Related
after I flash with CWM, I get this when it trys to boot android "nand kernel open failed"
Also, in CWM, I get "E:Can't find misc"
installing nand without CWM works.
bump- I searched and didn't find anything helpful. I've tried 3 different roms
"Can't find misc" should only appear if you don't have a misc partition in NAND. (which is created when flashing CWM)
And nand kernel open failure probably means theres no zImage or initrd.gz in the boot partition.
Try flashing CWM from the CWM thread and then a ROM.
Gabe3 said:
after I flash with CWM, I get this when it trys to boot android "nand kernel open failed"
Also, in CWM, I get "E:Can't find misc"
installing nand without CWM works.
Click to expand...
Click to collapse
How did you transfer the zip file to SD? Did you use magldr? If so try re-transfering using your comp, as Magldr sometimes corrupts them.
Ricey
I have this same problem. I reflashed cwm and now i dont get the misc but no matter which rom i install from cwm i always get the kernel error =\
d34thd34l3r said:
I have this same problem. I reflashed cwm and now i dont get the misc but no matter which rom i install from cwm i always get the kernel error =\
Click to expand...
Click to collapse
just redo everything. that fixed it for me.
Bump.
Did a clean install of TyphooN CyanogenMod 7 Nightly v3.3.1 and got the "nand kernel open failed" error.
I formated the SD-Card two times, reinstall cwm 150mb partition 3 times and still get the same error, first time within almost 1 year of android on my HD2 ._.
Any ideas or solutions welcome.
and another bump and sorry for my bad english =)
i get the "nand kernel open failed" error too.
i installed radio and hspl 2.08
then flashed MAGLDR 1.13
continued with CWM (250mb)
then formated my sd-card und put TyphooN CyanogenMod 7 on it
after installation, i get the error.
redid all 2 times now, nothing works.
NEED HELP ^^
Likewise i am getting it with hyperdroid v12
I've just got it with HD2 NDT MIUI GINGER ROM V13.0 Multilang :/ I reinstalled magldr,clm and the rom and formated in clm but still get the error! :S
[★] said:
I've just got it with HD2 NDT MIUI GINGER ROM V13.0 Multilang :/ I reinstalled magldr,clm and the rom and formated in clm but still get the error! :S
Click to expand...
Click to collapse
i say you have to do a clean wipe starting fro scratch task 29 it ad redo
bckstn said:
and another bump and sorry for my bad english =)
i get the "nand kernel open failed" error too.
i installed radio and hspl 2.08
then flashed MAGLDR 1.13
continued with CWM (250mb)
then formated my sd-card und put TyphooN CyanogenMod 7 on it
after installation, i get the error.
redid all 2 times now, nothing works.
NEED HELP ^^
Click to expand...
Click to collapse
me too same massege
bckstn said:
and another bump and sorry for my bad english =)
i get the "nand kernel open failed" error too.
i installed radio and hspl 2.08
then flashed MAGLDR 1.13
continued with CWM (250mb)
then formated my sd-card und put TyphooN CyanogenMod 7 on it
after installation, i get the error.
redid all 2 times now, nothing works.
NEED HELP ^^
Click to expand...
Click to collapse
Typhoon doesn't use 250mb CWM, use the one provided with rom 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5), most "nand kernel open failed" are down to wrong CWM size
I'm getting the same error, but only with sense 3.0 roms. Any other roms I've used have installed have worked. Is there a certain step I'm missing with installing sense 3.0 roms? I'm using MAGLDR v1.13 and Clockwork Recovery Mod v3.0.2.5. I flashed recovery_150m_cache_5m.zip onto the phone using magldr usb flasher. Any ideas?
cludseph said:
I'm getting the same error, but only with sense 3.0 roms. Any other roms I've used have installed have worked. Is there a certain step I'm missing with installing sense 3.0 roms? I'm using MAGLDR v1.13 and Clockwork Recovery Mod v3.0.2.5. I flashed recovery_150m_cache_5m.zip onto the phone using magldr usb flasher. Any ideas?
Click to expand...
Click to collapse
150mb for sense rom is definitely to low!
Read the rom's thread carefully guys!
It says there what CWR partition is needed.
Sense roms need SD CARD PARTITION so read the thread (it's first page).
If you have read it and your CWR partition looks exactly as it was given in the rom's thread then do task29, hspl, magldr 1.13 and CWR.
If it still doesn't work try different roms or try CLK.
Thanks for the response. How do I create a 5/240/5 partition through CWR? The last partition I made was just installed through .zip on CWR. Sorry for the questions, new to the hd2.
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
musashiz said:
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Click to expand...
Click to collapse
Hi guys, i had the same problem, and i figured maybe i can show u what i did, to help u.
i went to THIS thread and followed the instructions:
"Installation Guide for MAGLDR 1.13"
the error occured right after i flashed the MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M.zip onto my HTC HD2.
the only thing i had to do was enter magldr boot menu (hold off button while booting)
then i choose AD RECOVERY
CWM started up and i choose install zip from SD card
ofcourse i have placed NexusHD2-Gingerbread_V3.0_NAND_(Android-2.3.5).zip onto the ROOT of my SD card previously.
the .zip file installed perfectly and then i rebooted my phone.
all was ok after that..
hope this helps!
musashiz said:
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Click to expand...
Click to collapse
Awww, that was my mistake. It's working with the MAGLDR version now. Thanks for pointing that out
musashiz said:
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Click to expand...
Click to collapse
No we do not, thank you, this helped.
Hello, I'm having problems trying to change roms, I have mgldr 1.3 clockwork 150 partition and it flashed fine I can do a backup of my current miui rom from miui-dev.com but when I go to flash a new one it flashes like normal, but when it reboots I get a kernel error and it takes me to the magldr screen, have found no answer, any suggestions? Thanks
make sure the new ROM you are trying to flash is not for cLK.
When on CWM go to "mounts and storage" and sellect "format boot"
If those don't work, then the ROM dev did something wrong.
edit: make sure the CWM partitioning have for /boot about 8M (other builds are using 5M but MIUI needs 8M)
Both I've tried are clk lol are cwr roms obsolete now?
urquidezj said:
Both I've tried are clk lol
Click to expand...
Click to collapse
There are 2 bootloaders for HD2
MAGLDR and cLK.
You have MAGLDR so you should download ROMs made for MAGLDR.
urquidezj said:
are cwr roms obsolete now?
Click to expand...
Click to collapse
I don't understand your question
Sorry if it says magldr I can't download roms that flash through clockwork recovery? Like I have to flash through dft on a computer?
urquidezj said:
Sorry if it says magldr I can't download roms that flash through clockwork recovery? Like I have to flash through dft on a computer?
Click to expand...
Click to collapse
No cwm is not obsolete, you just don't yet understand what you are being told.
Both magldr and clk allow cwm roms to flash BUT if you have magldr you download magldr cwm roms, and if you have clk then you download clk cwm roms.
A good example is the typhoon rom,,, in that thread are two roms to download, the magldr version and the clk version, , both are the same rom, and both are cwm zip roms, but the clk wont work on a hd2 running magldr, and the magldr version wont work on a hd2 running clk.
Got it thanks
Hi.
I write from my brother account because i'm too lazy to create one
I have this problem with my HD2: after flashing most of the roms in the forum i receive, after boot animation, only a black screen.
I try to wait for hours but nothing change.
Can you help me pls? only old roms work well.
I use Magldr 1.13 and CWM 3.1.0.1 (but i try also with 4.0.0.0 and other versions)
Thank you in advance
Did you use the correct partition sizes for the different roms?
Sent from my HTC HD2
yes i check it everytime (usually is 150M/5M)
i also try a clean install from task29 but nothing
mmmh
now i flash a rom from another forum and it seems work.
the difference from before is that i not partitioning SD card but i only format it in FAT32.
can this may be the cause?
nothing solved. i try to flash the NDT Ginger 14.0 ROM but it give again black screen
please help
if you write your steps in detail we can see the missing part. try formatting sd using mgldr-ad recovery.
1 - download rom
2- check rom CWM partitioning
3 - wipe data, cache, dalvik
4 - flash rom
how do you make cwr partitioning? do you use daf or nand tool kit? do you make this in usb flasher mode in mgldr?
mutil said:
how do you make cwr partitioning? do you use daf or nand tool kit? do you make this in usb flasher mode in mgldr?
Click to expand...
Click to collapse
i try all the 2 methods above. nothing changes.
and yes i make it in USB flasher mode
I've had the same situation，you should flash the recovery more than 150 M，or you can try NDT miui rom, this is the web site ：http://forum.xda-developers.com/showthread.php?t=1010498
the other day i'd try to flash this rom but the result is the same.
maybe with more than 150M could work?
i try also with NDT ginger 14.0 but nothing
Try to flash new radio with task29 after it install original rom from sd. After start again install hspl cwm android)
Sawyer1103 said:
Try to flash new radio with task29 after it install original rom from sd. After start again install hspl cwm android)
Click to expand...
Click to collapse
new radio?
i have the 2.15.50.14
there is new one?
Hey!
I just flashed the newest TyphooN CyanogenMod 6.2 on my HD2 but after rebooting, the phone stucks on bootscreen. Can anyone help?
Chris
is this your first attempt on android? what steps have you taken? give us some clue to help you
oh no, before i flashed the new rom, i was running the 3.5.0 version of typhoon cyanogen mod. first i made a backup with clk. then i installed the .zip from sd card and after that restored the system. then i got some problem with booting, magldr. said: failed to open nand kernel. so i flashed 3.6.2 new and now it stucks ^^'
HD2Chris said:
oh no, before i flashed the new rom, i was running the 3.5.0 version of typhoon cyanogen mod. first i made a backup with clk. then i installed the .zip from sd card and after that restored the system. then i got some problem with booting, magldr. said: failed to open nand kernel. so i flashed 3.6.2 new and now it stucks ^^'
Click to expand...
Click to collapse
do you use clk or mgldr? have you wiped data/factory reset before flashing new rom? have you made proper nand partition?
well i use both i think. magldr to boot and clk to install everything or backup/restore,... i didn't wipe data/factory nor made something with the nand partition cause this wasn't the first time i tried install a newer version. i never had problems using this method to flash the new rom. that's why i'm a little bit surprised why it isn't working.
i solved the problem, flashing an older rom with no beta kernel. now it's booting, puhh.. but thanks anyway!
hey, i want to upgrade my ideos x5 from android 2.2 to oxygen 2.3.2 but all i get a bootloop. Solutions?
Have you tried wiping data and dalvik? Try do re-download the ROM, if not, download the stock ROM again (I suggest B138 or B163) and redo the flash.
You can download the stock ROMs and Oxygen HERE if you want. Be sure not to flash any ROMs intended for Ideos X5PRO if you have the normal Ideos. Check under the battery!
and when i installed oxygen and started to install 2.2 froyo back i had to push the sd card deeper that it would work and now i'm back to 2.2 and sd card works like a charm :S it's a 8gb sdhc thanks for the stock roms link btw and i will try to install oxygen again later if someone could make me an step by step manual
I think i will backup my froy to internal sd card just in case.
I wipe dalvik and cache and now i'm stuck in huawei logo... but i can still access cwm recovery.
Guess i can't get oxygen for my phone......
naamakala12345 said:
I wipe dalvik and cache and now i'm stuck in huawei logo... but i can still access cwm recovery.
Guess i can't get oxygen for my phone......
Click to expand...
Click to collapse
Are you using 5.0.2.6 recovery? Whipe data as well. Sometimes you need to flash the rom twice.
Yeah i have that, and i allways wipe the data before i flash it and i have flashed it several times but it just doesnt seem to work
actually i have cwm 5.5.0.4
naamakala12345 said:
Yeah i have that, and i allways wipe the data before i flash it and i have flashed it several times but it just doesnt seem to work
actually i have cwm 5.5.0.4
Click to expand...
Click to collapse
5.5.0.4 and 5.0.2.7 is for .35 kernel roms and 5.0.2.6 and 4.xxx are for the old .32 roms. So install this recovery: 5.0.2.6
and then whipe again, to be sure, and flash oxygen again.
Try out Version : V100R001C00B528G001
--------http://forum.xda-developers.com/showthread.php?t=1369296
~02.03.2012~ 【U8800】 2.3 Official Update 【Latest】
--------http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDEyNTU=
I'm gonna try the recovery out and let you know
cokratex said:
5.5.0.4 and 5.0.2.7 is for .35 kernel roms and 5.0.2.6 and 4.xxx are for the old .32 roms. So install this recovery: 5.0.2.6
and then whipe again, to be sure, and flash oxygen again.
Click to expand...
Click to collapse
it worked thanks!!