[Q] sip account for android 2.3 SE ARC HElp - Xperia Arc General

how can i addd a sip account to call numbers world wide not just sip2sip
what is the best provider and what is the settings
2- may i ve posted thiis issue previously but here iam again sorry
Installed vpn settings and vpn installer and downloaded the zip file for (freeopen vpn provider) and the (air vpn ) but i canot start niether freevpn nor the air vpn is there another version of vpn installer and vpn settings for SE ARC (GINGERBREAD). isit a tun file error ? please help
P S i made the same settings on x10 and it worked BUT on SE ARC ?
2-Another question PLEASE.
air vpn site was allowin me to generate a configuration file now i canot why where can i generate a configuration file for a specified ip address?
thnks
REGARDS

Hi I have used sipgate for sip calling on mine and it works well, can receive & make calls I have also set up voip.co.uk to do the same. If you use any of these and need ahand with the settings let me know
Sent from my GT-P1000 using Tapatalk

The arc allows you to setup sip account in call settings. I use pennytel so i only need to enter sip.pennytel.com.au my number and password
Also give you choice how to choose bt voip or cell when you dial.
Call quality quite good
Sent from my LT15i using XDA Premium App

I suggest the simple and free SIP provider: antisip.com
Go to http://sip.antisip.com/account/ and create your account with very simple steps.
After created, you can go to your Android 2.3 phone and enter your sip information:
SIP username: <you created username>
SIP password: <you created password>
SIP server: sip.antisip.com
And select the [Main Account] option.
Then you done. You can test your sip phone with a SIP phone software on PC, like X-Lite, etc...

Related

Airtel Delhi MMS problem

Hi guys,
Is any wizard user in delhi (India) using airtel as service provider?
The problem i'm facing is that i'm not able to send/recieve MMS messages on my O2 mini s.
I've tried contacting airtel people and they just gave me the settings they have in their book, But after various efforts it's not working.
The GPRS and rest of the things like sms, mail etc are working fine.
Here are the settings they gave me
Server Name : Airtel MMS
Gateway : 100.1.201.172
Port : 9201
Server Address : http://100.1.201.171:10021/mmsc
Connect using : GPRS
If anyone is using some other settings or if there is something that i'm missing then please lemme know.
Regards
Vineet
vanny said:
Hi guys,
Is any wizard user in delhi (India) using airtel as service provider?
The problem i'm facing is that i'm not able to send/recieve MMS messages on my O2 mini s.
I've tried contacting airtel people and they just gave me the settings they have in their book, But after various efforts it's not working.
The GPRS and rest of the things like sms, mail etc are working fine.
Here are the settings they gave me
Server Name : Airtel MMS
Gateway : 100.1.201.172
Port : 9201
Server Address : http://100.1.201.171:10021/mmsc
Connect using : GPRS
If anyone is using some other settings or if there is something that i'm missing then please lemme know.
Regards
Vineet
Click to expand...
Click to collapse
Same problem once upon a time.
But I have found that I was able to sucessfully send an MMS at night. I mean very late night or early morning I should say. When I asked the helpdesk, they told me that I happen to be in a network congested area. But then she was kind enough to give a reset on my profile which took me out of the network for a couple of minutes. When I was latched again, viola !!! no problems !!
Try that.!
By the way, what speeds do you get ? I get an excellent speed in Mumbai on Airtel than on Orange. Orange sucks real bad these days.
Hi araje,
Thanks for the reply. I've tried the resetting thing also but it was of no use.
Anyway I've found out the solution to this problem. Actually the GPRS settings that we use, has got the problem. Here's what i did ...
I created a new GPRS connection with the name MMS ( Cellular line (GPRS)).
gave the access point as airtelmms.com
In the advanced tab use "server assigned IP address", and enable the box "Use Ip header compression".
Now comes the real part...... in the servers tab, use "specific server address" and specify DNS as 100.1.201.172 and press OK.
Now to use the MMS part u go to connection settings, connect using this new connection and u'll be able to send and recieve MMS with out any problems.
For browsing and all use the other (ur normal) GPRS connection.
Though switching between connections is a pain in the a** but as i don't use MMS too much, it's ok for once in a while.
Well, Airtel provides EDGE connection in delhi (that's what my phone indicates me :wink: ), but when i use it to download something on my pc it gives me a speed of 4-5 Kbps. Though it is not good to surf on pc (anyway i use broadband at home and work), but is good enough to work on my wizard.
Also i cannot complain about it coz i get it for 99 bucks a month ... so what else could u expect
Vineet
Hey Vineet,
Are you able to connect to Airtel Live ?
From the website here are the settings. I have been able to set some stuff but points 8,9,10-14 are tricky. I tried following your settings you used for mms but didnt help. Any idea how to set this ?
1 Connection Name: Airtel Live!
2 Data Bearer: GPRS
3 Access Point Name: airtelfun.com
4 Username: MSISDN e.g. 91982xx xxxxx
5 Prompt Password: No
6 Password: < blank >
7 Homepage: http://live.airtel.in
8 Connection Security: Off
9 Session Mode: Permanent
In case of the WAP 2.0 complaint phones, the following extra settings need to be done:
Under Options > Advanced Settings
10 Phone IP Address: Automatic
11 Primary name server: 0.0.0.0
12 Second. Name server: 0.0.0.0
13 Proxy server. address: 100.1.200.99
14 Proxy port number: 8080
hey what phone are you using??
i've mentioned the settings for wizard (O2 mini s), iguess others will also have similar settings.... try that and let me know...
I am using Qtek9100 with AKU rom.
The new connection I created was exactly on your lines.
vanny said:
I created a new GPRS connection with the name MMS ( Cellular line (GPRS)).
gave the access point as airtelmms.com
In the advanced tab use "server assigned IP address", and enable the box "Use Ip header compression".
Now comes the real part...... in the servers tab, use "specific server address" and specify DNS as 100.1.201.172 and press OK.
Click to expand...
Click to collapse
I set most of the stuff based on the way you created your connection. But how did you specify the port 9201. In my case I put the server ip mentioned in point13 in the DNS entry. But there isnt anyway to enter the port number.
Are you able to use the airtel live website ? Also one thing is that my Airtel mobile office works perfect since I dont have to enter any advance settings. Just the APN, and no userid/password. However, the airtel live website doesnt load with this connection. I use it mainly for laptop.
Thanks for your help in advance
Anup
Airtel Karnataka MMS settings
Those of us who have approached Airtel for help in configuring MMS on Windows Mobile devices know that their very competent customer service reps are blissfully unaware of the existence of Windows Mobile OS leave alone its variants like WM 5, WM 6 and 6.1. Ans when they direct one to their 'special GPRS helpdesk' the special GPRS guys haven't heard of anything newer than WM 5 because they attempt to walk one through the WM 5 UI.
Well to avoid calling Airtel, activate the MMS service on your account by sending a text message MMS ACTV to 222. Once the service is active, do not ask for MMS settings to be sent over the air as Windows Mobile doesn't accept OTA settings. Instead key-in the settings yourself:
MMS Settings for the Sony Ericssson X1i (Xperia)
Windows Mobile 6.1
1. Tap Start -> Settings
2. On the Settings screen tap on the Connections tab
3. Tap the Connections icon
4. Tap Manage Existing Connections
5. Tap on New to create a new data account
6. Type-in AirtelMMS or MMS under Enter a name for the connection
7. Choose Celular Line (GPRS, 3G) from the drop-down list under Select a modem
8. Tap Next
9. Type-in airtelmms.com under Acess point name
10. Tap Next
11. Leave the username, password and all other fields blank
12. Tap Finish
If there is more than one data connection configured on the Manage Existing Connections page, please ensure that the radio button beside Auto Pick is selected.
Tap OK to exit and tap OK once again to return to the main settings page.
Tap Start -> Messaging
Tap SMS \ MMS
Tap Menu -> MMS Options
Place a check mark beside the following:
• Save sent messages
• Allow delivery Report
• Allow Read report
Set the Retrieval mode to Auto
Set the Attempts before giving up to 3
Tap on Servers
Tap New
Under Server Name enter AirtelMMS or MMS
The Gateway should be set to 100.1.201.172
The Port number should be set to 8799
Enter http://100.1.201.171:10021/mmsc under server address
Under Connect Via, please choose the name of the data account created in step 6 above
Choose 100K as the send limit
And set the WAPVersion to WAP 2.0
Tap Done
Tap OK to return to SMS \ MMS
and bob's your uncle

dial-up email advice please

Hi
I am trying to setup my o2 exec to send and receive email from my work.
I have to dial in to a modem using a user id and password. I then have to use a 2nd id and password to access the email. Has anyone got any tips on how to do this? I have all the settings and can get a pc with modem to work ok.
I have tried to setup a modem using the settings I have, and I have tried to setup an email account to use the modem but I keep getting no modem on this connection. If I dial the connection number on a landline I can here the modem connection.
Any help would be appreciated. Fast running out of Nurofen Plus
Thanks
ph236
Are the modem connected to your PC or it's a wireless modem and connected to your PPC?
Hi ranju
What I need to do is to connect my xda exec to my work dial-up by just using the xda not any external modem or pc
ph236
First of all, you should be able for accessing internet from your ppc through activesync or wireless connection.
Now, create a new pop3 account in ppc. Follow the steps:
1. enter the email address
2. your name, email user id (i.e. [email protected]), password and tick on save password.
3. account type (i.e. pop3).
4. server address (i.e. in = pop.gmail.com, out = smtp.gmail.com).
5. click on options. select the connection to be used.
6. click on next. uncheck incomming ssl authentication (in case of gmail), check outgoing authentication (in case of gmail) and uncheck use separate settings.
7. finish and close messaging client.
8. open the messaging client and click on send receive.
Hope it will help. You may also do a softreset after the configuration.
Hi ranju
I need to be able to connect via the dial-up modem at work and my exda on the move using the in built phone.
I need to dial into the modem from my xda to the work modem. make a connection using user id and password.
When the connection is established I then need to use a second id and password to get to my email store.
I won't have a pc connection during any of this.
Sorry if I was a bit misleading.
Peter
Let's try to split a problem into 2 parts.
1) Establish a connection using your GSM connection (without GPRS) = "dial-into" your work server.
2) Check your mail.
So, for 1)
you need your XDA to recognise ISP/Work mode properly first.
By default Work mode is for addresses that are either without dots (e.g. server1), or those found on exception list (e.g. intra.company.com/*), otherwise ISP mode is used.
In Settings > Connections, under Connections, there's Advanced tab where you can find Exceptions list. Add your company intranet mask to it.
Then under same Settings/Connections/Connections, go to Tasks tab, Configure your ISP for normal GPRS, so you're still able to browse Internet via GPRS. But configure your WORK connection using modem! Enter name and select for a modem "Cellular Line" AND NOT "Cellular Line (GPRS, 3G)" or others. It will ask you for number to be dialed to work server. Best if you put it in international format. Then enter usename, password and domain on the next screen - and Advanced will give you more options like "Software Compression" or "IP Header Compression".
On Advanced tab select Dialing Rules... button if you have different rules of dialing to work depending on where you are. This would only be needed if your charges for local phone call are different from national number.
Now any attempt to get some data from server1 or server1.intra.company.com will automatically connect you to WORK via your chosen way - that is just modem. If you have modem and VPN, modem takes precedence.
2) Configure your mail client as usual. Be sure that your mailserver name falls into "Work" category: either just Netbios name or DNS name which responds to Exceptions list. Attempt to Send/Receive should refer to this server which in turn should cause dialing via normal modem and not GPRS with automatic username/password provision.
ranju has already provided instructions on how to deal with Email configuration
That's all folks!
Ta-da.
Hi EastExpert.
Thanks for the info I will give a try. Hopefully I can lay off the nurofen for a while.
If I have any difficulties is it ok if I ask for your expertise again.
Cheers
ph236

cool programs for P4350

Hello y'all, anybody knows and suggests any cool - free and safe - programs for this pda? anything useful to get my hands on. thanks
Call for free with your mobile phone, by wlan or gprs
Just installed SJphone
and uses it with voipbuster. works great
This is how to install:
-First download Voipbuster for your own pc. Install it and make an new account.
www.voipbuster.com
-Download SJPhone and install for your pda
http://www.sjlabs.com/sjp.html
Right click on SJPhone. Select Option menu and then click in Profiles tab. Click on new button, type the name of your profile (i recommend voipbuster) and select Profile "Calls though SIP proxy) and click OK button. A new window appears.
In this new windows click on SIP Proxy tab an fill the following fields: Proxy Domain: sip.voipbuster.com : 5060, User Domain: sip.voipbuster.com; Accept other fields defaults by pressing OK Button.
Finally, Right click on SJPhone and select Restart option. You user id and password will be asked. (That you used when you signed up with voipbuster
It works great with my wlan connection.
thanks!!
Dear Rewind,
Thank you very much for taking your time and for your suggestion. I will try it out. Its really surprising that you can talk for free from your mobile. Your mobile phone service providers must not like you very much
Regards...
I just tried it with gprs but that didnt worked with my phone, I think the connection will be to slow..????
But on wlan it works perfect.
and I used around 0,5mb a minute by gprs ( and with a 25mb datalimit ) i cant very long phonecalles.

Tesco Internet Phone on WM6

wondered if anyone could help me, im trying to set up TIP in wm6, ive emailed tesco and theyve sent me the settings which are:
SIP Protocol
Domain: sip.tescointernetphone.com
Proxy Server Address: sip.tescointernetphone.com
Proxy Server Port: 5060
Registrar Server: sip.tescointernetphone.com
Registrar Server Port: 5060
Outbound Proxy: sip.tescointernetphone.com
Outbound Proxy Port: 5060
SIP Signalling Port: 5060
SIP Data Port: 5004
User ID / Authentication Name: Tesco Internet Phone Number
Authentication Password: Tesco Internet Phone password
ive entered them in using the sip config tool, i can now recieve calls but when i dial it says number may be invalid.
Any help would be great
Need help on the same thread
How do i set up VOIP using Tesco's VOIP service. The internet phone supplied by them is not a valid PPC application ! I'm based out of India and I get a lot of voicemails on my Tesco no. Would be great if i'm always connected
fring and tesco sip
being trying today and set user as phonenum of tip, pass as password set up, proxy as sip.tescointernetphone.com in fring, and it rings on incomming with caller id, but hangs up when answered, and out does not work, it hangs up before first ring. i assume it is not negotiating a audio codec stream channel between end points, but the sip protocol layer is working to inform.
i hope it does work soon, as it is a bit of a pain in the arse.
trying this at moment
http://wiki.xda-developers.com/index.php?pagename=VoIP_on_Windows_Mobile_6 and
ftp://xda:[email protected]/WM6VoIP.CAB
and
http://thinkabdul.com/2007/04/25/sip-config-loader-free-utility-to-automatically-configure-load-_setupxml-file-for-sip-voip-on-windows-mobile-60-device/
gets TIP available on a 3g network with data plan.
will try calls later after top up
no need for fring
Anyone else having any problems / luck getting this up and running?
I using these settings from the first post above, but get the "No Service" error on my device. sipgate settings work fine and I can use the same TIP settings in XDA-Lite without any problems at all!
Hi.
I have never tried to set up tesco on WM but have manged to get it to work on Symbian. The way I got it to work was to leave the proxy settings blank and just filled the registrar settings with 'sip.tescointernetphone.com'.
It was alot of trial and error. I'm sure you can do it.
Good luck.
Tesco Internet Phone
Had no luck with the voip in wm6, so been using this software, using tesco iax settings.
USER= Tesco Internet Phone Number
PASS= Tesco I.P Password
SERVER= gateway.tescointernetphone.com.
Not as nice looking as keypad ets in wm6 but works ok.
It used to work
I did get it working at one point, but it has been No Service for many months now.
PPC-IAX works
Just wondered about the other settings for input and output.
Tesco Internet Phone settings on fring
download fring on your mobile
register and then login
then click on sip
go down the list list and choose other
you will be asked to enter thefollowinguser:
ID enter your tescointernet phone number
eg 0207432****
password enter the passwrod for your tescointernetphone it is the same one as the one for the account .
proxy address type the following : sip:voicedot.net.uk.sbc.lon.uk.voicedot.net
enjoy tescointernetphone on your mobile
the good thing about fring it can connect you via 3g connection or a wi fi connection . 3g connection is better quality but you need tocheck with your phone provider if they will charge you for the data use
http://www.fring.com/fring_is/why_fring/
goodluck

CSIPsimple instructions

Can someone place tell me step by step on how to use this program? I am trying to be able to make phone calls from my SGT and have download Google Voice/callback and CSIPsimple....
Do I make up my own phone # when trying to setup using sipgate????
HELP!!!!
Sent from my Sprint Galaxy Tab
Not sure what you mean about creating your own phone number. The DID is normally provided by your SIP provider.
I am using my Callcentric account with CSIPsimple and the setup was pretty straight forward.
As with any SIP connection, you are going to need
username:
password:
gateway:
proxy:
Once you register with the server, your tab will be ready to make SIP calls.
im using a sipgate number as my google voice black..installed fring app and configured the sip addon in there.
Sent from my GT-P1000 using XDA App
edit google voice call back.
Is there any one "best" way to do this? I'm using the hacked skype and google voice. I'd like to be able to click on the hyperlink phone numbers on websites and call, but it wont do that. It tells me the dialer is disabled.
CSIPSIMPLE not working on galaxy note ...
Hi there ... can someone pls confirm that csipsimple can still be used to access MJ accounts? I read somewhere that MJ recently blocked SIP usage on mobile devices; if this is the case, pls let me know as I am starting to get mental cramps from making this thing work on my samsung note.
thks!

Categories

Resources