Related
Upgraded to the new 1.60 ROM hoping to cure this annoying problem but if anything its worse.
I turn the phone off and within 5 minutes its turned itself back on for no apparent reason. No notifications or anything. Cant be doing my battery life any good if it keeps switching on
Any ideas?
That may be something to do with the way that ActiveSync is set up.
I've had this kind of problem in the past and found that by killing activesync by using a task manager of some variety and changing my 'network' settings that the problem goes away
Please excuse me, im quite a newbie at this xda malarky. My xda also turns its self on randomly since installing 2003. you said change your network settings. How and what do you change them to? I made sure that activsync is turned off, but it doesnt make much difference either way.
cheers
I have experienced the same...
And, I've been on multiple ROM's with no avail.
I'm not sure anyone has ever found a solution.
My activesync is turned off, but the damned thing keeps turning on. Its sitting in the cradle at present and it turns on every 3-4 minutes!!!
It is Active Sync
I had this problem with my charger in the car. It is not sufficient to kill the Activesync. You would have to go to the options in the Activesyn menu, go to the new options button in the PC tab (the first one) and there disable the box with the name "Enable PC sync using this connection". This you will have to enable each time you want to sync via the cradle. I don't have the problem in the original cradle, it is only with the thirdparty car charger. I sync via IR or bluetooth and that is always available via the menu in Active Sync.
Good luck!
Johan
ActiveSync i can understand when its in the cradle but currently its sitting on my desk and still turning on at random intervals sometimes 30 secs after i switch it off!!!
Signal strength maybe?
I have same problem, happens mostly in car but not exclusively.
I get the feeling that it's related to the cellular signal strength and the device loosing or regaining the GSM connection.
San Francisco has several zero or almost zero coverage areas so it's not unusual for a phone to loose and then regain a connection while driving or walking.
I would love this device if it worked as expected but at this moment it is the source of endless frustration.
im also having these problems they are head doing never used to turn itself on as soon as i hard reset it just started to do this now and its annoying me so much
Im also having these problems . I find a solution using registry cleaner of pocket mechanic.
Bye
Guys, Check the setting of the ActivSync, most probably you will find a schedule for synchronization is set every certain time. So, you have to switch it to Manual Sync.
I think this should soulve your problem.
Sprite Backup
I too had this problem. For some reason the enabling Sprite Backup battery monitoring and Scheduled Backups caused this. try turning these features off if you have it installed.
I have same problem, its really anoying, have not found a way to stop auto connection even after changing some setting on my computer Activesync & XDAii activesync. I'm guessing theres no way to stop it.
Is there an active sync update available? I'm using 3.7 (build 3083)
For those whose unit turns on by itself, please check:
From your PPC:
Start > ActiveSync > Tools> Options > Mobile Schedule
Make sure all 3 options are set to "Manually".
From your Desktop PC ActiveSync:
Tools > Options > Schedule
Make sure every active options are set to "Manually" as well.
You can manually sync but Activesync still keeps "looking for changes"
I need for help plsssss
if some body plsssss attch the last eddition of xda2nbftools because I am living in Saudi Arabia, and the web site to can download this file is BLOCKED here in Saudi Arabia, they are blocking web sites here then u can't open it at all and no way to can download it unless if it attached here in this forum
Here is it:
Same for me too,
Mine can turn itself on almost as soon as i turn it off, its a running battle to get it to turn off and i very rarely win, I have accepted the fact that mine will stay on most of the time now and have a second battery to help me through the day,
I checked all my settings and all mobile schedule settings were on manual and all the active options are set to manual too, so it wasnt those settings causing the problem,
I cant believe the lack of support that O2 are providing, if this was an HP handheld there would have been a fix for each problem as it cropped up within a week as they have done with each of their handhelds
do the people experiancing turn ons have a card in the Sd slot? i do but i notice when the device is off...... put a sd card in and the device turns itself on i only started to notice it turning on when i got my SD card i might take it out tonight and try then?
Yup, i have a card in the slot all the time, took it out for a few hours this morning and it was no different, still kept turning itself on,
I looked a bit deeper into it this morning too,
It seems that i use it, turn it off and it turns back on 13 seconds later, i turn it off again and it turns itself back on again 13 seconds later, so i try to turn it off and the power button has no effect, i have to press it twice to turn it off, then it seems to stay off for at least 30 minutes before going through the exact same sequence again,
I will list all my installed programs a bit later when i have more time, hopefully everone else can do the same (whether you have the problem or not) then we can see if there's a common program that is on all the XDA2's that might be making them turn on and see if its absent from the XDA2's that are fine
I have a question. I've only had a WM5 device for about 9 months now. I now have Cingular 8525 and for the past 5 days I have left it on overnight only to find it frozen, won't wake up in the morning and the battery drained.
I did the Activesync hack, scanned the notifications queue and did not see any notifications for midnight on the dates the device would not wake up.
Its frustrating.
I was wondering if WM5 did some form of house cleaning nightly. It seems that this house cleaning wakes up the device and somewhere it freezes on and finally the battery gives out. I don't have any backup software going on.. Nothing. I just find the device won't wake up, won't even soft reset. Plug it in for a minute, then it soft resets with a dead battery.
I am going to look at the notifications queue tonight and delete any notifications I see that are for 0:00 and tomorrow and see what happens.
I am hard resetting it Monday and re-installing if I can't figure it out. It has been really annoying these last 5 mornings.
Sometime when I reboot I see a NO GSM message. Then get no radio, then about 10 minutes later I get service. But the password and the userid on the wap data connection has been erased and my bonded blue tooth headset password is forgotten, the device is there but it prompts me to bond with a passkey when I go to intiate the headset...
Thanks for your thoughts
This has, I believe, alot to do with your microSD card - see the link below.
http://forum.xda-developers.com/showthread.php?t=284636
Thanks I'll check it out. I do have a sd card in the device. It may be the cause.
Thanks.
I use SPB Backup, to initiate automated reboots. What it does is back up to ur microsd and then initiate a reboot. i do this every second night. which is cool, keeps the fone fast.
Nightly lockups were a pain in the neck for me - I have had 2 Orange M3100 and both suffered the same nightly lockup issues.
I found that 4 things have fixed the issues and i found that all 4 have to be done
1. Fake server trick
http://www.aximsite.com/boards/showthread.php?t=112638
But i found that not deleting the new server works fine
2. Untick Enable Advanced Network Functionality
Under Settings\Connections\USB to PC
3. Stopping Activesync running when not needed
In the notification queue there are 3 entries to start replog.exe (activesync)
you can safely delete the instruction to start after time change - This will stop Activesync from running.
NB the other 2 need to be there, do not delete any other notification of replog.exe
4. Never leave activesync running so always do a soft reset after syncing or at least before you charge the phone.
Not saying that these will work for everyone but they have worked for me on both phones.
try XBar. It incorporates cron, so you can schedule whatever program to run whenever you want it. Grap a copy of quickreset and run it. It will reset the Tytn at whatever time you set it for. I have mine resetting at 5 in the morning.
You may disable the standby mode when the unit on the external power supply. I have done, and I think it's not a big deal and it does not worth to struggle with locks on wakeups with external power!
I having a sort of similar 'morning trouble' with my TyTN, but limited to GSM connectivity. When I wake up, I am most of the cases disconnected from network with 'No service' message in the baloon. Searching for network is unsuccessful, nothing works until I soft reset the device.
Just a thought: You do have the "poweroff after x minutes" setting checked right?
I had what I thought was the same issue this morning, but it was caused by me unchecking the above setting (I do this during meetings when I'm using my BT keyboard) the previous day. This morning, while it was still dark out, I pressed the power button and nothing (the backlight was off and this actually put it into powersave mode). I pressed it again and still nothing (device came out of powersave mode with backlight still off). Because it was dark when I did this, I initially thought that I had the "won't return from powersave" problem.
machmandp said:
Nightly lockups were a pain in the neck for me - I have had 2 Orange M3100 and both suffered the same nightly lockup issues.
I found that 4 things have fixed the issues and i found that all 4 have to be done
1. Fake server trick
http://www.aximsite.com/boards/showthread.php?t=112638
But i found that not deleting the new server works fine
2. Untick Enable Advanced Network Functionality
Under Settings\Connections\USB to PC
3. Stopping Activesync running when not needed
In the notification queue there are 3 entries to start replog.exe (activesync)
you can safely delete the instruction to start after time change - This will stop Activesync from running.
NB the other 2 need to be there, do not delete any other notification of replog.exe
4. Never leave activesync running so always do a soft reset after syncing or at least before you charge the phone.
Not saying that these will work for everyone but they have worked for me on both phones.
Click to expand...
Click to collapse
I have a similar problem. Every monring when the device is still plugged on the wall charger, it hangs before I wake up. I would therefore miss a lot of calls or other notifications. I have done the defragmentation of the card, but it still doing the same thing every morning.
I have also tried all your steps above, ecept step 3, which I need your assistance as to how to delete the particular file you were referring to.
Many thanks in advance.
marsb007 said:
try XBar. It incorporates cron, so you can schedule whatever program to run whenever you want it. Grap a copy of quickreset and run it. It will reset the Tytn at whatever time you set it for. I have mine resetting at 5 in the morning.
Click to expand...
Click to collapse
holy crap, i thought i was the only one that used xbar.. i have been using this program for 2 or 3 years, this is my one and only must have program!! FYI 3.2 beta was released
anyway.. on to this problem, i used to have this on my wizard, what i found was that plugging it and leaving it on would cause the lock up. Now when i plug it in i hit the power button and havent experienced it since on my wizard or on my 8525 yet. and i still get all of my push mails etc.. however i will say that if i get a call or text while im sleeping the device does wake up and the screen stays on..
another program you might want to try is SKSchema... they have several scripts that you can run, including a soft reset at a certain time. I also use the script which allows me to toggle between 3G/UMTS to save battery when I don't need 3G.
"Fake Server" did not work for me
Tried what is outlined - fake server, soft-re-boot, stopping activesync. Not sure how to delete the specific files in the notification queue.
Worked for one night! Next night back to the sleeping Tytn.
I am going to try spbTime to trigger an alarm at 12:01am and see if that helps.
TyTn does not "die" anymore!
The fake server is definitely part of the answer. As is stopping ActiveSynch. This needs to be combined with one other suggestion made on the forum of leaving the unit on when plugged in. This however has the potential drawback of "burning" the screen with the same image as when left powered on.
In addition to Activesynch, the problem is with the Notification queue (again as someone suggested on this forum). In the Suspend/Sleep mode under power, the unit cannot notify and goes into a perpetual loop.
Here is what I did that has now worked for 11 days. I installed spb PocketPlus and placed the "Screen Toggle" icon on the main screen. (According to spb, "Toggle" simply blanks the screen but does not put it to sleep/Suspend). So when I plug the unit in to charge it, I simply "toggle" the screen. The screen is blank (just like "Sleep"/"Suspend") but the unit is powered up. This has the added benefit of allowing you to listen to music with the screen blank.
I have now gotten to "toggling" even under battery power. Miraculously, my intermittent BT and Wi Fi issues have also disappeared. There may be cheaper solutions than buying Pocket Plus, but spb's Pocket Plus is convenient and has some other nice features.
Mortsaver might be a cheaper option?
Active Sync
I don't know if any of you have tried Active Sync "beta" 4.5". Its seems to have fixed many of my problems with connection and some of the issues described here.
flane
coolshot said:
This however has the potential drawback of "burning" the screen with the same image as when left powered on.
Click to expand...
Click to collapse
This problem affects CRT and plasma displays (phosphor based), but not TFT.
I just got AMEO from T mobile which I believe the same as HTC advantage.
despite of being SIM locked by T-mobile, I am experiencing another problem in waking up the device after it goes into sleep mode.
After I left the device idle for few minutes, it turn the whole screen off. (not only the back lit).
I can see the LED for BT/wifi still blinking.
But no matter which button I press, it couldn't be turn on at all.
As final resolve, I have to soft reset the device every time after it sleep!!!
Can some experts here advise me? is it a defective unit? or some other settings are wrong? Do I need to return it to the vendor?
I don't want to keep the device always on by disabling the auto off feature in power setting either.
Does someone have the same problem like me?
Thanks for any advise in advance.
What happens if you put it on the keyboard while "asleep"? Even if it means taking it off there first.
If doing that and pushing the power button fail to turn it on, it's a defective unit.
it's the same problem even i attach it to the keyboard.
a bit funny though, if i press the power button from the side to turn it off. I won't have any problem to turn it on.
but if i leave it to auto off mode, then i can't turn it on until resetting it from the back hole.
can it be improved if I flash to other ROM?
My Ameo does it occasionally - I find that (re)attaching the keyboard tends to bring it out of sleep better than pressing the power button. I get the impression that by pressing the power button, it sometimes gets confused that its still on and tries to turn itself off (even when it is already off). Tends to lead to a reboot every few days though. Waiting (fingers x'd) for WM6 to see if it behaves better.
do you guys have this option
settings>button>lock
try to toggle the checkbox to see if it helps
I'll try it! I found it under Settings/System Tab, 'Key Lock' icon.
I'll report back within the week.
I can confirm that it doesn't help my AMEO.
anyway, thank for your thought.
Digital.Diablo said:
I'll try it! I found it under Settings/System Tab, 'Key Lock' icon.
I'll report back within the week.
Click to expand...
Click to collapse
To digital:
can I ask for a favor from you. could you try to make the device auto power off without sim card in.
and see whether u will have the exact problem i have or more frequent it dead...
due to my unit is locked to T mobile network, i still haven't put any sim card in.
Tried it without simcard in but it still turns on ok after the fix. TBH, sounds like you're getting the issue more than me - mine only does it occasionally (once every couple-3days) and as yet, I've not managed to locate a consistent cause. I'll keep my eye on it though with the fix and let you all know how I get on.
the other thing that i can think of out of at the moment is that you are running some prog from the sd card/microdrive in the background so when you try to switch your device on then it does not get started and hence the problem...
try tweaks2k (you can use the trial version)
it has a bunch of settings for this... (just check that it is compatible with ameo first)
install 'screenoff' and assign to one of the button.
it works fine.
have to make work around like this now. no idea why this problem only happen to my AMEO...
anyway, thanks for all of u!
royalmail said:
Does someone have the same problem like me?
Click to expand...
Click to collapse
I have a similar problem. My device does not wake up in one case from 10 approximately.
Frequency of occurrence of a problem decreases if to close the phone's program compulsorily.
In other branch to me have told, that the problem can be because of the Active Sink's program. Have allowed advice to disconnect automatic start of this program. But I cannot check up because my program all the same is started if to switch off an option of the automatic device. :-(
hard reset can solve the problem completely. ;-)
I'm pleased to say that the 'button' tweak posted here has worked... So far!
Thanks Gents (and lasses if there are any).
That happened to me too yesterday.
I hard reset it and reinstalled everything to microdrive now. (trying to eliminate the possiblity of compaction thread) Removed SPB Pocket plus, which I've come to be quite suspecious by now. Also removed true VGA. So far I have not got a single freeze yet, touch wood. If it runs okay for a few more weeks with no freezing, will put back true VGA and see how it goes again. Will try to isolate the offending software bit by bit.
Hi,
I've had the same problem with my Advantage
After some weeks of test i have found how to solve the problem on my Advantage. perhaps it's only works on mine but you can try.
i have installed "all" progs on memory and not on microdrive. on microdrive i have only a few exe like wififofum or progs not intend to run when i turn my Athena off.
then no more problem waking up my athena.
I think the problem could be that microdrive cause a time out or thing like this when we wake up the PDA then athena freeze waiting about datas from microdrive.
then for me now it's programs like browsers, sscontact, traylaunchers etc .. => memory
programs like painting tool, etc ... => microdrive and close (kill process) them before sleep mode.
and all is ok now for me. The only freeze in 1 week was Pocket IE freezing (but the reason is pocket IE sucks)
There was actually another point that I forgot to mention concerning the freezing. I found out that the free miniSD card came with the bonus pack was actually faulty. With the pocket mechanic professional benchmark, I managed to see only less than 200kb/s read and write! I did a hard reset, and installed everything on microdrive, and touch wood, I have not got a single reset or freezing yet these two days. I install nothing into memory, as we all know that it takes up to 2 seconds to write a block of data into NOR ROM, which is why we should always shift our directory of IE cookies/history/cache away from the main memory. Since the main memory (NOR ROM) is good for executing program in place but terrible in writing, Microsoft's MikeCal thinks we should not keep any data there. (See this thread: http://blogs.msdn.com/windowsmobile/archive/2006/03/16/552996.aspx ). I try to keep the memory as free as possible to minimise compaction thread kikcing in. Will see how it goes in the next couple of weeks and take on from there.
I'm happy to confirm that, after a weeks testing, the button 'fix' seems to have resolved the issue! Thanks all.
I have been experiencing similar problems.
After being left on standby for a period of time (>10mins), the unit sometimes goes into "autistic" mode.
i.e:
Power button does not function. Unit GSM light flashes, but will not resume from sleep.
I've tried the following:
Attaching USB cable. No change.
Attaching keyboard. No change.
Calling phone. No change.
Soft reset. Starts ok.
I have now tried:
Settings/System/Key Lock
- set to 'Do not lock buttons'
However, I suspect ActiveSync.
The unit was attempting to Sync every 5 minutes, while connected with a USB cable. I therefore followed advise (read elsewhere) to create a dummy server to allow an ActiveSync schedule to be created, then deleted.
http://www.modaco.com/index.php?showtopic=246522
This is coincident with the start of the problem.
Regards
Devany said:
I have been experiencing similar problems.
After being left on standby for a period of time (>10mins), the unit sometimes goes into "autistic" mode.
i.e:
Power button does not function. Unit GSM light flashes, but will not resume from sleep.
I've tried the following:
I have now tried:
Settings/System/Key Lock
- set to 'Do not lock buttons'
Click to expand...
Click to collapse
I had same problem once I enabled Key Lock function.
However, once I disable key lock, it works fine again.
Hello, I got my new device on the 3rd Jan so it's still relatively new and vanilla. I have had a look here through FAQs and searched the X1 forum to no avail. I hope these are not too difficult to answer, many thanks for any advice
1. Freezing:
When I make a call the touch screen no longer takes touch inputs, it does display the call time etc. I have to end the call with the soft button then the screen comes back to life
Also, when I run Windows Media Player and start playing a track the same behaviour occurs and I timed a 2 minute delay before I could use the screen to do anything.
I am not running anything in the background when this happens
All I have installed on top of the new phone (<1 week old) is a torchbutton tool and a battery monitor (although his happened way before the battery monitor was installed)
2. Auto disconnect from 3G etc:
When I set my phone to auto check email for me I didn't realise it would leave the 3G connection running. I can't find anywhere to set this and have it shut down the connection when done. I am not worried about cost (much) but I do want to preserve battery lif.
3. GPS way off:
everytime I try the Vodafone tracker or google maps it never pinpoints my location accurately. I don't want this directing me into a river or car crushers at a scrap yard...
Any ideas?
I don't know about the other two questions but as for number 1) I'd say it's a fault with your device as i haven't heard of the problem before and i have no such issue with my Xperia. Maybe someone can help you...
Question 2
It seems by default you have to disconnect in Comm Manager.
Actually it's great it does not disconnect after every action, it would be hell to check 3 or 4 email accounts and connect each time (I had it on my other smartphone...)
OK I can live with the disconnecting thing, I'll just have to keep an eye on it and the battery usage.
I found something interesting with the media player freezing issue though, if I use the button on the side to adjust volume the screen become available in the volume slider and then the problem goes away, rather random but again - livable if this fix works every time (which it doesn't) I have noticed it seems to be the same tracks that cause this - is it the file size?
Still stumped for the screen freeze during calls though - fix that and I will sing your praises for at least a week and a half
OK The device got replaced... then broke again - ran out of power then wouldn't take a charge
Came back from repair (they wouldn't replace after the 14 days grrr damn vodafone)
Now it has new software on it (spb mobile shell and some random games)
I setup the stuff I like such as the Soft Buttons set to Rotate screen and bring up the Today screen
Now when on the X panel or any of the panels and Opera the Today button refuses to work
It is fine in IE or File Explorer
I am so sick of this damn thing getting so close to being useable and then dropping out on me
Any ideas before I have to go back to the shop and they send it away AGAIN?
Hi,
Has anyone noticed that the Diamond2 always returns to the home screen after comming out of lock mode or standby?
For example, i could be listening to music, after 5 mins of me not using the screen, the phone would lock. On entering the PIN, the TouchFlo retuns to the home screen, instead of my music app. Same goes for any other app on the TouchFlo. My previous Touch Pro came back to the last opened app on TouchFlo.
Not a huge problem but would be good if there was a tweak to stop this behaviour.
M
mgumbs said:
Hi,
Has anyone noticed that the Diamond2 always returns to the home screen after comming out of lock mode or standby?
For example, i could be listening to music, after 5 mins of me not using the screen, the phone would lock. On entering the PIN, the TouchFlo retuns to the home screen, instead of my music app. Same goes for any other app on the TouchFlo. My previous Touch Pro came back to the last opened app on TouchFlo.
Not a huge problem but would be good if there was a tweak to stop this behaviour.
M
Click to expand...
Click to collapse
I dont think that the people here see it as a problem like you and myself I started a thread weeks ago
http://forum.xda-developers.com/showthread.php?t=507358
1300 views but still no solution, its prob too hard to do Dammm HTC
Martyn
Ps if you find a solution please let me know
I also experienced a problem with switching screens when turning the device back on. Uninstalling TouchLockPro solved the problem for me...
@Brempie
I took your comment about uninstalling TouchLockPro. I didnt have that program installed but i took the PIN lock off my phone temporarily, and hey presto, phone works as it should!
So now we know what causes the problem, hopefully HTC will have a fix for it....eventually.
I'll live with the bug for the moment, i prefer a phone which is PIN locked.
Cheers,
M
I have never had this happen to me. I also installed throttle lock and it always goes back to where it was when I unlock. I just uninstalled throttle lock and did a soft reset to test and make sure it never reverted back to the home screen. Nothing.
No matter what program I am in it wakes up to that same spot. I don't know what the registry hack for this is but there probably is one.
Could you possibly try this? Install ThrotleLock v0.6 and then see if it will work. If it wakes back up to the same screen and not TF3D uninstall it and see if it goes back to TF3D or not.
*warming up this thread*
So, has anyone yet found a solution for this?
It's annoying for me as i have set the device to go to standby after 2 minutes of inactivity when on battery. When i listen to music with the musicplayer in foreground, or when i write an email and someone interrupts me, i put the device in standby by myself or it does automatically after the defined time.
In 95-99%, when i turn back on the device, it has returned back to the touchflo home screen. Very rarely, and it could not yet find any system, the device wakes up exactly where i left it. This is, what it should do everytime but sadly it doesn't.
I'm using the Stock-ROM, activated PIN-Lock of my SIM, having a (WinMobile default) device Lock (4-digits) set to activate after 24 hours (this way it does not activate itself during normal usage, unless i long-press the end-call-button), using 2ndToday with SPB Diary.
It gets more annoying for me every day, because especially during working time i frequently turn the device on and off. Reading RSS-news, turning the device off for an incoming call, turning the device on just to get welcomed by the home-screen instead of staying on the news i previously read isn't that comfortable
Having to open the taskmanager and reactivating the program means at least two more clicks everytime i use the device... so - any solution?
edit: I think i tracked down the source of the problem, watch in this thread:
http://forum.xda-developers.com/showpost.php?p=4366357&postcount=14