Issue with [ROM] CM 6.1.3 [V006] Kernel-010 - XPERIA X10 General

Hi,
I've flashed my X10 with [ROM] CM 6.1.3 [V006] Kernel-010 [13-05-11]
and now it don't stop rebooting.
Someone know why it doing it??
My baseband is .58
Ps. I'm posting here because i'm new in forum and can't reply the post [ROM] CM 6.1.3 [V006] Kernel-010 [13-05-11] [Tweaked+Theme+Extras]
Thanks

This is probably because custom kernels ( i.e. if you have flashed the custom kernel ) work on baseband 52.
P.S Should be in the Q&A section.

Sorry!!
Next question will be there.
I'll try change BB now.
Be right back.
Edit: I tried this and nothing... continuous reboot...
another idea?

sbr.anderson said:
Sorry!!
Next question will be there.
I'll try change BB now.
Be right back.
Edit: I tried this and nothing... continuous reboot...
another idea?
Click to expand...
Click to collapse
Reflash the rom.

OmegaRED^ said:
Reflash the rom.
Click to expand...
Click to collapse
^What he said.
1) First wipe everything, factory reset, cache partition, format cache, dalvik cache.
2) Flash the ROM : http://www.mediafire.com/?7xwcdvyx8fw6cr0
3) If you are on baseband 52, flash the baseband patch http://www.multiupload.com/U020F08R3N
4) Then flash the hotfix http://www.mediafire.com/?2c27ssr123e7rrv

kozxmartt said:
^What he said.
1) First wipe everything, factory reset, cache partition, format cache, dalvik cache.
2) Flash the ROM : http://www.mediafire.com/?7xwcdvyx8fw6cr0
3) If you are on baseband 52, flash the baseband patch http://www.multiupload.com/U020F08R3N
4) Then flash the hotfix http://www.mediafire.com/?2c27ssr123e7rrv
Click to expand...
Click to collapse
Doing it now.
Edit: The problem continues...rebooting...
And I see the baseband appears "unknown baseband"

Install rom
Then bb52
Bbpatch
Reboot phone get signal
Install kernel
Reboot phone and let it reboot a few times it will get stable after about 5 times
Sent from my X10i using Tapatalk

WB's rom is using baseband 54 and above, meanwhile K010 needs baseband 52. Here are the steps :-
1. Fresh install the stock rom with SEUS.
2. Root & install xrecovery using flashtool.
4. Flash the X10_52_ChangeBaseband.ftf using flashtool.
5. Reboot into recovery and wipe everything.
6. Install CM_6.1.3_[v006].zip.
7. Install CMFix_v6_v61.zip.
8. Install bb patch cm5bb49.zip.
9. Install 2.6.29.6 FX k010 froyo FXR busybox in xbin v06.zip (get it on the first page of WB's thread).
10. Reboot.

I may be wrong, but shouldn't you just install bb patch?
If you have a memory card reader, use it to save the baseband patch via pc and then just apply it via xrecovery.
I'm sure this would work, try before reflashing rom.
Remember to backup just in case anything horrible happens.
Edit: when it says "unknown baseband" use dev tools-bad behaviour-crash system server. nd wait got reboot.
Sent from my X10i using XDA App

guys i have this ron in bb 54 (stock)... is it better on bb 52 and k010??? what does k010 will give me more than what i have now (stock kernel)??

Well..
I've tried a lot of times to do this rom run but no success...
Now i'm using another rom in .52 BB.
Thanks for help.

Related

Updating CM7

Probably been asked many times before but i could'nt find it. So sorry off the top.
How do i update cyanogenmod without deleting all my apps and settings?
Sent from my PC36100 using XDA Premium App
Just flash the newer zip in recovery.
So flashing the update keeps settings and apps in tact?
Sent from my PC36100 using XDA Premium App
Yes. Nandroid JIC. Wipe cache and dalvik and just flash over.
Sent from my PC36100 using XDA Premium App
Thanks a bunch fellas
After you flash the new CM zip, be sure to flash gapps (if you use it) and any other zips you've flashed. You won't lose your data (as long as you didn't wipe it), but you will lose any customizations that you flashed that write to /system (which would be most of them).
bkrodgers said:
After you flash the new CM zip, be sure to flash gapps (if you use it) and any other zips you've flashed. You won't lose your data (as long as you didn't wipe it), but you will lose any customizations that you flashed that write to /system (which would be most of them).
Click to expand...
Click to collapse
If you have already flashed gapps on an earlier version of CM and are just updating to a newer version of CM you do not have to flash gapps again. Just wipe cache and davlik and flash the update and kernel if you use a custom kernel and that's it.
disazter380 said:
Probably been asked many times before but i could'nt find it. So sorry off the top.
How do i update cyanogenmod without deleting all my apps and settings?
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Are you coming from a Sense based ROM?
oh btw this should have been post in the Q&A section
housry23 said:
If you have already flashed gapps on an earlier version of CM and are just updating to a newer version of CM you do not have to flash gapps again. Just wipe cache and davlik and flash the update and kernel if you use a custom kernel and that's it.
Click to expand...
Click to collapse
While this does work, there have been some builds that cause gapps to need to be reflashed. Flashing gapps everytime doesn't hurt.
Sent from my PC36100 using XDA App
Mr. Shroom here's the situation...
My current rom is cm 7.0.2. im trying to flash 7.0.2.1 and keep my apps and settings in tact. Im trying to do this via rom manager. A step by step guide would be greatly appreciated.
disazter380 said:
Mr. Shroom here's the situation...
My current rom is cm 7.0.2. im trying to flash 7.0.2.1 and keep my apps and settings in tact. Im trying to do this via rom manager. A step by step guide would be greatly appreciated.
Click to expand...
Click to collapse
Step 1: get rid of clockworkmod recovery (flash "alternate" Amon Ra using ROM manager)
Step 2: download 7.0.2.1 from one of the many mirrors
Step 3: (optional) move zip to root or folder such as 1roms
Step 4: reboot into recovery
Step 5: once in recovery make a nandroid backup
Step 6: flash new zip
Step 7: wipe cache and dalvic
Step 8: (optional) while in recovery go to other>fix apk uid mismatches
Step 9: Profit!
housry23 said:
If you have already flashed gapps on an earlier version of CM and are just updating to a newer version of CM you do not have to flash gapps again. Just wipe cache and davlik and flash the update and kernel if you use a custom kernel and that's it.
Click to expand...
Click to collapse
I've followed the steps you describe before, and I lost everything Google related -- my google contacts and calendars were gone. It wasn't an option to add it back until I re-flashed gapps.
simple. download 7.0.2.1.. wipe your cache.. make a backup if you desire..
and flash it.
no need to wipe your data if you're just upgrading CM
Got it done. Now i can go back to using my camcorder. Thanks for all the helpful replies.

[SOLVED] Defy can't get back to JB

See Page 4 for details on how I solved it.
In short I upgraded to BL7
OP:
Edit 30/1/2013 22:26GMT:
The current rom I am on (The Froyo mentioned below) has the following 'About Phone')
Kernel: [email protected]
Baseband: EPU93_U_00.59.01
BPflex version: UCAJRDNEMARAB1B80AA03A.0R
APflex version: GAS_EMEA_USAJRDNFRYORTCEE_P016
Build number: JOREM_U3_3.4.2_179-2
Hey all,
I'm stuck with my Defy (MB525 Red Lens).
I recently flashed an SBF which I then realised had a messed up CG version (too low or high or whatever)... I went to the AIO Defy Beginners guide as I remember seeing something there about this, and this is what I found.
Black Screens when booting up: (!) Tried to install a version of Android with a lower CG Version than the one currently on the phone.
Weird behavior after installing a Fixed SBF: Install a matching Nandroid backup with your SBF, and remember to clear Cache/Dalvik Cache using Recovery.
Installed full Gingerbread SBF and can’t go back to another rom: (!) aha! We have a issue here!, latest Stock Gingerbread full SBFs comes with a Version 5 of the CG, meaning until not long ago you were pretty much screwed. But wait, there is hope! A one kind Éclair has been found in China Defys that comes with Version 5 CG!.
How to fix it:
Method 1:
Download this SBF and Flash it
Root your Phone
Download 2nd Init 1.4.2 and Install ClockworkMod Recovery
Download and install this Nandroid Backup << File is Back, thanks Ichibanme again!>>
Enter Recovery, Wipe Data/Cache
After wiping, turn off your phone
Turn it on and get immediately into Bootloader mode
Flash this Fixed SBF
Delete Data/Cache again and reboot.
I used the first method.
I have completed these parts (So I'm now on Froyo - the second SBF), however I can't seem to upgrade to Jellybean anymore.
I tried following these instructions to install JB from FroYo again, but once I have it installed I just get a black screen with a red LED. It hangs there, then returns to the red M logo.
I've tried taking the battery out for 5 minutes, and leaving it on that screen, but no luck.
Currently I'm again at the FroYo ROM, which is working for me, but I want my Jellybean back
Can anyone help me please?​​
You has flashed GB kernel and cannot revert to Froyo. From now one you must use the fixed sbf and flash the nandroid backup. After that you can install CM10.
pgreed I tried installing this, but it didn't work (including the nandroid backup)
Current settings:
Edit 30/1/2013 22:26GMT:
The current rom I am on (The Froyo mentioned below) has the following 'About Phone')
Kernel: [email protected]
Baseband: EPU93_U_00.59.01
BPflex version: UCAJRDNEMARAB1B80AA03A.0R
APflex version: GAS_EMEA_USAJRDNFRYORTCEE_P016
Build number: JOREM_U3_3.4.2_179-2
Click to expand...
Click to collapse
Aim:
A functional (daily) Jelly Bean ROM!
Click to expand...
Click to collapse
First SBF I think I flashed: JRDNEM_U3_2.21.1_SIGNED_USAJRDNEMARAB1B8TMGB028.0R_USAJORDANTMGB_P030_A012_M001_HWp3_Service1FF.sbf.gz
Please help, anyone!
pk92 said:
Edit 30/1/2013 22:26GMT:
The current rom I am on (The Froyo mentioned below) has the following 'About Phone')
Kernel: [email protected]
Baseband: EPU93_U_00.59.01
BPflex version: UCAJRDNEMARAB1B80AA03A.0R
APflex version: GAS_EMEA_USAJRDNFRYORTCEE_P016
Build number: JOREM_U3_3.4.2_179-2
Hey all,
I'm stuck with my Defy (MB525 Red Lens).
I recently flashed an SBF which I then realised had a messed up CG version (too low or high or whatever)... I went to the AIO Defy Beginners guide as I remember seeing something there about this, and this is what I found.
I used the first method.
I have completed these parts (So I'm now on Froyo - the second SBF), however I can't seem to upgrade to Jellybean anymore.
I tried following these instructions to install JB from FroYo again, but once I have it installed I just get a black screen with a red LED. It hangs there, then returns to the red M logo.
I've tried taking the battery out for 5 minutes, and leaving it on that screen, but no luck.
Currently I'm again at the FroYo ROM, which is working for me, but I want my Jellybean back
Can anyone help me please?
Click to expand...
Click to collapse
Under method 2, there is info on how to install CM7. Use it to flash CM10.
Vicsa said:
Under method 2, there is info on how to install CM7. Use it to flash CM10.
Click to expand...
Click to collapse
Thanks for the reply.
"8. Flash this Fixed SBF"
What Fixed SBF (for CM10) should I use in place of this step?
Will "cm10Quarx.31.12+BM.tweaks.fixed.sbf" from this thread work?
pk92 said:
Thanks for the reply.
"8. Flash this Fixed SBF"
What Fixed SBF (for CM10) should I use in place of this step?
Will "cm10Quarx.31.12+BM.tweaks.fixed.sbf" from this thread work?
Click to expand...
Click to collapse
you misunderstood me. Don't use method 2, but info under that method on how to install CM7.
Vicsa said:
you misunderstood me. Don't use method 2, but info under that method on how to install CM7.
Click to expand...
Click to collapse
Ahh, so you meant
Root your Defy (Using SuperOneClick 1.7 and not 1.9).
Install SystemRecovery from GoAPK. If you install 2nd init, you'll just get into a boot loop and have to start over.
Reboot to recovery. Do a factory wipe, then do the cache wipe.
Install CM7 .Zip and then gapps zip file. DO NOT wipe again, you'll just go back to 2.2.2 CEE (if you accidentally do this, you can pick up again from step 3).
profit!
Click to expand...
Click to collapse
Alright, I'll see how that goes Thank you very much
Edit: The SystemRecovery from GoAPK link says it's outdated :S http://forum.xda-developers.com/showthread.php?t=875233
Will try EasyRecovery instead http://forum.xda-developers.com/showthread.php?t=1787541
pk92 said:
Ahh, so you meant
Alright, I'll see how that goes Thank you very much
Edit: The SystemRecovery from GoAPK link says it's outdated :S http://forum.xda-developers.com/showthread.php?t=875233
Will try EasyRecovery instead http://forum.xda-developers.com/showthread.php?t=1787541
Click to expand...
Click to collapse
ah man you are fast
Do not wipe after flashing cm10 and gapps (just before), if you manage to come that far.I think that's the key.
Vicsa said:
ah man you are fast
Do not wipe after flashing cm10 and gapps (just before), if you manage to come that far.I think that's the key.
Click to expand...
Click to collapse
OK What I did (from the rom with above specs):
Install EasyRecovery (Android Recovery 3e)
Wipe Data/Factory Reset
Wipe Cache
Install CM10 31st December 2012 build (CM10-20121231-NIGHTLY-mb526(last-in-2012))
Installed Gapps (gapps-jb-20121212-signed)
Reboot
Now I've got a bootloop between Red Motorola logo and Red LED with black screen :/
Going to try again from method 1, but install EasyRecovery instead of going to the second ROM
To do list:
Download this SBF and Flash it
Root your Defy (Using SuperOneClick 1.7 and not 1.9)
Install EasyRecovery from GoAPK.
Reboot to recovery. Do a factory wipe, then do the cache wipe.
Install CM10+Gapps
Reboot
Click to expand...
Click to collapse
Don't forget also to wipe dalvik cache before you flash a custom ROM (CM10)!
Vicsa said:
Don't forget also to wipe dalvik cache before you flash a custom ROM (CM10)!
Click to expand...
Click to collapse
But... you can't wipe dalvik with EasyRecovery :/
Options are:
reboot system now
apply update from sdcard [this one allows installation of cm10 zip]
wipe data/factory reset
wipe cache partition
Not worked by the way :/ now have the ECLAIR motorola logo...
I'm pretty sure that I couldn't install cm10 before wiping dalvik cache, coming from the stock ROM. I'd try that outdated system recovery. They didn't changed that step, so I think it should work.
Vicsa said:
I'm pretty sure that I couldn't install cm10 before wiping dalvik cache, coming from the stock ROM. I'd try that outdated system recovery. They didn't changed that step, so I think it should work.
Click to expand...
Click to collapse
Alright, I'll give it a go tomorrow. For now I'm going to sleep =P Only got 2 hours sleep last night wrestling with this!
Thank you very much for your help!
You're welcome. Hope it'll work. Good night.
Vicsa said:
You're welcome. Hope it'll work. Good night.
Click to expand...
Click to collapse
No luck :/ it had the white motorola logo (from Eclair) still.. I'll try going that route from the FroYo
Re: [Q] Defy can't get back to JB
Did you try format data to ext4 from boot menu in file system tools, you have to do it after flashing cm10
Also, for good measure you can try using the system wiper zip
Sent from my MB526 using xda premium
thekguy said:
Did you try format data to ext4 from boot menu in file system tools, you have to do it after flashing cm10
Also, for good measure you can try using the system wiper zip
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
I've tried the ext4 BEFORE flashing CM10... Damnit why didn't I try after =P haha.
I used a zip to wipe ext4 too... I'll give those a try, thanks
Try method 1 again, but use this newer version of 2nd init 2.0 instead of 1.4.3.
After that you could try this steps to install CM10 (copy/paste from FAQ):
For MB526 and PRE 2ndBoot Builds
1) Go to Custom Recovery.
2) Wipe data/factory reset, wipe cache and go to advanced ► Wipe dalvik.
3) Go to Install zip from sdcard ► Choose zip from sd card.
4) Flash gb Kernel (JUST FOR DEFY RED LENS USERS).
5) Flash CM10-20120924-NIGHTLY-mb526.zip.
6) Flash Gapps.
7) Flash Battery fix (only for red lens)
8) Wipe Cache and Dalvik again (recommended).
9) Restart.
Because you haven't suceed to install 2ndBoot release, try this one to see if it works.
You are a red lens user, so follow all the steps and see wat happens..
I've tried it with 2nd init v2.3, but I'll give 2.0 and those builds a go.
Thanks for helping. Really confusing me haha
Vicsa said:
Try method 1 again, but use this newer version of 2nd init 2.0 instead of 1.4.3.
After that you could try this steps to install CM10 (copy/paste from FAQ):
For MB526 and PRE 2ndBoot Builds
1) Go to Custom Recovery.
2) Wipe data/factory reset, wipe cache and go to advanced ► Wipe dalvik.
3) Go to Install zip from sdcard ► Choose zip from sd card.
4) Flash gb Kernel (JUST FOR DEFY RED LENS USERS).
5) Flash CM10-20120924-NIGHTLY-mb526.zip.
6) Flash Gapps.
7) Flash Battery fix (only for red lens)
8) Wipe Cache and Dalvik again (recommended).
9) Restart.
Because you haven't suceed to install 2ndBoot release, try this one to see if it works.
You are a red lens user, so follow all the steps and see wat happens..
Click to expand...
Click to collapse
OK, that's different.
Boot:
1) Red M logo
2) Blue LED
3) GREEN LED
4) Red M logo no LED
5) Bootloop
I think what I need is a CM10 nandroid to install with the CM10 zip :/

update from 4.1.1 to 4.3

HI
It is long time what I did rooted my defy+ and flash CM with android 4.1.1 (kernel 2.6.32-9)
I would like to update it with android 4.3 - http://forum.xda-developers.com/showthread.php?t=2385250
please, I am not sure with steps how to update, can some one post link with howto or write some steps. thank you very much
j.
First flash dual recovery (by prowzak in the dev section) then flash it and the minimal gapps (themes and apps section by TJKV). Please search.
Sent from my MB526 using xda app-developers app
jancici said:
HI
It is long time what I did rooted my defy+ and flash CM with android 4.1.1 (kernel 2.6.32-9)
Click to expand...
Click to collapse
Because you want to install the 4.3 is necessary to format data (do a factory reset) BEFORE! That can be done from TWRP or CWM.
Enjoy
pgreed said:
Because you want to install the 4.3 is necessary to format data (do a factory reset) BEFORE! That can be done from TWRP or CWM.
Enjoy
Click to expand...
Click to collapse
I updated last week without full wipe Only Cache + dalvik from ROM xperia D (android 4.1) without big problems ..
only some system xperia apps I must uninstall. For uninstalling I use Titanium backup pro.
Of course FULL WIPE is better !!!
thanks for answers
I am okay with full wipe.
so these could my steps:
1) download CM10.2 from mentioned link here : http://forum.xda-developers.com/showthread.php?t=2385250
2) download gapps
3) I don;t know what to do with downloaded files, put to microSD card which is in phone?
4) rebbot to recovery mode, I can do that by entering "about phone" -> "additional system updates" -> "recovery mode"
5) there are two option to wipe a) wipe data/factory reset b) wipe cache partition, so I will do option a)
6) there are two option a) update from sdcard b) install zip from sdcard. whic one?
thanks for help
jancici said:
thanks for answers
I am okay with full wipe.
so these could my steps:
1) download CM10.2 from mentioned link here : http://forum.xda-developers.com/showthread.php?t=2385250
2) download gapps
3) I don;t know what to do with downloaded files, put to microSD card which is in phone?
4) rebbot to recovery mode, I can do that by entering "about phone" -> "additional system updates" -> "recovery mode"
5) there are two option to wipe a) wipe data/factory reset b) wipe cache partition, so I will do option a)
6) there are two option a) update from sdcard b) install zip from sdcard. whic one?
thanks for help
Click to expand...
Click to collapse
Put the custom ROM and gapps (for CM 4.3 !!!) on the sd. Do a factory reset, wipe cache and dalvik, install zip from sdcard (ROM and next gapps) wipe cache and dalvik. Reboot. Enjoy
thanks for help and confirmation of my steps
I am using CM10.2 now on my defy+
jancici said:
HI
It is long time what I did rooted my defy+ and flash CM with android 4.1.1 (kernel 2.6.32-9)
I would like to update it with android 4.3 - http://forum.xda-developers.com/showthread.php?t=2385250
please, I am not sure with steps how to update, can some one post link with howto or write some steps. thank you very much
j.
Click to expand...
Click to collapse
Hi, you should at first update to latest nightly 4.1.2 in order to upgrade the recovery and then move to 4.3, both wiping data and cache before flashing each ROM.
1) Download latest 4.1.2 and 4.3 ( you find link to them in the OP posts of the rispective threads )
2) wipe cache/dalvik.
3) flash latest 4.1.2.
4) wipe cache/dalvik.
5) flash 4.3.
6) wipe cache/dalvik.
7) Reboot.
A better solution would be to wipe also "/data" (and /system) in step 4 using " defy ultimate wipe ":
http://forum.xda-developers.com/showthread.php?t=1818520.
So it would be:
1) Download latest 4.1.2 and 4.3 and defy ultimate wipe.
2) Reboot
3) Wipe cache/dalvik.
4) Flash latest 4.1.2.
5) wipe cache/dalvik.
6) Reboot
7) Reboot
7) Wipe everything (/system /data /cache /dalvik_cache) defy ultimate wipe ( DO NOT REBOOT BEFORE doing the next step )
8) Flash 4.3.
9) wipe cache/dalvik.
10) Reboot.
jancici said:
HI
It is long time what I did rooted my defy+ and flash CM with android 4.1.1 (kernel 2.6.32-9)
I would like to update it with android 4.3 - http://forum.xda-developers.com/showthread.php?t=2385250
please, I am not sure with steps how to update, can some one post link with howto or write some steps. thank you very much
j.
Click to expand...
Click to collapse
Got to say that I try using CM10.1 & CM10.2 in the last week,
I got the same device asyou and to tell the truth, the CM10 (android 4.1.1) is the best for our defy's!
works good, no crashes or any other problems...
If you still think of trying it - go to youtube and look for- defy install cm 10.2
take a look at some of the videos.. it will assist you.
good luck!
thanks for replys
I am using CM10.2 vor few days now, and quite satisfied.
jancici said:
thanks for replys
I am using CM10.2 vor few days now, and quite satisfied.
Click to expand...
Click to collapse
Which version of rom u r using?
Which gapps u used?
Give d link plz
cm10
jountha said:
Which version of rom u r using?
Which gapps u used?
Give d link plz
cm10
Click to expand...
Click to collapse
Minimal gapps on TJKV's thread, couldn't you see the OP? http://d-h.st/fTT

problem after installing cm10.2

hello everybody
im kinda new her so be cool with me
i'v just installed cm10.2 latest version on my nexus 4 4.3 ver, and i'v restarted the phone, and after he worked properly and smoothly before that restart, he writes me "Unforrtunetly, System UI has stopped." after i click OK another one comes and over and over..
iv installed the latest cm nightly version, i realy need ur help!
noamp0 said:
hello everybody
im kinda new her so be cool with me
i'v just installed cm10.2 latest version on my nexus 4 4.3 ver, and i'v restarted the phone, and after he worked properly and smoothly before that restart, he writes me "Unforrtunetly, System UI has stopped." after i click OK another one comes and over and over..
iv installed the latest cm nightly version, i realy need ur help!
Click to expand...
Click to collapse
Did you wipe data/factory reset in recovery before you flashed the rom?
22sl22 said:
Did you wipe data/factory reset in recovery before you flashed the rom?
Click to expand...
Click to collapse
yea of course!
perhaps i should meantion that in the guide it says that this part of wipeing data should take time but at my case id didnt pass the 30 sec..
noamp0 said:
yea of course!
perhaps i should meantion that in the guide it says that this part of wipeing data should take time but at my case id didnt pass the 30 sec..
Click to expand...
Click to collapse
Wiping data shouldn't take long at all. When people say wipe data/factory reset when changing roms it doesn't mean wipe the whole sd card. Do you have the latest recovery version? For CWM it is 6.0.3.6 or 6.0.3.7. For TWRP it is 2.6.3.0
The correct procedure is:
Wipe data/factory reset (NOT sd card)
Wipe cache/dalvik cache
Install Rom
Install Gapps
Install SU (optional)
Reboot
22sl22 said:
Wiping data shouldn't take long at all. When people say wipe data/factory reset when changing roms it doesn't mean wipe the whole sd card. Do you have the latest recovery version? For CWM it is 6.0.3.6 or 6.0.3.7. For TWRP it is 2.6.3.0
The correct procedure is:
Wipe data/factory reset (NOT sd card)
Wipe cache/dalvik cache
Install Rom
Install Gapps
Install SU (optional)
Reboot
Click to expand...
Click to collapse
yeah i have the CWN 6.0.3.6 version, and i did it all according to this procedure except the dalvik cache wipeing and that SU? (what is it exacly)?
u think i should do this all over again? maybe it will fix somthing... also ive notice that a new cm version (20130922) is out and mine is 20130921..
what are u saying? i would prefer not to do it cuz iv already manged all my apps and settings on the phone
noamp0 said:
yeah i have the CWN 6.0.3.6 version, and i did it all according to this procedure except the dalvik cache wipeing and that SU? (what is it exacly)?
u think i should do this all over again? maybe it will fix somthing... also ive notice that a new cm version (20130922) is out and mine is 20130921..
what are u saying? i would prefer not to do it cuz iv already manged all my apps and settings on the phone
Click to expand...
Click to collapse
Redownload the ROM. Once you've downloaded just install it and wipe cache and dalvik and it should be fine.
Su, in full, Super SU is root made by Chainfire. The normal one in cm is made by Koush but you don't need to flash the Chainfire one, only do that if you have root problems
Sent from my Nexus 4
22sl22 said:
Redownload the ROM. Once you've downloaded just install it and wipe cache and dalvik and it should be fine.
Su, in full, Super SU is root made by Chainfire. The normal one in cm is made by Koush but you don't need to flash the Chainfire one, only do that if you have root problems
Sent from my Nexus 4
Click to expand...
Click to collapse
i dont have any root problems so that fine, and ill try this and edit!
EDIT: it didnt work.. iv installed the new CM ver and after deleted cache and dalvik as u sayd and still not working properly..
U should flash stock rom, after that flash your cm rom again,your issue will be solve. Good luck.
Sent from phone's neighbor wife at dreaming place
bbanana said:
U should flash stock rom, after that flash your cm rom again,your issue will be solve. Good luck.
Sent from phone's neighbor wife at dreaming place
Click to expand...
Click to collapse
r u sure it will solve it? or can i try another thing as last resort before i wipe all/?
EDIT: and another thing, if u can give a link to the stock rom ill be glad!
i realy need ur help, im realy stuck here..
i tryed wipe all and istall the new CM ver and still not working..
how do i flash that stock rom??

Error flashing miui 7 rom

Hey there.So, I tried installing Miui 7 (weekly updated one) after following the steps accurately,but it says,failed to extract dir from system to system.I tried running it from both internal storage and external,and re-downloading it,but to no avail. Help please ?Oh, and I was running ED300's cm12.1 update 8 (now on update 10,which actually sucks very much)
MASK10101012 said:
Hey there.So, I tried installing Miui 7 (weekly updated one) after following the steps accurately,but it says,failed to extract dir from system to system.I tried running it from both internal storage and external,and re-downloading it,but to no avail. Help please ?Oh, and I was running ED300's cm12.1 update 8 (now on update 10,which actually sucks very much)
Click to expand...
Click to collapse
Reboot to recovery>>wipe system, data, cache, dalvik cache>>install zip>>select MIUI zip>>reboot
Note: Sometimes, the MIUI rom shows error at first time. So again select install zip and select the MIUI zip, without rebooting.
sasukay said:
Reboot to recovery>>wipe system, data, cache, dalvik cache>>install zip>>select MIUI zip>>reboot
Note: Sometimes, the MIUI rom shows error at first time. So again select install zip and select the MIUI zip, without rebooting.
Click to expand...
Click to collapse
I didn't reboot at all,did it just like above ^^
MASK10101012 said:
Hey there.So, I tried installing Miui 7 (weekly updated one) after following the steps accurately,but it says,failed to extract dir from system to system.I tried running it from both internal storage and external,and re-downloading it,but to no avail. Help please ?Oh, and I was running ED300's cm12.1 update 8 (now on update 10,which actually sucks very much)
Click to expand...
Click to collapse
Try to flash stock rom first then flash miui rom.
Hope this help
MASK10101012 said:
I didn't reboot at all,did it just like above ^^
Click to expand...
Click to collapse
Okay, so try this, reboot into recovery, wipe the directories, then choose reboot to recovery from reboot option....then flash the MIUI zip
I have same problem tomorrow.
I have same problem tomorrow when I was flashing ASUS ZenFone UI Rom.It was get error7 so I will try twrp 3 new version.But no effect then I will again flashed my old twrp and then flash it's work for me.
I were wipe cache only....(do not full wipe,system,data,internal former)
I hope this method is work.
sasukay said:
Okay, so try this, reboot into recovery, wipe the directories, then choose reboot to recovery from reboot option....then flash the MIUI zip
Click to expand...
Click to collapse
Okay so I need more help. I think I'll also be flashing phantom kernel.after installing miui. Haven't started yet but will soon. The problem is that I'm a complete noob with kernels. So... What are the things I'm gonna have to do ? CM12.1 just keeps getting worse with each update .??
MASK10101012 said:
Okay so I need more help. I think I'll also be flashing phantom kernel.after installing miui. Haven't started yet but will soon. The problem is that I'm a complete noob with kernels. So... What are the things I'm gonna have to do ? CM12.1 just keeps getting worse with each update .����
Click to expand...
Click to collapse
Just download the zip and flash it. And set the settings as mentioned in the phantom kernel post using Kernl Adiutor app.
sasukay said:
Just download the zip and flash it. And set the settings as mentioned in the phantom kernel post using Kernl Adiutor app.
Click to expand...
Click to collapse
OK I'll start soon. I hope I have no probs.. Thanks!

Categories

Resources