Database Users

[Q] T mobile HTC HD2 from stick together to upgrade rom code error- help please

I bought T mobile HTC HD2 it was displaying Stick together whenever switched on. Just once it booted normal after a long time but then again it was just displaying Stick together.
I decided to upgared the ROM. It has SPL-2.08.0000
I downloaded the latest ROM from T Mobile 2.13.531.1 and went into boot loader connected USB it dispayed USB (i.e changed from Serial). I started after it was done 8 pct it stopped.
I also tried putting NBH directly into the sd card with leoimg.nbh but it is just displaying "upgrade rom error code"
Please help as what should I do next.
Many thanks

Please help
Any body please help. I am really frustrated now.

shahzadaziz said:
I bought T mobile HTC HD2 it was displaying Stick together whenever switched on. Just once it booted normal after a long time but then again it was just displaying Stick together.
I decided to upgared the ROM. It has SPL-2.08.0000
I downloaded the latest ROM from T Mobile 2.13.531.1 and went into boot loader connected USB it dispayed USB (i.e changed from Serial). I started after it was done 8 pct it stopped.
I also tried putting NBH directly into the sd card with leoimg.nbh but it is just displaying "upgrade rom error code"
Please help as what should I do next.
Many thanks
Click to expand...
Click to collapse
Flash Task29. Then download 3.14 from http://www.t-mobile.com/wmupgrade/ Flash it via USB and see if that does the trick.

Thanks I tried not only thi smany other roms what happens is it starts to flash and then stops at 9 pct with communication lost, then start displaying upgrade rom code error at Boot (down vol key plus power).
I do task 29 then this rom code error thig goes away but I am not able to flash at all.
Help please.

almost did everything
well i have been trying continuously since 8 hours but nothing seems to work. I have HSPL3 and when ever I try to flash any rom (have downloaded tons of roms - lol)
it some time just stucks in begining, some times it stsrts and losses communication with the phone from boot loaded. I even tried butting the RUU_signed.nbh to sd card by naming in LEOimage stuff as it is said in the posts and then did vol down pluspower but it seems like it is not even reading from the sd card.
I am not sure what else can I try. I am able to do task 29 from boot loader. I see tri color screen soI am getting into boot loader but I do not know what the h... is wrong with this device.
If some expert can give me directions from here I will highly appreciate. Thanks

shahzadaziz said:
well i have been trying continuously since 8 hours but nothing seems to work. I have HSPL3 and when ever I try to flash any rom (have downloaded tons of roms - lol)
it some time just stucks in begining, some times it stsrts and losses communication with the phone from boot loaded. I even tried butting the RUU_signed.nbh to sd card by naming in LEOimage stuff as it is said in the posts and then did vol down pluspower but it seems like it is not even reading from the sd card.
I am not sure what else can I try. I am able to do task 29 from boot loader. I see tri color screen soI am getting into boot loader but I do not know what the h... is wrong with this device.
If some expert can give me directions from here I will highly appreciate. Thanks
Click to expand...
Click to collapse
You try flashing it without the microSD card in there just for kicks?

Lready tried. With Micro SD without MicroSD with SIM without SIM. One strange thing is when the RUU is gathering data from Device before starting the flash and where it tells you the old rom and the new rom ver. I do not see any old rom version. Could it be something serious.?

come on experts I have tried what ever i could getting the info from the net. Should I give up on this HTC HD2 and consider by purchase a loss.

The RUU not showing anything for the old ROM version doesn't mean anything. And I would call up HTC and see what they say about warranty status at this point.

Need Nand Flash Dump for HTC HD2 TMOUS
After a lot of time I have contacted a repair shop (after bricking my phone of course). He jtagged and he is also not able to flash into the phone. He advised if we can get hold of a TMOUS (the one which I have and is faulty, 16GB card) nand flash dump then he can try to flash the nand via that dump.
So any one who can give me the nand flash dumpfor tmous htc hd2 16gb mem card.
my email is [email protected]
I will be grateful, as I am not in US so warranty is kinda difficult. Some one sold me this phone over ebay.

Okay do what now? You need a NAND dump of a TMO US HD2? As, a stock 2.13 ROM HD2? What's this about the memory card about?

i have same problem. can not flash.
but will try task29 first.
plz help.

sevmasentyfo said:
i have same problem. can not flash.
but will try task29 first.
plz help.
Click to expand...
Click to collapse
I had this same problem and it is a very easy fix. I rolled back to and original rom. Download the Rom to your Then right click the rom and extract the RUU file.
copy it to your SD card. I couldn't get my 16gb card that came with my HD2 to work doing this so i used my wife's 2gb-4 card. Format the card to fat 32. Rename the extracted RUU file to LEOIMG.nbh my you can download winzip for free to extract the file. The problem is that the phone is set up for fast connection. However you cant change that if the phone wont boot.
let me clean this up a little
1) Download and install winzip
2) Download T-mobile HTC latest update
3) right click update and select extract RUU file
4) rename file to LEOIMG.nbh
5) Format SD card to Fat 32
6) Copy LEOIMG.nbh to SD (I couldnt get my 16gb card to do this)
7) Install in phone and boot
You may notice that i only have a few posts. thats because i an a Noob.
If you search the HD2 ROM development forum for Flashing your First GSM Noobs guide it has almost all the answer and if it doesn't the answers are linked in there somewhere.
Again Im just a noob so if you follow my directions and trash your phone sorry.
Im just trying to help.

chong112193 said:
I had this same problem and it is a very easy fix. I rolled back to and original rom. Download the Rom to your Then right click the rom and extract the RUU file.
copy it to your SD card. I couldn't get my 16gb card that came with my HD2 to work doing this so i used my wife's 2gb-4 card. Format the card to fat 32. Rename the extracted RUU file to LEOIMG.nbh my you can download winzip for free to extract the file. The problem is that the phone is set up for fast connection. However you cant change that if the phone wont boot.
let me clean this up a little
1) Download and install winzip
2) Download T-mobile HTC latest update
3) right click update and select extract RUU file
4) rename file to LEOIMG.nbh
5) Format SD card to Fat 32
6) Copy LEOIMG.nbh to SD (I couldnt get my 16gb card to do this)
7) Install in phone and boot
You may notice that i only have a few posts. thats because i an a Noob.
If you search the HD2 ROM development forum for Flashing your First GSM Noobs guide it has almost all the answer and if it doesn't the answers are linked in there somewhere.
Again Im just a noob so if you follow my directions and trash your phone sorry.
Im just trying to help.
Click to expand...
Click to collapse
can u share which rom u used to update ur hd2

cdma-india said:
can u share which rom u used to update ur hd2
Click to expand...
Click to collapse
I used the latest one put out by T-mobile
T-Mobile_HD2_MR_Software_3.14.531.1

i followed the instruction, put the LeoImg file into 1gb microsd. Booted the phone into bootloader mode but it doesn't do anything. It just stay at "Upgrade roM code error please try again"
PB81120 SS-B3
SL-3.03.0000 XE

abcchoier said:
i followed the instruction, put the LeoImg file into 1gb microsd. Booted the phone into bootloader mode but it doesn't do anything. It just stay at "Upgrade roM code error please try again"
PB81120 SS-B3
SL-3.03.0000 XE
Click to expand...
Click to collapse
Thats exactly what i have to,,,I'm very stuck now,anyone got any ideas on how to fix this?
Thanks

[Q] Help PLS my hd2 is blanc dead!!!

Hi everyone
I think I killed my hd2 today ( I wanted to have a android, but first I needed HSPL2 and then MAGLDR. So I install HSPL2 this was succesfull but when I install a MAGLDR1.13 my phone should be black with flash..... but it gets white with this HTC logo and thats it, I can't turn it on or off, I can't connect to PC I can't do nothing!!!! can anybody help me. Is any chance?!

agnes12 said:
Hi everyone
I think I killed my hd2 today ( I wanted to have a android, but first I needed HSPL2 and then MAGLDR. So I install HSPL2 this was succesfull but when I install a MAGLDR1.13 my phone should be black with flash..... but it gets white with this HTC logo and thats it, I can't turn it on or off, I can't connect to PC I can't do nothing!!!! can anybody help me. Is any chance?!
Click to expand...
Click to collapse
First off what model of HD2 do you have, is it the Eroupean or T-Mobile US model? What version of HSPL did you install? You need to install HSPL 2.08 to install MAGLD cause MAGLD does not support any higher version of HSPL. If you have installed HSPL 2.08 then it might .e best to just revert your HD2 back to stock and started all over again. To revert back to stock download the latest official update for you HD2. You will have to go to your Carriers website and find the latest update if the update is not on your carriers website then go to HTC.com and look for it there. Once you have downloaded the correct update ROM for your HD2 you can either try to flash it via your computer with your HD2 connected via USB cable or flash it via your SD card. To use your computer while your HD2 is off hold down the volume down button and the power(end button) until you see the tri color screen, this is the bootloader mode. Wait until the serial in the bottom white bar changes to USB and then run the .exe or RUU to flash the ROM. If you can not get the USB to show in the white bar at the bottom for some reason look in the folder created from unzipping/exstracting the zip file that the update comes in and look for something like "RUU_signed.nbh" it might not read exactly like that but it will end in "nbh". Copy this to the root of your SD card and rename it exactly like this "LEOIMG.nbh", this is the only file name the bootloader will except. You may also need to use a micro SD card reader to copy this to your SD card. when you have the file coppied and renamed on your SD card while your HD2 is off hold the volume button and the power(end button) down until you see the bootloader and as soon as it says searching on the screen let go of the volume down button and the ROM should flash this might take a little longer than flashing via your computer so don't freak out if the screen stays black for a while or if the progress bar hangs occassionaly during the flashing. Also if this does not work visit the thread on flashing via SD card cause there is other variables to flashing via SD card like size, class and the way your SD card is formatted. Here is a link to the thread Also after you have flashed the official update ROM you will no longer have HSPL so you will have to reflash it befor trying to teflash MAGLD.

If he has 2.08, their is no need to do it all over again.

mattfmartin said:
If he has 2.08, their is no need to do it all over again.
Click to expand...
Click to collapse
Yesthey could try to reflash MAGLD by manualy putting the HD2 into bootloader. But from what thier post says.
I can't turn it on or off, I can't connect to PC I can't do nothing!!!!
Click to expand...
Click to collapse
So maybe reverting back to stock and starting all over again would be best.

Thank a lot! I try all of this but my phone stays with this colours and nothing is going on

I have a european model hd2 and the HSPL was 2

agnes12 said:
Thank a lot! I try all of this but my phone stays with this colours and nothing is going on
Click to expand...
Click to collapse
If your HD2 will still go to the bootloader than it should be savable. If you tried to flash via your SD card and nothing then either you did not release the volume down button fat enough when searching appeared on the phone screen. Or your SD card is either not compatible to use for flashing, it is not the right class of SD card to flash with, or your SD card is not formatted correctly. I suggest you go to the link I posted in my first post here and read through the thread it will tell you how to solve any of these problems and you can post there in that thread also some one there can probably give you more advice.
If you tried to flash via you computer and USB cable then you have to have it say USB in the bottom white bar of the bootloader, other wise it will not flash the ROM. Also you have to make sure you run the exe or RUU right to flash from your computer.
I hope you can get your HD2 working again. Oh yeah you never said what model HD2 you have.
Also what carrier are you with?

OMG I did it!! hehehe thanks again!! i connect phone via usb to my pc when I had this colours and then I instal again on phone ROM and it works!!!!!!!!!
ufffffffff

agnes12 said:
OMG I did it!! hehehe thanks again!! i connect phone via usb to my pc when I had this colours and then I instal again on phone ROM and it works!!!!!!!!!
ufffffffff
Click to expand...
Click to collapse
Glad to know you got it fixed. Just be carful and follow all instructions exactly if you want to install a NAND Andriod ROM. And make sure to select HSPL 2.08 when you reflash HSPL to your HD2.

I will be installing android ones again tonight, fingers crossed this time will be ok, but first I need to find a rom oldest then 3.14

Bricked or?

Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?

Ok try this, turn the phone off then hold the low volume botton n the power botton at the same time, n if it takes u to the bootloader then u r good, just search on how to install a rom of ur choise, good luck
Sent from my HTC HD2 using XDA Premium App

froibet said:
Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?
Click to expand...
Click to collapse
Well the fact that it will even turn on means it is not bricked. A bricked HD2 will not even turn on the most it will do is flash tihe led light and vibrait a couple of times.
Follow the instructions of the above post and pull up bootloader, if bootloader comes up you can save the HD2. Depending on if you want to flash a official srock ROM or a custom ROM to the HD2 will dictate your next step.
If you want a official stock ROM then just download and flash the official update from T-Mobile.com just type in HTC HD2 update in the search box on the home page and you will find it. You will have to enter the IMEI number to download it wich you can find this number behind the battery. To flash it connect the HD2 to a computer via USB cable while in bootloader and wait for the serial in the white bar at the bottom of the bootloader screen to change to USB and the computer to show it recognizes the HD2 then run the update utility and follow all the on screen instructions.
If you want to flash a custom ROM as in custom Windows Mobile, NAND Andriod ROM, or Windows Phone 7 ROM then you will have to flash HSPL to the HD2. Download HSPL4 and flash 2.08 HSPL if hou want to flash a NAND Andriod ROM as MAGLDR only supports 2.08 HSPL. Or a Windows Phone 7 Rom, or flash 3.03 if you just want to flash a custom Windows Mobile ROM.
Now if you want a NAND Andriod ROM or Windows Phone 7 you will have to download MAGLDR and flash it to the HD2.
If you want a custom Windows Mobile ROM download the ROM of your choice and fladh it using the .exe or RUU wich ever one the ROM has. Note do all flashing of what I have previously mentioned via the method I mentioned before.
If you are wanting to flash a NAND Andriod ROM or Windows Phone 7 ROM then download the ROM of your coice and flash it using MAGLDR and the instructions of the ROM developer in thread for the ROM.
Now this is very important. I see from the picture you have a T-Mobile(TMOUS) HD2 so no matter what you do, do not flash a ROM with a radio version that reads like these 2.04.50.xx, 2.05.50.xx, or any radio that is x.xx.51.xx they will brick/kill a TMOUS HD2.

froibet said:
Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?
Click to expand...
Click to collapse
I would recommend flashing a stock T-Mobile ROM, since that appears to be the flavor of the phone. This will install the correct radio. Once the phone is working, continue as per normal for flashing the ROM. You will have to reinstall hardspl.

thanks for the info guys! i really appreciate the support!
it seems like it won't read the USB... is the port busted?

froibet said:
thanks for the info guys! i really appreciate the support!
it seems like it won't read the USB... is the port busted?
Click to expand...
Click to collapse
try this:
1) download your stock ROM.
2) put it on your SD card via a card reader, you want an .NBH file.
3) rename the file LEOIMG.NBH
4) make sure the phone is off, make sure your SD card is back in your phone.
5) hold down and power
6) it should go to a tri-color screen and say something about flashing the image, hit power to confirm
7) it should flash no problems.
MAKE SURE YOU DOWNLOAD THE CORRECT ROM FOR A TMOBILE US HD2

Have exactly the same problem with my friends phone.
Its a TMOUS and sticks on the same boot screen.
He screwed it up when trying to install Android NAND on it.
I can enter bootloader And I have managed to get rid of MAGLDR and CWM.
I have HSPL 3.03 installed on it, but when I try to install the latest ROM from TMOUS it fails at 8% and tells me that
'ERROR 290: INVALID COMMAND
This update Utility cannot be used for your PDA phone. Please check your update utility'
Tried copying the relevant file to the SD card and renaming it leoimg.nbh but the install fails HERE aswell with the error:
"RADIO_V2 - RSA Fail"
I managed to install an energyrom onto it, but it wouldnt go past the initial boot screen
Any help appreciated

Boradan said:
Have exactly the same problem with my friends phone.
Its a TMOUS and sticks on the same boot screen.
He screwed it up when trying to install Android NAND on it.
I can enter bootloader And I have managed to get rid of MAGLDR and CWM.
I have HSPL 3.03 installed on it, but when I try to install the latest ROM from TMOUS it fails at 8% and tells me that
'ERROR 290: INVALID COMMAND
This update Utility cannot be used for your PDA phone. Please check your update utility'
Tried copying the relevant file to the SD card and renaming it leoimg.nbh but the install fails HERE aswell with the error:
"RADIO_V2 - RSA Fail"
I managed to install an energyrom onto it, but it wouldnt go past the initial boot screen
Any help appreciated
Click to expand...
Click to collapse
Try running a Task 29 on your friends HD2. This willtotally clean out the NAND memory of the HD2 and reformat it, kinda sounds like that is what is needed to be done. He may have messed the NAND memory format up when he was trying to install the Andriod. You will have to reflash a Windows Mobile ROM after you run the Task 29 as it will not ha e a ROM on the phone then. You will not have to reflash HSPL cause it will not remove it.

It seems that the problem is RADIO related. I can task 29, and I can install The latest Energyrom, but I CANT install a radio.
There is no radio ON the phone at the minute it seems. When I try to do a radio install, it asks me if I want to go from version ' ' to the update I am using.
None of the installers see a radio on the phone, and trying to install the radio always fails at 96%. This would seem to be the same if I try to install the official TMOUS latest ROM with radio from SD Card. It fails at the radio install part.......
Maybe time for a new thread for this one.......

orangekid said:
try this:
1) download your stock ROM.
2) put it on your SD card via a card reader, you want an .NBH file.
3) rename the file LEOIMG.NBH
4) make sure the phone is off, make sure your SD card is back in your phone.
5) hold down and power
6) it should go to a tri-color screen and say something about flashing the image, hit power to confirm
7) it should flash no problems.
MAKE SURE YOU DOWNLOAD THE CORRECT ROM FOR A TMOBILE US HD2
Click to expand...
Click to collapse
i can do all this without connecting to the PC? just flashes from the SD card???

froibet said:
i can do all this without connecting to the PC? just flashes from the SD card???
Click to expand...
Click to collapse
Yes you can flash radio and ROM from your SD card. Here is a link to the thread on doing this gives step by step, check it out.

[Q] PLEASE HELP NEEDED - Beginner

I am trying to re-flash WIN6.5 with no luck
1. I installed HSPL2.8 and MAGDLR 1.13 with the hope of trying CWM and loading Android to NAND.
2. I used ClockworkMod Recovery to install zip from SDCard using TyphooN_CM7_v2.8.0-cLK.zip
3. Progress looked like install was completed
4. When re-booting, got message NAND Kernel open failed
I TRIED TO REFLASH MY WIN6.5 from the RED/GREEN/BLUE bootloader menu but now I do not get a valid connection via USB
The Bootloader screen shows 'USB' at the bottom and when I click the Custom_RUU.exe I used to load my Custom Win6.5 ROM I get the first screen showing the update button etc. but when I press update, the progress bar appears on the PC and my HD2 but no update actually occurs
FINALLY AFTER A FEW MINUTES I GET A 'RECOVERY SCREEN' and update failed message.
CAN SOMEONE PLEASE HELP???? I will gladly 'Donate' some beer money

when you turn on your phone hold the red power button until the magldr screen pops up then go to flash to usb then download the stock rom for win 6.5 it should be in the win6.5 development threads on XDA the rom should be a .exe file, run the file once u establish a usb connection with the computer. if you can't get on the magldr screen, try going to the boot screen ( the one with the color stripes) and re-flash your magldr or the hspl4. as long as you can get into the magldr boot screen then you should be able to flash android or winmo. hope that helps.

Phongsta said:
when you turn on your phone hold the red power button until the magldr screen pops up then go to flash to usb then download the stock rom for win 6.5 it should be in the win6.5 development threads on XDA the rom should be a .exe file, run the file once u establish a usb connection with the computer. if you can't get on the magldr screen, try going to the boot screen ( the one with the color stripes) and re-flash your magldr or the hspl4. as long as you can get into the magldr boot screen then you should be able to flash android or winmo. hope that helps.
Click to expand...
Click to collapse
This couldn't be more wrong lol. You can't flash WinMo ROM's from MAGLDR, only WP7 and Android.
Anyway why don't you just try flash a different Android ROM? Even one that has a daf and not a .zip that you have through CWM.
If you do want to go back to stock though, download your stock ROM from the HTC site or T-mobile depending on which phone you have (T-mobile say t-mobile at the top and has red and green call/end buttons). Then once you've downloaded it, rename the file to .zip (should be .exe by default) then using WinRar open the file and look for a file that ends with '.nbh' in WinRar. Once you've found that file just extract it to wherever you want and rename it to 'LEOIMG.nbh'. Once you've done that, place it on the root of your SD card, then POP your SD card back in to your HD2, boot to HSPL (tri colour) and you'll come to a screen which will allow you to flash the ROM from SD and you're done.
PS. you need a 4GB or smaller SD card to flash it.
Good luck.
Sent from my HTC Vision using XDA App

Skellyyy said:
This couldn't be more wrong lol. You can't flash WinMo ROM's from MAGLDR, only WP7 and Android.
Anyway why don't you just try flash a different Android ROM? Even one that has a daf and not a .zip that you have through CWM.
If you do want to go back to stock though, download your stock ROM from the HTC site or T-mobile depending on which phone you have (T-mobile say t-mobile at the top and has red and green call/end buttons). Then once you've downloaded it, rename the file to .zip (should be .exe by default) then using WinRar open the file and look for a file that ends with '.nbh' in WinRar. Once you've found that file just extract it to wherever you want and rename it to 'LEOIMG.nbh'. Once you've done that, place it on the root of your SD card, then POP your SD card back in to your HD2, boot to HSPL (tri colour) and you'll come to a screen which will allow you to flash the ROM from SD and you're done.
PS. you need a 4GB or smaller SD card to flash it.
Good luck.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I think this should work for you ,,, it always work for me this way

mburian said:
I am trying to re-flash WIN6.5 with no luck
1. I installed HSPL2.8 and MAGDLR 1.13 with the hope of trying CWM and loading Android to NAND.
2. I used ClockworkMod Recovery to install zip from SDCard using TyphooN_CM7_v2.8.0-cLK.zip
3. Progress looked like install was completed
4. When re-booting, got message NAND Kernel open failed
I TRIED TO REFLASH MY WIN6.5 from the RED/GREEN/BLUE bootloader menu but now I do not get a valid connection via USB
The Bootloader screen shows 'USB' at the bottom and when I click the Custom_RUU.exe I used to load my Custom Win6.5 ROM I get the first screen showing the update button etc. but when I press update, the progress bar appears on the PC and my HD2 but no update actually occurs
FINALLY AFTER A FEW MINUTES I GET A 'RECOVERY SCREEN' and update failed message.
CAN SOMEONE PLEASE HELP???? I will gladly 'Donate' some beer money
Click to expand...
Click to collapse
WOW!! for a newbie, u sure know how to go for d big guns ...Anyway according to your post, i tk it u downloaded the "TyphooN_CM7_v2.8.0-cLK.zip" file ryt?...Well in [cLK/MAGLDR]TyphooN CyanogenMod 7 RC2+ v2.8.4's thread, it tells you there are two ways to install this particular build...I'm guessing u tried installing the "TyphooN_CM7_v2.8.0-cLK.zip" thru MAGLDR-CWM instead of following Charmacas's cLk tutorial.
So in d spirit of learning, Start d whole process again (Task 29, etc), go back to the build's thread (link above), choose which method is most comfortable 2 u ( i recommend MAGLDR) and re-download the latest & APPROPRIATE build for the process or just download from the links below....
MAGLDR Method.
cLK Method.
Nw abt reflashing WinMO, U've got HSPL installed so u r good...Just perform a Task 29 (dis wipes ur phone clean, leaving ur HSPL & radio intact) from the bootloader screen...Should usb fail? unplug n try another usb port on your pc...Then simply flash ur desired WinMo ROM.
This my friend is what happens when dev's instructions are not followed...Do read, understand n be more careful nxt time...Donate to the devs if i helped u.

All done !
voncrane said:
WOW!! for a newbie, u sure know how to go for d big guns ...Anyway according to your post, i tk it u downloaded the "TyphooN_CM7_v2.8.0-cLK.zip" file ryt?...Well in [cLK/MAGLDR]TyphooN CyanogenMod 7 RC2+ v2.8.4's thread, it tells you there are two ways to install this particular build...I'm guessing u tried installing the "TyphooN_CM7_v2.8.0-cLK.zip" thru MAGLDR-CWM instead of following Charmacas's cLk tutorial.
So in d spirit of learning, Start d whole process again (Task 29, etc), go back to the build's thread (link above), choose which method is most comfortable 2 u ( i recommend MAGLDR) and re-download the latest & APPROPRIATE build for the process or just download from the links below....
MAGLDR Method.
cLK Method.
Nw abt reflashing WinMO, U've got HSPL installed so u r good...Just perform a Task 29 (dis wipes ur phone clean, leaving ur HSPL & radio intact) from the bootloader screen...Should usb fail? unplug n try another usb port on your pc...Then simply flash ur desired WinMo ROM.
This my friend is what happens when dev's instructions are not followed...Do read, understand n be more careful nxt time...Donate to the devs if i helped u.
Click to expand...
Click to collapse
Thanks m8... I figured out my problem... HAVE TO RUN EVERYTHING 'AS ADMINISTRATOR' ... anyway... won't make that mistake again...
Thanks Everyone for all your help!!!!

mburian said:
Thanks m8... I figured out my problem... HAVE TO RUN EVERYTHING 'AS ADMINISTRATOR' ... anyway... won't make that mistake again...
Thanks Everyone for all your help!!!!
Click to expand...
Click to collapse
Glad 2 help, just hit d thanks button nxt time....Enjoy ur device.

mburian said:
I am trying to re-flash WIN6.5 with no luck
1. I installed HSPL2.8 and MAGDLR 1.13 with the hope of trying CWM and loading Android to NAND.
2. I used ClockworkMod Recovery to install zip from SDCard using TyphooN_CM7_v2.8.0-cLK.zip
3. Progress looked like install was completed
4. When re-booting, got message NAND Kernel open failed
I TRIED TO REFLASH MY WIN6.5 from the RED/GREEN/BLUE bootloader menu but now I do not get a valid connection via USB
The Bootloader screen shows 'USB' at the bottom and when I click the Custom_RUU.exe I used to load my Custom Win6.5 ROM I get the first screen showing the update button etc. but when I press update, the progress bar appears on the PC and my HD2 but no update actually occurs
FINALLY AFTER A FEW MINUTES I GET A 'RECOVERY SCREEN' and update failed message.
CAN SOMEONE PLEASE HELP???? I will gladly 'Donate' some beer money
Click to expand...
Click to collapse
you must istall zip for MAGLDR not for CLK!!

mburian said:
I am trying to re-flash WIN6.5 with no luck
1. I installed HSPL2.8 and MAGDLR 1.13 with the hope of trying CWM and loading Android to NAND.
2. I used ClockworkMod Recovery to install zip from SDCard using TyphooN_CM7_v2.8.0-cLK.zip
3. Progress looked like install was completed
4. When re-booting, got message NAND Kernel open failed
I TRIED TO REFLASH MY WIN6.5 from the RED/GREEN/BLUE bootloader menu but now I do not get a valid connection via USB
The Bootloader screen shows 'USB' at the bottom and when I click the Custom_RUU.exe I used to load my Custom Win6.5 ROM I get the first screen showing the update button etc. but when I press update, the progress bar appears on the PC and my HD2 but no update actually occurs
FINALLY AFTER A FEW MINUTES I GET A 'RECOVERY SCREEN' and update failed message.
CAN SOMEONE PLEASE HELP???? I will gladly 'Donate' some beer money
Click to expand...
Click to collapse
you must istall romzip for MAGLDR not for CLK!!

Need help urgently, HTC HD2 stuck wiped :(

Hey guys
So, I finally managed to get on my PC to try and install WP7, but I think I failed.
I'm going to list what I did below.
1. Booted phone into bootloader (has Android installed from previous owner)
2. Installed Activesync on PC
3. Went into HD2ToolKit, did a Task29, then flashed MAGLDR 1.13 (2.08 HSPL already installed)
4. In MAGLDR, I went to Services and did Last24NAND and Wipe Sd MBR
5. Went and selected USB Flasher
6. Opened DWI.exe from YukiBackToTheFuture folder, which flashed fine.
7. Went to boot into it, but it hangs at splash screen.
What can I do? I need help urgently, because I need this phone for tomorrow. I don't know how to reinstall Android, and I have no access to a PC until Saturday.
Helpful points:
[Highlight=red]HTC HD2 European Model
2.08 HSPL
Not sure what radio, dead pixels at the area in bootloader so I can't see it -.-[/Highlight]
Help! 
CJ

Click on the guide in my Sig and red up on the old method of MAGLDR booting Clockwork Mod Recovery from SD card. Just go to the section on Clockwork Mod Recovery. You will also have to down load a .zip of a android ROM on to another SD card as WP7 formats your SD card with a RAID format so it will be usless until you do a low level format and then a fat 32 format. You can use another phone if someone will let you to download a Android ROM, use WiFi if possible so you do not eat up your friends data. Make sure you move the ROM to the root of the SD card, Leningrad it is not in a folder. Place the two files for Clockwork mode on the root of the SD card too. Boot your phone into MAGLDR by holding down the home button while you boot your HD2. When MAGLDR is booted up place the SD card in your HD2 and then select AD SD and it will boot Clockwork Mod Recovery. Then select install from SD card, select from SD card, and then find the ROM and select it. Let the ROM flash and then reboot your HD2 and it should boot into the Android ROM.

CJJames said:
Not sure what radio, dead pixels at the area in bootloader so I can't see it
Click to expand...
Click to collapse
please explain what you mean? do you actually mean dead pixels, or a messed up part of teh bootloader text? (which can be a very bad sign)

samsamuel said:
please explain what you mean? do you actually mean dead pixels, or a messed up part of teh bootloader text? (which can be a very bad sign)
Click to expand...
Click to collapse
LOL it's the dead pixels on the LCD that are right where the radio text happens to be -.-

CJJames said:
LOL it's the dead pixels on the LCD that are right where the radio text happens to be -.-
Click to expand...
Click to collapse
Main reason I asked is because you can't see radio version in bootloader.