Database Users

nand kernel open failed

after I flash with CWM, I get this when it trys to boot android "nand kernel open failed"
Also, in CWM, I get "E:Can't find misc"
installing nand without CWM works.

bump- I searched and didn't find anything helpful. I've tried 3 different roms

"Can't find misc" should only appear if you don't have a misc partition in NAND. (which is created when flashing CWM)
And nand kernel open failure probably means theres no zImage or initrd.gz in the boot partition.
Try flashing CWM from the CWM thread and then a ROM.

Gabe3 said:
after I flash with CWM, I get this when it trys to boot android "nand kernel open failed"
Also, in CWM, I get "E:Can't find misc"
installing nand without CWM works.
Click to expand...
Click to collapse
How did you transfer the zip file to SD? Did you use magldr? If so try re-transfering using your comp, as Magldr sometimes corrupts them.
Ricey

I have this same problem. I reflashed cwm and now i dont get the misc but no matter which rom i install from cwm i always get the kernel error =\

d34thd34l3r said:
I have this same problem. I reflashed cwm and now i dont get the misc but no matter which rom i install from cwm i always get the kernel error =\
Click to expand...
Click to collapse
just redo everything. that fixed it for me.

Bump.
Did a clean install of TyphooN CyanogenMod 7 Nightly v3.3.1 and got the "nand kernel open failed" error.
I formated the SD-Card two times, reinstall cwm 150mb partition 3 times and still get the same error, first time within almost 1 year of android on my HD2 ._.
Any ideas or solutions welcome.

and another bump and sorry for my bad english =)
i get the "nand kernel open failed" error too.
i installed radio and hspl 2.08
then flashed MAGLDR 1.13
continued with CWM (250mb)
then formated my sd-card und put TyphooN CyanogenMod 7 on it
after installation, i get the error.
redid all 2 times now, nothing works.
NEED HELP ^^

Likewise i am getting it with hyperdroid v12

I've just got it with HD2 NDT MIUI GINGER ROM V13.0 Multilang :/ I reinstalled magldr,clm and the rom and formated in clm but still get the error! :S

[★] said:
I've just got it with HD2 NDT MIUI GINGER ROM V13.0 Multilang :/ I reinstalled magldr,clm and the rom and formated in clm but still get the error! :S
Click to expand...
Click to collapse
i say you have to do a clean wipe starting fro scratch task 29 it ad redo

bckstn said:
and another bump and sorry for my bad english =)
i get the "nand kernel open failed" error too.
i installed radio and hspl 2.08
then flashed MAGLDR 1.13
continued with CWM (250mb)
then formated my sd-card und put TyphooN CyanogenMod 7 on it
after installation, i get the error.
redid all 2 times now, nothing works.
NEED HELP ^^
Click to expand...
Click to collapse
me too same massege

bckstn said:
and another bump and sorry for my bad english =)
i get the "nand kernel open failed" error too.
i installed radio and hspl 2.08
then flashed MAGLDR 1.13
continued with CWM (250mb)
then formated my sd-card und put TyphooN CyanogenMod 7 on it
after installation, i get the error.
redid all 2 times now, nothing works.
NEED HELP ^^
Click to expand...
Click to collapse
Typhoon doesn't use 250mb CWM, use the one provided with rom 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5), most "nand kernel open failed" are down to wrong CWM size

I'm getting the same error, but only with sense 3.0 roms. Any other roms I've used have installed have worked. Is there a certain step I'm missing with installing sense 3.0 roms? I'm using MAGLDR v1.13 and Clockwork Recovery Mod v3.0.2.5. I flashed recovery_150m_cache_5m.zip onto the phone using magldr usb flasher. Any ideas?

cludseph said:
I'm getting the same error, but only with sense 3.0 roms. Any other roms I've used have installed have worked. Is there a certain step I'm missing with installing sense 3.0 roms? I'm using MAGLDR v1.13 and Clockwork Recovery Mod v3.0.2.5. I flashed recovery_150m_cache_5m.zip onto the phone using magldr usb flasher. Any ideas?
Click to expand...
Click to collapse
150mb for sense rom is definitely to low!
Read the rom's thread carefully guys!
It says there what CWR partition is needed.
Sense roms need SD CARD PARTITION so read the thread (it's first page).
If you have read it and your CWR partition looks exactly as it was given in the rom's thread then do task29, hspl, magldr 1.13 and CWR.
If it still doesn't work try different roms or try CLK.

Thanks for the response. How do I create a 5/240/5 partition through CWR? The last partition I made was just installed through .zip on CWR. Sorry for the questions, new to the hd2.

do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android

musashiz said:
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Click to expand...
Click to collapse
Hi guys, i had the same problem, and i figured maybe i can show u what i did, to help u.
i went to THIS thread and followed the instructions:
"Installation Guide for MAGLDR 1.13"
the error occured right after i flashed the MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M.zip onto my HTC HD2.
the only thing i had to do was enter magldr boot menu (hold off button while booting)
then i choose AD RECOVERY
CWM started up and i choose install zip from SD card
ofcourse i have placed NexusHD2-Gingerbread_V3.0_NAND_(Android-2.3.5).zip onto the ROOT of my SD card previously.
the .zip file installed perfectly and then i rebooted my phone.
all was ok after that..
hope this helps!

musashiz said:
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Click to expand...
Click to collapse
Awww, that was my mistake. It's working with the MAGLDR version now. Thanks for pointing that out

musashiz said:
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Click to expand...
Click to collapse
No we do not, thank you, this helped.

[Q] Can someone help me... please..

I'm here with one week old HTC HD2 (TMOUS) unlocked version (from BestBuy). I bought this to install Android. But after reading/searching hours and hours about installing instructions, I'm kinda confused now. I can install but don't know which one to begin and what goes after... pretty much the order of installation.
Currently, I have,
Windows Mobile 6.5 stock ROM
RAM 567MB
Flash memory size 1024MB
ROM version 3.14.531.1(04666) WWE
Radio version 2.15.50.14 (do I need to reflash radio?)
Manila version 2.5.20181424.0
Do I need to re-flash Radio?
I prefer to install cLK bootloader after reading 'senior member T-Macgnolia's' tutorial. Can someone kindly tell me, what to install and in which order?
How do I find cLK versions of HD2 Android ROM's? Any suggestions for better ROM?

Hi!!!
I don't use clk, I prefer magldr, but this is a guide to use clk:
http://forum.xda-developers.com/showthread.php?t=901305
hope it'll help you, otherwise someone else can help you better than me.
Your radio version I think is correct, I use it too, like all other people I think...
You find clk version of HD2 rom's generally in first posts of thread about NAND rom in HD2 Android NAND Development:
http://forum.xda-developers.com/forumdisplay.php?f=928
Roms: if you want a Sense rom, this is the best in my hopinion, very fast and smooth for a sense rom:
http://forum.xda-developers.com/showthread.php?t=1250703
I actually use this, has some problems (bluetooth, camera) but I like it very very much...
Otherwise, if you prefer non-sense rom, this is the best in my hopinion:
http://forum.xda-developers.com/showthread.php?t=933951

Your radio is correct,but you should flash HSPL before you flash custom WM ROMS or android builds. Ensure you flash the correct version of HSPL for your TMOUS. And as for the better builds, you should try them out yourself.It really depends on what you want.Sense,CM7,MIUI,MAGLDR,CLK...

kawshigan said:
Your radio is correct,but you should flash HSPL before you flash custom WM ROMS or android builds. Ensure you flash the correct version of HSPL for your TMOUS. And as for the better builds, you should try them out yourself.It really depends on what you want.Sense,CM7,MIUI,MAGLDR,CLK...
Click to expand...
Click to collapse
your radio is right
u need hardspl
magldr 1.13
RECOVERY 3.0.2.4
AND THEN THE PYRAMID ROM.............BEST 1 AROUND BAR NONE

suloch said:
I'm here with one week old HTC HD2 (TMOUS) unlocked version (from BestBuy). I bought this to install Android. But after reading/searching hours and hours about installing instructions, I'm kinda confused now. I can install but don't know which one to begin and what goes after... pretty much the order of installation.
Currently, I have,
Windows Mobile 6.5 stock ROM
RAM 567MB
Flash memory size 1024MB
ROM version 3.14.531.1(04666) WWE
Radio version 2.15.50.14 (do I need to reflash radio?)
Manila version 2.5.20181424.0
Do I need to re-flash Radio?
I prefer to install cLK bootloader after reading 'senior member T-Macgnolia's' tutorial. Can someone kindly tell me, what to install and in which order?
How do I find cLK versions of HD2 Android ROM's? Any suggestions for better ROM?
Click to expand...
Click to collapse
Try reading the guides in the sitckies of the NAND Android forum, especially MSkip's tutorial on how to flash NAND Android with Clockwork Mod.
Your radio is correct.
Install HardSPL (HSPL) 2.08 first.
Then install MAGLDR (I would recommend this as it's easier than CLK from what I've read.)
Select your ROM (don't flash yet)
In the OP of the ROM there will be guides as to which CWM partition you need etc, just download the right partition size and flash it. One of the reasons I recommend MSkip's tutorial is that all of the files are at the bottom of the post.
Flash the ROM via CWM.
Seeing as in the OP you said you understand how to flash the things, you should understand that I hope. Good Luck.

Thanks Ty5982, I followed one guide and installed cyanogenmod 7 ROM. What I did was
HSPL 2.08
(didn't touch radio since it's correct)
MAGLDR Bootloader 1.13
ClockworkMod Recovery v1.3 (made v1.3 150MB partition)
then went to 8. AD Recovery and installed ROM on the SD card using ClockworkMod Recovery.
As you said now I'm really interested about PYRAMID ROM since it has SENSE. Can you please tell me where to start with now?
Do I have to remove 'ClockworkMod Recovery'? or do I need to install RECOVERY 2.4?

Nigeldg said:
Try reading the guides in the sitckies of the NAND Android forum, especially MSkip's tutorial on how to flash NAND Android with Clockwork Mod.
Your radio is correct.
Install HardSPL (HSPL) 2.08 first.
Then install MAGLDR (I would recommend this as it's easier than CLK from what I've read.)
Select your ROM (don't flash yet)
In the OP of the ROM there will be guides as to which CWM partition you need etc, just download the right partition size and flash it. One of the reasons I recommend MSkip's tutorial is that all of the files are at the bottom of the post.
Flash the ROM via CWM.
Seeing as in the OP you said you understand how to flash the things, you should understand that I hope. Good Luck.
Click to expand...
Click to collapse
Thanks for the input. I did my first ROM installation... whhooohhoo . Thanks for all the help you all give here.
Now I'm really interested about PYRAMID ROM. But installation instructions doesn't say anything about CWM partition and it talk about different tools (http://forum.xda-developers.com/showthread.php?t=1185087)
Can you please tell me how I can remove this ROM and install PYRAMID ROM. Where should I start?

explanation made easier
make sure u av recovery 3.0.2.4 extracted on ur pc
right click on flash file NOT FLASH CFG and open it
CHANGE THE NUMBERS SO IT LOOKS LIKE BELOW:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 180M
cache ya 5M
userdata ya|asize|hr allsize
ONCE DONE,CLICK SAVE,NOT SAVE AS AND EXIT THE BOX
reeboot ur phone and keep hold of the power button so the magldr menu appears
go to USB FLASHER and select it
plug ur phone into ur pc
you should see USB............USB
when u do,go to the recovery folder and RIGHT CLICK ON DAF and RUN AS ADMINISTRATOR and click continue or yes or allow,what ever ur pc says
let it do its thing,then it reboots itself.
THIS WILL REPLACE YOUR OLD RECOVERY AND STAY THERE UNTIL U FLASH ANOTHER RECOVERY IF U EVER DO
when it does,unplug the usb from ur phone,keep hold of the power button again,but this time select AD RECOVERY
then select wipe cache,wipe data-factory reset,then go back and select ADVANCED and wipe dalvik cache,then select PARTITION SD CARD, select 2048M then select 0M,takes about 5 min.
THIS WILL WIPE UR SD CARD,SO BACK ANYTHING UP U NEED
then put the rom on ur sd card
go to magldr menu AGAIN and select ad recovery but this time select install zip from sd card,then select choose zip from sd card,choose ur rom,should start with NDT if its the same as mine lol,takes 10 mins max..........then your all done.........
when it boots up and the setup wizard appears,DO NOT SET UP,NO GOOGLE ACCOUNT OR WIFI,JUST KEEP ON CLICKIN NEXT,NEXT,NEXT,then when the home screen appears finally lol go to ur apps and click on QUICKBOOT and choose reboot,this time,fill in everythin on ur setup wizard..........then when it goes to the home screen,leave it for a min,REBOOT FOR THE LAST TIME,then the rom should settle......hope u enjoy it as much as i do.........
SORRY FOR THE LONG LIST,BUT THERE ARE SO MANY PPL ON ERE THAT JUST GIVE U A LINK WHEN U ASK FOR HELP...........I AINT 1 OF THEM,let me no how u get on and i'll then help u to tweak it to the max to get the best performance lol
HOPE THIS HELPS...................FEEL FREE TO HIT THANX

Ty5982 said:
make sure u av recovery 3.0.2.4 extracted on ur pc
right click on flash file NOT FLASH CFG and open it
CHANGE THE NUMBERS SO IT LOOKS LIKE BELOW:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 180M
cache ya 5M
userdata ya|asize|hr allsize
ONCE DONE,CLICK SAVE,NOT SAVE AS AND EXIT THE BOX
reeboot ur phone and keep hold of the power button so the magldr menu
Click to expand...
Click to collapse
Thanks for the instructions (hit the button ) and I greatly appreciate it. When I change FLASH file, how important is that numbers and how it change the behavior of my ROM?
I'm asking because I saw your first reply and went to SENSE 3.0 PYRAMID V 6.0 ROM and installed it. But original thread instruct to change " system ya 160M " and yours 180M.
Some how I managed to install it and first it was okay but I noticed ROM is kind of slow and Wi-Fi didn't work.
Any help with that issue??? (anyway I'm gonna re-flash it with your instructions)

Help - NAND installation MGLDR

Hi guys
Im currently an SD user.
I want to install this via nand: http://forum.xda-developers.com/showthread.php?t=1250703
I used to use MGLDR etc, is there an easy way to install this? As i cannot find exact info. As there is stuff like CLK and clockwork recovery mod.
Can anynone provide me an easy installation method to do this?
I will really appreciated. I love Android, i dont think i want to boot via WM anymore, and im sure this will also increase the performance? Thanks!!

Have you even tried to look for everything yourself?
I mean, you should have looked for "what is cLK, MAGLDR and CWM?"After doing that little search you should have known that the easiest way to do it is through the NAND toolkit stickied in the NAND forum after (of course) choosing which bootloader you want to use

I would start here:
http://forum.xda-developers.com/showthread.php?t=1044830
If you get stuck on something, just ask and I'll see if I can help you out.

after install MGLDR 1.13, my HD2 Doesnt start
Hi,
After installing MGLDR 1.13 my HTC HD2 doesnt start, I have just the HTC screen(whit screnn with HTC in green), it's freeze no menu.... nothing at all, just the white HTC Screen
Can please some one help me

You need to install a rom... download a daf file rom for your hd2 on to your computer... unzip it... run the daf file... do all this your phone have to be plug in to your computer... in magldr... select USB flash... wait for it to say.... USB....USB. then run daf file that you just unzipped....
Or install clockwork mod recovery (install through USB flasher) with the right partition for the rom.... the rom have to be for magldr... the downloaded rom also have to be transfer to your SD... but into magldr... select ad recovery... then follow prompt... this is the best way to flash rom...
Sent from my LG-P999 using XDA App

neolan said:
Hi,
After installing MGLDR 1.13 my HTC HD2 doesnt start, I have just the HTC screen(whit screnn with HTC in green), it's freeze no menu.... nothing at all, just the white HTC Screen
Can please some one help me
Click to expand...
Click to collapse
Google or Search here how to flash HSLP to a version needed for this ROM. Be sure also having the right MAGDLR version installed after HSPL. (easier to change than SPL).
I recommend using CWM. (press long red button while booting - go 8. Recovery AD - mount USB - get .zip of ROM on SD and install from .zip)
I recommend you to make sure your SPL version and MAGLDR versions are right before continuing. Also a total wipe or SD formatting (just search here for the stickies) must be (optional) done.
The white screen comes from ? Just guess ? Did you install a ROM ?

If it were no rom flashed, it would stop at the magldr menu. If a phone goes straight to bootscreen after flashing magldr it means either the spl isn't 2.08.hspl or the radio isn't a 2.xx.50.
@neolan enter bootloader, set 2.08.hspl, re enter bootloader, flash radio 2.15.50, the phone will now start into magldr and you can proceed flashing cwm.

[Q] Help! Сan't flash recovery

I can't flash recovery. When I tried flash recovery then phone is stuck and flasher on PC finished with error. I tried flash WM65 and after flash CWM again, but nothing. Also tried task 29.
Any ideas?

Does it get stuck in the same place every time?

hengsheng120 said:
Does it get stuck in the same place every time?
Click to expand...
Click to collapse
yes it is

help plz! anyone had issue like me?

could it be a corrupted ROM file? have you tried other ROMs?

mengfei said:
could it be a corrupted ROM file? have you tried other ROMs?
Click to expand...
Click to collapse
rom file is ok, i tried different versions of cwm, but nothing. when i flashing cwm, phone is stuck (like on screenshot)

sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb. insert it to your device.
1. task29
2. radio rom 2.15.50.14
3. magldr 1.13
4. recovery 5.0.2.6
5. clear cache and dalvik cache.
use this tool www.mediafire.com/?2qz0xa7xfxney47
and use this radio ; www.mediafire.com/?1th8o158r2t6dba

powerofthink said:
sequence;
first check your device if it is 2.08.HSPL,
1. task29
2. radio rom 2.15.50.14
3. magldr 1.13
4. recovery 5.0.2.6
use this tool www.mediafire.com/?2qz0xa7xfxney47
and use this radio ; www.mediafire.com/?1th8o158r2t6dba
Click to expand...
Click to collapse
Yeah, for once I give a +1 to Task29, although it isn't really necessary most of the time. Can you flash a stock ROM via the SD card? You said that you tried to flash WinMo then CWM again, but you didn't say whether or not it actually worked.

powerofthink said:
sequence;
1. task29
2. radio rom 2.15.50.14
3. magldr 1.13
4. recovery 5.0.2.6
use this tool www.mediafire.com/?2qz0xa7xfxney47
and use this radio ; www.mediafire.com/?1th8o158r2t6dba
Click to expand...
Click to collapse
powerofthink I've tried it, but nothing.
May be this issue becouse i have bad blocks?

Nigeldg said:
Yeah, for once I give a +1 to Task29, although it isn't really necessary most of the time. Can you flash a stock ROM via the SD card? You said that you tried to flash WinMo then CWM again, but you didn't say whether or not it actually worked.
Click to expand...
Click to collapse
WinMO work fine, but CWM still not working, stuck, stuck, stuck...
1) flash official WM6.5 ROM
2) task29
3) magldr
4) cwm (there phone is stuck)

sequence is important!!!. and also it depends on your android rom.
i hope you dont have any other hardware problem.

powerofthink mate, i know how flash hd2, and i know all sequence. I flash my hd2 many time, but one day i have problem with CWM... I hope we are solve this problem

emuleq said:
WinMO work fine, but CWM still not working, stuck, stuck, stuck...
1) flash official WM6.5 ROM
2) task29
3) magldr
4) cwm (there phone is stuck)
Click to expand...
Click to collapse
Mmm..
Just checking
1. have you checked that you have 2.08.HSPL installed? (power on with Volume down)
2. Have checked that installation of Radio_Leo_2.15.50.14 was successful?
3. No problems with flashing the MAGLDR? (Do you get the menu when you press and hold POWER?
4. Did you flash the 250 Mb version of recovery succesful? (Recovery_v1.3_250M.zip)
Please note that as soon as you performed a DAF flash in between, your Recovery does not work anymore.
My reccomendation is that you perform all these tasks using HD2-Tool which is absolutely brilliant. If it doe not work tryu again from the start. (try it without SIM card and SD Card in your phone till you get Recovery working)
(I did this when I bricked one of my 2 HD2's, and was able to get it up and running again)
Good luck!!

strange that winmo is running fine, how about giving clk a try.

Have u tried to flash stock WM 6.5?

[Q] **** Solved **** Cannot install Nand Roms....

:victory:****** Solved *******
Hi, thank you for all of your help and assistance.
It was all down to selecting the correct partitions (and me getting over enthusiastic in flashing roms and not reading FULLY on how and what partitions are required)
I have used HD2 Nand toolkit, and partitioned MAGLDR, then partitioned SD card within Clockworkmod.
Thank you all again for pointing me in the right direction...
Good Evening All,
I am sorry if this has been covered. I have searched the forums but cannot find an answer.
I have read all the FAQ and How-to's.
I am not an exact newbie, I have owned a HD2 before (about 2 years ago) and could install all sorts of different roms (including NAND)
I have Installed my Radio 2.15.50.14
I have installed HARD SPL 2.08
I have Installed MAGdlr 1.13
I ahve installed clockwork mod recovery 1.3 with 400M
Copied rom to root of SD Nexus HD2 jellybean v1.2 [dataonext]
and I have installed Nexus HD2 jellybean v1.2 [dataonext]
this installed fine,
I then decided to try another,
I downloaded QSEA_JB-MUSIC EDITION_V1 and placed on root of SD,
I booted into Magldr, then into clockwork mod
from here i wipe data, and factory reset,
wipe cache partition
and wiped delvic cache.
Then i install zip from sd card QSEA_JB-MUSIC EDITION_V1
when this is done,
It asks me to reboot,
Then it stays on the boot screen, and the rom does not load.....
I can restore the back up from the original rom install. but whatever rom I install (from Nand rom downloads) none of them install...
Please help...
Matt

matt_tee said:
Good Evening All,
I am sorry if this has been covered. I have searched the forums but cannot find an answer.
I have read all the FAQ and How-to's.
I am not an exact newbie, I have owned a HD2 before (about 2 years ago) and could install all sorts of different roms (including NAND)
I have Installed my Radio 2.15.50.14
I have installed HARD SPL 2.08
I have Installed MAGdlr 1.13
I ahve installed clockwork mod recovery 1.3 with 400M
Copied rom to root of SD Nexus HD2 jellybean v1.2 [dataonext]
and I have installed Nexus HD2 jellybean v1.2 [dataonext]
this installed fine,
I then decided to try another,
I downloaded QSEA_JB-MUSIC EDITION_V1 and placed on root of SD,
I booted into Magldr, then into clockwork mod
from here i wipe data, and factory reset,
wipe cache partition
and wiped delvic cache.
Then i install zip from sd card QSEA_JB-MUSIC EDITION_V1
when this is done,
It asks me to reboot,
Then it stays on the boot screen, and the rom does not load.....
I can restore the back up from the original rom install. but whatever rom I install (from Nand rom downloads) none of them install...
Please help...
Matt
Click to expand...
Click to collapse
1-Why? Use the HD2 NAND Toolkit to partition your system according to the developer.
2- Never reboot directly from the "reboot now" option of amarullz's installer. Instead, uncheck the "reboot now" option, click finish and reboot manually from CWM.
(The reboot option somehow makes your rom not boot, at least that happens to me every time)

Marvlesz said:
1-Why? Use the HD2 NAND Toolkit to partition your system according to the developer.
2- Never reboot directly from the "reboot now" option of amarullz's installer. Instead, uncheck the "reboot now" option, click finish and reboot manually from CWM.
(The reboot option somehow makes your rom not boot, at least that happens to me every time)
Click to expand...
Click to collapse
Thanks,
I will give it a go!
Have already downloaded toolkit, and just watching the video on how to use...
Matt:fingers-crossed:

So, do I just use Magldr to partition and don't install CWM?
I tried to re-partition with CWM, but lost magldr.....
What am I doing wrong?
Still cannot install NAND rom.
Going to do Task 29 again, where from there??
Thanks for your help and patience...

try the links below, it might help

matt_tee said:
So, do I just use Magldr to partition and don't install CWM?
I tried to re-partition with CWM, but lost magldr.....
What am I doing wrong?
Still cannot install NAND rom.
Going to do Task 29 again, where from there??
Thanks for your help and patience...
Click to expand...
Click to collapse
I don't use magldr, so I am not sure.
But I think you have to "MAGLDR recovery update" first, and then after it finishes you have to "magdlr repartition". Im not sure though.

How do I just install clockwork mod? Without using Magldr?
If I Task29 first,
What's my next step.....?

After Task29 (don't do task29 again) you have to do the following: http://forum.xda-developers.com/showthread.php?p=25781675#post25781675 until you see the "recovery" .. from there, dont continue to flashing wp7, just put your rom on your sd and flash it from recovery. (don't forget to thank the the one who made the thread/guide)
Don't forget to NOT use 300mb, but use the one written on your rom's thread.

matt_tee said:
How do I just install clockwork mod? Without using Magldr?
If I Task29 first,
What's my next step.....?
Click to expand...
Click to collapse
You can't have CWM without MAGLDR. If you've flashed CWM you shouldn't have lost MAGLDR at all, so I don't know what you did wrong. Task 29s are also almost always useless and unnecessary, if a guide says 'task 29' as the first step then usually you can just skip that part. I find that the best guide is the one in my sig, try it out.