Related
I have HTC HD2,I was trying to upgrade to Android, I think I made a mistake I installed “MAGLDR113” before upgrading my Radio to version 2.15.50.14. After I installed MAGLDR113 I connected my phone to my computer and the telephone was stuck in boot mode and was never able to see USB connection. Now my computer does not recognize my phone anymore and I can’t flash a new Radio version since I have no connectivity to my computer. I tried several things but all was useless. Can anyone help me telling me how I can have a USB connection to my computer??
Thank you.
do you have tried to start and hold volume button... than connect to usb and simply install a stock rom (for example from your provider) - this must work... if not - you have bigger problem.
muhanad said:
I have HTC HD2,I was trying to upgrade to Android, I think I made a mistake I installed “MAGLDR113” before upgrading my Radio to version 2.15.50.14. After I installed MAGLDR113 I connected my phone to my computer and the telephone was stuck in boot mode and was never able to see USB connection. Now my computer does not recognize my phone anymore and I can’t flash a new Radio version since I have no connectivity to my computer. I tried several things but all was useless. Can anyone help me telling me how I can have a USB connection to my computer??
Thank you.
Click to expand...
Click to collapse
Answered so many times. turn your phone off then turn it on "while holding volume down.It will then take to bootloader(rainbow screen).It suppose to have a cotulla written above the rainbow screen.Now flash it with a stock rom came from HTC site..No need to sync your phone to your PC..Just flash it..Start all over again..Now you can search before doing somehing with your phone.If that didn't help you. You have a bigger problem..
Yes I tried this also but it doesn't work.
What didn't work? Can you boot into bootloader - ie switch off, press and hold vol down button and switch phone on.
You should then boot into a multi-coloured screen and should see "serial" at the bottom of the screen.Then connect device to usb port (preferably one at back of your pc and a different one that you haven't used before if possible) - let the drivers install if applicable - does "serial" change to "usb"?
Do wat d above posters have suggested then try different usb ports or even a different windows pc...For all we know, your usb cable might be faulty....Also did u perform HARDSPL before anything else?
I've started experiencing this very same thing. HD2 wont regognize usb connection while in bootloader screen. I get the usb connection sound but never says usb at bottom of screen like it used to. I've been trying android builds via sd but wanted to try my first flash but cant even instal MAGLDR cos it just fails at bootloader cos of no connection. Has been driving me wild for 3 days now.
try plugging the phone into a different USB port it should work then...
Tried that all day and it said couldn't install drivers, then just tried the same ports now and its worked. I think it was mobile device center had 2 set-ups for my phone, i deleted the older one and all seems fine now.
This is crazy, now i'm stuck on magldr and won't find usb.
I'm leaving nand now cos i'm close to smashing my phone to pieces, magldr usb flasher will not find the connection no matter what i try, so i'm staying with ****ty windows mobile. Not happy but i've been trying for days now.
Smoke74 said:
I've started experiencing this very same thing. HD2 wont regognize usb connection while in bootloader screen. I get the usb connection sound but never says usb at bottom of screen like it used to. I've been trying android builds via sd but wanted to try my first flash but cant even instal MAGLDR cos it just fails at bootloader cos of no connection. Has been driving me wild for 3 days now.
Click to expand...
Click to collapse
I am experiencing this exact same problem. Bootloader wont recognize the USB stays in SERIAL. Tried different ports, cord is fine. What is the problem.
Before this, my HTC HD2 would just hard reset on its own ONCE A DAY! Why was it doing this?
Now it gets stuck on the white HTC loading screen. Wont get passed it. I used to be able to hard reset by doing the volume keys down and reset but NOPE... still wont load past that white screen.
HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Have you guys tried deleting the drivers using a utility like USBDeview? Try deleting anything that relates to HTC OR HD2, replug the phone in, re-install the drivers.
h.nocturna said:
Have you guys tried deleting the drivers using a utility like USBDeview? Try deleting anything that relates to HTC OR HD2, replug the phone in, re-install the drivers.
Click to expand...
Click to collapse
IDK what USBDeview is.
Im in Safemode so no drivers load up... because it didnt work in Normal mode. Still nothing
taha23 said:
IDK what USBDeview is.
Im in Safemode so no drivers load up... because it didnt work in Normal mode. Still nothing
Click to expand...
Click to collapse
Of course it won't work without drivers. The computer needs drivers to communicate with the phone. In normal mode, unplug the phone, Google the application, download it, open it, click everything that has HTC or HD2 in it and click uninstall. Plug the phone in, let the drivers install themselves again. Try again.
h.nocturna said:
Of course it won't work without drivers. The computer needs drivers to communicate with the phone. In normal mode, unplug the phone, Google the application, download it, open it, click everything that has HTC or HD2 in it and click uninstall. Plug the phone in, let the drivers install themselves again. Try again.
Click to expand...
Click to collapse
Ok... i rebooted into Normal mode, downloaded the utility, did a search for "HTC" found nothing, did a search for "HD" found nothing. So i am now installing windows mobile center for windows 7 which should have the appropriate drivers.
Install Windows mobile device center 6.1, problem solved.
Sent from my HTC HD2 using XDA Premium App
I'm able to view through USBDeview that my HD2 is connected, however I'm unable to view/open it.. I screwed up by naming the 'temp' folder to 'copy_to_sd_root'..
The instructions confused me. I figured this was the folder that needed to be copied to the sd root... however when i rebooted the phone, I was unable to access it. Any recommendations?
SOLVED
I was overlooking the USB Flash option.
If you are still having problems, let your phone turn on(no multi-color screen), select: USB Flash, click the DAF.exe installation file, follow the prompts.
You're done.
I had this problem and I solved it disabling an option in activesync. I can't remember what was exactly the checkbox, but was in "options" and it said something like "allow usb connections" or something like this.
I just disabled it and rebooted the device holding volume down.
Good luck!
Make Sure Phone is not connected to PC
Goto cotrol panel in windows
Uninstall HTC BMP USB Driver
Uninstall HTC Driver Installer
Uninstall HTC Sync
Unisntall Windows Mobile Device Center
Restart the PC
start the phone holding power and vol dn and now connect the phone to PC. should detect and install the drivers and you should be able to see USB on phone screen.
if this does not work
Delete all the USB root HUB but keep as last option in device manager.
PS: This will cause ALL the USB devices to redetect.
Let me know if this works
Hi,
looked for an answer to this problem in the forum but didn't find it, i have a stock xperia play, sim free running gingerbread 2.3.2 and i'm based in the uk and have a uk handset. My problem is although i am offered the 2.3.3 update, when i try to get it i get stuck at the preparing phone stage on pc companion software, the phone switches off then the software tells me to disconnect USB cable from pc and phone, then it tells me to check battery power level(phone is off?) is at least 50% (it is 80%)then says turn the phone off? leave for 5 seconds then plug back in whilst holding the back hardware button. After this the computer does 3 beeps (normally error noise) and i have to do this all again, don't see anyone else having problems updating? your help would be greatly appreciated.
Use SUSE! Should work just fine.
USe another computer if it doesn't work
and yes try http://www.sonyericsson.com/cws/sup...etailed/updateservice/xperia-play?cc=gb&lc=en
Before asking for help
i have narrowed it down to the computer not recognising the phone when it is off(blue light mode) i looked at device manager, says there is no driver for S1boot fastboot?
driver are on program files > sony ericsson > pc companion > driver 32/64bit
check there and install them manually
or check the pc companion in sony ericsson menu on your phone and connect your phone and press install
then install pc companion and let it do his work installing the driver.
check my mtpapp thread if you need more detail
don't clear mtpapp (your apps should be ok btw)
Tried everything now, still nothing happens after i plug in usb cable whilst holding the back button, what is actually supposed to happen after this point, i get the blue light, nothing else.
rojach said:
Tried everything now, still nothing happens after i plug in usb cable whilst holding the back button, what is actually supposed to happen after this point, i get the blue light, nothing else.
Click to expand...
Click to collapse
When the light goes blue, you are connected in either bootloader or recovery mode. If your device is not detected, go to device manager and install the drivers manually
Sorry double post
Are you connecting the phone via a USB hub?
If you have many usb ports on your pc being used, try to disconnect a few and plug the phone directly to your pc.
I had this same issue and it happened because my stupid logitech keyboard keeps messing with my usb drivers everytime i plug in a new USB device.
I unplugged the keyboard and the update went swiftly.
In order to enter flash mode, you ought to:
1)switch off the phone
2)remove the SIM card and sdcard (this is mandatory!),
3)remove the battery for 5 seconds, then put it on.
4)hold the Back button while you connect the device.
The device will shine with a green light. The blue light is used for the Fastboot mode, and you get that light if you:
1) Switch off the device
2) Hold the Search button (the magnifying glass one)
3) connect the device to the USB cable.
Hi all, thanks for your help but still no luck, i have tried all of the above on 2 computers, the same problem occurs, not sure what is supposed to happen when i plug the USB into the phone whilst holding the back button during update? all i get is a blue light on the phones power button. Nothing appears on the pc either??? i have done a full factory reset and tried installing drivers, is there a specific driver for entering the recovery mode on xperia play?
Sony Update Issues
http://unlockbootloader.sonyericsson.com/instructions
Note: We have seen in some forums that customers unlocking the boot loader on their phones have experienced problems when they accept a FOTA (Firmware upgrade Over The Air) update. The issue has been reproduced and we are working on a solution. For customers that have unlocked the boot loader please do not accept the Firmware upgrade OTA.
i CAN't connect it with my pc and rsd lite can't detect my phone when i plugged it in!
also, i can't charge it via PC nor the power supply(i have tried using moto's one and a unofficial power supply)
but the most wired thing is i can charge it via an"portable battery"
maybe it is an hardware problem and i can't flash back to my official sbf
warranty is now void?
or can i flash a SBF without connect to PC?
give me a now hope plz
Have you tried the boot loader mode (forum.xda-developers.com/wiki/index.php?title=Motorola_Defy):
---------------------------------
How to get rsdlite to recognise a phone that won't boot
You flashed, something happened, now screen is black, phone doesn't react, u are in a boot loop, rsdlite cant recognize the phone. you're right here.
To get RSDLIte to recognize your phone you have to enter boot loader mode. this means press VOL-UP + POWER If nothing helps, try pushing VOL UP before!' you put the battery in (RSDLIte should be running and awaiting a new connection at that time) If you are using Windows 7, try seting RSDLite to "compatibility mode: Windows XP SP3".
i have tested the connection in bootmenu and RSDLITE not able to recognize my phone
any ideas?
Hello
Please somebody help me. My notebook doesn't recognise my DEFY via USB. More details: When I got the phone it worked but after a while not always. Sometimes it connected 5 minutes later but nowadays doesn't work at all. By the power charger it's charging normally.
When it's plugged to the computer, the phone's screen lights up, but doesn't connect or charge. If I tick on/off meanwhile the USB debug, the USB sign shows up but it's still not charging or connecting. (I've already tried all 4 options)
Moreover when I remove the USB cable, the USB signal doesn't disappear until I restart the phone or abort the USB in the application manager.
I've already tried to install or uninstall the driver (Moto Helper) but didn't help.
The main problem is that if I connect the phone to the notebook, the device manager doesn't see it. (I tried different computers, Win XP and Win 7)
I did a factory reset several times but nothing happened.
I think there was an automatic software update and maybe the problem started at this time.
This is my first Android phone and I'm not an expert so I really need your help.
I wanted to install a new ROM but the RSD lite doesn't see the phone neither in Bootloader mode. It says: "Connect USB Data Cable" and when I connect it says: "USB" so recognises something.
I'm trying to fix it for weeks but I can't find to solution.
System version: 34.177.3.MB525.Retail.en.GB
Build no: JOREM_U3_3.4.2_177-3
Win7 x64
Sorry about my English and thank you for your help.
I didn't mean bootmenu tommy, BOOTLOADER MODDE: press VOL-UP + POWER, try pushing VOL UP before! to get RSDLIte to recognize your phone(RSDLIte should be running and awaiting a new connection at that time)
---------- Post added at 09:52 PM ---------- Previous post was at 09:42 PM ----------
Hey poross, I guess that your problem seems like a virus activity or maybe a faulty USB cable. Try another USB cable and another PC (with a good antivirus running, indeed!). Before connecting to the new PC, reset your defy...
I just hope it helps. If not, maybe your defy has a hardware problem...
If you are using windows 7 make sure that you installed good drivers for system x86/x64. I'm using RSD on Windows 7 X64 and I have no problems with it. Check in device manager for some unknown devices after plug phone to USB. If system wont see any new device after plugging it wont be driver problem but something wrong with phone, usb cable or usb port. Even if driver fails system should see the phone like unknown device or something.
MMarv said:
I didn't mean bootmenu tommy, BOOTLOADER MODDE: press VOL-UP + POWER, try pushing VOL UP before! to get RSDLIte to recognize your phone(RSDLIte should be running and awaiting a new connection at that time)
---------- Post added at 09:52 PM ---------- Previous post was at 09:42 PM ----------
Hey poross, I guess that your problem seems like a virus activity or maybe a faulty USB cable. Try another USB cable and another PC (with a good antivirus running, indeed!). Before connecting to the new PC, reset your defy...
I just hope it helps. If not, maybe your defy has a hardware problem...
Click to expand...
Click to collapse
actually,i am in bootloader(versoin 9.10) and rsdlite still not able to detect my phone =..=
but i notice that when i plugged it in,the phone showed "transfer mode USB"
but nothing happened in rsdlite,no info of device properties.....
what the hell.....
To tommy:
Let's make a conclusion:
1-You have the correct drivers but RSDLite doesn't recognize your phone even in the bootloader mode
2-The charger can't charge your battery
3-The portable battery CAN charge it! (So the phone connector has no problem)
So: It is most likely that you've got a faulty usb cable
Thanks for dealing with my problem
Chamelleon: The device manager doesn't see anything while the cable is plugged but the phone detects something -probably the USB power- but doesn't connect at all. It happpens in the bootloader mode as well so detects the USB cable but it seems that the phone doesn't send sign to the computer. I haven't had any problem with USB detection, connection (except this phone) for a long time.
MMarv: You mean there's a virus on the phone? if it's the situation, installing a virusbuster to the phone could solve it? Which one is a good prog?
I tried with 3 different cables and still not working. With the wall plug charger and the car's USB socket are ok but none of them charges from the notebook.
poross said:
Thanks for dealing with my problem
Chamelleon: The device manager doesn't see anything while the cable is plugged but the phone detects something -probably the USB power- but doesn't connect at all. It happpens in the bootloader mode as well so detects the USB cable but it seems that the phone doesn't send sign to the computer. I haven't had any problem with USB detection, connection (except this phone) for a long time.
MMarv: You mean there's a virus on the phone? if it's the situation, installing a virusbuster to the phone could solve it? Which one is a good prog?
Click to expand...
Click to collapse
I mean Virus on your laptop. Hard reset your phone and try another PC with a good anti-virus installed!
So if cable is ok, usb port in pc and phone is ok it must be driver problem. Delete all what appears as Motorola driver including drivers from system32 and then install it again. You can also try to install it on different PC with 32 bit system. Do not install any unknown drivers, just install Motorola Media Link or Motorola Software Update cause if you have this one and some different it can be problem. Or you just have something wrong with system. First try on different pc with drivers from MML or MSU.
Succeeded.
The solution was incredibly simple. It was strange when I did a factory reset (4 times) and rebooted the phone it restored my acccounts, shortcuts, settings. I ticked off two things: settings/Privacy/Back up my data and Automatic restore. Then took out battery then I put it back and began the reset. After it the phone forgot really everything of my details and now the USB is working perfectly.
MMarv said:
To tommy:
Let's make a conclusion:
1-You have the correct drivers but RSDLite doesn't recognize your phone even in the bootloader mode
2-The charger can't charge your battery
3-The portable battery CAN charge it! (So the phone connector has no problem)
So: It is most likely that you've got a faulty usb cable
Click to expand...
Click to collapse
i tried another usb cable,but it still not able to connect.....
poross said:
Succeeded.
The solution was incredibly simple. It was strange when I did a factory reset (4 times) and rebooted the phone it restored my acccounts, shortcuts, settings. I ticked off two things: settings/Privacy/Back up my data and Automatic restore. Then took out battery then I put it back and began the reset. After it the phone forgot really everything of my details and now the USB is working perfectly.
Click to expand...
Click to collapse
not working for me =..=
however,i have 2ndinit installed
and after factory reset,the phone is still rooted and 2ndinit still here
so will it cause any problem?
Hey Tommy,
I nearly bricked my defy, and the battery was low too. RSDite not able to recognize it. It seemed that charger can't charge the battery either. But I was wrong. The charger was actually charging the battery. I removed the back cover with the charger connected and the battery in place. I tested the two outer connectors of the battery with a voltmeter (when the battery is in place, they are slightly exposed). Initially the voltage was about 3 volts and steadily increased... Test it if you can. If it is not charging, I bet that it is a phone connector problem. You should return it and I think they can repair it easily...
Hi Tommy1994
First I'm not an expert, this is my first android phone.
My probelm was (I think) an android error. I made factory reset 4 times but it always restored my details. (It's not a perfect FR). After it I did a bit different FR:
-1. in the normal android/ settings menu/Privacy/Back up my data -thick off. So it won't make any backup
-2. swich off the phone
-3. take the battery out for 30sec then put back
-4. press the volume down and hold it while you press the power on button but hold the volume down for more 4 sec. you will see an android robot with an exclamation mark.
-5. press the volume up and down together that's how you enter to the Recovery menu.
-6. first chose the "Wipe cache partition" (you can move with the volume buttons and select with the power button) -wait till "Cache wipe complete"
-7. then chose the "Wipe data/factory reset" - wait till "Data wipe complete"
-8. after these chose the "Reboot system now"
-9. if your phone doesn't want to start just get the battery out for 30sec and take back.
note: you will lose everything of your personal details, installed apps...
note2: it's my FROYO's (android 2.2.2) menu probably yours is different
Sorry for my English, hope you understand though.
hope this helps
If your are trying to connect on windows vista or 7 I think you must be loged on as admin of the computer. I had same problem but when I used windows XP it worked fine this is for rsd lite
going to try ,i really hope it will help
thx
i have flashed cm7 and still not able to connect it to PC
i am quite sure it is not software problem, maybe it is about the USB cable?
is that possible the USB cable can charge but not able to transfer data?
hi tommy1994 ,
i'm having the same problem as you, when i'm in the bootloader screen the rds lite program don't find my defy...
have you found any solution?
Thank you very much
Hey guys I need some help.
My Defy Screen is broken but I have to connect my phone via USB to my pc.
So I need your help to navigate through the Clockwork till I go to USB storage mode(it was something like this)
So you need to tell me which buttons i have to press how many times till I get to extras/advanced and then USB storage mode.
Steveletack said:
Hey guys I need some help.
My Defy Screen is broken but I have to connect my phone via USB to my pc.
So I need your help to navigate through the Clockwork till I go to USB storage mode(it was something like this)
So you need to tell me which buttons i have to press how many times till I get to extras/advanced and then USB storage mode.
Click to expand...
Click to collapse
The step that you are opting for is not advisable as you can end bricking your device.
I assume you have to copy files of your device to pc or vice versa. I would suggest doing it the simpler way by removing your sdcard and connect it to your system through a card reader.
My device is already broken and i currently dont have a SDcard converter
Please tell me the steps I know what im doing.
* On blue led volume down (easy part )
* Volume down 4x - confirm with power button
* Volume down 2x - dito
And lets hope that we have the same bootmenu
Hello
Please forgive me my English, it;s not my everyday language. I hope I will write everything clear, if not please tell me.
I had already read many tutorials, topics in some similiar situation but I cannot find any working for me information.
I have bought Nexus with crashed system. I could only get into recovery or bootloader, but system cannot start (it stops on google logo). It has got TWRP bootloader. I tried to mount/install there some another kind of bootloader (newer) by the flashtool and then try to start the system but it wont work. After that I just thought about connect an USB-OTG adapter and try to install system from it. Turned off the tablet and just go to shop for OTG-adapter. When I came back with new cable my tablet won;t start anymore.
What I have already tried:
- charging for more then 20 hours (charger 2.1A, 5V)
- unplug baterry for about 10 minutes
Both of this solutions wont work for me. Everytime I try to turn it on I'm pushing buttons "Power" and "vol+" or "vol-". Both or not both, or only "power"- Nothing.
When I connect it to PC I'm getting an notification "Unknown USB device", and it is not visible by abd or fastboot. Is it normal? It has some kind of... live in itself.
Please tell me some suggestions what can I do more, or something.
Thank You in advance.
Answer
Well,if it reconize by the PC and you can see the file in it, you can use it as a USB (That's a good option because mobile device always has faster transfer speed)
And sorry w/my vocabulary mistake .I am from Viet Nam