usb to a500 - Acer Iconia A500

How do you move files from USB to the tablet?

MrPunem,
You need to go to the Acer Support download site and download
the USB driver.
Once you have downloaded it, extract it and run the "Setup" program.
After the setup is completed, turn on your A500 and plug the factory
USB cable that came with it into the miniUSB and then into the PC.
You should get a message box on your PC screen with option and you
should open the Windows Explorer files item.
The column on the left will show you your Acer and the /sdcard directory
(not named that on the PC screen) folders.
I have found it to be pretty elemental as an interface. Can't do much
but copy back and forth. Can't rename folders on the Acer, etc.
Hope this helps.
Rev

Your question is a bit ambiguous. If you mean from you computer to the tablet via USB, use butchconner's instructions. If you mean from a storage device plugged into the USB connector on the tablet, you will need a file manager of some sort to help with that. I use Astro, but there are others. You will need to browse to the /mnt/usb_storage directory, select the files you want and copy them, then paste to mnt/sdcard/-whereeveryouwanttoputthem-/. There are other ways, I'm sure but this is simple and it works.

ku4tp said:
Your question is a bit ambiguous. If you mean from you computer to the tablet via USB, use butchconner's instructions. If you mean from a storage device plugged into the USB connector on the tablet, you will need a file manager of some sort to help with that. I use Astro, but there are others. You will need to browse to the /mnt/usb_storage directory, select the files you want and copy them, then paste to mnt/sdcard/-whereeveryouwanttoputthem-/. There are other ways, I'm sure but this is simple and it works.
Click to expand...
Click to collapse
Can you select more then 1file at a time to copy?

actually the driver doesnt work unless win media player 11 is on ur pc

Related

Installing separate files...

Hi there, I'm having trouble installing programs that seem to come in loads of separate files. One of them is an XML file and the rest seem to be unopenable/unrecognisable by windows.
Can anyone give me advice on how to install these onto my MPV3100. I've search for Install help but there doesn't seem to be anything specific on how to do it.
Thanks.
wingzero124 said:
Hi there, I'm having trouble installing programs that seem to come in loads of separate files. One of them is an XML file and the rest seem to be unopenable/unrecognisable by windows.
Can anyone give me advice on how to install these onto my MPV3100. I've search for Install help but there doesn't seem to be anything specific on how to do it.
Thanks.
Click to expand...
Click to collapse
I can't be sure but it sounds like you have decompressed a .cab file on your PC before trying to place it on your device. If so that's not the way to do it.
There are in general threetypes of programme/files you can download for WM5
1. ,cab files
2. .exe files
3. .zip files
.cab files you place directly on the device by connecting via active sync using the Explore button on the PC active sync screen. If you have a storage card inserted navigate to that and drop them in there. To run a Cab file just click on it on your device.
.exe files in the main you run on your PC whilst connected via active sync. The programme will automatically instal the programme on the device. Keep an eye on the device there maybe some taps you have to make.
.Zip files in general you extract these on the PC and then you'll see if they are .cabs or .exes and then treat them as above.
Most programmes will then show up under the Start>Programmes listing on the device and you run them from there. Some though may not especially if you chose to install them to storage card. In which case use file explorer programme to navigate to them.
Ultimately you'll want a programme that allows you to create short cuts to them probably on the desktop screen.
Hope this helps
Mike

can't transfer files from device to pc

Someone can help me? I have Tom_B_B_v4[2].0_TouchFlo_Professional installed on my Artemis, and activesync 4.5 on laptop.
Is impossible to transfer files from device to laptop. It is possible only from laptop to Artemis. What can i do?
Many thanks!
if the files are located in the my doc dir then they should be mirroed onto the
my pda documents inside the my documents on the pc
otherwise one can use explore device
in activesync on the pc and copy the cab file
and paste it where one would wish on the pc
does'nt works.
Does'n work. This is the problem: if I try to copy a file (for example a Mp3) located everywere (internal or sd memory) in the pda, and paste in the laptop (desktop or folder), it seems than start copying file, but really does'nt.
(Sorry for my english)
coccobabbo said:
Does'n work. This is the problem: if I try to copy a file (for example a Mp3) located everywere (internal or sd memory) in the pda, and paste in the laptop (desktop or folder), it seems than start copying file, but really does'nt.
(Sorry for my english)
Click to expand...
Click to collapse
sounds like a firewall (windows file sharing problem) try and run a network wizard on the pc and make sure you can share your C drive.
give it a go it should work.
neilhhardy said:
sounds like a firewall (windows file sharing problem) try and run a network wizard on the pc and make sure you can share your C drive.
give it a go it should work.
Click to expand...
Click to collapse
I think is a problem of activesync 4.5. I read the guide online and in "transfer files" is written "does'nt work with all devices" (is written in Italian, I think this is the traslation)
solved?
I solved temporarily in this way:
On Activesync activate tranfer files, automatically create on desktop folder "my documents" where is possible manage files.
Then I installed "cardexport-wm5" on device. With this program is possible to switch usb connection to Actyvesinc or Cardexport; in this case the memory card is recognized by PC like an external USB drive. Is'nt so easy, but I do'nt realize still better.
However, I'm looking for a solution for this problem, and I am available to share my experiences, in this moment I think that is a bug of activesync 4.5. So, ask for administrators if possible open a topic for this problem.

File Editing on Touch HD

Hi all,
Just wondering if anybody could shed light on the following scenario:
When I connect my HD to my PC using windows mobile device center and successfully sync, i then navigate to a windows explorer tab and open up my storage card. I can then browse files, copy and paste, rename etc, however, i can not edit word files. When i open up a word file on my device via my pc it is locked as read only. The only way to be able to edit such files is to disconnect, and then reconnect my device, but in disk drive mode.
Does anybody know if i can edit my files and use activesync at the same time?
Thank you very much for your time

How to extract the USB driver from the Acer executable package

There are times when a driver package simply will not install properly leaving Windows in a state where a a single component is missing or is linked to the incorrect driver or a dummy driver. In these cases Windows must be coaxed into finding the correct driver.
Go into control panel/system/device manager with the tablet hooked up. Look for devices with the yellow ! exclamation point.
Some drivers when you download them can be extracted directly from the package. Unfortunately the Acer USB executable keeps you from doing this directly. But, there is a way to get to the driver package and copy it.
Open an Explorer window. Navigate to C:\Users\<youruserprofile>\AppData\Local\Temp
That folder is technically hidden, if you can't see it, you'll have to go to the menu under tools/folder options and check 'Show hidden files and folders'. You may have turn on the menu bar by going to 'Layout' on the sidebar.
Note: Even if you can't see the AppData folder upon entering your profile directory, you can also navigate to it by appending \AppData to the path on the address bar.
Change your view to 'Details' and then sort by date. Leave that window as is.
Unzip the the Acer USB driver executable package. This will leave you with a file called "ICONIA TAB USB Driver Setup.exe"
Run the executable and select the language and then click 'next', and just leave it open and don't do anything. At this point the setup will extract the driver package from the executable.
Now go back to the Explorer window open to the temp folder. Scroll until you can see the newest folders (they should have the current date and time). The setup will have created 2 folders. One is the actual setup, the other is the drivers. On my machine, the driver folder name is "{2736D2C2-2104-4AA0-BEB9-091B78D38D7D}" but this may differ on yours.
Of the two created folders, the folder that has about 20 .ini files in it is the one you want. Go back up and make a copy of this folder to a different location where you can find it easily (right click and copy/paste or drag and drop).
Once you've copied this folder, rename it to something useful like "Acer A500 USB driver".
You can now close the setup. When you do, the setup will delete the folders in Temp.
You now have a folder with the full driver package.
Fixing missing or B0rken drivers:
Go to back to control panel/system/device mangler. With the tablet hooked up, look for any exclamation points related to USB or tablet. Right click on the non-working item and select "Update Driver Software". Then select "Browse my computer for driver software". Browse to the folder you copied and select it and click OK.
Windows should acquire and install the driver properly.
I have used this in ICS, where the tablet connects as a media drive but will not establish an ADB connection (Acer Composite ADB Interface).
Hi guys
I think i tried every tips i could find. My problem, it's impossible to install the usb driver from Acer. Everytime i tried i got this second windows popping.
Any ideas?
Thanks
Spidernico said:
Hi guys
I think i tried every tips i could find. My problem, it's impossible to install the usb driver from Acer. Everytime i tried i got this second windows popping.
Any ideas?
Thanks
Click to expand...
Click to collapse
This is from memory, and a few weeks old.
But from what I recall there is an additional step for the 1.06.1500 download, it does not extract the drivers directly but a msi package that contains the drivers.
So the steps would be something like:
Download the driver package
Unzip the driver package
Run the setup.exe
Just leave it running untill you have completed the next steps.
When started setup.exe file will extract a msi package into a subdirectory of %tempdir% (should be C:\Users\<youruserprofile>\AppData\Local\Temp as mentioned earlier)
Look in %tempdir% for the extracted .msi file
Extract the .msi file (using winrar of whatever you prefer that can read .msi)
It contains among other things the driver dll and inf files
Copy the files you want somewhere else
Well, that work, for the first step. Now i have to install the APX driver... And this is not working with these instructions... Any new Ideas? Thanks anyway
Spidernico said:
Hi guys
I think i tried every tips i could find. My problem, it's impossible to install the usb driver from Acer. Everytime i tried i got this second windows popping.
Any ideas?
Thanks
Click to expand...
Click to collapse
When I got stuck there, I fixed it by unplugging the Acer A500 from the PC's USB port.

[Q] Files not synchronizing when opening on PC

I use Es File Explorer, and have used other apps to delete files off the nexus 7 storage. However when I plug it to the PC and open the internal storage, I see the files are still there. The files HAVE BEEN deleted though, as when I click on the file, it says file corrupt, and doesn't take up space anymore.
For example I put a movie file into my tablet. I watched it, and deleted it after I'm done. I plug it on my pc and I see the folder and file still there.
how can I fix this?
It can be a pain because I use my nexus 7 to read my school documents.. sometimes I rename the file, and the whole thing is corrupt, as in I can't open it when I plug it in my PC anymore, because the names doesn't match. Or If I don't remember correctly which files I've deleted, and re-delete it when I use my PC, soon it will be fill with a lot of useless files when I open the internal storage on my PC.
Any help? I don't remember this being a problem before, I was able to edit/delete files, and it would show up as is on my pc.
Also, when I open a folder with pictures on my PC, some files do show the thumbnail, while other files just show the default pic file.
Basically my nexus 7 feels very 'corrupt' and slow when I browse the files on my PC. Anyone else have the same problems?
You could use ADB instead

Categories

Resources