i own a Samsung galaxy Spica i5700..the problem is that it is not able to boot... its not switching on ..when i connect to the charger it starts charging and when i press the end button ( power on/power off) the charging symbol disappears .... and i m not able to go into recovery nor in download mode ..i just want to go into the download mode so that i can flash it again ...please let me know if i bricked my samsung galaxy spica ??? is it possible to unbrick it??
please help me .... thanks in advance
I have the same problem.. i flashed a too big bootlogo, and now phone does nothing at all..
Hope someone could give us some advice, because i have no warranty...
hi i have a jig which you can buy from ebay it puts my i5700 into download mode.still not sure if it will help because i was changing the firmware on mine and it just loads the boot screens. i have forgoton how to get recovery using the buttons,it allso does the galaxy s and s11
If you have flashed too big bootlogo, then end. Trully bricked.
USB jig doesn't work on Spica.
Samsung_saad: what did you do before brick spica?
Unbrick!!
addictivetips.com/mobile/one-click-unbrick-for-samsung-phones-having-odin-guide/
When I originally rooted my phone, I used Odin... I haven't tried this particular method for unbricking, but apparently it works.
Hope that helps
I tried the one click unbrick method. Wasent working for me.
In the original post it says that it works with all devices using Odin 3. Is a while ago, but i think to remember i was using Odin 2.x the last times for flashing.
Eaven it dident work for me, might still be worth a try for you.
The button combination for download mode is "volume down + camera + power"
As long as you can get into that mode you're safe and the phone is not bricked!
hi guys
i tried to flash a rom using odin but while it was uploading the firmware it got disconected
then it all happened
the screen just got black and the device didnt work at all
i cant log in into recovry mood non the download mood
nothing works
the device is dead
any ideas???
pleeeeeeeeeeeeeeeeeeeeeeeez help guys
its not even my device
the guy is all over me plz help asap
wich Rom did you Flash?
more information needed. Was it P6800, GT-P6210 Wifi Only? or verizon model?
you said Tab7, you may be in the wrong forum but thats OK, just describe the device as best as possible.
what is the exact firmware you tried to flash?
Disconnecting during a flash is very bad.
Do you have experience with Odin and flashing in general?
does the device seem to receive any power when plugged in?,
does your computer make any sounds when you connect the USB to it?
mmm lets see its p1000 and the rom was a stock rom ...
i had some experience in odin i flashed my galaxy s plus i9001 a hundred times with odin but this was the 1st time flashing a tab..
anyway the phone is dead no sign of any reaction in charging just blank screen
no sound from the computer when try to connect
nothing
bob wali said:
mmm lets see its p1000 and the rom was a stock rom ...
i had some experience in odin i flashed my galaxy s plus i9001 a hundred times with odin but this was the 1st time flashing a tab..
anyway the phone is dead no sign of any reaction in charging just blank screen
no sound from the computer when try to connect
nothing
Click to expand...
Click to collapse
The P1000 forum is here:
http://forum.xda-developers.com/forumdisplay.php?f=752
I guess you should post over there.
And this one will possibly help you: http://forum.xda-developers.com/showthread.php?t=1133590
Hi everyone,
I was wondering if I can get some help on getting my tab back on a road. Make long story short, here it goes.
OK. I was playing wit my tab last night and unfortunately it got stuck , nothing works , black screen. This happened after I tried to flash my tab to make calls with (Samsung TAB Euro Flash Package) From : http://forum.xda-developers.com/showthread.php?t=847273
At the time this happened my tab was rooted and I had a TWRP 2.3.3.1 and Goo Manager installed on ICS 4.0.4. I also saved all the backup files on my PC.
I was following the steps on a first page, after first flash something went wrong and now Odin doesn't recognize the tab as before. And it's being recognized by computer as a Qualcomm HS-USB QDLoader 9008 (COM4) . Now i'm lost and don't know what to do. Please lead me in a right direction. Thank you.
I would recommend to connect your tab to a charger and let it charge for 4-5 hours. Then try to connect to a computer USB port without ODIN. If you are lucky your tab will switch to a "Download" mode. Then you can start ODIN and reflash it.
The best would be to find recommendations how to get into "Download" mode in its native forum. I suspect that you flashed ROM compiled to a different processor. European 3G and US LTE Samsung Tabs use different processors. I don't think you managed to overwrite bootloader.
Good luck!
LTE 4G ! said:
Hi everyone,
I was wondering if I can get some help on getting my tab back on a road. Make long story short, here it goes.
OK. I was playing wit my tab last night and unfortunately it got stuck , nothing works , black screen. This happened after I tried to flash my tab to make calls with (Samsung TAB Euro Flash Package) From : http://forum.xda-developers.com/showthread.php?t=847273
At the time this happened my tab was rooted and I had a TWRP 2.3.3.1 and Goo Manager installed on ICS 4.0.4. I also saved all the backup files on my PC.
I was following the steps on a first page, after first flash something went wrong and now Odin doesn't recognize the tab as before. And it's being recognized by computer as a Qualcomm HS-USB QDLoader 9008 (COM4) . Now i'm lost and don't know what to do. Please lead me in a right direction. Thank you.
Click to expand...
Click to collapse
It sounds like your boot loaders got damaged. I have a thread for shv-e160l which covers some of what's required to repair that issue.
Its a sub forum under i717 at & t, work is underway to expand the repair list so although we don't support the device directly under the repair tools we can at least assist you
Darkspr1te
Sent from my A210 using xda app-developers app
Or maybe you flashed a P1000(Original Tab) firmware to you 8.9, did not research, had no idea, and are in bad shape; then posted in wrong section. Carelessness.
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
rajukhadka19782 said:
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
Click to expand...
Click to collapse
You must use ODIN
go to download mode then flash your rom
rajukhadka19782 said:
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
Click to expand...
Click to collapse
i have same problem after i install app from google play try to flash rom can,t find 1 that work
plz help.
you need to use odin to flash the stock firmware back going into download mode and for rom just visit - http://www.sammobile.com/ and download firmware from there just see you model and select you country and download latest stock rom and flash it or else tell me your model number and country i will provide you link
AmGaD-SaLaH said:
You must use ODIN
go to download mode then flash your rom
Click to expand...
Click to collapse
Thanks dude for the suggestion.
me 2
Me 2, I want to unbrick it how to download my firmware?
Galaxy Grand Prime SM-G530/H/DV is Not accepting ODIN connection
Galaxy Grand Prime SM-G530/H/DV
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
maq66 said:
Galaxy Grand Prime SM-G530/H/DV
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
Click to expand...
Click to collapse
Seems like the EFS partition is broken (IMEI Invalid)
If You don't have any backups done by custom recovery, well... You're probably done.
I am having a similar problem. After enabling KNOX, which I thought was just another antivirus, my phone rebooted, and just got stuck. It would go to the boot page, with the name, and then it would act like it was gonna go to my home screen, but the screen would go black and it would start over. I cleared the cache and factory wiped it, but still no luck. I didn't enable usb debugging, and from what I know there is no way to enable it. I need it to use odin to flash a rom and start over. any suggestions?
dineshjumani said:
you need to use odin to flash the stock firmware back going into download mode and for rom just visit - http://www.sammobile.com/ and download firmware from there just see you model and select you country and download latest stock rom and flash it or else tell me your model number and country i will provide you link
Click to expand...
Click to collapse
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
talvigi said:
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
Click to expand...
Click to collapse
I'm with the same problem! All solutions need to go to download or recovery mode, but I can't turn on my phone and Odin can't catch it! Please, could somebody help me?
Thanks!
lucas13garcia said:
I'm with the same problem! All solutions need to go to download or recovery mode, but I can't turn on my phone and Odin can't catch it! Please, could somebody help me?
Thanks!
Click to expand...
Click to collapse
Does your device start at all or not? if it starts tell me what do you see? Is the battery charged, anden have you tried Odin 1.87, and have you tired to flash repair firmware 4.4.4, please Try it and make sure to only flash BL file first.
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
Does your device start at all or not? if it starts tell me what do you see? Is the battery charged, anden have you tried Odin 1.87, and have you tired to flash repair firmware 4.4.4, please Try it and make sure to only flash BL file first.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Hey, thank you for the help!
It starts and it doesn't! With the battery, after I try to turn on, it keeps blinking repeatedly and stops only if I remove the battery. And my issue with any fix that I try to flash is that the computer doesn't recognize, probably cuz the blinking blue light is just a random light and not the phone actually trying to turn on... so Odin, for example, doesn't catch any device!
Is there any way to make the computer recognize it? I already tried some usb drivers, but nothing so far... BTW, I have a windows 10.
Thanks!
lucas13garcia said:
Hey, thank you for the help!
It starts and it doesn't! With the battery, after I try to turn on, it keeps blinking repeatedly and stops only if I remove the battery. And my issue with any fix that I try to flash is that the computer doesn't recognize, probably cuz the blinking blue light is just a random light and not the phone actually trying to turn on... so Odin, for example, doesn't catch any device!
Is there any way to make the computer recognize it? I already tried some usb drivers, but nothing so far... BTW, I have a windows 10.
Thanks!
Click to expand...
Click to collapse
Well Windows 10 64bit has been creating problems for many many people in the forum and I have seen people running vm and win 7 for the best results. And something very important I must say is that, most of the new computers do have USB 2.0 ports but they are limited in number, so you should find one on ur PC, to us it specifically for phone tweaking softwares. I would suggest you find another PC or laptop around,
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
Click to expand...
Click to collapse
Without recovery or Download mode, you'll need to take it to someone with a black box or jtag.
If you can access a working phone of your same model, you can boot download mode from sd
http://forum.xda-developers.com/grand-prime/development/fix-g530-debrick-img-guide-to-make-t3422115
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
mrunank said:
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
Click to expand...
Click to collapse
What happens when you go to download mode?
---------- Post added at 06:10 PM ---------- Previous post was at 06:09 PM ----------
mrunank said:
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
Click to expand...
Click to collapse
Did you try wiping cache and what is your model?
waleeds1 said:
What happens when you go to download mode?
---------- Post added at 06:10 PM ---------- Previous post was at 06:09 PM ----------
Did you try wiping cache and what is your model?
Click to expand...
Click to collapse
My model is SM530H I cannot enter the recovery mode to wipe the cache . When I try to go into the recovery mode, samsung logo flashes and then the screen goes blank. Same thing happens when i try to normally switch on the phone
mrunank said:
My model is SM530H I cannot enter the recovery mode to wipe the cache . When I try to go into the recovery mode, samsung logo flashes and then the screen goes blank. Same thing happens when i try to normally switch on the phone
Click to expand...
Click to collapse
What about download mode? Btw it should not go to logo it should go to recovery after bootimage. You should hold down power home and volume down untill download mode comes or power home and volume up untill recovery menu comes
[Q] Galaxy Note 3(N9005) - HARD BRICKED, Detected on PC as "QHSUSB_BULK" device
My Note 3 (SM N9005 - Lollipop Version) has been hard bricked. It doesn't powering up, no sign of any light/vibration. Looks like a dead phone.
When I connect my phone on PC, Device manager detect it as "QHSUSB_BULK" device. But on Odin 3.09 it doesn't detect anything.
Please please help me, PLEASE...........
Olyul said:
My Note 3 (SM N9005 - Lollipop Version) has been hard bricked. It doesn't powering up, no sign of any light/vibration. Looks like a dead phone.
When I connect my phone on PC, Device manager detect it as "QHSUSB_BULK" device. But on Odin 3.09 it doesn't detect anything.
Please please help me, PLEASE...........
Click to expand...
Click to collapse
Possible solution: HERE.
Joku1981 said:
Possible solution: HERE.
Click to expand...
Click to collapse
I have tried, it didn't work. I was using lollipop version.
debrick.img didn't work as I couldn't find the image file of lollipop.
PLEASE HELP ME TO GET OUT OF THIS PROBLEM!!!
Same here, i have a N9005 and tried all debrick img's present in the forums with a 32gb SD Card and no success.
Is there a Lollipop debrick image? Or if i have access to another N9005 (without root) how can i create one?
Regards.
N9005 Lollipop brick
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode and is detected by odin, but re flashing the firmware always fails.....is there a solution for this.....please help
mjmbirige said:
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode and is detected by odin, but re flashing the firmware always fails.....is there a solution for this.....please help
Click to expand...
Click to collapse
spamming please
Dear all,
Could somebody help me please. My Note 3 LTE (N9005) can not make/ receive calls. I can use internet, play song, etc...
When I make/ receive call phone is hanging too long and also call is can not reach to another phone.
I have tried to fix too many way.
1. EFS restore.
2. Cache clear (even flash new rom also)
3. Update kernel.
4. Restore my old working backup before.
PS. I'm using Audax ROM (lolipop).
I hope someone can help me out from this things.
Thanks in advance.