Righto. Seeing I was unable to find a quick and painless solution which would allow me reverse-tethering, I plugged in my old PCI wlan card /w antenna, and ran Windows Virtual Wifi ( via cmd prompt, works better than Connectify, but Connectify is simpler to use for a average user ).
All's fine, internet works, but the problem is - my phone reconnects every 10 sec-10 minutes, can be any time interval - sometimes it works for 20 mins uninterrupted, then it disconnects and connects again.
Obviously the problem lies in the fact that if I'm downloading something ( which is only reason why I want internet on my mobile phone while I'm home ), it gets interrupted and I need to start over, which is incredibly frustrating.
I did some research since I also have laptop with wifi built in :
-If I start up the same thing I do on my main desk PC, and connect with my phone, my phone never disconnects ( ruling out a possibility of a problem with my phone )
-If I connect with my laptop, to my desk PC's virtual wifi, it never disconnects either ( which also rules out that there's a problem with my desk PC )
Basically, it's prolly got something to do with settings on my desk PC, but I have no idea which settings.
Anyone have a clue ?
Related
Hi to all , i'm a new user of TYTN .
I always use it as a modem to surf the web via BT in conjunction with my laptop.
My question is : there is a way to defaul the wireless modem to BT ( it default to usb ) when start the program and ( maybe ) the program starts automatically without select MENU>START....
ALSO : i saw that the internal modem work also when the device is into sleep mode and without starting the wireless modem but in this case the connection hang after few minutes ( i think the BT connection to the PC hang ).
If the device is in active state the internal modem work too and fine but if no data is exchanged for a while the device goes to sleep without advice then connection hang.
No problem using the wireless modem .
Again ... there is a way to add the internet sharing via PAN BT like hermes' brothers ( P3600) ???
thx in advance
Greeting from Italy
Davide
I'm having the same problem, also in Italy on TIM. I have tried two different SIM cards, different data plans, and can not find any pattern to the disonnects. If the connection sits idle, it will suddenly stop passing traffic. I have at times been able to keep the connection active by running a game (WoW) in the background on my laptop, but as soon as I the game quits due to timeout (not playing), the connection gets "stale" and dies. Other times, the game will not keep the connection active either. The time it stays active is inconsistent as well. Sometimes when I connect, I get no received packets, only sent. If I disconnect/reconnect 4 or 5 times, usually I will get a good connect and be able to open a web page. I do find it is worse in the daytime than in the evenings, but this is not always true.
BTW, I'm on a TyTn, MacBook Pro w/ the modem script linked from the wiki.
Any ideas?
@ jcolley :
i don't know about macbook , but a problem like your appear on micro$oft XP with the built in bluetooth stack .... much more better use the widcomm stack or toshiba stack for bluetooth
vdavide said:
Again ... there is a way to add the internet sharing via PAN BT like hermes' brothers ( P3600) ???
Click to expand...
Click to collapse
Nope, as there still isn't an AKU3 ROM for the TyTN.
As far as disconnection problems are concerned, try using a desktop-based ping utility to keep up the connection.
Menneisyys said:
Nope, as there still isn't an AKU3 ROM for the TyTN.
As far as disconnection problems are concerned, try using a desktop-based ping utility to keep up the connection.
Click to expand...
Click to collapse
OK , but i mean if there is an apps to do this .
BTW does AKU 3.3 support more than 1 pc connected to inte rnet trought PAN BT ?
thx.
Vdavide
Hi,
I've been a palm user for ages but now but i was trully missing wifi capabilities on my past units... Since my enfora wifi sled for treo died on me I made research for a new smartphone that would do wifi and I ended up picking htc hermes.
Everything works fine so far BUT WIFI(the sole reason i went for that unit).
First test : I have an old netgear wep and 802.11b only router at home used as a switch. Tried to get it to work with it with wep no go, without encryption no luck. Says connecting, then all of a sudden, the network becomes unavailable for few seconds and then pops back as avail... tries to connect again, unavail and this goes on forever...
Second test : there is a unencrypt wireless network detected, said to myself I would *try* it. Magic, it gets an ip and everything. I can connect to the AP with IE. I didnt tried to axs internet or do further, it was connected !
Third test: @work, Ive read on forums ppl had working wifi with WPA+tkip. At work I have a couple of linksys WAP54GX, so i did setup a WPA + TKIP wireless network. It worked the first day. I was pretty happy, finally wifi DID work. Could SSH to boxes browse internet everything was fine.
The day after, I decide to install opera mobile. It worked like a charm for an hour... then all of a sudden everything was slow as hell -> soft reset. To my suprise, the config that was working few mins ago wasnt working anymore... Now even the WPA+TKIP setup that was working few hours ago stopped working. Same deal, connecting... , then wireless network goes unavail, goes back avail and fails to connect.
Anyone experienced similar issues ? I doubt its HW related since it did work for a day... and i still can connect to the unsecure wifi from neighboors (that always worked). Is there any application or tools or simply logs I could dig in to figure out out what is going on ? I mean if it wont connect id like an error msg not the whole ap go unavail for 1 min then pops back like nothing.
Is there anything avail for troubleshooting wifi connections in windows mobile or we only have the M$ way of having no information whatsoever ?
-ByPasS
Hi all - when I first got my Shift I was able to connect to my home WiFi and see all the others around me too. Now, having liberated, un liberated, isntalled XP, uninstaleld XP, reset Vsita about 5 times my WiFi just will not see or connect to any networks.
The device manager shows everything and last night after some random tinkering in their it suddenly burst into life for about 40 seconds and then stopped.
Addtionally, network connections tend to freeze while WiFi is fudging around trying to work...cannot open any network windows etc. Also when in this state Vista cannot close down properly - stops at the last screen and stays there.
Is it at all possible in my playing I could have damaged the chip or any internal software on it (does it have a rom?)....drivers always install OK and as I say device mgr seems alright too.
Or am I just dumb when it comes to Vista networking? I've never liked it and maybe I'm doing something that is stopping the whole wifi thing from working?
My router is a Linksys one and works OK with o0ur other PC's...and I know it's more than just a potential router issue because normally the shift would see my neighbours network too - now, it's a blank.
Any ideas at all would be great - thanks in advance. FF
Ok, so I've had issues with vista and pam before, but I have a new one, that I can't find anything about on google, on here, or anywhere else so far. I have a laptop with vista 64 home premium that I can PAM with mogul's ICS using my phone or my wife's (both are on the unlimited PAM plan.) My wife's laptop runs vista 32 home premium, and both of our phones have an identical issue when trying to tether with it, meaning its not an issue with the phones. When connecting to PAM on her laptop, 7/10 time, it will go through the steps, and when the vista networking gets done with identifying, pulling an IP from the phone ICS, and checking for connectivity (which vista does by pinging a server by domain name to determine that the DNS is working in addition to the network being open) it will be up for a split second, then disconnect. Sometimes it will disconnect after Identifying, but before making the connectivity check. The rest of the time, it connects and works fine. We have tested other cables, and recently I tested it under safe mode with networking, and made my first progress.
Under Safe mode with networking, it will connect perfectly every time. The hard part now, is I do not know what program or device conflict could be causing it to disconnect immediately after completing connection. Has anyone had this issue and found any other programs or hardware to interfere?
I haven't had this proble in specific but I did have a problem with using ICS in vista to let my PS3 go online via my laptop using the mogule as my internet connection, in one instant it actually gave me the blue screen of death. I have to say that with Ubuntu and Vista the best way to use the phone as modem is to run ICS (on the phone) and hit connect (I'm speaking about the usb method) the phone will say check cable or something and then hook the cable up. This way has eliminated the quick disconnect witch i experience in Ubuntu a few times.
Hope this help
Hi guys,
As you all no Wifi dropping is when your phone is connected to the router but not the internet, i.e. you can see the wifi symbol but webpage does not load.
I have got a suggestion: Turn your Laptop into a virtual Router using these softwares. This will work on pre-rooted phones also.
Connectify - http://www.connectify.me/
Paid service but the Lite version fully works on one phone. Havent tried to connect more than one.
Virtual Router - http://virtualrouter.codeplex.com/
Free and open Sourced. This worked perfectly on the first day, but when i put my PC on hibernate, its showing an error everytime I run it. Might work for you.
Maryfi - http://www.maryfi.com/
Free and ad-supported. Was too hard to setup. Iam going to try again some other time.
Note: All of the above works on my Windows 7 Laptop PC, not sure on Desktop PC or Mac.
Let me know here if it works for you. Add some more if I missed any.