I have flashed CM7 Nightly #71. Post flash the Input buttons on the phone stopped glowing. Reboot does not help. Even boot time the input buttons are not initialised.
Any solution ?
Edit : Well played with Display setting -- With Screen brightness set to auto mode, input buttons behave normally, but take a while to glow once you unlock the screen. Well I am using brighness widget button in the power widget to change the brightness.
Edit : Well after playing multiple time now it behave normally across all brightness settings in the widget. I shall trying reboot and check if it initialises during boot time and post reboot behavior.
Edit : Input button don't initialise during boot. 25-30% brightness setting when changed to Auto brightness, Input buttons started glowing normally.
Is this a bug or input button are supposed to behave in this fashion ?
http://review.cyanogenmod.com/#change,5239
That commit messed it all up.
It remains lit for me all the time - but, your comment on the commit explains it all.
I am on #83 with new kernal flashed. Input button issue still remains. It does not come on for some settings while toggling battery settings in power widget notification.
I have installed miui camera from kevin2516. Sometimes camera sound goes after clicking few times. Along with camera sound, all sounds of the phone go off even calls. Only reboot resolves this?
Any solutions please?
The Sound Off issue is a known bug. It was *probably* solved in CM7 Stable versions, not sure though.
Move from #71 to #83 feel voice clarity during the call is reduced inspite of 4 bar full signal indication.
Feedback ---- #83 with new kernel, miui camera error with complete sound off couple if times
Related
For some reason my device has suddenly started switching to the minimum backlight setting whenever it's switched on. If I go to the backlight settings and then adjust the slider it will stay at the selected brightness until it switches off. When it switches back on again it's at minimum brightness and I can hardly see the screen!
This started happening after I installed and then removed PocketZenPhone.
I don't really want to hard-reset the device unless I absolutely have to - does anyone know what registry key sets the default switch-on brightness?
Thanks,
I dont have the solution but I have had the same problem intermittently. Can be really aggravating in the dark because it can be hard to get to the proper screen to increase the backlight. Hasnt happened in a while. Have not been able to figure out what triggers it. Have not installed PocketZenPHone. Curious if anyone has an explanation.
yah, i've noticed this to, sometimes i'll hit the power button to take it off standby and the backlight would be off. first couple of times it scared the hell out of me cuz i thought the screen had broke or burnt out.
also i noticed the version of spb pocket plus i'm using (3.04 build 4195) doesnt adjust the backlight brightness.
Now that you mention it. the SPB Pocket plus backlight does not work for me either. Strange...
Well I think I've managed to "fix" this by setting the following;
Backlight Settings:
On battery power, turn off backlight if device is not used for [5 min]
Turn on backlight when a button is pressed or the screen is tapped
Power Settings
On battery power: Turn off device if not used for [3 minutes]
I think the key thing here is to have the device auto-switch-off BEFORE the backlight timer kicks in. Since setting the above three settings I have not had the same problem again.
Ill give it a try as well.
Hmm...maybe someone can help me. One day, my backlight timer settings when the PDA's not plugged in reset to 10 seconds (in the registry it has it as 7 seconds). I'll go in and change it to 2 minutes (the original setting I had it at), but the minute I turn it off, it resets back again to the 10 seconds setting. I even tried going into the registry and changing it, and it resets it back to 10 seconds. I suspect it may have something to do with an entry in the "scheduled tasks" but it looks like a complete mess. Is there some kind of scheduled tasks cleanup utility?
Thanks,
Q
hello i have the same problem using phothet with WM6
Thanks
Nicolas
I had the same problem often about 15 months ago - it happened often each day.
I posted herw but had no joy with a solution - but then found one on Modoco (i was looking about March/April 2006).
Even with that - it has still done if perhaps five or six times since - and basically makes the phone unusuable if it happens somewhere or time with poor light.
My KJam backlight keeps changing by itself to dark
Suddenly my KJam backlight always turns to low without me doing so, then I have to change it to high, barely can see what I’m doing as it is almost black. This is kept happening especially after I installed Pocketweather. I reinstalled the Rom, it worked fine then suddenly it is back again when I switch the screen off, or automatically it is switched off, the backlight slider I find it at the lowest end.
Why thus is happening, it’s driving me crazy, please help me
I am having a problem with the volume levels for notifications. The volume for notifications (Gmail, text messages, etc...) will randomly become very low. This makes it almost impossible to hear the notifications. The volume settings are still set to the max volume in settings but the alerts are barely audible. When this happens the volume in better keyboard sounds on keypress is also reduced when this happens.
If I soft reset the phone by powering off and turning it back on everything returns to normal.
Apps that I have installed on the phone are
Better Keyboard
Brightness Level widget
GPS toggle widget
Retro clock widget
TasKiller
Tmobile Visual Voicemail
Weather Widgets
Anyone have any clues ???
Thank you
I thought I was crazy... I have the exact same problem. For the record, I have a good amount of the same apps installed too. I have a cover on my phone and I was thinking for some reason that was it, but the only way to make it return to normal volume is powering off and back on.
I've got the myTouch 3G.
possible app issue?
I ended up removing the GPS toggle widget and have not had the problem in the last couple of days so it may have been related to that app. Ill keep an eye out and see if it happens again.
Hm, I don't have that widget or the brightness level widget installed. I've noticed that it will happen and then go back to normal sometimes without restarting the phone... just by opening/closing random apps (at least I've yet to see a pattern).
Very weird.
Data issue.
If you have recently flashed any ROM that doesn't have the correct kernel to support media sounds that come standard with your device...it can corrupt the files within that specific folder.
More-or-less, it's like making an "unauthorized" change, but your phone recognizes that, so the volume settings do NOT function properly due to some form or interruption from elsewhere.
I would suggest downloading a third-party application such as Volume Control to keep the settings RUNNING as an application and not just a system setting.
In my case, I haven't touched anything like that. As far as rom, it's exactly as-is from the T-Mobile box.
It's driving me crazy because my ringtone is also effected. Sometimes I can't hear my calls even if I'm in the same room with the volume at 100% and other times it's inappropriately loud because of this issue of it going back and forth.
Factory reset / data wipe.
If you have uninstalled or NEVER added any third-party applications to your device to utilize those toggle features or settings for volume adjustments...then I would suggest a FACTORY RESET or "hard reset." This will simply wipe your phone back to the obviously stated "packaged" form.
This will remove any potential issues that could have been caused by an application conflicting with the system.
Good luck.
Is No Lock, both versions in the market, the only option for when your phone goes into sleep that will allow you to get the screen back on with the up/down volume or power?
Right now, neither work well with my Inspire. The one No Lock won't auto start upon boot, have to set it each time after a reboot. Then, the volume buttons when you hit them it beeps like you are adjusting the volume.
The other No Lock app doesn't even work.
The thing I really miss about my Nexus One, Trackball wake/unlock and LED alerts.
The No Led app doesn't support any mail app but Gmail...sigh. So no other option apparently I have searched and found for regular Sense mail application LED on the screen alerts with different colors etc..
EDIT: Figured out how to do a custom status bar message so it sees a new email from any app, that is good. But, No Led doesn't work if you are using a No Lock screen app. Although, when No Led is enable, the touch buttons at the bottom are active and you don't need to use another button to wake the phone.
So, good/bad. See how it works.
Thanks
Anybody help, please!
After flashing lollipop_theme_enabler via recovery and applying a theme, I've faced some strange missbehaviour from my G900F. It lost haptic feedback (no vibration) for back and recent keys, also samsung keyboard has no vibro at all. In addition pattern unlock now vibrates on every dot like it used to only for incorrect pattern. All the checkboxes and sliders (lockscreen, power saving, sound, notification, keyboard, accessability settings etc.) were carefully examined and had no effect on the described sympthoms.
Does anyone here knows how to fix the vibration problem?
PS Another little thing which makes me sad a bit is home button, for some reason I now have to push it twice to get to home screen.
Settings/Display/Sleep. It's always set on 1 minute, whether I change it or not. I've tried setting it to 5 mins and it goes right back to 1 min. None of my changes will stay. Always 1 min. My tab is not rooted and its up to date.
I cannot find the answer anywhere. Any searches I make on Sleep never give me the correct search. I am at my wits end. It's extremely annoying when reading something and the display closes down. I always have to press the Power button to wake it up.
Please give me some suggestions.
Thanks
Restart in safe mode and test if it works.
(To restart in safe mode push power button until the shutdown dialog appears in screen, then push it but don't release it until safe mode dialog appears)
If it works the problem is caused by a third party app so you need to look for that app and change its configuration of uninstall it (should be an app related with energy or screen management, a screen filter, etc...).