once again it booted into the cm7 without installing gapps, so i once again powered down took out the sd card,powered up.it finnaly booted into recovery so i inserted the sd card(again) went down to "install zip from sd card,choose zip from sd card chose gapps-gb-20110828-signed.zip.installed it said install from sd card complete chose reboot system now. it booted into stock nook.so i powered off and back on into cm7 just to find out GAPPS DID NOT INSTALL. so im at the point where im just gonna get a n2a premade card or something. but i do want to say to say THANK YOU TO EVERYBODY FOR YOUR HELP

bigicedog said:
so i did everything and most of i went as planned until.....
10) i pressed the power button to power off and pressed reboot( i got 3 choices 1-reboot,2-recovery 3-bootloader) i pressed recovery and it rebooted back into cm7. so i powered down the nc,took the sd card out and powered on it went to the stock nc menu. so i re-inserted the sd card and rebooted through the clockwork mod menu,once again it booted into the cm7 without installing gapps, so i once again powered down took out the sd card,powered up.it finnaly booted into recovery so i inserted the sd card(again) went down to "install zip from sd card,choose zip from sd card chose gapps-gb-20110828-signed.zip.installed it said install from sd card complete chose reboot system now. it booted into stock nook.so i powered off and back on into cm7 just to find out GAPPS DID NOT INSTALL. so im at the point where im just gonna get a n2a premade card or something. but i do want to say to say THANK YOU TO EVERYBODY FOR YOUR HELP
Click to expand...
Click to collapse
Did I just said whatever you did or have done, described on your very first post were screw up?
Why would you do that?
You follow to step 10, you are very close to get it up and running then you continue to do the wrong way. That's why you can't get your NC work.
On which instruction you got that shows you doing the "went down to "install zip from sd card,choose zip from sd card" when you are running CM7 from uSD?
My suggestion, start over again, go slow.
Since using the uSD, why not using the stable CM7.1 or CM7.2 KANG? Get rid of the 7.0.3

CM7/Honeycomb w/o apps

Hey and thanks ahead for any help.
I've been trying to figure this out the passed 24 hrs (bout 4 hrs of sleep) but I'm stuck.
I have a micro sd card (8GB class 6), I have the downloads I've read on here to unzip and write the images WinImage and WinRaR.
I have nookhoney04 (honeycomb), HoneyGApps.v2 in one folder I have generic-sdcard (cm7) and update-cm-7.1.0-encore-signed and gapps-gb-20110828-signed on the second folder. I can get both OS running just fine on this card (obviously after I erase 1 OS and write the other). However, everywhere I read tells me to take out my sd card and copy over the unzipped ZIP file containing the apps I assume to the card but my computer will not allow me to do anything until I reformat the sd card (erases everything).
My problem is I can't seem to figure out how to get google play or android market on either OS. I've watched numerous YouTube walk throughs but I am not very tech savvy. If anyone knows my problem or can walk me through it I would love you forever. Either one will do. I mainly just want to be able to get a nook app, kndle app and netflix app.

After you have the CM7 installed (don't use honeycomb, it is not stable) you should be able to put the SD in your PC and it should be able to read the boot partition. (If you can't, try a different card reader or a different PC). Copy the gapps...zip file to the boot partition. Put the card back in the nook and boot. Hold the n key until the boot menu comes up. Select SD and recovery and continue the boot. Gapps should install automatically. Then reboot and you can register the gapps. Use Market/Play Store to download your kindle, etc apps.

leapinlar said:
After you have the CM7 installed (don't use honeycomb, it is not stable) you should be able to put the SD in your PC and it should be able to read the boot partition. (If you can't, try a different card reader or a different PC). Copy the gapps...zip file to the boot partition. Put the card back in the nook and boot. Hold the n key until the boot menu comes up. Select SD and recovery and continue the boot. Gapps should install automatically. Then reboot and you can register the gapps. Use Market/Play Store to download your kindle, etc apps.
Click to expand...
Click to collapse
Thanks for your help.
No matter what I do, every time I reinsert the sd card into the computer after installing cm7 onto nook, it ask me to format it then refuses to allow me access to it unless I format the card. After I write the cm7 onto the card, copy the update 7.1.0, I can eject the sd card and place it back in and it reads it fine but after installing onto nook and placing back into the computer it makes me reformat. Does the nook write anything onto it?

skfore said:
Thanks for your help.
No matter what I do, every time I reinsert the sd card into the computer after installing cm7 onto nook, it ask me to format it then refuses to allow me access to it unless I format the card. After I write the cm7 onto the card, copy the update 7.1.0, I can eject the sd card and place it back in and it reads it fine but after installing onto nook and placing back into the computer it makes me reformat. Does the nook write anything onto it?
Click to expand...
Click to collapse
The solution is to start over and put both the CM7 zip and the gapps zip on the SD at the same time. It will then install both. If there is not room, go to my tips thread in my signature and get my updated image. It has been expanded so there is room for both.

leapinlar said:
The solution is to start over and put both the CM7 zip and the gapps zip on the SD at the same time. It will then install both. If there is not room, go to my tips thread in my signature and get my updated image. It has been expanded so there is room for both.
Click to expand...
Click to collapse
Alright, I erased the card, wrote cm7 onto it. After about 116mb remained. I copied the cm7 update to it and gapps (total is about 106 mb). I inserted it into the nook. Penguin showed, blue text scrolled. Said gapps was found and installed then said preparing to shut down. After it powered off, I turned it on and it went straight into the Nooks standard OS. Like if I didn't have a sd card in it lol