First off, I am very familiar with Custom Roms and Never had this problem before.
I had to use the 2.3.13 SBF bc I was in a boot loop from a theme. I am rooted again using rageagainstthecage and can access the ClockworkMod recovery. I have tried multiple times to install 2.3.15 deodexed from the TBH app with no success. ClockworkMod says the install was successful but under system info it states it is 2.3.13. I know that it is 2.3.13 odexed bc Tranquility causes a boot loop. Backup and Restore work fine but not zip files. Does anyone know why it will not install?
I think I just experienced the same thing. Had to use the same sbf last night. This morning I tried to install zapx and seems like nothing happened and I was back at stock. Also I cant get back into clockwork recovery.
SysAdmNj said:
I think I just experienced the same thing. Had to use the same sbf last night. This morning I tried to install zapx and seems like nothing happened and I was back at stock. Also I cant get back into clockwork recovery.
Click to expand...
Click to collapse
You probably need to bootstrap the system again using the koush's app, to get back into recovery.
I installed ZapX but I had network issues with the market. So i reverted using a backup.
I was able to get clockwork back and install a different rom and the rom took this time. Rubix .5 to be exact.
good news- full 2.2 sbf is available now. there are links in x development.
thanks but i think they removed the thread ?
SysAdmNj said:
thanks but i think they removed the thread ?
Click to expand...
Click to collapse
Yeah- they did. there are other android forums with links still. Or search for...
VRZ_MB810_2.3.15_1FF_01.sbf
on megaupload or hot file or one of those sites.
I'm running.588 buy whenever i try to flash .595 it continues to boot loop then I have to sbf back and flash everything again any suggestions i tried everything
Sent from my DROIDX using XDA App
I had similar issues getting to .588
My solution was to redownload everything and I found that one of the links (the one from the upgrade video I think) was a bad file of Z4root - I used a different link and after that everything worked.
Guess what I'm trying to say is re-download everything and use a different source because one bad file will kill you.
Isn't there a .591 you need to update to first? At least, that's the route I took.
It is worth noting that the .591 I used had a flawed root, but I still managed to get to the bootloader for the .595 step without fixing the problem.
Also, make sure you don't use the ODEXed rooted version of .595, as it will cause boot loops the first time you try to access the bootstrap. The deODEXed rooted rom is what I am using.
You can go from .588 directly to .595. I've done it. Just make sure you use the dodexed version. The odexed version has problems.
Sent from my DROIDX using Tapatalk
I got a droid incredible from a friend so I gave my old Droid 2 to my girlfriend. It has the first Gingerbread leak which is always shutting down on here and just being overall slow... I sbf'd the phone and then rerooted it and installed clockwork recovery threw Rom Manager and it said it installed successfully but when I tried to boot into recovery to flash a more stable rom (Liberty 1.5) it wont boot into recovery it just reboots the phone. Am I doing something wrong? I just need a more stable rom on the phone for my girlfriend... Thanks
You can't use rom manager on the d2. You need d2 bootstrap recovery app. Then you can get into clockwork recovery
Sent from my DROID2 using XDA App
What happened to the non-donate version? I bought it on my google account but my girlfriend doesnt wanna pay for a app she'll never use haha. I just need to get a stable rom on the phone for her.
Are you able to download the app through your google market? If so, I'd save the app for future use.
On another note, with the bootstrap you can update to the other rom if you've downloaded the zip IIRC.
So i was on liberty rom 2.0.1 and wanted to upgrade to the latest version in the nightlys. So i SBF back to version 2.3.320.MB810 and when i go to settings -> about phone -> systems update, it says i am already up to date. Can i get to gingerbread from this version or do i need to sbf to 2.3.340 to get to gingerbread.
I think you have to be on. 340, but I wouldn't encourage you to take the OTA to GB, download a prerooted .596 GB (team black hat...) then go from there.
Sent from my Xoom using XDA Premium App
So i sbf to .340 and tried to install the tbh .596 GB update, with the part1 and part 2 files. When i boot into recovery and try to apply the zip it give a error code of 7 during validation of the current system. According to the instructions the only thing i am not doing exactly is i am using the droid x boot straper not the droid 2. would that cause this. dont see the need to spend 3 bucks on something i already have
Try turning off USB Debugging prior to booting into recovery. I think I read somewhere that Droid X bootstrapper works fine as long as you do that first.
Ok so i hope someone can help me out on this i finally got to a TBH rooted GB install.
My next step is to get back on liberty because i just cant stand motoblur, gingerblut is a bit better than what came with froyo but it still sucks. the battery life is terrible and i cant stand all the bloat ware and crappy widgets.
I am not sure what issue i am having 3g data worked fine in liberty GB0.4 but if i ever moved past that it would stop working. So i spent a day and sbf to .340 then installed the TBH rooted stock GB. I then downloaded the libertyGB0.8 did a data wipe and installed it. No 3g data. I really love liberty have donated to them buying the pro toolbox and such. I really want to get back to liberty but i guess if i have to find a different rom i will . Anyone have any idea as to why if i go past liberty 0.4 i loose 3g?
Ok so this issue has expanded past just liberty. I tried to flash apex 2.0 rc1 with the same issue no 3g data. Phone calls and all of that work but no 3g data. i would really like some help with this dont want to get stuck on moto ginger. Will more than likely just go buy a different phone if i cant get this to work
You just need to flash the updated kernal. I had the same problem, and fixed it. let me see if I can find the thread with the info. All u need to do is download the zip file, put on sd card and flash. and itll work just fine. Ill look it up and post back. The 591_kernel_update.zip is what you need
Here is the file:
http://www.droidforums.net/forum/liberty-rom-dx/151857-no-3g-liberty-gb-0-7-a.html
Up until today I never did anything to my droid x as far as rooting and roms. I kept everything completely factory and android was at its latest version which is gingerbread 2.3.3 and system version 4.5.605.MB810.Verizon.en.US.
My goal today was to finally experiment this and install Liberty Rom. I completely failed because of all the version complications and plenty of other errors. Before I describe my final problem I should backtrack and let you know exactly what I did today so you can possibly get me out of this mess.
1. The very first thing I did was follow all of the steps at a forum on droid-life "How To: Get Rooted Gingerbread On DROID X" sorry it won't let me post the link.
After all of this I ended up with gingerbread again, but I guess a rooted version. No idea why this was the tutorial I followed when trying to install liberty. Throughout the tutorial I ended up buying "Droid X BootStrapper" because the tutorial had me use it.
Right after this tutorial I bought an app called Rom Toolbox for $5.00 downloaded Liberty through it and was trying to install through it. Every time it rebooted I would get a black screen. Never worked so many issues probably because I flashed the wrong sbf or something.
Here are the programs that I ended up buying today:
z4root (free), DroidXBootStrapper ($2.00), Rom Toolbox ($5.00).
That is everything I have done and all of the apps I own. Can someone please start fresh and give me short instructions to start from scratch on how to get the latest and greatest version of Liberty on my droidx from where I'm stuck at now. I want to completely start over and I am willing to do anything. I hope the apps I bought help and I also want to assume 2 of them probably do the same thing and I didn't need them.
Buying those tools will at least help support 2 members of the community (Koush & JRummy).
I'm pretty sure Z4Root does not work on the GB versions of DX firmware. That's probably why nothing is working. You aren't actually getting root.
you are on the .605 version of GB (when you see references to .602, .605, etc ...)
To get root, start here:
http://forum.xda-developers.com/showthread.php?t=1258599
You may also want to download the Droid2 recovery rather than the DX. The D2 version is a little newer and I think avoids a slight bug on later kernels when Debug is on. The D2 version works just fine on the DX. It can be downloaded free from here:
http://www.koushikdutta.com/2010/08/droid-x-recovery.html
Once you are rooted and have recover properly working, you should be able to use the Rom Toolbox to download and install Liberty. Just make sure you read carefully about the 'version' requirements on any ROM.
Oh ok so I was rooting it wrong.
I easily rooted the phone using Pete's Motorola Root Tools. I realized that Rom Toolbox Pro accesses clockwork recovery when the phone is rebooted instead of the phone just restarting fully. But, I still want to start fresh and do everything from the start again. Please let me know if you have any suggestions in the way or order I am doing things. My phone is currently up rooted at 4.5.596 and rooted by Pete's Motorola Root Tools but I want to start over from the beginning so here is what I am going to do:
Note: Before I do anything I am going to format my SD card for a fresh start.
1. Use RSD_Lite 4.9 to Flash my phone back to 2.3.340 using a file called VRZ_MB810_2.3.34_1FF_01.sbf. I always do this part with no problem.
2. Do a hold power+home then search and do a system wipe/restore. Then Activate service, sign into gmail etc.
3. Now that the OS is loaded (the old version with the grey bars 2.3.340) I am going to root my phone using Petes Root Tools. (I hope I can root it with this tool when the firmware is this version.)
4. Put the 3 zip files I have on my SD card to upgrade to GB 588. Also put my GB 596 file on here.
5. I will download 1 app. D2BootStrapper. Bootstrap recovery, reboot into recovery. Install all 3 zip files from SD card. Now I boot up in GB 588.
6. Now I go right back into D2BootStrapper. Bootstrap recovery, reboot into recovery. Install GB 596. Now I have GB 596 rooted and loaded.
7. After this, shouldn't I be able to download Rom Manager Premium and Rom Toolbox Pro and test as many roms as I want? always reverting back to my original backup.
I noticed after installing liberty I was getting all kind of force close popups. And the phone wouldn't connect to service. But then I just held power + home then hit the up/down arrows and did a wipe/restore and it loaded liberty and everything works. Is this normally what has to be done when installing roms?
If there is anything wrong with my process please let me know. Whew I can't believe all that I learned in 1 day.
You've got a lot of steps there that really aren't necessary. When you install a ROM like Liberty, it replaces EVERYTHING in /system. Thus, about all that is left from a .596, .588, .602, etc install is the kernel. The Kernel doesn't change very often in Motorola builds. The last change was on .602. Thus, for your purposes there is no difference between .602 and .605 (FYI, .605 was just a keyboard fix over .602).
So, if you search around, you should find an SBF or AIO flash file to get you to .602.
Or you can simply take the OTA update from VZW after SBF'ing to .340
Once you've flashed your Rom, be sure to clear data/factory reset. You should then start with a clean system.
Alright, if you don't mind can you please let me know what steps I can avoid.
I didn't think it was possible to have a rooted .605 but I guess I was wrong.
So my goal should be to get to .605, then root it. Then install roms from there?
On your first post you said you were on .605. I'm assuming that is still the case.
If so, then root it with pete's tool (I think you've already done that).
Install D2bootstrap, then ROM Toolbox and install your rom from there.
I have to be honest, in that I've not used Liberty in a while, nor have I used Rom Toolbox. It shouldn't be a problem, just make sure that the version of Liberty you are using is for the GB kernel. Some of the older versions of Liberty (Which I did use, and like) were for the Froyo kernel (in that case, stay on .340 and do your upgrades).
Make sure you wipe data in recovery after installing the ROM. Lots of 'Boot Loops' are due to not wiping data after flashing a new rom.
Yeah
Yeah I read up on all of that. I actually might not end up going with Liberty. Going to try others like ICX. But before I do any of this I need to get to .605.
No I am not at .605 I believe that's where my phone was before I started all of this.
Right now I am flashing back to 2.3.34
Once I am back up and running there. Can you please recommend the easiest way to get to .605 and that will be my final question.
.605 should update automatic. If not you can disable the updater using titanium backup by freezing system updater.
1. Use petes tools install cwm as well
A. Droid x bootstrap get this
B. Titanium backup. Backup your apps
2. Make a backup using cwm and backup apps with tb
3. Put the rom zip files on the sd card.
4. Reboot to recovery. Reformat system data etc
DO NOT REFORMAT THE SD CARD.
5. Wipe cache davik etc.
6 flash rom. And reboot.
7 run tb for your apps
Should be a smooth and clean install. The roms are already rooted so no need to worry about that. Hope this helps
Sent from my MyTouch 4G Slide using xda premium
We aren't supposed to link to other forums, so expect this link to get removed.
http://rootzwiki.com/showthread.php?399-UPDATED-GUIDE-LINKS-DX-SBF-s
I would point you to a link here, but couldn't find a quick/easy link to what I wanted.
In this list is an SBF file for .602. Since you seem comfortable with doing SBF's, I would just SBF straight to .602 and root it from there.
Don't know much about ICX, but would encourage you to look at the CM7DXGB thread over at Rootzwiki as well.
ohh, well I just went to Settings > About Phone and its auto updating to .605
Am I not going to be able to root it after this update or should it be fine.
HunterT said:
ohh, well I just went to Settings > About Phone and its auto updating to .605
Am I not going to be able to root it after this update or should it be fine.
Click to expand...
Click to collapse
Pete's Root tool should root .605 just fine.
One last thing
As far as Clockwork recovery goes.
Should I always be in the latest version 5.0.2.0 (the blue version)
Or the old version 2.something (the green version)
Why is there 2 version and why would I ever want to flash back to the old version 2.something?
Zaphod-Beeblebrox said:
Pete's Root tool should root .605 just fine.
Click to expand...
Click to collapse
Pete's will work on .605 I did two the other day
Sent from my MyTouch 4G Slide using xda premium
HunterT said:
As far as Clockwork recovery goes.
Should I always be in the latest version 5.0.2.0 (the blue version)
Or the old version 2.something (the green version)
Why is there 2 version and why would I ever want to flash back to the old version 2.something?
Click to expand...
Click to collapse
Couple things most of the updates are to add support fix minor bugs etc.
I run the one from petes all the time I forget which version. I haven't had problems.
On my mt4g slide I had to flash a modified verson of clockwork due to my phone being newer and not as much support
With that said its not a difficult process to get a new recovery image. You would need terminal emulator and root explorer. Couple of great guides on here on how to do so. Also other methods as well.
All in all the ones that pete's give you should suffice. Unless your one of the extreame types of people who want the newest or like messing around.
Just remember backups can make the process and hassle of soft bricking your phone much easier to fix and takes a few mins to do.
Look around the forums lots of great information from the devs, experts, etc
Sent from my MyTouch 4G Slide using xda premium
HunterT said:
As far as Clockwork recovery goes.
Should I always be in the latest version 5.0.2.0 (the blue version)
Or the old version 2.something (the green version)
Why is there 2 version and why would I ever want to flash back to the old version 2.something?
Click to expand...
Click to collapse
The newer version changes the way backups are stored. The new format is smaller and quicker.
Among other issues/bug fixes as mentioned before, but the backup issue is important as the new version will not restore the old style backups.