Settings/Display/Sleep. It's always set on 1 minute, whether I change it or not. I've tried setting it to 5 mins and it goes right back to 1 min. None of my changes will stay. Always 1 min. My tab is not rooted and its up to date.
I cannot find the answer anywhere. Any searches I make on Sleep never give me the correct search. I am at my wits end. It's extremely annoying when reading something and the display closes down. I always have to press the Power button to wake it up.
Please give me some suggestions.
Thanks
Restart in safe mode and test if it works.
(To restart in safe mode push power button until the shutdown dialog appears in screen, then push it but don't release it until safe mode dialog appears)
If it works the problem is caused by a third party app so you need to look for that app and change its configuration of uninstall it (should be an app related with energy or screen management, a screen filter, etc...).
Related
My practice is to turn off my HD after use (I use 3rd party app to turn off the machine instead of pressing the power button), and put it back to the pocket. Recently, I found that my HD have do something when it is off, such as,
- make a phone call
- Go the the TF3D Photo tab and viewing a photo
- Showing the Power setting page (I set it to the LSK)
I'm 100% sure that the machine is off, so I wonder if my machine got a problem?
are you REALLY 100% sure it is OFF and not only in standby (aka screen off)? there is a old version of a 3rd party app that when you tap the poweroff icon goes standby and NOT poweroff. you should disable the 3rd party app and shut down your device using the default power button.
instead if you like having it only in standby you should keep in mind that standby does NOT by any means autolocks the screen. I'll try to explain:
you put the machine in standby and put it back in the pocket. you receive, dunno, a ring or a sms or something else. automatically the screen turns itself on, activating the touchscreen, and then all hell breaks loose
there are some solutions to this: a long press of the end key enables the default lock feature of the device. then you can turn off the screen safely (or almost safely)
also you might want to install s2u2 and set it to autolock on screen off. you turn off the screen (either with your app or the power button) and when resuming you have a neat "slide to unlock" screen (iphone-like). This is the solution i suggest more.
I am quite sure i talked too much but i hope i've been useful anyway
Hi all.
I have this annoying problem with my Blackstone.
When the screen turns off everything closes down. It's really annoying if i'm using messenger or something and not look on it for 2 min it closes messenger down.
I know i can choose in battery setting not to turn off the unit if it's not used for a while, but i still like that the screen is turned off, but still working.
Can this be done??
Dipper60 said:
Hi all.
I have this annoying problem with my Blackstone.
When the screen turns off everything closes down. It's really annoying if i'm using messenger or something and not look on it for 2 min it closes messenger down.
I know i can choose in battery setting not to turn off the unit if it's not used for a while, but i still like that the screen is turned off, but still working.
Can this be done??
Click to expand...
Click to collapse
Yes it can.
Go to Start/Settings/System/Power/Advanced and you can select the screen or backlight to turn off if device is not used for x mins on either battery or external power
Fallen Spartan said:
Yes it can.
Go to Start/Settings/System/Power/Advanced and you can select the screen or backlight to turn off if device is not used for x mins on either battery or external power
Click to expand...
Click to collapse
Yeah i know, but it only turn the lights down, not turn the screen off. It's only if i choose to turn off the device the screen turns off.
I use gyrator to set up an event that turns the screen off without turning the device off when the stylus is inserted (you can modify the default gyrator behaviour which is to lock the screen when the stylus is inserted). If you want to be fancy you could set it up to turn the screen off if the phone is turned face down, you don't really need the screen on then anyway unless you're in the habit of looking at your phone above your face while lying on your back, or trying to use it while doing acrobatics in an stunt plane.
shuflie said:
I use gyrator to set up an event that turns the screen off without turning the device off when the stylus is inserted (you can modify the default gyrator behaviour which is to lock the screen when the stylus is inserted). If you want to be fancy you could set it up to turn the screen off if the phone is turned face down, you don't really need the screen on then anyway unless you're in the habit of looking at your phone above your face while lying on your back, or trying to use it while doing acrobatics in an stunt plane.
Click to expand...
Click to collapse
Well i can't get it to work :-/
What i'm looking for is also a thing so the device isn't turned off when i push the turn on/turn off button on the top. I want to use this button to turn off the screen and not close down the programs.
This is what i'm looking for and i hope someone can help me
Dipper60 said:
Well i can't get it to work :-/
What i'm looking for is also a thing so the device isn't turned off when i push the turn on/turn off button on the top. I want to use this button to turn off the screen and not close down the programs.
This is what i'm looking for and i hope someone can help me
Click to expand...
Click to collapse
Just tried the screen off when phone is face down and it doesn't seem to be working for me either for some reason. But the stylus in event is working fine, just pop the stylus out and put it back in again and the screen goes completely off without killing the processes in the background (can still explore phone with active sync). I wouldn't want to mess with the power button as that is really useful to provide a proper device suspend when I want it.
I have a similar problem but with the GPS.
I have raised the question here, on some other forums and directly to HTC.
From HTC I got the answer that it is done by design to minimize battery drain and that they would have many angry costumers complaining about low battery life.
The only solution I know of so far is to use a 3rd party app.
I use "screenoff" and everytime I use the GPS I go to advanced-power and uncheck all the boxes.
When I'm done using the GPS I check the boxes again, otherwise I'll have to remember to turn the screen off manually everytime in "normal" usage of the phone.
I think it's sad though on such an expensive device not to have the option to run programs and hardware in sleep mode.
I'd rather find a solution where I can push the power button as usual and where I can have the boxes in advanced-power checked all the time.
I managed to get gyrator to turn the screen off by flipping face down, just needed to put the screen off command before all the rotation disable commands. Now if I want to disable the screen I just have to flip it face down for a second or so.
Thx for all your help.
But i found out that it's not only when the screen turns off everything closes. If i just leave it on home screen for like 2 min. everything also closes down.
I've heard from another forum that it's something HTC has decided to do to keep on the battery....
I don't know if there is anything to do here then??
Go to the start button, select settings, select system , scroll down and select power then the advanced tab and UNTICK Turn off device if not used for 2mins for both external and battery power.
shuflie said:
Go to the start button, select settings, select system , scroll down and select power then the advanced tab and UNTICK Turn off device if not used for 2mins for both external and battery power.
Click to expand...
Click to collapse
Done that... Still closes everything after around 2. min....
Strange, doesn't do that on mine.
shuflie said:
Strange, doesn't do that on mine.
Click to expand...
Click to collapse
I had a similar problem and only thing which resolved it was a hard reset!
I'm just testing it again to make sure. Have a track playing in the HTC music app and I'm signed in to messenger. Screen is off and I'm waiting for 3 mins to make sure.
Fallen Spartan said:
I had a similar problem and only thing which resolved it was a hard reset!
Click to expand...
Click to collapse
That was going to be my next suggestion, really doesn't sound like normal operation to me. So hardreset and install one app at a time until you find out what is messing things up for you. 3 mins are up and track is still playing and I'm still signed in to messenger.
Thanks to a guy called Dawsonas I just found a program called Pocketshield.
It has an application permission feature:
"When this app is running override power off: just do screen off" (use this option for music players, GPS apps, loggers, IM, or any app that needs the device to stay awake). This setting will take effect either when "Power off on lock" or "Power off after 20 seconds" options are enabled.
Check it out
http://pocketshield.netserver01.com/
Magster said:
Thanks to a guy called Dawsonas I just found a program called Pocketshield.
It has an application permission feature:
"When this app is running override power off: just do screen off" (use this option for music players, GPS apps, loggers, IM, or any app that needs the device to stay awake). This setting will take effect either when "Power off on lock" or "Power off after 20 seconds" options are enabled.
Check it out
http://pocketshield.netserver01.com/
Click to expand...
Click to collapse
I will try that
But do you guys think it could be some settings in the ROM? Should i try another one or what do i do when you say it isn't normal for the phone?
Please bear with me as this may be a dumb newbie question. I searched every post on the Imagio section here and at PPC and was unable to find an answer.
Got the Imagio for my wife and she's loving it (we had Storms previously- bad, bad mojo). She uses Groovefish to stream music and the stock dimmer setting will shut down the player after the time limit is reached. No problem, right? Changed the setting to stop this (never auto shut down on battery power).
Now, the screen will dim somewhat when left idle, but never shuts down all the way. It's dim but still active. She's been having to change the setting every time in order to not kill the battery.
Should the screen power down all the way while leaving the device active (like hitting the "shut off screen option" after holding the end button)? If not, is there a way to do this?
Thanks for any insight you may be able to provide. I've done nothing but Blackberries for years and this is my first real foray into WinMo.
Try to check the power settings. Go to the Settings Tab and push All settings at the bottom. From there go to System > Power > then click the Advanced tab. That should have settings to turn off the screen after 1 min or 30 seconds.
Thanks for the quick reply. I probably should have been a bit more clear.
It is in that menu that I have been manipulating the settings. There are two options for battery power. There is one to "turn off backlight" after x amount of time, the other is to "turn off device". With backlight set to 30 (or whatever) and device disabled, the screen never completely goes off.
It functions properly with "turn device off" enabled, but interrupts Groovefish when playing. This does not interfere with the native TF3D media player. While its not the end of the world if she ends up having to change that setting to use the program, it would be nice to be able to disable the screen with a partial shutdown (and extra battery drain when using that application).
Cheers!
Thats interesting, seems like its the program thats doing that. I have Opera, FM radio, email client, etc. running all day without it crashing. I have seen this before with Internet Explorer where i would leave it running connected to a website. then when i check back IE is gone and i have to start it again. By any chances is this a website or an installable app that you are using?
Groovefish is a streaming music client that is installed on the device
BTW, it is incredibly cool if you don't have it yet. Stream just about any song you want for free (legally).
http://forum.ppcgeeks.com/showthread.php?t=88505
I use g-trigger to shake my phone to turn off the display works great! Just disable the shake to turn it back on.
I'll give it a shot and see if the application stays running. Many thanks!
Actually I think backlight off is happening when it "dims". You need the screen to go off, not just the backlight. Try using xdaShutdown to go into Lightsout mode and see if that works for you. The program can be found here:
http://forum.xda-developers.com/showthread.php?t=544016
Skins in the same thread as well.
For some reason my screen just dims instead of turning off when I dont use the phone. If I press the hang up button it goes off like normal but if I just set it down it dims and stays on, draining my battery... Has anyone else experienced this?
starsanddots said:
For some reason my screen just dims instead of turning off when I dont use the phone. If I press the hang up button it goes off like normal but if I just set it down it dims and stays on, draining my battery... Has anyone else experienced this?
Click to expand...
Click to collapse
I take it you've already checked your backlight settings in Settings, Power ?
Yes and I have done a soft reset as well. I'm not really a "phone guy" so I hope this is something easy to fix....
Hello,
The way I have my device setup to get round this problem is this:
Go to Settings>Sound&Display> then scroll down until you see Display then click on Backlight.
On the page that appears, scroll down to "On Battery Power". Here put a tick in the box "Dim Backlight..." and set the time you want to allow before this function kicks in (mine is set at 2 mins).
Next, move down to "Turn off Device..", put a tick in here, and then set how long you want the device to stay on for before it goes off (mine is set at 3 mins).
You can use whatever time settings you feel comfortable with. Please note that it is the setting for "Turn Device Off..." that will blank your screen for you. The other setting simply dims it and leaves it running, as you have said before.
If battery performance is an issue for you, take the tick off "Automatically adjust backlight" and put in your own settings. So here, for example, I have my backlight on battery permanently set at 30% and on External Power, 60%.
The screen is so big you get blinded at anything above 60% (well at least I do).
Hope this helps.
WB
screen not turning off...during call via BT-headset
Hi guys!
My screen does not turn off even during phone call via Bluetooth-headset.
Any ideas how to fix it?
Thanks!
anyone?
so I put the dimming to be after 30 seconds, which works.
however I put it to shutdown the scree after one minutes, however it stays on forever, unless I physically press the hang up key, the screen will be on all the time.
the other question I have.
2- When I search on google, and press on one of the results in opera it takes me to the definition page, rather than the actual result that I wanted
3- is there a fix for LED notification, I installed the cab to fix that, but it didnt make a difference.
4- the pink spot at the middle, I searched around but didnt see any real solution
can anyone help please
regards
While I can't offer any help, I can feel your pain! I too am experiencing this f**ing event! I placed in my pocket before boarding for a 6 hour flight yesterday and found it still powered on when the flight had ended. I had just enough power to make and receive a call! Great.
I've double/triple checked my settings after this same thing happened to me previously! WTF!
edved.
i had the same problem what you need to do is to change the screen light setting in the settings menu
moneysaver05 said:
i had the same problem what you need to do is to change the screen light setting in the settings menu
Click to expand...
Click to collapse
Ok. I'll try your suggestion, but please tell me what the screen light setting should be?
Thanks.
just go to the backlight settings, tap ok and it seems to be fixed..
(but offcourse check if is set to turn off after a minute or whatever your needs are)
I experienced this yesterday.. just like in normal windows, some functions just stop working with no particulair reason.. I don't really worry about it.. probably fixed in the next rom.. same sometimes happens with the screen lock, sometimes it's gone.. also after reboot, althought I find it more convient that way, it can be fixed by locking the device manually.. this does proof we can disable the device lock somewhere, I really don't need it in the case I use, the power button is enough..
good tip to always push the power button before putting the device away.. saves a lot of battery too then to wait for the minute before it powers of by itself.. the large screen is the battery's biggest consumer.. this way you also don't have to trust the automatic power off.
problem is pushing the power is not enough.
because if there were any even that woke the phone up, it will never shut down the screen unless you saw it, and do it manually
mmmalas said:
problem is pushing the power is not enough.
because if there were any even that woke the phone up, it will never shut down the screen unless you saw it, and do it manually
Click to expand...
Click to collapse
no the automatic power down is seperate from the screen lock, but for some reason they connected it with the automatic power down and left the options to choose out.