Related
Hey, I tried flashing JW4 stock rom via ODIN which I downloaded from sammobile.
The name of the file is I9000XXJW4_I9000OXAJW4_XEU.zip and on extracting there were 2 files called JW4_JW4_JW4.tar & SS_DL.dll. I selected the tar file in PDA and flashed. The process passed but am stuck with bootloop. Plz help
I also flashed a jw4. But that was without the dll.
Anyway, after i flashed and it booted up i got a doozen errors telling me it couldnt mount different partitions.
So i gave it up as a bad one and found a thread here at xda with different stock roms and ended up with jw5.
No complications whatsoever. Yet
just google for "stock roms i9000 xda" and you should stumble over the thread i believe.
Good luck
Sent from my GT-I9000 using Tapatalk
I faced exactly the same problem: bootloop after flashing XXJW4 and many mount errors in the screen. I concluded that this firmware is not standalone in the sense that you cannot flash and repartition the device using it. Following this logic I performed these steps, leading me to a successfully recovered and fully functional XXJW4 phone:
Flash it with a full stock firmware, e.g. XXJVU (mark "repartition" as well).
Flash XXJW4 as you have done it, but make sure "Repartition" is not selected. That is, just select the tar file in the PDA field and leave the rest with the default options.
Another huge problem Got Black Screen Of Death. Am able to get my phone on to download mode but odin is not detecting my phone. HELP ME What to do?
bindaasathar said:
Another huge problem Got Black Screen Of Death. Am able to get my phone on to download mode but odin is not detecting my phone. HELP ME What to do?
Click to expand...
Click to collapse
Use another USB port. You can flash deodex version of JW4 which doesn't have any problems
bootloops
Factory Reset / Cache Wipe /
use by the Pitfile from JW 1 and flash the JW 4 ,that`s it !!
LG.G.
jpabloae said:
I faced exactly the same problem: bootloop after flashing XXJW4 and many mount errors in the screen. I concluded that this firmware is not standalone in the sense that you cannot flash and repartition the device using it. Following this logic I performed these steps, leading me to a successfully recovered and fully functional XXJW4 phone:
Flash it with a full stock firmware, e.g. XXJVU (mark "repartition" as well).
Flash XXJW4 as you have done it, but make sure "Repartition" is not selected. That is, just select the tar file in the PDA field and leave the rest with the default options.
Click to expand...
Click to collapse
great job. thanks for this
bindaasathar said:
Hey, I tried flashing JW4 stock rom via ODIN which I downloaded from sammobile.
The name of the file is I9000XXJW4_I9000OXAJW4_XEU.zip and on extracting there were 2 files called JW4_JW4_JW4.tar & SS_DL.dll. I selected the tar file in PDA and flashed. The process passed but am stuck with bootloop. Plz help
Click to expand...
Click to collapse
Your PDA file might be missing the dbdata.rfs file, see here: http://forum.xda-developers.com/showthread.php?p=24182099&highlight=dbdata#post24182099, which can cause boot loops.
Hi guys
Sorry this is my first post and it will be a bit long but I've searched everywhere, absolutely everywhere with no luck at all.
So tonight I originally tried to update my MODEM to a Telstra one, and I flashed it via ODIN.
The ODIN flash failed and I stupidly pulled the phone out, and it gave me the dreaded
PHONE-----YELLOW TRIANGLE----- COMPUTER
'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I tried flashing a 4.3 KNOX stock rom later on (I realised it was a big mistake), that failed in ODIN as well
I have also tried re-partitioning with a PIT file as well via ODIN but it doesn't really help
ODIN keeps hanging on the "system" flashing command and goes to a red "fail". It won't start flashing "system.ext4.... etc"
I've tried all versions of ODIN and all version of 4.3
I can't use any 4.2.2 roms as the phone only seems to accept 4.3 stock roms now.
I've also tried KIES, but KIES will not recognise my phone, and ODIN hangs at 'system.ext4...' (can't remember, something similar, definitely said system)
So I have a completely bricked phone now... I can only get into TEAMWIN recovery but it won't connect to USB at all.
I absolutely can't flash anything with it failing in ODIN and KIES won't recognise my phone. I've put it in 'download mode' as well..
I've also tried flashing roms through TEAMWIN/CWM recovery but it instantly fails.
Are there any options open to me? I'm really scared that I have an expensive paperweight....
orchid18 said:
Hi guys
Sorry this is my first post and it will be a bit long but I've searched everywhere, absolutely everywhere with no luck at all.
So tonight I originally tried to update my MODEM to a Telstra one, and I flashed it via ODIN.
The ODIN flash failed and I stupidly pulled the phone out, and it gave me the dreaded
PHONE-----YELLOW TRIANGLE----- COMPUTER
'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I tried flashing a 4.3 KNOX stock rom later on (I realised it was a big mistake), that failed in ODIN as well
I have also tried re-partitioning with a PIT file as well via ODIN but it doesn't really help
ODIN keeps hanging on the "system" flashing command and goes to a red "fail". It won't start flashing "system.ext4.... etc"
I've tried all versions of ODIN and all version of 4.3
I can't use any 4.2.2 roms as the phone only seems to accept 4.3 stock roms now.
I've also tried KIES, but KIES will not recognise my phone, and ODIN hangs at 'system.ext4...' (can't remember, something similar, definitely said system)
So I have a completely bricked phone now... I can only get into TEAMWIN recovery but it won't connect to USB at all.
I absolutely can't flash anything with it failing in ODIN and KIES won't recognise my phone. I've put it in 'download mode' as well..
I've also tried flashing roms through TEAMWIN/CWM recovery but it instantly fails.
Are there any options open to me? I'm really scared that I have an expensive paperweight....
Click to expand...
Click to collapse
Try another usb port (recommended: back of the computer)
and flash again via Odin stock base rom 4.3
P.S: I was getting the similar problem you have. another usb port helped me
Bordo_Bereli51 said:
Try another usb port (recommended: back of the computer)
and flash again via Odin stock base rom 4.3
Click to expand...
Click to collapse
Thanks Yeah I've tried that, I've tried front, back, on a laptop, but Odin still red fails at the writing 'System' (the largest 'chunk' of the tar.md5 file) no matter which 4.3 rom I try
I so upset :crying:
orchid18 said:
Hi guys
Sorry this is my first post and it will be a bit long but I've searched everywhere, absolutely everywhere with no luck at all.
So tonight I originally tried to update my MODEM to a Telstra one, and I flashed it via ODIN.
The ODIN flash failed and I stupidly pulled the phone out, and it gave me the dreaded
PHONE-----YELLOW TRIANGLE----- COMPUTER
'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I tried flashing a 4.3 KNOX stock rom later on (I realised it was a big mistake), that failed in ODIN as well
I have also tried re-partitioning with a PIT file as well via ODIN but it doesn't really help
ODIN keeps hanging on the "system" flashing command and goes to a red "fail". It won't start flashing "system.ext4.... etc"
I've tried all versions of ODIN and all version of 4.3
I can't use any 4.2.2 roms as the phone only seems to accept 4.3 stock roms now.
I've also tried KIES, but KIES will not recognise my phone, and ODIN hangs at 'system.ext4...' (can't remember, something similar, definitely said system)
So I have a completely bricked phone now... I can only get into TEAMWIN recovery but it won't connect to USB at all.
I absolutely can't flash anything with it failing in ODIN and KIES won't recognise my phone. I've put it in 'download mode' as well..
I've also tried flashing roms through TEAMWIN/CWM recovery but it instantly fails.
Are there any options open to me? I'm really scared that I have an expensive paperweight....
Click to expand...
Click to collapse
Hello,
For my part, I also encountered problems! the only rom that is passed via ODIN after testing 5 other is:
I9505XXUAMDF_I9505PHNAMD8_PHN
But if Knox! possible that this does not happen either?
*************
For me I do:
1 - Flash with Odin Pit
2 - Flash with ODIN last recovery philz_touch_5.15.8-i9505.zip
3 - Wip full recovery for new rom
4 - Flash the I9505XXUAMDF_I9505PHNAMD8_PHN
And then this happened.
Alan-B said:
Hello,
For my part, I also encountered problems! the only rom that is passed via ODIN after testing 5 other is:
I9505XXUAMDF_I9505PHNAMD8_PHN
But if Knox! possible that this does not happen either?
Click to expand...
Click to collapse
I thought with the official 4.3 new bootloader, we cant downgrade to 4.2.2.
Try another Odin version or extract the .tar file via Winrar (rename it from .tar.md5 to .tar if your file ending at .tar.md5) and flash the system.img.ext4 via this tool http://forum.xda-developers.com/showthread.php?t=2333807 see if you getting error with this tool while flashing the system.img.ext4
and then try to flash again with odin
P.S. While flashing via Odin kill in Task Manager Kies and related process and flash again
Bordo_Bereli51 said:
I thought with the official 4.3 new bootloader, we cant downgrade to 4.2.2.
Try another Odin version or extract the .tar file via Winrar and flash the system.img.ext4 via this tool http://forum.xda-developers.com/showthread.php?t=2333807 see if you getting error with this tool while flashing the system.img.ext4
and then try to flash again with odin
P.S. While flashing via Odin kill in Task Manager Kies and related process and flash again
Click to expand...
Click to collapse
Hey Bordo
Thankyou so much for your suggestion - I will try the individual component flasher later tonight and then write back on what happens
I will also remember to kill Kies with task manager beforehand, before using ODIN or any other flasher :good:
Thankyou so much for your time and effort in trying to help!!!! Much appreciated
Hi all!!
So I have been searching long and wide for a solution, and as time passed witch will be more or less a whole morning, I found it!
The solution to my problem was not as simple and that you can try it at your OWN RISK!!
Download your selected firmware and in this case it would be the "N9005XXUENB4_N9005VFGENA4_N9005XXUENB1" South Africa version.
But we are looking at the red and blue selected ones, where if you have downloaded Poland's rom (official) the the blue (bootloader i think) is a higher version then the S.A one.
So if you encounter the same error just go on and download "Odin3-v1.85" and the SM_N9005 pit file or my fail fix attachment...
NOTE* THIS IS FOR SM_N9005 ONLY!!!
And then just download your NB4 official rom and include it to the fail fix folder.
Open odin.
Add the My-N9005.pit file adn add your rom in AP.
And start, O and then wait for it to say Pass
And your done!! Hope I helped and thanks to the guys that gave me the pit file. And to Odin..
Any one know how to recover this Tab? It does not turn on at all. Bricked flashing firmware file with ODIN. Got stuck and everything broke after that.
So no one knows anything about unbricking this tab?
A,
hey hey, good morning, provided you didn't trash your pit/patition info your tab should be recoverable,
you will need these, [not addressing the stock option here]
recovery, flash via odin first, you'll know real quick if you're done or not, if you get any pit error messages, yup, dead
https://www.androidfilehost.com/?fid=95916177934547320
note- if odin complains about the signature just remove the .md5 extension from the file
rom, put this on your sdcard and flash via recovery
http://forum.xda-developers.com/tab-4/development/rom-sm-t231-odex-root-t3052254
this rom will cover sm-t230/nu/31,
that's probably your best option. usually when odin bites it on a flash, you'll need to get a successful recovery.img or boot.img
to go through to get odin out of the error mode it gets stuck in. BUT, like i said before, if you boned your pit/partition info, then
you're done.
m
let me start by saying I've read almost all your threads only reason im actually bothering is because I'm really feeling like smashing my phone to bits .... that's how frustrating this has been. my phone was rooted and custom ROM till about 4 weeks ago, when Tmobile told me the IMEI on my phone was reported as stolen ... i grabbed my box as my phone i have since it was new and compared the IMEI ... to my surprise IMEI on box and on Phone chasis was not same as the one inside phone .... my phone was unblocked by a local unblocking service here in PR so i went to them and surely they took my phone and lent me another one while it was getting fixed ... "IMEI" was being changed again and it wasn't the one on the box either ... the gave me lame excuse about my IMEI .... they kept my note 3 for a week almost 2 after i got it back my note 3 said it was rooted but i couldn't use any apps for rooted phones as it would say i didn't have root access ... as i no longer trust these people i went on and tried fixing the issue myself ... and here's the thing i have tried absolutely everything cf auto root tar from download mode and even thru odin all versions of odin and using the sm-n900w8 cf auto root and the right roms "different one's to see if it was the rom's or the phone" i am about to give up i simply cannot root my phone so that i can install a modified rom ... thought of contacting you guys ... as my last resort ... i am so sorry to bother i know you guys are very busy ... but if you guys cant help i will have to settle for just a regular note 3 and that sucks... i have picture of absolutely everything i have tried and the outcome and the errors i have gotten and all in pics if needed...
Please pardon me for asking for a little help i really thought i could done this i guess i am not as savvy as i have thought...
Thanx in advanced Emilio Pinella
Does the IMEI on the box match the IMEI on the label attached to the battery compartment?
Have you tried using Odin to get back to a completely stock ROM, flash TWRP, and flash supersu from TWRP?
Ok here we go ...
Yes IMEI on box and phone chasis are same ... the different one is when you press *#06# ...
Secondly i have tried usin odin but absolutely all the files i downloaded are in .zip and odin does not recognize any of them i tried to convert from zip to .tar but it crashes odin thats why i have tried it from recovery mode ... even CF auto flash for sm-n900w8 doesnt work odin does recognize phone so it isnt a driver issue ... maybe if i had apropiate files in right format i could try flashing from odin ... but i dont and i cant find the files in .tar which is what odin recognizes ... as i said i have really tried almost everything ... i have been wondering can it be possible these people lock my phone in a way i could not do anything? ... will wait for your replay ... my phone sucks @The Moment i havent downloaded anything as i am factory resseting everytime i try a new method ... just fyi i do activate devops and usb debug after each wipe ...
Use 7zip or WinRAR to extract the zip from sammobile.com. Once unzipped, it should give you a tar. md5 file.
hello again...
well i was certain of my answer but before i started writing i had doubts so i went and open all the files i have for flashing with odin ... and yes none of my .zip files have any .tar files in them , i have no clue why they are zip files if they are intended for use with odin ... so i went to sammobile.com and yes i had downloaded the 3 files pertaining to my cel phone and tried flashing the stock rom but none of them worked ... some just werent recognized and some gave me whole file signature error or signature failed error ...
i have Tesla-hlte-5.1.1.High_Voltage.2.1-Release-20150824 and its a zip and has no .tar, inside also have cm-12.1-20150423-UNOFFICIAL-temasek-hlte-V10.4 and also no .tar inside and its in .zip format, also have X-Note_Build_15_ND5_Public and yes its a zip and no tar inside...
SM-N900W8-4.4.2-(KOT49H.N900W8UBUCNI1) is my original ROM and it does not have .tar inside ....
something they all do have in common is they have an img file inside that cannot be open ...
and i downloaded files for twrp but jajaja also in zip and no tar inside , just an image file wich is not recognized by odin and not recognized by recovery mode either as i have tried putting all these files in my sd card and have tried doing from recovery ending with results of .... whole file signature failed and signature failed error and also wrong footer error i have pic of all this ... would you want me to send them to you i wouldnt mind... btw thx for your time i really apreciate it.
If the files came from sammobile.com, they are defnintely tar. md5 files.
How many times are you unzipping the file from sammobile.com? The original file from sammobile.com should only be unzipped once.
Well after last replay i went and downloaded all 4 available files for my note 3 from the one dating at 2013 to the one with 5.0 lolli i will do this again tonight and will post the results ... i am certain they will be the same as last time but can you please remind me of steps to take using odin and which odin should i use as i have a few versions .
Once again thx for your time .
I like Odin 3.07 which is what I always use.
If you use Odin 3.07, put the phone into download mode, open Odin 3.07, place the tar.md5 file in the PDA box, uncheck everything except f.reset time, connect phone to computer, flash, when you see the word "RESET" in the status window, remove USB cable, remove battery, replace battery, use button to boot into recovery, perform a factory reset, wipe cache, reboot.
Ok
I will do this from home as soon as i get there and i will post results any specific one you would want me to start with?
Start with a rom that matches the bootloader currently on the phone.
Ok
Hmmm is bootloader the number after model example UBUCNC1?
Yeah just checked and bootloader would be for my current 4.4.2 N900W8UBUCNC1 .... Also says that latest firmware is one of the firmware i downloaded the one containing lolli 5.0
So you downloaded the cnc1 from sammobile.com and there is no tar.md5 file after unzipping?
Just got home
I got home im unzipping and i will let you know in about 2 minytes if there are tar.md5 inside what i downloaded ...
Ok so far so good
All have .tar.md5 in them so i will try flashing with same rom version i have 4.4.2 to see if then i can root and flash a cutom rom ... tell you in a few minutes how it went... wish me luck.
ok finished
i finally got to flaSH WITH odin and now my phone is 5.0 lolli ... can you guide me on how to flash root with odin as cf auto root does not work i took picture of what it did when i tried to auto root tell me where to send it .... or can you tell me where or who might have tesla 5.1.1 high voltage rom or X-note in .tar.md5 format ...
once again thanks for your time and understanding all i need now is to be able to root it so that i may install custom rom after i actually find them in .tar.md5 format.
Find twrp here
http://forum.xda-developers.com/showthread.php?t=2494245
Get the latest 2.8.7 or any 2.x.x 4.4 .tar.
Then get SuperSu flashable. You can google that.
Flash twrp with odin.
Flash SuperSU.zip with twrp.
It's rooted.
If you want to flash a custom rom just flash the rom of your choice in twrp. No need to root first.
Sent from my SM-G925F
Root is not required if you want to install a custom ROM, just install a custom recovery. I recommend flashing TWRP.
Find TWRP for your device from here (make sure you download the tar version of TWRP): http://teamw.in/Devices/
Supersu 2.46 is here: https://download.chainfire.eu/696/SuperSU Download and save Supersu to either the internal or external memory. If you put supersu on an external memory card, power off the phone and put the card into the phone.
Boot the phone into download mode.
Open Odin and uncheck everything except f.reset time.
Click on PDA/AP button and put TWRP into the box.
Connect the phone and flash TWRP in Odin.
When you see the word "RESET" in the status window, remove the USB cable, remove battery, replace battery, boot into recovery, flash Supersu, and reboot.
Ok will do now and tell you if anything ... but i read somewhere this version of android is unflashable ... but i will try what you are saying .
Which version of Android is not flashable?
Ok i gotta say if it wasnt for you i would still be stuck ... fortunetly i am riding 5.0 lolli and my phone is now officially rooted all i need to do is get tesla's 5.1.1 high voltage on it and i will be good ... so basically just need tesla in .tar.md5 to be good ... all thx to you .
Where can i download it or now that i have twrp as my recovery can you guide me thru on that? ... thx again.