Hi,
First of all, I'm running Cotulla's Stock Desire NAND Rom on my HTC Leo.
Lately I've been having the problem, a week at this point, where I have full bars and am unable to place/receive phone calls or send/receive text messages. This problem goes on for about 5 minutes everytime I unlock my phone. It's at a point where I don't even get incoming calls/texts.
I've done some searches, but all threads I've read say that it's most likely my area's tower's fault. But I'm just making sure because it seems highly unlikely that it only happens when my phone is locked...
Anyways, I'm also wondering if it has anything to do with my APN settings, since sometimes when I switch from one of them to another it seems to fix the problem for an hour or two.
I am unable to post my APN's because of the restriction that new users can't post outside links (which I guess includes the links in MMSC and server of the APN) My first APN uses epc*tmobile*com and my second one uses wap*voicestream*com
I will try and post my full APN info as soon as I can.
Edit: Here are my two APN's with * instead of . (sorry if I'm breaking a rule)
(and *** = http)
Name T-mobile US
APN epc*tmobile*com
Proxy (Not Set)
Port (Not Set)
Username (Not Set)
Password (Not Set)
Server (Not Set)
MMSC ***www*mms*msg*eng*t-mobile*com/mms/wapenc
MMS proxy (Not Set)
MMS port (Not Set)
MMS protocol WAP 2.0
MCC 310
MNC 260
Authentication type None
APN type (Not Set)
#2
Name T-mobile US
APN wap*voicestream*com
Proxy 216*155*165*050
Port 8080
Username (Not Set)
Password (Not Set)
Server ***216*155*147*54/servlets/mms
MMSC ***www*mms*msg*eng*t-mobile*com/mms/wapenc
MMS proxy 216*155*165*050
MMS port 8080
MMS protocol WAP 2.0
MCC 310
MNC 260
Authentication type None
APN type (Not Set)
For a while I was using #2 because #1 was refusing to give me any data connection, but now I am using #1 after learning #2 was the old non-smartphone APN.
Is there anything wrong with my first APN setting? And could my inability to place calls be due to anything other than my local towers?
Thank You
Try these settings for APN. These are for data plan tmobile, it's hard to say which settings is best until we try it.
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: <not set>
<>MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
<PPP**>MMSC: not set
MMS Proxy: <not set>
MMS Port: <not set>
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
Auth Type: <not set>
APN type: default,supl,mms
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.165.155.050
Port: 8080
Username: None
Password: **** (These are just stars, you can put it in there manually)
Server: * (Same)
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.165.155.050
MMS Port: 8080
MCC: 310
MNC: 260
So I tried both out for about half of the day, and I'm having better data speeds with the 2nd APN setting (consistently around 2.75-3.5Mbps) however I'm still having the issue of sometimes not receiving/being able to send texts and calls even though I have full bars and am able to open my browser and load webpages. Is it likely that this is just T-mobile's fault or could there my an issue with my phone?
_iKiller_ said:
So I tried both out for about half of the day, and I'm having better data speeds with the 2nd APN setting (consistently around 2.75-3.5Mbps) however I'm still having the issue of sometimes not receiving/being able to send texts and calls even though I have full bars and am able to open my browser and load webpages. Is it likely that this is just T-mobile's fault or could there my an issue with my phone?
Click to expand...
Click to collapse
Not being able to send out text could be a problem with your current ROM. Try tytung's ROM, follow my sig. It's really sweet with tmobile.
Have u tried changing you're radio...
Sent from my Nexus One
bigfdaddy said:
Have u tried changing you're radio...
Sent from my Nexus One
Click to expand...
Click to collapse
I've changed the radio twice now, from my original 2.08.50.08 to 2.15.50.14(latest htc version) to 2.09.50.29_2(latest tmous release) and I'm still having the same issues of having full bars and not receiving texts/calls.
I really would hate to switch from this ROM, is there any other possible solutions to this issue?
If not, I guess it's time to try a new ROM... to flash a new Android ROM onto my HD2, do I boot into the Magldr USB Flasher or HSPL Flasher?
Related
I have a G1 with no data plan and the MMS does not work?
Name: T-Mobile US
APN: wap.voicestream.com
proxy: 216.155.165.050
port: 8080
Username: not set (delete everything in this field)
Password: not set (delete all here too)
Server: not set (delete the *)
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.155.165.050
MMS Port: 8080
MMC: 310
MNC: 260
APN type: not set
These are my settings. I just want someone to confirm that T-Mobile won't let you use these settings anymore. Does it still work?
I am fairly sure mms uses data so you answered your own question..
bastage said:
I am fairly sure mms uses data so you answered your own question..
Click to expand...
Click to collapse
you don't have to have a data plan to be able to send MMS messages>
Nayyak said:
you don't have to have a data plan to be able to send MMS messages>
Click to expand...
Click to collapse
hmm.. I know you do on CDMA so it could be different on GSM then.. But then why isn't his MMS going through?
I do not know. All of other phones worked with MMS without a data plan like my iPhone 3G. I know a lot of people are having trouble with this like me from other websites.
remove the MMS Proxy and port.
It didn't seem to work. Are those your settings?
No, those MMS Settings were from my Nokia 6680 that didn't have a data plan.
but my G1 has a data plan and those are my settings:
Name: T-Mobile US
APN: epc.tmobile.com
proxy: <Not set>
port: <Not set>
Username: none It isn't blank
Password: none same here. the password is "none"
Server: * asterisk
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: <Not set>
MMS Port: <Not set>
MMC: 310
MNC: 260
APN type: not set
Sadly, it didn't work . Can anyone else share their settings?
this worked for me until i switched to cupcake, if that helps.
im lookin for a way to get mms's aswell!
Yes a lot of people are wanting mms for their G1. No one knows the settings though.
https://support.t-mobile.com/doc/tm...ex=y&navtypeid=2&pagetypeid=2&prevPageIndex=6
I hope this works
yea i also wanna know how to get it to work without the data plan
Thanks for the link but it didn't do anything. We just have to wait until someone shares their working settings.
Bump bump bump
I can't seem to get it to work anymore either..
Has anyone come across settings that avtually work yet?
Are any developers working on mms?
No. Everyone wants a phone without certain features working.
Cmon. Patience. These devs are working their butts off on numerous things... ESPECIALLY those that are common problems!
MMS is working on my cm6 rc1 build by zego.. i'm with tmo and the settings was the default settings from when i first loaded this android build. I've seen ppl complain about it not working and some does like mine for instance. So i'm guessing it depends on the settings of your one's network provider..
Sent from my HTC HD2 CyanogenMod using XDA App
Ooppss.. can't edit with android xda app.. anyway, i meant "your network provider"
Sent from my HTC HD2 CyanogenMod using XDA App
I'm also on T-mobile US I couldn't send mms with any version of Android. I kept searching on here... no luck so then i seen someone post that it was working for them they were using the Miri 23569 v17.6 rom so i changed roms and it started working i have not really tested it with any other version of Android but the Cyn6 but it is working for me there with 2.10 radio.
krat0s123 said:
Ooppss.. can't edit with android xda app.. anyway, i meant "your network provider"
Sent from my HTC HD2 CyanogenMod using XDA App
Click to expand...
Click to collapse
Jus to let u know u can edit posts while using the XDA app, jus long press your post and select Edit.
And to OP, the devs don't like when people bug about features that they know don't work or have bugs, they'll get to them as time comes, jus wait like everyone else.
Sent from my HTC HD2 running DarkStone HD2Froyo v1
ern112 said:
I'm also on T-mobile US I couldn't send mms with any version of Android. I kept searching on here... no luck so then i seen someone post that it was working for them they were using the Miri 23569 v17.6 rom so i changed roms and it started working i have not really tested it with any other version of Android but the Cyn6 but it is working for me there with 2.10 radio.
Click to expand...
Click to collapse
interesting, i have the same problem just can't send mms. im using miri v17 right now. maybe i will try v17.6
just swapped over to miri 17.6 and the 2.10 radio. MMS receiving still works. however sending does not. also tried settings listed here http://forum.xda-developers.com/showthread.php?t=735532&highlight=MMS+settings&page=104
no dice.
A few strange things i do notice though. when you first start trying to send, the data icon on the top bar acts like its interacting with servers. i killed all processes to try and ensure there was no background data going on, still acted the same.
I then long pressed on the MMS i was trying to send and viewed the message details. Interesting find... The message details claims the entire message is only 1kb.
im going to continue to play with settings and see whats up.
disregard the possible background data. that data was being used restoring apps from the last android version i had installed.
I cant believe that I have my CCNA (Cisco Certified Network Associate) i did not notice this.
IP address octets cannot have a octet begin with a 0
So. having said that. use these settings and have a great time sending messages.
NAME: T-Mobile US
APN: epc.tmobile.com
PROXY: Blank
PORT: Blank
USERNAME: Blank
PASSWORD: Blank
SERVER: wap.voicestream.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS PROXY: 216.155.165.50 <--------- THE .50 is the major change i found.
MMS PORT: Blank
MCC: 310
MNC: 260
AUTH TYPE: NONE <--this is another changed setting. do not leave blank.
APN TYPE: default,supl,mms <-- This also seems to be important.
Make sure after editing that you press the windows key and click save.
enjoy.
nogo for me. energy barebones rom, darkstone froyo.
Ill test that rom setup next.
however, Make sure after editing that you press the windows key and click save.
ahijada said:
No. Everyone wants a phone without certain features working.
Cmon. Patience. These devs are working their butts off on numerous things... ESPECIALLY those that are common problems!
Click to expand...
Click to collapse
I asked the developers not you! actually u replying to my thread is meaningless since u dont have any info on mms. I know wat the developers has done thus and we all are thankful. But this thread was made to either get some working mms, the status, some different settings i havent tried or for a dev to post the current progress on mms. now go sit in the corner and take a time out.
krat0s123 said:
MMS is working on my cm6 rc1 build by zego.. i'm with tmo and the settings was the default settings from when i first loaded this android build. I've seen ppl complain about it not working and some does like mine for instance. So i'm guessing it depends on the settings of your one's network provider..
Sent from my HTC HD2 CyanogenMod using XDA App
Click to expand...
Click to collapse
what are the settings?
ROM's with no SenseUI and stock Messaging App should work without error as long as APN is correctly Set. Stock/Non-Sense UI Rom's APN:
Code:
NAME: T-Mobile US
APN: epc.tmobile.com
PROXY: <Not Set>
PORT: <Not Set>
USERNAME: <Not Set>
PASSWORD: <Not Set>
SERVER: <Not Set>
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS PROXY: <Not Set>
MMS PORT: <Not Set>
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
AUTH TYPE: None
APN TYPE: default,supl,mms
ROM's WITH SenseUI all have the same issue/bugs if you are on T-Mobile in the US (even with the correct APN's set).
MMS pictures are shrunk to tiny tiny 2kb images when receiving with that HTC Messaging App, this is because Sense sends in the user-agent string for MMS found in: /system/customize/MNS/default.xml
T-Mobile's MMS server's doesn't recognize the "HTC Desire" user-agent string therefore when receiving MMS, you get a tiny tiny thumbnail pic. I think you can set it to "NexusOne" Or was it "Nexus One/Build FRFxx". Forgot if it was one or the latter. (OH.. this is only for TMOUS People, I don't think this affects european peeps, since the Desire Rom was made for that region.) Problem with this is, I think those settings are loaded with the initial setup (first boot, and I'm not sure where it's stored afterwards. If you modify now and save it, it seems to have no effect. Also, customized SenseUI seems to ignore the file altogether?)
Those with incorrect, or missing APN's using any ROM with SenseUI. If you are on T-Mobile, your settings should be as follows (This will allow you to send and receive, but theres the file size restriction):
Code:
NAME: T-Mobile Data
APN: epc.tmobile.com
PROXY: <Not Set>
PORT: <Not Set>
USERNAME: <Not Set>
PASSWORD: <Not Set>
SERVER: <Not Set>
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS PROXY: <Not Set>
MMS PORT: <Not Set>
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
AUTH TYPE: None
APN TYPE: default,supl,mms
Actually, ignore this one, its apparently used for Firmware Over-The-Air updates.
Code:
NAME: T-Mobile FOTA
APN: epc.tmobile.com
PROXY: <Not Set>
PORT: <Not Set>
USERNAME: <Not Set>
PASSWORD: <Not Set>
SERVER: <Not Set>
MMSC: <Not Set>
MMS PROXY: <Not Set>
MMS PORT: <Not Set>
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
AUTH TYPE: None
APN TYPE: hipri
Mods - I know this is a question asked in most android builds "how do i get mms to send?" so i took some time and tried to work out a bug.
Devs - Ill be testing on all available builds tonight and post the results here.
Mods, Devs, and [Ref] Thread holders - want to use it ? go ahead.
Everyone else -
I cant believe that I have my CCNA (Cisco Certified Network Associate) i did not notice this.
IP address octets cannot have a octet begin with a 0
So. having said that. use these settings and have a great time sending messages.
NAME: T-Mobile US
APN: epc.tmobile.com
PROXY: Blank
PORT: Blank
USERNAME: Blank
PASSWORD: Blank
SERVER: wap.voicestream.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS PROXY: 216.155.165.50 <--------- THE .50 is the major change i found.
MMS PORT: Blank
MCC: 310
MNC: 260
AUTH TYPE: NONE <--this is another changed setting. do not leave blank.
APN TYPE: default,supl,mms <-- This also seems to be important.
Make sure after editing that you press the windows key and click save.
Initial test Winmo - Android setup: Miri 17.6, Radio 2.10.50.28_2 / Android; ShubCraft
_______________________________________________________________________________
Another test. This time with Miri 17.6 Radio 2.10.50.28_2 / Android MATTC
Settings from first boot allow me to send MMS. However, Serious degradation not seen in first test.
Settings are:
APN; epc.tmobile.com
prox blank
port none
user none
password none
server none
mmsc mms.msg.eng.t-mobile.com/mms/wapenc
MMS protocol wap 2.0
mcc 310
mnc 260
auth none
type not set
eosrider said:
Mods - I know this is a question asked in most android builds "how do i get mms to send?" so i took some time and tried to work out a bug.
Devs - Ill be testing on all available builds tonight and post the results here.
Mods, Devs, and [Ref] Thread holders - want to use it ? go ahead.
Everyone else -
I cant believe that I have my CCNA (Cisco Certified Network Associate) i did not notice this.
IP address octets cannot have a octet begin with a 0
So. having said that. use these settings and have a great time sending messages.
NAME: T-Mobile US
APN: epc.tmobile.com
PROXY: Blank
PORT: Blank
USERNAME: Blank
PASSWORD: Blank
SERVER: wap.voicestream.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS PROXY: 216.155.165.50 <--------- THE .50 is the major change i found.
MMS PORT: Blank
MCC: 310
MNC: 260
AUTH TYPE: NONE <--this is another changed setting. do not leave blank.
APN TYPE: default,supl,mms <-- This also seems to be important.
Make sure after editing that you press the windows key and click save.
Initial test Winmo - Android setup: Miri 17.6, Radio 2.10.50.28_2 / Android; ShubCraft
Click to expand...
Click to collapse
just tried with same set up.... minus the miri rom... running the chucky droid rom... these settings do not work for me....
NONE OF THE POSTED SETTINGS WORK FOR ME... CRAZY thing is i was able to send one last night. ONE! thats it????????????????
tesing multiple message sending now. with initial settings.
Multiple mms on initial settings works. have sent 4 different pictures to multiple numbers. all confirmed working.
just tried it to no avail, running nrg's glass wm, 2.12 radio and dan's froyo v1 with the latest zimage.
how long are you guys letting it run for before deleting the message?
I can confirm these settings work for US T-Mobile just sent one to myself
Using mattc froyo 1.4
Latest zImage
Miri 17.6
Radio 2.12.50
Tmous 1024
Sent from my HTC Desire using XDA App
hmm... benicia... im in Santa rosa. i wonder if these settings might be regional.
eosrider said:
how long are you guys letting it run for before deleting the message?
Click to expand...
Click to collapse
15 min... also if you long press one the sending picture and go to details the size is only 1KB
Now we need to fix the sending size, the pic I sent got so degraded an only 14k from a 250k pic
Sent from my HTC Desire using XDA App
Got it to send one MMS to myself. It took about 15 minutes. Had to disable WiFi. Can't get any more to send.
Using DarkStone froyo
Latest zImage (8/3)
Miri 17.6
Radio 2.12.50
Tmous 1024
Honolulu, HI
i can receive them now, which i couldn't consistently before. still no luck getting them out however.
i should add that it shows the correct file size when i send it as far as i know, none of them have popped up as being 1kb.
If the message details show 1kb you have not sent a message out
working diligently right now.
I beginning to think Miri's ROM is the factor that is allow those to be able to send. Cause i sent 3, and not a single one worked for over 15 min had the logo, wifi, no wifi, and different radios.
Tried 2 other roms and 2 other android builds per winmo rom. nothing worked.
Did not try experimenting with radio tonight but after all was said and done. went back to the first setup ( Android; Shub / Miri 17.6
ok... something really weird is going on. With different builds i sent all different pictures of random items ( lighters, coins, water bottles ). now those builds that failed my testing were all taken off. SD card was formated between builds. I ended up going back to the setup I had when i started this thread, because it works.
Now i have the people who's picture i sent randomly saying that they are getting their pictures. 3 different pictures and people. Keep in mind that this is AFTER I formatted and went back to the working setup. so i didnt have the same pictures on the sd card.
Thoughts?
I think the problem is the windows rom. I tried many different android builds none of them allowed me to send mms. I was only able to receive them.
the serve is not epc.tmobile.com!
Its wap.voicestream.com
stop thinking its epc. Its not. Thats bs it doesnt work very well!
S3BAZ10 said:
the serve is not epc.tmobile.com!
Its wap.voicestream.com
stop thinking its epc. Its not. Thats bs it doesnt work very well!
Click to expand...
Click to collapse
i use epc.tmobile.com on my 2g iphone to send/recieve mms...
so why are you saying it doesn't work?
eosrider said:
Mods - I know this is a question asked in most android builds "how do i get mms to send?" so i took some time and tried to work out a bug.
Devs - Ill be testing on all available builds tonight and post the results here.
Mods, Devs, and [Ref] Thread holders - want to use it ? go ahead.
Everyone else -
I cant believe that I have my CCNA (Cisco Certified Network Associate) i did not notice this.
IP address octets cannot have a octet begin with a 0
So. having said that. use these settings and have a great time sending messages.
NAME: T-Mobile US
APN: epc.tmobile.com
PROXY: Blank
PORT: Blank
USERNAME: Blank
PASSWORD: Blank
SERVER: wap.voicestream.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS PROXY: 216.155.165.50 <--------- THE .50 is the major change i found.
MMS PORT: Blank
MCC: 310
MNC: 260
AUTH TYPE: NONE <--this is another changed setting. do not leave blank.
APN TYPE: default,supl,mms <-- This also seems to be important.
Make sure after editing that you press the windows key and click save.
Initial test Winmo - Android setup: Miri 17.6, Radio 2.10.50.28_2 / Android; ShubCraft
_______________________________________________________________________________
Another test. This time with Miri 17.6 Radio 2.10.50.28_2 / Android MATTC
Settings from first boot allow me to send MMS. However, Serious degradation not seen in first test.
Settings are:
APN; epc.tmobile.com
prox blank
port none
user none
password none
server none
mmsc mms.msg.eng.t-mobile.com/mms/wapenc
MMS protocol wap 2.0
mcc 310
mnc 260
auth none
type not set
Click to expand...
Click to collapse
This setting work for me send and recive! Thank in a million!
..... I said this once already.
ROM's with no SenseUI and stock Messaging App should work without error as long as APN is correctly Set. Stock/Non-Sense UI Rom's APN:
Code:
NAME: T-Mobile US
APN: epc.tmobile.com
PROXY: <Not Set>
PORT: <Not Set>
USERNAME: <Not Set>
PASSWORD: <Not Set>
SERVER: <Not Set>
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS PROXY: <Not Set>
MMS PORT: <Not Set>
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
AUTH TYPE: None
APN TYPE: default,supl,mms
ROM's WITH SenseUI all have the same issue/bugs if you are on T-Mobile in the US (even with the correct APN's set).
MMS pictures are shrunk to tiny tiny 2kb images when receiving with that HTC Messaging App, this is because Sense sends in the user-agent string for MMS found in: /system/customize/MNS/default.xml
T-Mobile's MMS server's doesn't recognize the "HTC Desire" user-agent string therefore when receiving MMS, you get a tiny tiny thumbnail pic. I think you can set it to "NexusOne" Or was it "Nexus One/Build FRFxx". Forgot if it was one or the latter. (OH.. this is only for TMOUS People, I don't think this affects european peeps, since the Desire Rom was made for that region.) Problem with this is, I think those settings are loaded with the initial setup (first boot, and I'm not sure where it's stored afterwards. If you modify now and save it, it seems to have no effect. Also, customized SenseUI seems to ignore the file altogether?)
Those with incorrect, or missing APN's using any ROM with SenseUI. If you are on T-Mobile, your settings should be as follows (This will allow you to send and receive, but theres the file size restriction):
Code:
NAME: T-Mobile Data
APN: epc.tmobile.com
PROXY: <Not Set>
PORT: <Not Set>
USERNAME: <Not Set>
PASSWORD: <Not Set>
SERVER: <Not Set>
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS PROXY: <Not Set>
MMS PORT: <Not Set>
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
AUTH TYPE: None
APN TYPE: default,supl,mms
Actually, ignore this one, its apparently used for Firmware Over-The-Air updates.
Code:
NAME: T-Mobile FOTA
APN: epc.tmobile.com
PROXY: <Not Set>
PORT: <Not Set>
USERNAME: <Not Set>
PASSWORD: <Not Set>
SERVER: <Not Set>
MMSC: <Not Set>
MMS PROXY: <Not Set>
MMS PORT: <Not Set>
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
AUTH TYPE: None
APN TYPE: hipri
I've been trying for days to get this to work, I would get MMS to send but no internet and wont be able to download an MMS. I would be able to send an MMS but my number would come up as someone different. I haven't found a working config online for the Android Builds on MMS so I hope this helps everyone. it doesnt lift the 300kb limit, but I'm just freaking excited it works.
Go to Settings >> Wireless & Networks >> Mobile Networks >> Access Point Names >> then create a new APN with these settings
Name: T-Mobile
APN: internet2.voicestream.com
Proxy: 216.165.155.050
Port: 8080
Username: not set
Password: not set
Server: internet2.voicestream.com
MMSC: http://216.155.174.84/servlets/mms
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS Protocol: Wap 2.0
MCC: 310
MNC: 260
Authentication Type: None
APN type: not set
I hope this helps anyone that has been trying to use web2go on there HD2 Android builds!!! And I also hope this isn't a repost because I'd be highly upset because I couldnt find the configuration anywhere! Enjoy and please let me know if it works for you guys!
Using a proxy(not the mms proxy the other one), I was unable to access secure sites in the browser.
Here are my settings on web to Go plan on T-Mobile
Name: T-Mobile
APN:internet2.voicestream.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server:epc.tmobile.com
MMSC: http removed so i can post://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy:216.155.165.50
MMS Port: 8080
MMS Protocol: Wap 2.0
MCC: 310
MNC: 260
Authentication Type: None
APN type: default,supl,mms,hipri
Under setting Network Mode GSM/WCDMA Auto
I am able to receive mms clear pic's and large. I was using the setting that you had a few weeks back and it was not working out. I am now running this one and can send and receive.
I am radio baseband 2.15.50.14
MDJ FroYo Sense Clean v. 2.4 kernel MDJ S6.1
I hope this helps
firenrescue said:
Here are my settings on web to Go plan on T-Mobile
Name: T-Mobile
APN:internet2.voicestream.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server:epc.tmobile.com
MMSC: http removed so i can post://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy:216.155.165.50
MMS Port: 8080
MMS Protocol: Wap 2.0
MCC: 310
MNC: 260
Authentication Type: None
APN type: default,supl,mms,hipri
Under setting Network Mode GSM/WCDMA Auto
I am able to receive mms clear pic's and large. I was using the setting that you had a few weeks back and it was not working out. I am now running this one and can send and receive.
I am radio baseband 2.15.50.14
MDJ FroYo Sense Clean v. 2.4 kernel MDJ S6.1
I hope this helps
Click to expand...
Click to collapse
These settings right here are excellent!!!! after searching around for a hour. Things finally work!
Excellent !!! my internet is working now, thanks
Hi I'm new to the forum, I have a question how come I dont have the mms protocol as an option on the apn settings?
I'm on hd2 android with web2go, running same radio and androidversion, tried both sets of settings, and neither work..keep getting transient error message. anyone else?
firenrescue said:
Here are my settings on web to Go plan on T-Mobile
Name: T-Mobile
APN:internet2.voicestream.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server:epc.tmobile.com
MMSC: http removed so i can post://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy:216.155.165.50
MMS Port: 8080
MMS Protocol: Wap 2.0
MCC: 310
MNC: 260
Authentication Type: None
APN type: default,supl,mms,hipri
Under setting Network Mode GSM/WCDMA Auto
I am able to receive mms clear pic's and large. I was using the setting that you had a few weeks back and it was not working out. I am now running this one and can send and receive.
I am radio baseband 2.15.50.14
MDJ FroYo Sense Clean v. 2.4 kernel MDJ S6.1
I hope this helps
Click to expand...
Click to collapse
Well sending and receiving work for me, but pics are small filesize and blurry. Oh well.
bobblesss said:
These settings right here are excellent!!!! after searching around for a hour. Things finally work!
Click to expand...
Click to collapse
On my pictures, it always says "Generic Network Failure"
I am using the settings quoted. and i have their unlimited Data Plan. I have full Internet, Texting, and calling. But no PICTURE messaging. Thanks!
wow, I owe you a lunch for these. I can't believe I didn't try using the internet2 server for the mms server before. Thanks so much!!! I removed the proxy and it still works! I received the mms in about 4 seconds. Nothing else has worked and I've tried for hours and hours and almost gave up.
okay, only half working. I can send fast now, but can't receive anymore. It worked once then dead. I'll keep trying, but at least I'm closer.
Here's a more complicated, but maybe more effective method. I figured it out after trying several other methods to lesser and greater extents. This works for me but it may not work for you.
APN 1
Name: T-Mobile
APN: internet2.voicestream.com
Proxy: <Not set>
Port: <Not set>
Username: <Not set>
Password: <Not set>
Server: internet2.voicestream.com
MMSC: http://216.155.174.84/servlets/mms
MMS proxy: <Not set>
MMS port: <Not set>
MCC: 310
MNC: 260
Authentication Type: <Not set>
APN type: default
Menu-->SAVE
Menu->New APN
APN 2
Name: T-Mobile US-MMS
APN: epc.tmobile.com
Proxy: <Not set>
Port: <Not set>
Username: <Not set>
Password: <Not set>
Server:
MMSC: http://216.155.174.84/servlets/mms
MMS proxy:216.155.165.50
MMS port: 8080
MCC: 310
MNC: 260
Authentication Type: <Not set>
APN type: mms
Menu-->SAVE
Wait at least a minute. I'm using Handcent. You should see your connection disappear when you try to send as it switches over to epc.tmobile.com from internet2. I am getting 3-8 second sends at 100kb with similar receive times.
I think the trick is to do this and wait about 2-3 minutes. At first I had problems with the browser. It told me that I needed to upgrade to get internet access. But after about 3 minutes it started working.
let's see. trying again...
picture sent in 8 seconds
received in 5 seconds. 83kb
world of frustration is over for now
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
_____________
MDJ Gingerbread 1.6 NAND
2.15.50
There is an Energy Ti ROM under there somewhere too.
I also used *#*#4636#*#* (call this number) to set my Network settings to WCDMA preferred. I don't think that's what did it though.
thank you thehumble1 you settings helped me find another which works after my mms stopped working on AmeriCanAndroid gingerbread builds. if anyone is having issues I am using this apn
Name: T-Mobile
APN: internet2.voicestream.com
Proxy: Not Set
Port: Not Set
Username: Not Set
Password: Not Set
Server: internet2.voicestream.com
MMSC: http://216.155.174.84/servlets/mss
MMS Proxy: Not Set
MMS Port: Not Set
MCC: 310
MNC: 260
Authentication Type: None
APN type: default,mms
glad it worked for you. I'm still only getting success about 60% of the time, but it's the best I've had.
btw, if you said thanks, hit the thanks button too. It's a great way to help us know who is here to help each other and who's just looking for handouts.
I have found about 20 different posts that all list different APN settings for T-Mobile US. Does anyone know what they should be for sure? Please only post if you are able to SEND MMS. I seem to be able to receive MMS, but can never send MMS. I have gotten it to work a couple times on some builds but the same settings don't seem to work on other builds.
Posting the settings is great but if you have a backup file from "APN Backup and Restore" that would be even more convenient.
Thanks
I fought with this same problem for a while, trying every setting i found in all the threads. One way i finally found that allowed me to send and recieve was to make 2 APN's, one with the standard epc.tmobile.com and nothing else, and another named t-mobile mms with the following settings:
APN: T-Mobile MMS
Proxy: None
Port: None
Username :none
Password: none
Server: none
MMSC: http://mms.msg.eng.t-mobile.com/mms.wapenc
MMS Proxy: 216.155.165.050
MMS port: 8080
MCC: 310
MNC: 260
I got the idea for using multiple APN's when i looked at my girlfriend's my touch slide's settings. Hope that helps!
Thanks. I'll give that a try and let you know how it goes. I read once that there are different settings for PPP and RMNET. I wonder if that's why I was able to get it to work on some builds and not others.
Name: T-mobile US
APN: epc.tmobile.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: h ttp://216.155.174.84/servlets/mms
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: not set
APN type: default,supl,mms
THANKS pretzdothack AND deadmansink !!!!!!!!!!!!
as per another thread!
i use this and it works but the pictures are still fuzzy
WaveyKat said:
Name: T-mobile US
APN: epc.tmobile.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: h ttp://216.155.174.84/servlets/mms
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: not set
APN type: default,supl,mms
THANKS pretzdothack AND deadmansink !!!!!!!!!!!!
as per another thread!
i use this and it works but the pictures are still fuzzy
Click to expand...
Click to collapse
this particular mmsc worked for me!
ok
Thanks!!!!!!!
jay-red said:
I fought with this same problem for a while, trying every setting i found in all the threads. One way i finally found that allowed me to send and recieve was to make 2 APN's, one with the standard epc.tmobile.com and nothing else, and another named t-mobile mms with the following settings:
APN: T-Mobile MMS
Proxy: None
Port: None
Username :none
Password: none
Server: none
MMSC: http://mms.msg.eng.t-mobile.com/mms.wapenc
MMS Proxy: 216.155.165.050
MMS port: 8080
MCC: 310
MNC: 260
I got the idea for using multiple APN's when i looked at my girlfriend's my touch slide's settings. Hope that helps!
Click to expand...
Click to collapse
Thanks for these settings that u shared. This was the only APN that worked for my friend to get mms on tmobile prepaid with an AT&T Xperia Play 4g. They only get 2g/Edge, but I feel they even got an increase in speed from the "telekila"APN that was on the phone even if its small increase within 2g. Thanks everyone.
What are the correct apn settings for T-Mobile prepaid? Speedtest.net is reporting my location WAY off and pings are through the roof even though data speeds are just fine.