Help please. I'm basically in a boot loop with no recovery. Idk what I should do or if its possible to make a warranty claim.
Hey guys I'm in a boot loop of some kind. I'm not an advanced user of this stuff but idk what to do at this point. So this is the situation. I have a X10a from at&t and its rooted with busybox and freex10 recovery or whatever. I had a default 2.1 ROM and flashed the offline recharging thing. My phone seemed to work fine but then my battery died out. For a while I've had recharging problems with my phone either my cable is messed up or the usb port. So anyways after it died out I tried to recharge but I was in the 3x red flashing light problem and accidentally broke my charger cord, but continuing I borrowed my friends cord and still had problems so knowing my usb port is kinda broken i just left it there. After about 2 hours my phone majestically starts up lol. So I decided I wanted to put on xrecovery just incase and My computer wont read my phone. I try everything from takeing out my sd card to restarting my computer to reinstalling pc companion like 20 times. So I tried a factory reset through the phone settings and ended up where i currently am in a boot loop. It turns on and does the sony ericsson thing then does the boot animation then my phone vibrates and the screen darkens and my buttons are lit up. It has been like this for about 30 mins so far. I tried restarting my phone by taking out the battery and taking out the sd card/sim card.
Sorry for this being long but this is my situation. Could you please help me out? I Don't know if I can do a warranty claim or anything I'm desperate so please any help would be greatly appreciated. Thanks in advance. Also if there is anymore information you need please just ask.
use flashtool and flash a rooted generic 2.1 rom
install xrecovery
restore a back up
My computer can't read my phone. How can I fix that? It can go into flash mode but nothing shows up not even in the /:c/ area
if your phone is in flash mode, it's fine. start flashtool, click "flash", select the rom you want to flash, put phone in flash mode (turn off, hold back button while plugging phone in, wait for green light), click ok, let it do it's thing.
Even when i go into flash mode it doesn't work. It goes in flash mode while it searches then after a while the x10 leaves flash mode. Tbh I think its my cable though. Any idea where to get an official one that will ship to hawaii?
You may be missing the drivers.
Install SEUS "Sony Erricson Update Service" from the sony erricson website.
And let it detect your phone at least once.
You can also use it to restore your phone.
Good luck.
I got all the drivers. I'm just gonna buy a Xperia Play and see if i can fix my x10 and sell it or somthing. But thanks for all the help guys
Go to flashtool, press on flash select firmware. Then after it asks put your x10 connected without your battery. Put your battery in and it should flash.
cloud911208 said:
Even when i go into flash mode it doesn't work. It goes in flash mode while it searches then after a while the x10 leaves flash mode. Tbh I think its my cable though. Any idea where to get an official one that will ship to hawaii?
Click to expand...
Click to collapse
any mini usb cable should work. i use the cable from my bt device for my phone.
If the x10 goes out of flashmode, try to hold in the back button under the whole flashing progress.
cloud911208 said:
Even when i go into flash mode it doesn't work. It goes in flash mode while it searches then after a while the x10 leaves flash mode. Tbh I think its my cable though. Any idea where to get an official one that will ship to hawaii?
Click to expand...
Click to collapse
Any electronics store has the cables ranging from $5-$30 depending on what your looking for in quality.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
Well thanks for the help. I'm gonna try use it on a different computer and see if it still works. Wish me luck.
Related
Last year(late 2010, maybe mid November), I rooted my phone and flashed recovery with no problem s at all. Some time after that I added Apps2SD and that went smoothly with no problems for about a week. I purchased an 8 GB SD Card for more storage room and after I partitioned it and switched the cards my phone started acting up so i rebooted it. After that I was stuck in a boot loop, so i tried to flash it back to stock but it wouldn't take to it no matter how I tried, whether it be through recovery or SW Update. So then I tried Odin Multi loader(cant remember which version but at the time I made sure it was the one meant for the Intercept) after I flashed it with the Stock through Odin, the phone bricked. Now it will not turn on in any way(recovery or other) the only thing it does do is vibrate when I plug it in to a computer, and it will occasionally show battery life through the touch screen and keyboard buttons by lighting them, but as soon as the it is unplugged it is a brick. I see the little bit of functionality as a little bit of to be able to fix this phone whether through ADB or another function but I desperately need help with this. Can someone please help me fix this phone?
note: I currently have a Samsung Transform as my main phone so if the Intercept can't be helped then it's not that big of a problem.
I have the same problem! Please help!
When you root a phone you put the rom, and recovery onto the sd card. changing sd cards disrupts this process. Put the old sd card in and tell me what happens.
The phone doesnt come on at all
see if you can get it into download mode with the battery out.
Pull battery
connect to computer with usb
vol down + camera + end
If you get into download mode this way flash the stock.tar using SWUpdater.
Nope, it doesnt work, thx though
Ok I've got the same problem with my intercept as well, So i just like to add (maybe its just me) that when i plug my phone to the computer the phone shows that its still functions right (without the screen on), I'm able to make calls, and receive them as well (with the touch of the answer button) but just the screen doesn't turn on, AT ALL!, so KJON i don't know if your having the same problem as me but I'm just a noob and i wouldn't know what to do. But there's some ammo if you need it.
I HAVE THE SAME PROBLEM! i dont even know where /sdcard/sdx/zip/ is!
My phone is also a samsung transform and not and intercept and whenever i press vol down+ Power, only the function buttons at the bottoms light up but not the screen
i am a noob.
help?
noooooob here...i didnt wanna start another thread since i have this same problem, so i hope someone reads this..
couple days ago i bricked my sprint intercept i was using SWu and forgot to take the Binary files for the Moment out so now i cant get my phone to DL mode, ive been searching since saturday night and have tried every Button combo posted and nothing, my phone will not turn on and ofcourse it isnt recognized by my pc BUT, ive noticed that only when its plugged in to the computer after trying to power it up several times it´ll vibrate then the 4 touch buttons will react to either the call or end button, also it makes the low battery sound and if i press the camera button it makes the volume sound but i CANT get to download mode, can i bring my phone back or is it done with? help please! and thanks in advance...
well, i would say boot into rrecovery by making the phone off either power button, or remove and replace battery.
next, you will need to press and hold in order: power/end call, call, and volume down.. this should boot recovery mode.
lastly, use the red scroll device to go to reset facory defaults or factory recovery, use common sense while looking. select with clicking and use arrow back button to go back to recovery main, then reboot to system. easy as pie.
Have you tried ODIN or ADB?
I have flashed the Intercept numerous times, soft bricked more than once, I was always able to recover using either the stock bootloader, CWM recovery, or flashing the ROM/Kernel directly using ODIN or ADB.
If you are still having these issues drop me a line and I'll gather some links together that should get you back up and running.
If the phone will not boot at all, even with a charged battery, I would definately try contacting Virgin Mobile and escalating the issue. I've had plenty of luck replacing devices claiming that the device just dropped dead without notice. They are usually good about sending out a replacement phone, and on rare occasions even giving you an upgraded unit if they are out of stock.
Good luck!
Did you use Odin or the swupdater?
Bug difference. Sounds like there's a missing boot loader.
Sent from my SPH-L710 using xda app-developers app
Hi, did you guys fix your bricked phones? Today I have bricked my Samsung transform (bad flash went with SW upgrade.
Only vibrates sometimes and the buttons flash a little, but no boot at all. Is there any chance to fix it? even with Jtag?
regards
Need help tried to get into flashboot mode now the phone is bugging out. all I did was got root and went perfect then I'm trying to use the flash too program and flash a rom or something. and it was telling me to connect into flashboot mode then press the ok button on the PC to start the program couldn't connect. so I kept trying and before the phone didn't want to get into any type of recovery or flash mode now the phone if I turn it on without any USB in the phone shows the Sony sign sits there and reboots by its self. or if I just plug it into my charger I freaking still get a green light and its stuck in the flash mode how can I get it to just turn on normal so I can have a working phone. Sorry for the long story its just odd I've never had a phone where if you pressed a few buttons and the PC never even saw the phone that its freaking out like I dumped a bomb in it. but nothing was wrong I had rooted perfect and turned it off a ton of time before trying to get into flashboot mode. Thanks for any advice everyone
Sent from my Nexus S using Tapatalk
i got the same issue by you so the only solution i get is to reflash generic 2.1 with flash tool and root xrec ect..and reboot with the charger plug and let's the phone charge reboot again with cable plug and when the green light disappear on boot then flash your rom with xrec. so remember don't flash with flashtool when you in xrec this made a autoflash mode and stay in flash all the time and eat your battery and maybe damage the phone if you stay in flash for long time.
jespere que je tai aider ciao
freex10.mixdarkfroshcyanthem.bb58
Hey so you did end up getting out of this mode when it happened to you? And Im getting what your say but im sorta confused so I had android 1.6 and just finished rooting and was trying to put the phone in flashboot mode. Then I downloaded the flash tool and I moves to recovery files the the data/local or where ever they where supposed to be. Then tried to get into recovery but couldn't so I downloaded a rom or generic firmware for my type of phone. but when it said to put in flash mode by just holding the back button and put the plug in and press the ok button it wouldn't find the phone. That's when my problem began I tried to just take the battery out load normal to restart but it then just gets to the Sony sign and then turns off. The software didn't even touch the phone its getting annoying cuz I just want it to turn back on. Can you or someone post a like to where I should go with those directions you posted please
Sent from my Nexus S using Tapatalk
So i was trying the new beta for PA android and when i was on recovery wiping as usual, the wipe process just froze there for a while, i decided to leave it till it worked again but to no avail it didnt budge at all, so i commited the ultimate sin, and powered it off by holding the power button...
when i tried again tu turn it on the tablet would go thru the google with the padlock screen and then show me a black screen with a little logo of clockworkmod and a version number below, the screen itself has no use since no matter what button i press it does nothing, other than that the tablet keeps rebooting after that.
when i try any combination of buttons to access either the real recovery or the bootloader the tablet just plain ignores that im trying to turn it on, just doesnt work, it just turns on if im not pressing anything besides the power button.
to sum up to all my problems i would love to keep trying and see if at anypoint it will turn to bootloader, i havent seen the notification of the tablet being charged... meaning that i dont know if it has enough battery to last me the remaning ideas i had.
So in a nutshell
-no bootloader
-no fastboot
-no recovery
-cant tell if battery or not
Please if anyone knows how to fix or at least get me to a bootloader i would fix everything else, but i really need the guidance here
Have you tried another charger and cable? A simple idea, but not one to over look.
Without bootloader menu or recovery, not much you can do. I'd work on getting into one of those first. Not much you can do until then.
Osivanlou said:
So i was trying the new beta for PA android and when i was on recovery wiping as usual, the wipe process just froze there for a while, i decided to leave it till it worked again but to no avail it didnt budge at all, so i commited the ultimate sin, and powered it off by holding the power button...
when i tried again tu turn it on the tablet would go thru the google with the padlock screen and then show me a black screen with a little logo of clockworkmod and a version number below, the screen itself has no use since no matter what button i press it does nothing, other than that the tablet keeps rebooting after that.
Click to expand...
Click to collapse
Are you able to get adb to recognize the device with "adb devices"?
KJ said:
Have you tried another charger and cable? A simple idea, but not one to over look.
Without bootloader menu or recovery, not much you can do. I'd work on getting into one of those first. Not much you can do until then.
Click to expand...
Click to collapse
Yeah ive tried 4 other chargers, and nothing new, i know that the os itself takes care of the charging as does the recovery in some cases, but since i have non i dont know if its gonna charge at all or not and trying doesnt sound really appealing since i should save battery in case theres a solution and needs battery power
but thanks for the answer
[email protected] said:
Are you able to get adb to recognize the device with "adb devices"?
Click to expand...
Click to collapse
Dont really know how to check, i mean i could get into the tools and try the command Adb Devices but how should i even begin to test? i mean shouldnt i be in a adb static platform on the device? if i try to get into bootloader it just doesnt turn on, and when it does it goes straight to the black screen with the clockworkmod symbol and numbers
Thanks for the answer
Osivanlou said:
Dont really know how to check, i mean i could get into the tools and try the command Adb Devices but how should i even begin to test? i mean shouldnt i be in a adb static platform on the device? if i try to get into bootloader it just doesnt turn on, and when it does it goes straight to the black screen with the clockworkmod symbol and numbers
Thanks for the answer
Click to expand...
Click to collapse
if you have enough battery and can get pc to see is thru adb. you may be able to fastboot a new rom onto the device. You can from pc Request device to go into bootloader or fast boot from the PC..
This is your only shot.. I Would suggest borrow a friends Nexus 7 Full Battery . If you do not know how to do any of this . Use skips root kit and use the unbrick or factory reset. it will force your device into fast boot and flash a new rom.
Good Luck
erica_renee said:
if you have enough battery and can get pc to see is thru adb. you may be able to fastboot a new rom onto the device. You can from pc Request device to go into bootloader or fast boot from the PC..
This is your only shot.. I Would suggest borrow a friends Nexus 7 Full Battery . If you do not know how to do any of this . Use skips root kit and use the unbrick or factory reset. it will force your device into fast boot and flash a new rom.
Good Luck
Click to expand...
Click to collapse
yeh i know how to use the skip toolkit, yet i hope i have enough battery for the test, because the only friend that i know owns a nexus 7 left the country a few months back, so the battery sounds like its gonna be hard to get. Anyways, as u were saying theres a posibility that while the tablet is rebooting and rebooting it might be able to be found on the adb devices? and use the fastboot, cuz if thats true u would be the hero ive been waiting for...
imma check and tell u later,
thanks for the answer
HEllo everyone,
I have a gt-I9505 S4 which doesnt boot anymore and sometimes it doesnt even open the download screen where you go with power + volume down + home key.
When it opens the download more pc doesnt recognize it. I have installed odin and usb drivers. I have tested the cable and eveything with a note 3 download mode, they work.
I have wiped cache (when it lets to load into that screen), i have factory reseted as well. Still the same.
IS there any advice that you guys can give ?
Thanks in advance
Define "doesn't boot".
Does it hang, does it turn off during boot? Define it.
You see the gt-I950 logo at the beginning and sometimes the samsung logo where it plays the sound.
Doesnt go further than that.
Start again, Odin, flash stock.
doesnt get detected by PC when i plug the usb
You see the gt-I950 logo at the beginning and sometimes the samsung logo where it plays the sound.
Doesnt go further than that. Screen gets dark and it get pretty hot after a while
Have you tried it on a different PC?
I will try and let you know
GDReaper said:
Have you tried it on a different PC?
Click to expand...
Click to collapse
Yes just tried and PC doesnt even give the sound of usb being plugged. On both computers
agassparkle said:
Yes just tried and PC doesnt even give the sound of usb being plugged. On both computers
Click to expand...
Click to collapse
Does it charge when plugged in?
I think it may be the micro USB port on the device that is damaged.
GDReaper said:
Does it charge when plugged in?
I think it may be the micro USB port on the device that is damaged.
Click to expand...
Click to collapse
It is charging without problem.
Right now i opened the back plate of the device and booted that way. And it passed the samsung logo this time. It started loading the default programs since i have factory defaulted it.
But gone dark all of a sudden again
I places the phone on a AC device and its working. But the thing is it doesnt seem to get that much hot since it closes after you use it without the AC
Just saw a small yellow " seciruty bit kernel" on top left corner when it was booting. It was a first.
Can some one guide me where can i find stock so i can flash in and try it that way ?
thanks
agassparkle said:
Can some one guide me where can i find stock so i can flash in and try it that way ?
thanks
Click to expand...
Click to collapse
Hi. I have the same problem. Three weeks ago, after an app upgrade, the phone reboot itself many times. I took the battery off and inserted again and I lose my phone.
With patience, it turned on "normally" (blue led after Samsung letters, but very slowly) and I managed to recover contacts. Even a backup of the files. After wipping cache in recovery mode, I could check tha t some data was deleted...
Now I'm trying to reset to factory or use Odin to download a Samsung firmware.
Sorry
HI
So i was trying to restore my LG G2 D803 phone and I accidentally unplugged it when I was doing the LG Tools process, I turned off my phone so I can reset it but now it doesn't work anymore. So now my phone can't use Firmware Update, and every time I tried to escape it, by hold the power button or anything, it goes back to Firmware Update where its now at 0%. What do I do now?
EDIT: I think the problem i'm facing right now. Is that it keeps going into a glitch download mode when I turn my phone on, and I can't access download mode properly or factory reset, due to going back to the glitched download mode. I tried to flash it properly, letting it drain battery on itself, and turning it off FULLY & turning it back on, where all these methods would just lead back to the glitched download mode.
JustinY050 said:
HI
So i was trying to restore my LG G2 D803 phone and I accidentally unplugged it when I was doing the LG Tools process, I turned off my phone so I can reset it but now it doesn't work anymore. So now my phone can't use Firmware Update, and every time I tried to escape it, by hold the power button or anything, it goes back to Firmware Update where its now at 0%. What do I do now?
Click to expand...
Click to collapse
You can try flashing a kdz for your model in download mode with lg 2014 flash tool. See links below, there might be YouTube tutorials, not sure.
https://lg-firmwares.com/lg-d803-firmwares/
https://forum.xda-developers.com/showthread.php?t=2797190
crophs said:
You can try flashing a kdz for your model in download mode with lg 2014 flash tool. See links below, there might be YouTube tutorials, not sure.
https://lg-firmwares.com/lg-d803-firmwares/
https://forum.xda-developers.com/showthread.php?t=2797190
Click to expand...
Click to collapse
Yea I tried using the Flash tool Way but it doesn't work, I think the problem is that the LG is stuck in download mode so I can't do any Flash tool stuff or anything, and I can't restart my phone because it would just go back.
JustinY050 said:
Yea I tried using the Flash tool Way but it doesn't work, I think the problem is that the LG is stuck in download mode so I can't do any Flash tool stuff or anything, and I can't restart my phone because it would just go back.
Click to expand...
Click to collapse
Can you elaborate more when you say it doesn't work?
After you hit flash on the software, don't do anything for like 25mins. It may show you error messages on computer, that it failed or whatever, pop up windows, don't click on anything just let it stay like that. The progress bar can also be stuck on the phone, not a problem. Give it that 25 mins.
crophs said:
Can you elaborate more when you say it doesn't work?
After you hit flash on the software, don't do anything for like 25mins. It may show you error messages on computer, that it failed or whatever, pop up windows, don't click on anything just let it stay like that. The progress bar can also be stuck on the phone, not a problem. Give it that 25 mins.
Click to expand...
Click to collapse
It didn't show any progress on the phone, and also said an error on not working. And there would be no change in the download screen, like it would say that nothing is downloading from the USB port it is in and etc.
But I try to wait for 25 mins and see.
crophs said:
Can you elaborate more when you say it doesn't work?
After you hit flash on the software, don't do anything for like 25mins. It may show you error messages on computer, that it failed or whatever, pop up windows, don't click on anything just let it stay like that. The progress bar can also be stuck on the phone, not a problem. Give it that 25 mins.
Click to expand...
Click to collapse
Nope it didn't work. I did it for at least 30 mins and nothing happened, still the same screen on both on my phone and computer.
Can you post a video ?
crophs said:
Can you post a video ?
Click to expand...
Click to collapse
Of the 25 mins or my problem?
I cant do it for now, but I think the problem is that my phone is in a loop of download mode, i mean that everytime I turn off my phone and turn it back on, it goes back to download mode without me pressing the buttons.
JustinY050 said:
Of the 25 mins or my problem?
I cant do it for now, but I think the problem is that my phone is in a loop of download mode, i mean that everytime I turn off my phone and turn it back on, it goes back to download mode without me pressing the buttons.
Click to expand...
Click to collapse
You must turn it off completely before booting in download mode. Keep pressing and holding volume down+power for a minute, it should completely turn off after one or two LG logo. If it doesn't then you can unplug battery. After that you don't boot with power button, then you boot with download mode method.
Video from complete shutdown - putting USB in computer while pressing volume up button and starting download mode - software recognizing your device - checking all the correct options in software - hitting flash button - state of phone after flash started.
crophs said:
You must turn it off completely before booting in download mode. Keep pressing and holding volume down+power for a minute, it should completely turn off after one or two LG logo. If it doesn't then you can unplug battery. After that you don't boot with power button, then you boot with download mode method.
Video from complete shutdown - putting USB in computer while pressing volume up button and starting download mode - software recognizing your device - checking all the correct options in software - hitting flash button - state of phone after flash started.
Click to expand...
Click to collapse
No, like it automatically goes to download mode wihtout me pressing the buttons, and if i do it the normal button pressing way with the power and volume up, then idk if its the glitch version. But the problem im trying to solve is fixing it so it stops going automatically to the glitched download mode when i turn it on
JustinY050 said:
No, like it automatically goes to download mode wihtout me pressing the buttons, and if i do it the normal button pressing way with the power and volume up, then idk if its the glitch version. But the problem im trying to solve is fixing it so it stops going automatically to the glitched download mode when i turn it on
Click to expand...
Click to collapse
unlpug battery, see youtube how to put it in download properly and flash
crophs said:
unlpug battery, see youtube how to put it in download properly and flash
Click to expand...
Click to collapse
Like take the battery out?
JustinY050 said:
Like take the battery out?
Click to expand...
Click to collapse
Whatever that means to you. Not sure how old you're, but try not to be a thick skull with someone trying help you for free, bye
crophs said:
Whatever that means to you. Not sure how old you're, but try not to be a thick skull with someone trying help you for free, bye
Click to expand...
Click to collapse
K firstly, Im not trying to be rude or anything, I just need help fixing my phone. If I somehow offended you in any reason why, im sorry. And I literally don't know much about phones, but I was trying to make sense on your instructions and making sure Im not going to mess it up. If you dont want to help anymore, its fine, im grateful that you tried to help
Also I know how to flash it properly and put it in download mode properly, its just that its always going to a glitched download mode so I can't download anything, or put it in factory mode.
JustinY050 said:
K firstly, Im not trying to be rude or anything, I just need help fixing my phone. If I somehow offended you in any reason why, im sorry. And I literally don't know much about phones, but I was trying to make sense on your instructions and making sure Im not going to mess it up. If you dont want to help anymore, its fine, im grateful that you tried to help
Also I know how to flash it properly and put it in download mode properly, its just that its always going to a glitched download mode so I can't download anything, or put it in factory mode.
Click to expand...
Click to collapse
No you shouldn't, rather I am sorry, made a bad judgement call. I left room for confusion in my post. Should've said unplug and plug back the battery. Perhaps you thought if i meant to leave it unplugged.
As your main problem was to stop it from bootlooping into a glitched download, it can be done with holding power and volume down for a minute or two.
But since that didn't work for you i suspected button/hardware failure and so recommended to reconnect the battery.
Another way can be, to let it be as is, so that the battery drains itself and after that charging it with a wall adapter. And see if it stops booting into download itself, or displays a charging only screen.
Anyhow, I hope you find a way out. Feel free to ask anything again.
crophs said:
No you shouldn't, rather I am sorry, made a bad judgement call. I left room for confusion in my post. Should've said unplug and plug back the battery. Perhaps you thought if i meant to leave it unplugged.
As your main problem was to stop it from bootlooping into a glitched download, it can be done with holding power and volume down for a minute or two.
But since that didn't work for you i suspected button/hardware failure and so recommended to reconnect the battery.
Another way can be, to let it be as is, so that the battery drains itself and after that charging it with a wall adapter. And see if it stops booting into download itself, or displays a charging only screen.
Anyhow, I hope you find a way out. Feel free to ask anything again.
Click to expand...
Click to collapse
Nah its ok, that happens to me too sometimes.
So I was going to try to unplug my battery and reconnect it but then but before I was, i was testing some other stuff with the button commands stuff (I mean like the download mode with pressing power and volume up adn stuff) and I think i was able to get the actualy download mode, not the glitched one. I was able to download a bit for the flash tool so what i'm testing rn is to see if I can do the full factory reset and see if that fixes it.
PS: I was already doing the flashtool before so its fine if I erase my data
JustinY050 said:
Nah its ok, that happens to me too sometimes.
So I was going to try to unplug my battery and reconnect it but then but before I was, i was testing some other stuff with the button commands stuff (I mean like the download mode with pressing power and volume up adn stuff) and I think i was able to get the actualy download mode, not the glitched one. I was able to download a bit for the flash tool so what i'm testing rn is to see if I can do the full factory reset and see if that fixes it.
PS: I was already doing the flashtool before so its fine if I erase my data
Click to expand...
Click to collapse
K it looks like it worked but now it crashes when it loads the LG logo
JustinY050 said:
K it looks like it worked but now it crashes when it loads the LG logo
Click to expand...
Click to collapse
Sounds like a bootloop, i once fixed it by using another usb port and usb cable. Sometimes they get disconnected for bad connection and cause this kinda error. If MD5 is available, please match yours with original after downloading files. You can keep flashing, maybe try a different kdz later. There is also a TOT method which i never tried myself. This phone is almost impossible to brick permanently.
Some good threads -
https://forum.xda-developers.com/showthread.php?t=2475045
https://forum.xda-developers.com/showthread.php?t=2687768
This is the easiest
https://m.youtube.com/watch?v=cOxlaIPW2ew
https://www.google.com/amp/s/amp.re...he_lg_g2_is_unbrickable_a_story_of_death_and/
crophs said:
Sounds like a bootloop, i once fixed it by using another usb port and usb cable. Sometimes they get disconnected for bad connection and cause this kinda error. If MD5 is available, please match yours with original after downloading files. You can keep flashing, maybe try a different kdz later. There is also a TOT method which i never tried myself. This phone is almost impossible to brick permanently.
Some good threads -
https://forum.xda-developers.com/showthread.php?t=2475045
https://forum.xda-developers.com/showthread.php?t=2687768
This is the easiest
https://m.youtube.com/watch?v=cOxlaIPW2ew
https://www.google.com/amp/s/amp.re...he_lg_g2_is_unbrickable_a_story_of_death_and/
Click to expand...
Click to collapse
Sorry for the late reply, just been busy flashing my phone. So I been trying to re flashing my phone using the TOT method because the kda method isn't working, but either 1) it keeps crashing when its downloading 2) cannot recognize the phone to my computer when my phone is in download mode but says its not connected to my computer. Before, it did kinda work, it kept crashing but it lasted a bit longer sometimes, but I had to reflash it because the software update was glitched where it says its on the notification bar but wasnt there. So for rn, i'm still trying to reflash it.
I donno much about the TOT method, haven't tried myself. Getting a hunch that there might be hardware issues somewhere which is interrupting the process and not letting it finish, could be the cable, pc usb outlet, phone's micro usb port....perhaps a loose connection or something else.
If i were you i would stick to the kdz, as it's working somewhat better for you and they all serve same purpose in the end. That youtube video is actually a good step by step tutorial.