[Q] Doesnt boot to Stock ROM - Nook Color Q&A, Help & Troubleshooting

Can someone please identify/resolve my problem?
PROBLEM:
CANNOT BOOT TO STOCK NC 1.2 ROM
Whenever I try to boot, with microSD card inserted, I boot to ClockworkModRecovery. Inside CWM Recovery Console, version states it's 3.0.2.8. In ROM Manager, it says it's 3.2.0.1. (Because at some point in time, I tried to update it through the Rom Manager. It did say that it was updated successfully, but whenever I boot to CWM, it still says 3.0.2.8.
Whenever I try to boot, without microSD card inserted, I boot to CM7 Nightly Build 97. What appears is a green cyanogenmod logo followed by a cyan-colored "loading..." below, then a flash, then straight to the CM7 boot screen (the blue android on skateboard).
FACTS:
[*]I'm currently running CM7 Nighty Build 97 along with Dalingrin's OC Kernel set at 1200MHz (Which made it a lot responsive and faster, thanks to Dalingrin! ) at my NC.
[*]I have to remove the microSD in order to boot to CM7. If I don't remove the microSD, it goes to CWM.
[*]I don't know, I don't have, and I'm not planning to install --- ADB.
[*]My microSD is a SAMSUNG 16GB Class 2 microSD card--at least, that's what it says on the card--which came from a Red Sandisk packaging. Weird, I know. Just putting all the info here, maybe it'll help solve the problem.
[*]My NC came with a green dot on it's packaging. I was told it has something to do with the partitioning of it's internal memory, but from what I can see, my NC has 5GB of internal memory capacity.
THE STORY:
Before, I was running CM7 7.0.3 (Stable) on my nook.
With microSD inserted, I boot to CM7. What happens is there would be a flashing, cyan 'a n d r o i d . . .' text at the left side of the screen. Afterwards, the CM7 logo appears and boots to CM7.
With microSD removed, I boot to STOCK NC 1.2 ROM. What happens is a "Read Forever" logo would appear, then a colored 'n' logo, then 'nook color' logo, then home screen.
Then I found out that there's a way to overclock the NC but it requires installing nightly builds. At first, I was a bit skeptical of installing a non-stable build, but when I tried it out, man was I amazed. My NC got a lot faster. I installed the CM7 Nightly Build 97. But then, I found out that I couldn't boot to the STOCK NC 1.2 ROM anymore.
HOW I DID IT:
I followed this instruction to install CWM:
hxxp://mrm3.net/nook-color-updated-clockwork-recovery-bootable-sd/*
NOTE: I picked the 16GB link under "Clockwork Recovery v3.0.2.8-Old Nook Colors(not blue dot)" category since I have a 16GB microSD card and the other category "Clockwork Recovery v3.2.0.1-For new blue dot Nook Colors and Old Nooks" does not have a link for 16GB, only 1GB.
Then I followed this guide to install CM7 Nightly Build 97:
hxxp://mrm3.net/nook-color-how-to-install-cyanogenmod-nightlies/*
NOTE: I ignored the instruction "Only install if when you boot your nook it DOES NOT SAY READ FOREVER" and proceeded to installing the updated U-Boot 1.2 simply because I overlooked it at that time (could this be causing the problem?)
And this to overclock my NC:
hxxp://mrm3.net/nook-color-overclock-guide/*
NOTE: I ignored the fact that it says "Install 'update-CM7-dalingrin-OC-emmc-060911.zip'. " even though I was a bit skeptical. I did got skeptical a bit because I thought I should install instead the sd update instead of the emmc. But I proceeded anyway. (Could this be it?)
Can someone please identify what I've done wrong? Or can someone please give me a tutorial to fix it? Or at least point me to a tutorial that will fix the problem. I've been trying to find a way to fix it by myself by reading forums and blogs and stuff but I can't seem to find anything. I'm a noob, but I do know how to follow simple instructions. I'd really appreciate it if you can help me. :'(
*replace 'xx' to 'tt' to view the link.

You haven't done anything wrong, but you did get rid of your previous setup. You turned your SD card into a CWR bootable card, then installed CM7 to your internal memory. By doing this, you erased your stock 1.2 and replaced it with CM7. To get your SD card to stop booting to CWR, you can simply format the card. This will remove the boot files and it becomes a standard memory card once again. If you want your stock 1.2 back, there are threads here that explain how to revert back to stock. You might need that bootable SD card, however, so wait until you decide what you want to do before formatting the card.
Unless you have some reason to want your stock 1.2 back, I would suggest you just stick with what you have. It is what most of us are running.

xdajunkman said:
You haven't done anything wrong, but you did get rid of your previous setup. You turned your SD card into a CWR bootable card, then installed CM7 to your internal memory. By doing this, you erased your stock 1.2 and replaced it with CM7. To get your SD card to stop booting to CWR, you can simply format the card. This will remove the boot files and it becomes a standard memory card once again. If you want your stock 1.2 back, there are threads here that explain how to revert back to stock. You might need that bootable SD card, however, so wait until you decide what you want to do before formatting the card.
Unless you have some reason to want your stock 1.2 back, I would suggest you just stick with what you have. It is what most of us are running.
Click to expand...
Click to collapse
Thanks for that. I was sure I didn't do anything wrong.
My reason for wanting to get access to my stock ROM is for me to 'Archive' my epubs. I have like a million of them, and I do read a lot. I cant find a good app to view epubs just like the stock B&N NC 1.2 reader... so if I archive those epubs, I'd be able to view them through the nook for android app. And yup, I've tried putting the epubs in the nook directory, it's still not reading it. That's basically it. If you guys can find a better way to view epubs like the stock B&N, I'm happy. Any ideas?
I'm hoping to try Phiremod as well in the near future, just so I can get a feel of which ROMs are the best. I've seen people running a ROM that still has the original 'Nook Color' status bar at the bottom and a dock bar on the side.
See it here: hxxp://w w w.youtube.com/watch?v=8d7ncguNjrE*
I think it's cool. If that build can run all apps in my CM7 nightly (I recently updated to Build 100), and also if that can be overclocked to at least 1.2GHz, I'll be so happy.
Please comment on all your ideas!!!

up up up up up up.

Persistent, aren't you.
There are lots of free apps that can read epub files. I downloaded the free epub of 'Phantom of the Opera' from some random web site, then looked in the Market for an 'epub reader'. One called 'FB Reader' was one of the first results. Opened the book fine, had lots of user-changable options and settings. Lots of other such apps available. Did this all in about 3 minutes using only my Nook with CM7 installed to internal memory. Took me longer to type out this post.

Related

[Q] What to install...

I just bought a Nook Color for my girl and wanna root and install a costum Rom...since this is my first time doing this to a nook color (i have done this to my G1,Vibrant and Asus transformer) i wonder what is the most stable Rom?
should i go with Cm7 or Honeycomb?
Keep in mind that i'm looking for stable Rom...i don't want to get my girl mad at me..
Thanks in Advance..
Get a microSD card, and install CM7 onto that. You protect the B&N system, so you won't void the warranty. The entire OS and apps sit on the SD card. The Nook will attempt to boot to the SD card first, so you're golden. Any time you want to be back in the B&N mode - just pull the SD card. No need to root or anything.
Go here for the easy-to-read steps on how to make it happen:
http://quinxy.com/2011/04/01/comple...on-the-nook-color/comment-page-3/#comment-944
Even if you were to mess things up you can always restore the stock rom because it boots from the SD card. That's what's so awesome. I would also agree with cm7. There is a sticky in the apps thread that has a good start on what apps you should download first. Some are paid and some are free. Have fun!
I totally recommend Racks11479's Phiremod/Honeycomb dualboot MicroSD image. It automatically boots into Phiremod (CM7 variant) but also gives you the option to boot into Honeycomb if you want to play with that and an option to boot into stock Nook Color software without taking the MicroSD out. Very nice. Also, if you're worried about stability I highly recommend getting a class 4 Sandisk card to run it off of. If you read through some of the forums this seems to be the best card for running ROMS smoothly. You can find the Phiremod/Honeycomb image here: http://forum.xda-developers.com/showthread.php?t=1045018
Good luck!
And first thing make sure you have a SanDsik microSD card.
It can be a 4/8/16 gb class 2/4 card.
There are a lot of nookers who start out with the wrong card and have a lot of problems later on, not to mention waste of money for those high class cards.
Again good luck.
Echo everything that's been said in this thread.
You have all the right answers posted to get your feet wet without worry.
If you don't want to use the (more experimental) honeycomb on the sd install, just ignore it when you boot it and it goes to the more stable phiremod version of CM7 by default.
The memory card advice is no joke. If you get a whole mess of force-close issues running the rom recommended above from an sd install, it's either a bad download, bad flash, or (90% likely) you need the right memory card.
My sig has the link to the thread if you want to know why SanDisk.

MIUI Nook Color 1.9.16 on SD Card?

I have searched diligently and have yet to find specific instruction for creating a bootable SD card for my NC with MIUI Nook Color 1.9.16 (or any version of MIUI for that matter).
I am currently running a fully rooted version of 1.3 on the emmc and "all is well" and I need it left that way so as to continue having access to "in store reading" which I use quite a bit.
Have previously had CM7 and Phiremod running both internally and on an SD card at various times and tried to do a previous version of MIUI on the card using the same process without any luck.
Thanks in advance.
You can use verygreens method here -
http://forum.xda-developers.com/showthread.php?t=1000957
Important part is to rename the miui zip like this -
'How to update to a new build:
put the new build you want to try on the first partition. (the name must be update-cm-*.zip or cm_encore_full*.zip or just update-*.zip)'
..and it should work fine
cheers,
Many thanks as that did the trick!
Loaded and running from SD card.
It installed/is using the new Market interface (3.1.3?).
Where are/is "My Apps" as I do not seem to be able to find it.
D/L Netflix and it runs just as it should but the soundlevel at max is quite a bit lower than on rooted 1.3.
Free Koi living wallpaper looks beautiful.
My Apps - strangely there isn't one, but this works nicely -
http://forum.xda-developers.com/showthread.php?t=1154299
Sound level - Download nook tweaks from market and change settings in that
Cheers,
What did you rename the MIUI file? I've tried it a couple different ways and checked the MD5's, but keep getting errors. Unless my SD card has been corrupted somehow (I used it for other SD boots before this, so not too likely), I can't think of anything else causing the problem.
Hi. I tried putting the MIUI zip in the root of the sd card and booted into recovery as stated. It was renamed as one of the cm7 updates and installation went as per normal. However, when I did boot up the nook was stuck looping the MIUI animation and did not finish. What did I do wrong?
PhoenixClaw said:
Hi. I tried putting the MIUI zip in the root of the sd card and booted into recovery as stated. It was renamed as one of the cm7 updates and installation went as per normal. However, when I did boot up the nook was stuck looping the MIUI animation and did not finish. What did I do wrong?
Click to expand...
Click to collapse
Maybe just didn't wait long enough... the first boot takes a long time since the update script clears cache and dalvik cache.
Of course... this is just a wild guess since you didn't provide a whole lot of information... more information may yeild different feedback.
DizzyDen said:
Maybe just didn't wait long enough... the first boot takes a long time since the update script clears cache and dalvik cache.
Of course... this is just a wild guess since you didn't provide a whole lot of information... more information may yeild different feedback.
Click to expand...
Click to collapse
What kind of information? My nook color originally had the latest CM7 nightly on the sd card. I followed verygreen's method when I installed that. I used the NC normally. Then, I followed this thread and applied verygreen's method. I downloaded the MIUI rom from the miui thread, renamed it like the cm7 nightly zip ("cm_encore_full-253.zip") and put it in the root of the sd card. I put the sd card back in and booted via recovery. It installed and shut down. I turned it on again, and reached the MIUI globe thing. It was looping and stuck there for 30 minutes.
I've been thinking of trying miui.
If anybody has got.it running from SD please give the step-by-step procedure for the rest of us.
Thanks
A search would show you....
http://forum.xda-developers.com/showthread.php?t=1271982&highlight=Miui+sd
I hate to revive a dead thread, but I have been trying everything I could read or download.
I am using the Size-agnostic installer from this thread: http://forum.xda-developers.com/showthread.php?t=1000957
I am trying to flash MIUI 1.9.16 (MIUI.us_encore_1.9.16_Eng_Deo_ZipA_Signed_andmer) (http://goo-inside.me/miui/encore/)
I successfully installed CM7 to this Sandisk Class4 16gig microSD. Every time I try to flash MIUI, I re-burn the size agnostic card image, copy over the cm7-renamed MIUI ROM, and boot.
The installer seems to work, just like my CM7 installs. Then, when I try to reboot, it goes back to the installer (linux penguin at the top, goes through the motions of trying to flash another rom, when not finding anything, it shuts down).
I know I am missing something simple.
Am I to install CM7, then MIUI on top of it (without reburning the card)? Am I just using an SD-incompatible ROM? For those who were successful, where did you download the ROM from?
I know I have lots of questions, I hope you guys see my effort (that I don't just want someone to give me a quick fix), and I thank you in advance for your help.
Kind regards!
harryzee said:
Many thanks as that did the trick!
Loaded and running from SD card.
It installed/is using the new Market interface (3.1.3?).
Click to expand...
Click to collapse
I'm certainly no expert, but I have flashed two different versions of MiUi to micro SD cards adn then worked fine. You do not need to do i over CM7. Like you, I prepared a clean SD and used the size agnostic procedure. I renamed the MiUi file to some that started with update-cm-
I got my MiUi file here:
http://roms.miui.us/
I used a program called SD Formatter to format the card.. then I used the 1.3 version installer. I sometimes had problems using winimage to create this sd card . You have to select the drive letter for the sd card and then use the "restore" choice on the menu.
David, thanks for your response. I had already wiped it and installed CM7, but when I saw your post, I gave MIUI one last try. I downloaded from that site, and BAM, it installed perfectly! Thanks heaps!

[Q] Nook not booting using SD card CM7, goes into Nook mode

Hi,
Having a with a Nook where it will not complete boot of CM7 which is installed on an SD card. Instead it boots into the Nook Color software.
I hold down the power button till I see the green Cyanogenmod logo with the Loading text, which I think means it is booting from the SD card (I can get it to boot into CM recover), then the screen goes blank and something goes wrong and the boot process continous with the 'n' screen and eventually loads the Nook boot animation and ends with the Nook software loaded. The nook software seems to be running fine except I can't get the SD card to boot all the way.
I've tried 2 known good SD cards, which boot without problems on my second nook, so I know it is not the SD card. I suspect something got corrupted with the boot process files, so I have been trying to find a way to overwrite the existing files with a virgin copy.
1) Can't get ADB running, I suspect the ADB route is only possible if I have the nook booting in a rooted CM7 in the first place (if some one could confirm that would help)
2) I have tried the x8 boot fail reset as well as the erase and deregister option in the nook software with no change in the above behaviour.
3) My last hope is to do an update back to stock using the recovery mode of the SD card. I can copy an updater file to the small partition of the SD card that is visible on Windows. I found a 1.2 stock updater, but it is ~200MB which is too big to fit on the SD card. If someone could point me to a smaller updater or a sd image with CWM and >200MB space that would be very helpful. TY!
What exactly are you trying to do? If you are just trying to set up dual-boot of CM off of your SD card, you don't need to do anything to the stock B&N internal install. I've had good luck using the procedure in the [ROM][CM7] [v1.3] Size-agnostic SD Card image and CM7 installer for SD Cards thread.
Are you sure the initial CM install on your SD card went well? It's known to be very particular (see top of that thread) about what SD cards work. The first few times I tried, I didn't realize there were error when CM was initially extracted which led to similar failures. From what you've described, the SD setup is failing. Normally, you don't need to worry too much about what's on the internal emmc setup of the Nook Color.
bobstro said:
What exactly are you trying to do? If you are just trying to set up dual-boot of CM off of your SD card, you don't need to do anything to the stock B&N internal install. I've had good luck using the procedure in the [ROM][CM7] [v1.3] Size-agnostic SD Card image and CM7 installer for SD Cards thread.
Are you sure the initial CM install on your SD card went well? It's known to be very particular (see top of that thread) about what SD cards work. The first few times I tried, I didn't realize there were error when CM was initially extracted which led to similar failures. From what you've described, the SD setup is failing. Normally, you don't need to worry too much about what's on the internal emmc setup of the Nook Color.
Click to expand...
Click to collapse
Hi bobsto, some background. I've been using CM7 on a microSD for several weeks now. I dual boot between Nook SW and CM7 that way. I've been using the link you posted above to create the SD cards and so far I have not had to touch the eMMC files at all.
Then a friend messed around with the Nook I gave them with CM7 on an SD card. I don't what the friend did, but when I got the Nook back it would not boot into CM7. I pulled my SD card from my working Nook and it wouldn't work either. So I'm guessing someone screwed with the Nook internal files. So I am trying the factory restore of the Nook SW to see if that will fix the problem and allow me to load CM7 from the SD card again. Interestingly Nookie will boot from SD and CM7 won't. Still trying stuff to see what will fix the problem. Suggestions are welcome.
sfsilicon said:
Hi bobsto, some background. I've been using CM7 on a microSD for several weeks now. I dual boot between Nook SW and CM7 that way. I've been using the link you posted above to create the SD cards and so far I have not had to touch the eMMC files at all.
Then a friend messed around with the Nook I gave them with CM7 on an SD card. I don't what the friend did, but when I got the Nook back it would not boot into CM7. I pulled my SD card from my working Nook and it wouldn't work either. So I'm guessing someone screwed with the Nook internal files. So I am trying the factory restore of the Nook SW to see if that will fix the problem and allow me to load CM7 from the SD card again. Interestingly Nookie will boot from SD and CM7 won't. Still trying stuff to see what will fix the problem. Suggestions are welcome.
Click to expand...
Click to collapse
Gosh, I wish someone could figure this out.
I restored original stock after a full CM7 root and it went fine but I can NOT get a dual boot sd card to work.
It seems to install but when I reboot it shows CM7 screen briefly then always boots to Nook OS.
Tried many many different cards and image writers and CM7's and even a card from my other Nook which I know works.
It will not boot into the CM7 from the SDcard.
Any help?
grohval said:
Gosh, I wish someone could figure this out.
I restored original stock after a full CM7 root and it went fine but I can NOT get a dual boot sd card to work.
It seems to install but when I reboot it shows CM7 screen briefly then always boots to Nook OS.
Tried many many different cards and image writers and CM7's and even a card from my other Nook which I know works.
It will not boot into the CM7 from the SDcard.
Any help?
Click to expand...
Click to collapse
Try this for CM7 - http://forum.xda-developers.com/showthread.php?t=1022786
Nookie also works - http://forum.xda-developers.com/showthread.php?t=922324
Not sure what is going on, but it worked for me.
sfsilicon said:
Try this for CM7 - http://forum.xda-developers.com/showthread.php?t=1022786
Nookie also works - http://forum.xda-developers.com/showthread.php?t=922324
Not sure what is going on, but it worked for me.
Click to expand...
Click to collapse
Thanks, the first worked like a charm!
I made a 32gb CM7 sdcard.
Still wish I could have got the size-agnostic card to work, it bugs me when I can't figure stuff out.
grohval said:
Still wish I could have got the size-agnostic card to work, it bugs me when I can't figure stuff out.
Click to expand...
Click to collapse
I'm in the same boat, but after 1 day of research and trial and error I'm happy it works. Maybe someone smarter will see this and know the answer and solve my problem curiousity.

[Q] Please help!!! Noobie messed up NC (big time)

I have a Nook Color. Somehow (and I really can't recall how), I can no longer get to the B&N side of my Nook. Even with the micro-SD out, I still go directly into CYANOGEN. To make matters worse, every single app I try to get from the market will not download. Once I 'Accept & download', the app starts to download then I get an Error overlay screen: "name-of-software" could not be downloaded due to an error.
So I have a V--E--R--Y generic tablet that can't do much. Please help.
Thanx in advance...................................
How did you go about installing CM7? Did you install it to the internal storage?
Please help!!! Noobie messed up NC (big time)
That's part of the problem. I did not consciously install to internal memory, I wanted it to boot from the SD card.
That's what I did...
That's what I did once. I unwittingly installed it onto the internal memory. It also happened to be really buggy. I restored it to stock using Clockworkmod Recovery. Did you use the installer for the SD card?
On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card.
I put the ZIP file for: gapps-gb-20110828-signedgapps-gb-20110828-signed, and gapps-gb-20110828-newtalk-signed.
I tried the home-power key combo. It asks me if I'm sure that I want to restore to the factory. I say "Yes" but when the Nook starts up, I'm still in cyanogen mod.
Should I (re-)format the MicroSD, write 1gb_clockwork-3.2.0.1-eyeballer (or another version) then move recovery-clockwork-3.2.0.1-encore?
Aside from not being able to get back to B&N-supplied software, I can't do anything with the NC as an Android tablet.
OP, do you intend to install CM7 into the internal memory?
All I'm trying to accomplish is to get back to the factory NC settings. Once I can get there, I'll decide.
How to hard reset and Factory Default Nook Color - http://goo.gl/pSFui
Power down your NC. Wait approximately 10 seconds or so-- just give it a bit of a break between shut down and factory reset.
Press and hold power button and your "N" home button almost simultaneously-- press Power first and then the N.
Hold these until your screen flashes the "Touch the future of reading" message; hold for a second or two afterward, then release. You will then get a prompt asking if you want to reset your nook to factory. Press the home button to continue. It will ask you to confirm. Press the home key again. Your nook will deregister, reset, and when it reboots, you will see "Kate" in her tutorial video, as if you'd never registered it in the first place.
(Obviously your account info will still be valid-- simply register with your email/pw combo instead of creating a new account.)
Hope this helps- if so please click thanks
Sent from my MB860 using XDA App
I did this (more than once - grrrrrrrrrrrrr!). I never see the "touch the future....." message. Instead, I get a cyanogen mod 7 screen with the message "Booting into Recovery". Then I get a sickly yellow-greenish screen that asks (twice) if I want to teset. I confirm both times then it "wipes" the data. It then boots into a cyanogen mod 7 screen (and the skateboarding 'droid) and I go through the registration process.
Now, when I select a Google app, the downloading (Google Maps) seems to be taking forever, but at least I'm not getting the error I got before.
Also, I do not see the progress of the download that I'm used to seeing on my phone. All I see is "movement" under the "Downloading..." message. How long do I leave it before I abort the download?
Your micro sd card is removed right?
Sent from my MB860 using XDA App
mike11050 said:
On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card.
I put the ZIP file for: gapps-gb-20110828-signedgapps-gb-20110828-signed, and gapps-gb-20110828-newtalk-signed.
I tried the home-power key combo. It asks me if I'm sure that I want to restore to the factory. I say "Yes" but when the Nook starts up, I'm still in cyanogen mod.
Should I (re-)format the MicroSD, write 1gb_clockwork-3.2.0.1-eyeballer (or another version) then move recovery-clockwork-3.2.0.1-encore?
Aside from not being able to get back to B&N-supplied software, I can't do anything with the NC as an Android tablet.
Click to expand...
Click to collapse
Eyeballer is a clockwork recovery bootable SD image which is used to install stuff (e.g. CM7) to internal memory.
http://forum.xda-developers.com/showthread.php?t=1030227
VeryGreen (size agnostic thread) is the SD image which creates a full OS on the SD card itself leaving the internal memory alone.
http://forum.xda-developers.com/showthread.php?t=1000957
You have used the Eyeballer method and have therefore done an internal install. You must also have installed a CM7 zip not just the gapps zip as they are just google apps and not an actual ROM.
You have 2 ways forward.
The simplest is if you want to end up with internal CM7 and are not interested in running the B & N ROM. Start again by creating the Eyeballer SD card using win32diskImager. Make sure you use a real USB SD adapter and not a card slot on a laptop. Put onto the card the CM7 ROM zip. I recommend the one from the KANG MiRaGe thread in the development forum. It is the most up to date and stable version available at the moment. Also put on one gapps zip (20110828). Now put the card in Nook, Power up and when in recovery then use the menus to format system, data and cache. Do NOT format boot. Then flash the CM7 ROM zip, then the gapps zip. Power down and prepare a clean SD card either by reformatting the eyeballer card with something like the HP USB card utility or a partition manager in the PC like miniTools. You could also use a different SD card if you want to keep the eyeballer one for future use. Put the card back in, power up and you should now be in a stable CM7 environment where you can set up wifi, register with the Google market and download apps.
The second way if you really want to return to stock on the internal and run CM7 of the SD card then use the eyeballer method but instead of flashing CM7 and gapps you now use a return to stock zip. Make sure you still format the partitions as before.
http://forum.xda-developers.com/showthread.php?t=914690
Once you have it back to stock and upgraded to whatever stock you want then follow the VeryGreen method from the link above. Once the SD card has put CM7 on itself, do not worry that there is only a 114MB space if you ever put the card back in the PC. That is normal; it is just the boot partition that the PC sees. The rest of the card can be seen if you USB connect the Nook to the PC.
Yes it is. Also, even though I'm not getting an error, no apps are loading.
You absolutely rock!!!!!!!!!!!!!!
I'm back at the NC "baseline". I tried to go back to a 1.2 (which is what it came with) using "update-nc-stock-1.2-signed". Once I re-booted, it kept returning to the NOOK COLOR screen. Then I used a 1.0.1 from your last post. It came back fine with 2 exceptions. 1) I now have a message that I need to install a SD card. When I do, my (Windows Explorer) "Computer" screen only recognizes the SD card and not the Nook. These are piddly little issues, but if I can get them fixed, great! (Right now, I cannot upgrade the NC or move any books or load any apps.
Thanks again!!!!!!!!!!!!!!!
mike11050 said:
That's part of the problem. I did not consciously install to internal memory, I wanted it to boot from the SD card.
Click to expand...
Click to collapse
I had this same problem. Since I am a new member, and can't post links, I'm going to try to help.
Install Clockwork Recovery to an SD card. Yes, the same way you did when installing clockwork to the SD the first time.
There are some threads on other fourms (google is your friend) that have links to Update files that allow you to update while keeping clockwork recovery, and some that will remove clockwork recovery. If you can remove the SD card and boot into the Stock Nook OS, then don't worry about installing 1.0.0 or 1.0.1 like some of the forms say. Just place the .ZIP file of the hacked update (usually 1.3 or 1.4 I think) into the root folder of the SD card, then Install it on your NC just like installing CM7 onto the internal memory. Your nook should start working again. It restored mine to full functionality. I can now pay 3 Dollars for angry birds, but at least its not as terribly slow and laggy as it was with CM7.
mike11050 said:
You absolutely rock!!!!!!!!!!!!!!
When I do, my (Windows Explorer) "Computer" screen only recognizes the SD card and not the Nook. These are piddly little issues, but if I can get them fixed, great! (Right now, I cannot upgrade the NC or move any books or load any apps.
Thanks again!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
I had the same issue last weekend, somehow my internal memory had become unrecognizable to anything, and the local Barnes and Noble store had a SD card that repartitioned the internal memory, and I was back in business. And as an added bonus I now have the 4 GB app/BN partition and the 1 GB mostly useless partition.
mike11050 said:
On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card. ...
Click to expand...
Click to collapse
The instructions I see when googling around where I see that image mentioned are instructions for installing onto the Nook Color internal memory.
In the simplest case, making an n2a card is much less complicated than that ~ all you need is on the PC, write the size agnostic image, then drop in the CM7 build you want to use, then put the card in the Nook and it creates itself. There are upsides and downsides to different n2a methods, but that one seems to be the easiest ~ I've done it successfully several times, and I'm certainly nothing like an expert when it comes to these Android systems.
A recovery card image will make a bootable recovery card ... and while that might not have been what you needed to get what you want, its what you need to get the nook back to stock.
You might want to go to
http://forum.xda-developers.com/showpost.php?p=22809801&postcount=148
... to get a version of the 1.4.1 upgrade that your recovery card can install. You'll probably have to wipe all sorts of partitions, which means you'll have to sign in with the B&N store again and you'll get to download you B&N apps again, but that's pretty straightforward.
This OP in this thread:
http://forum.xda-developers.com/showpost.php?p=10623716&postcount=1
... says that it will be necessary to format ("wipe") the /data and /system partitions, but it doesn't seem like you'll lose anything you want to keep. After all, you've either overwritten or completely tangled up your stock B&N info.
That post above has 1.4.1. There should be a signed 1.4.2 lying around somewhere, but if not, once its back to stock, you can update to 1.4.2 the normal way, download the B&N update file, drop it in the root of the Nook, make sure its at least 30% charged, and let it go to sleep, which will run the update file.

help with rooting my nook color

Hi there
I am new to the tablet world and recently got a nook color. I decided I would like to make it more like a tablet and have been trying to root it but to no avail. I've tried everything, even the guides posted in the forums right here. Most recently I extracted the clockwork mod 3.2.1 to my 4g microsd plus moved a cyanogenmod zip to it as well. Every time I boot up my nook however, it goes straight into the normal OS welcome screen. My version is 1.4.3 and would like to find a guide that deals specifically with this version. I have been successful in the past getting into the microsd boot menu but the zip files that I install never show up. Thanks in advance for any pointers anyone can give me on this and I hope I am posting in the correct forum.
chanratt said:
Hi there
I am new to the tablet world and recently got a nook color. I decided I would like to make it more like a tablet and have been trying to root it but to no avail. I've tried everything, even the guides posted in the forums right here. Most recently I extracted the clockwork mod 3.2.1 to my 4g microsd plus moved a cyanogenmod zip to it as well. Every time I boot up my nook however, it goes straight into the normal OS welcome screen. My version is 1.4.3 and would like to find a guide that deals specifically with this version. I have been successful in the past getting into the microsd boot menu but the zip files that I install never show up. Thanks in advance for any pointers anyone can give me on this and I hope I am posting in the correct forum.
Click to expand...
Click to collapse
Looks like you are having two issues.
One is getting the CWM card to boot to CWM instead of stock. There can be several factors that determine whether the card will boot. Look at my Nook Color Tips thread linked in my signature and read item A9, bootable SDs. It talks about the issue. Rereading what you said, you say you "extracted to the SD", you mean you burned the .img file to the SD with burning software? Followed by copying the zips to the card?
The second issue is why your zip files don't show up. I am not sure what is causing that. When it boots to stock, can you see the files with the stock file manager? In the CWM menu when you do get it to boot to CWM, are you choosing the option that says "install zip from SD, followed by "choose zip from SD "?
Sent from my Nook HD+ running CM10 on Hybrid SD
While I'm not the OP, I am having the same problem. NookColor 1.4.3
I burned the SD agnostic image to a SD card. Then copied a CM7.zip build to the card. Placed that into the nook, powered on. It just boots stock.
The card shows up in stock OS, has the 5 files(MLO, u-boot.bin, uImage, uRamdisk, cm-7.2.0-encore.zip) that it had when in the PC and 3 added directories from the nook upon boot(B&N Downloads, LOST.DIR, My Files)
Have tried lots of other files on the SD card. It always boots stock. Tried different SD cards(SanDisk 8GB Class 4, Generic 1GB)
Have EVO rooting skills so I understand what I'm doing. This is my first Nook.
This thing is crap with locked app store. Need to root to either install my apps on stock or run full blown android. Dual boot would be ok too, but I don't care about warranty. I just want something to work.
Are you sure you have a Nook Color? You could have a Nook Tablet, they look just like a Color but have a silver bezel instead of black. The model number on the Tablet is BNTV-250. These cards will not boot on a Tablet.
Sent from my Nook HD+ running CM10 on Hybrid SD

Categories

Resources