Related
Hey all,
i have found a new mms program that is currently in beta testing that seems to work so far in wm05. the address is http://electricpocket.com/products/pixermms.html you can find the download there near the bottom, the correct one is where it mentions xda.
i however am unable to test send/receive features because i cant work out how to set up gprs/wap in magneto some help with this would be appreciated.
THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
try any of this three cab see which one will work for you
MMS
I wasn't able to get this to work. Stayed stuck on "0% Connecting" even when my GPRS connection was established prior. Funnily enough, if i DIDN'T establish the GPRS connection manually then it said "Authentication OK" even though it wasn't connected to anything! Then it would just hang.
I have to soft-reset to get out of it as "Cancel" does not work.
Using:
WM2005 1.50g
Radio 1.17
i-mate PocketPC
Vodafone NZ
I have not had any joy with MMS Composor 2.0.0.20 for Magneto either (hence why I'm trying this). I am about to install EzWAP 2.5 and try that again. Had some issues with it though, will try again. MMS is just handy to have. You wonder what messages you're missing out on without it
toenailed said:
THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
Click to expand...
Click to collapse
Toenailed,
Does this use the Smart/Globe MMS Settings or the Smart/Globe Internet(GPRS) Settings from the Autoconfig app?
Thanks
Sending is work perfectly, but the receive...
pixar 4
hello to all
i have allready tryed that prog and it keeps saying that the messege was reject for unknon reason and to check my card for mms etc
card as mms enable
it says that allways the diference now is the international nunber format now it says 10% 20% to 100% them it gives me the error
i manualy conect but no luck
so i get Messagw rejected- no reason given
wap service unavailable
Please check with you operator ....etc etc
help needed
thanks
toenailed said:
THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
Click to expand...
Click to collapse
Toe,
Could you post your settings for Pixer4?
My settings are below and I cant seem to send nor receive..
Thanks..
hi jenellej.. just run the GPRS cab ..
under in Service use Globe MMS Settings or Smart MMS Settings or Sun MMS Settings
for sun
"Gateway"="202.138.159.78"
"MMS URL"="http://mmscenter.suncellular.com.ph"
for GLobe
"MMS URL"="http://192.40.100.22:10021/mmsc"
"Gateway"="192.40.100.20"
for Smart
"MMS URL"="http://10.102.61.238:8002"
"Gateway"="10.102.61.46"
i already try the GLOBE and SUN .. but i havent try it with SMART yet
one last thing .. during sending .. the connectivity will not popup that it is connecting to GPRS .. but Pixer4 will say it connects .. suprisingly it does send without the GPRS Connecting notification appeared .. so its normal that you though it doesnt established a connection but in fact it does ..
PS Dont install also ArcSoft MMS COmposer
I manually configured my connection settings. But there should be no problem using toenailed cab. I used to have problems, maybe because it causes conflict with Arcsoft MMS. I uninstalled it, then it worked!
still doenst work
can ´t get it ti work in vodafone.pt i have tryed every possible combination and still get the message rejected for unknown reason
i will not give up lol
gateway 213.30.27.63
url http://mms/servlets/mms
port 9201
After sending--- device Hang
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.
Re: After sending--- device Hang
muhelen said:
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.
Click to expand...
Click to collapse
it takes time for it to send. just wait for it. it will seem it hanged but in fact it isn't. it takes time on "authenticated-ok" but after a while, it goes on smoothly.
for SMART (philippines):
here's the settings for Pixer..
Start/Settings/Connections/Connections
Click Advanced Tab, choose Select Networks
Under "Programs that automatically connect to the Internet should connect using:", click new.
Under General Tab:
Enter a name for these settings: Smart MMS
Under Modem Tab:
Tap new, enter a name for the connection, select "Cellular line (GPRS)" then tap next.
Access point name: mms
Click Next then Finish.
NOw open Pixer4.
Tap Options/Preferences/Advanced.
Wap Gateway IP Address:
10.102.61.46
MMS URL:
http://10.102.61.238:8002
Service:
Smart MMS
Click OK, check "Get Message Immediately" then OK.
for GLOBE and SUN settings, refer to toenailed's post above.
i was working on a cab with toenailed's help (thanks toe!!!), but i still can't get it to work. maybe later i'll figure it out when i'm not too busy. :wink:
I can send using Pixer4 on the Orange network. Not sure about receiving yet.
My Pixer4 settings:
Wap Gateway IP Address:
192.168.224.10
MMS URL:
http://mms.orange.co.uk
Service:
Orange MMS
works perfectly on sending MMS message (Etisalat) Operator & 1.5 WM but recieving is not working even when retrieve option is ticked, but that could be because of the workarounds am doing with MMS composer, am trying to replace the pop3 account in my inbox with MMS composer but no success so far :shock:
How abaut EzWAP MMS
i'm not try it yet but i thought it work.... :roll:
Re: After sending--- device Hang
mariolouis said:
muhelen said:
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.
Click to expand...
Click to collapse
it takes time for it to send. just wait for it. it will seem it hanged but in fact it isn't. it takes time on "authenticated-ok" but after a while, it goes on smoothly.
Click to expand...
Click to collapse
mariolouis, thanks for the explanation. It's really take time to send. Infact, I'm waiting more than 10 minutes, but still the same!
try this MMS Composser
this two cab must instaled
Re: try this MMS Composser
mwilmar said:
this two cab must instaled
Click to expand...
Click to collapse
Are these files the same ones with WM2003SE(Arcsoft?)? Or is the MMS Composer also Pixer?
Re: try this MMS Composser
jenellej said:
mwilmar said:
this two cab must instaled
Click to expand...
Click to collapse
Are these files the same ones with WM2003SE(Arcsoft?)? Or is the MMS Composer also Pixer?
Click to expand...
Click to collapse
Arcsoft MMS Composer 1.6
It appears this nice device (or at least all of WM5 devices) are not yet enough considered from SP as I cannot find any setup and/or settings for MMS and WEB connection settings anywhere...
www.clubimate.com only supply any kind of settings for any other SP but VODAFONE ITALY...
Their support (I-Mate) is also not present (I even tried calling them while in Dubai with no luck).
At VODAFONE Customer Service there are only chances to use the automated answering system or the website and again no one of them considers WM5 devices...
ANY HINT ???
With manual settings I entered I can do MMS -OR- WEB but I cannot get it configured to "automagically" use one of the two when needed. I always have to manually switch between them... :-(
Again: ANY HINT ???
Thanks a lot.
Hi Michele,
I am Italian too. Why do you switch them manually? In Connections/Advanced, the default connection should be not be the MMS one, but the internet one (APN: web.omnitel.it). The one used for MMS will be defined here but NOT selected as default. This needs to be indicated in MMS configuration in the Messaging application.
The problem that I have (with a Worldwide English K-Jam) is that I just can't make MMS work. I have tried all settings based on Vodafone Italy indications, but no joy.
Would you tell me your detailed settings to make it work?
Thanks.
Massimo
..
Thanks for this!
This is however not suitable for me, as I live in two countries (UK and Italy), and I do not want to hard reset just to fix my Italian MMS settings.
Would you be able to just give me your Voda IT MMS settings?
What I have done is:
1) Created a new connection with APN = mms.vodafone.it (everything else is default)
2) Created a new set of MMS settings in the MMS application, with:
Gateway = 10.128.224.10
Server = http://mms.vodafone.it/servlets/mms
Port number = 80
Connect via = the above created connection
WAP version = with this I am unsure, I tried both settings, but no joy.
With these settings, the phone tries to send or retrieve MMS's, correctly connecting to the APN and exchanging data. However I always get a vague error message in the end.
Can you let me know what you have done differently?
Thanks.
..
Many thanks for this!
I modified the config based on your comments. At a later stage I also went into the registry and manually modified some settings that looked different in your list. Still no joy!!!
:roll:
I am particularly puzzled by the Profile parameter, pointing to an XML file in a website. You claim this is very important. The default one points to a different XML file.
Question: how would the messaging application use this info? I mean, it is not possible to go out to the web using the MMS APN, so how is this Profile URL used?
I also tried to soft reset after changing that, still no joy....
..
..
Thanks for your great help.
Just to clarify, I normally live in the UK, but in this period I am in Italy, this is why I am configuring MMS on my Italian SIM card from Vodafone Italy.
And I've got very good news: everything now works!
I am not really sure how, I simply reset everything back to my original config, doing a few soft resets in between, and now I can send and receive MMS's.
By the way, that IP must only be used in the Gateway field in MMS configuration. Using it as the IP in the connection panel makes it impossible for the phone to connect to the APN (which is logical).
Again thanks for your help.
i flashed a new rom today for the first time.. Windows Mobile 6 Professional Tri-Syndicate Edition by Antc and i have two questions.
One is when i try to compose new mms ,the windows ppc hour glass (colored circle) icon keeps going around like it is searching but never stops and i have to reset my phone. is there settings or something i have to alter to be able to send mms again.
Also , I am having a prob configuring my email... you know how on an official tmobile rom they have the set-up email cab and you can just click download settings for email and just select which ones you have and they will automatically add... how can i do this on this rom .. i dont know all the exact settings for my emails (aol and one for my college) is there a way to get the settings to automatically configure
Please help .. thanks very much!
use this cab it sets all the settings for mms that you need.
go to the mms settings and in the severs make tmobile mms the default
if you cant find the mms settings easily you may have the new mms composer so fallow these instructions
after you install make a new mms message and choose custom and go to menu> options > MMS options> servers> And make t-moble mms to default > ok> cancel message> and you are done
this will fix your mms problem
thanks a whole lot i mgonna try this now.. but i just realized my internet isnt workig eihter do you know the correct settings for the gprs?
Edit: nevermind after searching some more i found my answer just hoping the mms thing will work now
Hiya
Ok so ive had my x1 a couple of weeks now and love it to bits, however im really struggling with mms and wondered if anyone else has the same problem or if theres a tweak for it
Im on three network in the UK, and have got all the right settings on it .. I can send sms, and can connect to the internet via my network, but when I try to send an mms it will let me compose it but wont send. It just sits in my outbox looking pretty but refuses to go!
Any help would be greatly appreciated .. thanks
Mella
Go into you sms\mms folder (where your sms's are)
Go Menu. MMS Options
Goto the Servers tab and check that it is using the correct mms server
You have to create a new connection for mms, and set it to default for mms so it changes connection when sending mms messeges
Hiya
Yeh I have the three mms settings and they are set as default, but it still wont go .. any more ideas guys?
Check the following, but change telstra to three:
Go to Start, Settings, Connections, then Connections again.
Go to the Advanced tab
Choose Select Network
Change the second drop down box to Telstra MMS
Make sure you soft reset after making these changes
If you are still stuck give the x1 support hotline a call. They have fixed a few problems for me.
Most operators have a service that sends you the mms settings through a text message. The phone can then automatically pick that up and config it.
Some operators don't support the X1 yet though.
Hi buzz, thanks for getting back to me again!
It doesnt give me that option in that box unfortunately .. I debranded my phone using the uk rom
I dont get how it will let me browse the internet using three internet settings yet not send an mms through them, and ive checked my mms settings so many times. Aggghhhrrr its driving me crazy!
Ooooh wheres the help line number? I think thats going to be my next option ..
Angelusz said:
Most operators have a service that sends you the mms settings through a text message. The phone can then automatically pick that up and config it.
Some operators don't support the X1 yet though.
Click to expand...
Click to collapse
Yes unfortunately three dont support this phone so will not send me the settings, but ive found the settings online aswell as checking through my previous phone so im 99% sure im doing it right
Ok, you need to make a new connection in that menu for the second drop down box.
The first drop down box should say Three Internet (or similar).
Click the "new" button below the second drop down box and use these settings:
3 MMS settings
Access Point Name: mms.three.co.uk
Username: blank
Password: blank
Gateway IP (proxy) address: 217.171.129.2
MMS Message (Relay) Server URL: http://mms.um.three.co.uk:10021/mmsc
Then go into your SMS/MMS inbox and check that 3 MMS is your default mms server.
Last of all... soft reset and you should be right.
Woohoo it worked it sent it!
My last phone wasnt half as technical as this so its taking me a while to learn the ins and outs, but im determined to perservere as I love it so much.
Buzz your an angel .. Thank you so much for your help
Mella
No worries.
Make sure you keep these settings somewhere (especially if you are flashing new roms).
It took me a while to get my mms settings working (no thanks to telstra), but I'm always happy to help.
Hi,
Im using Cyanogen's 3.4 ROM with Hero Theme 1.3.5 and can not for the life of me figure out how MMS is supposed to work simultaneously with data/internet.
I have 2 separate access points configured on the phone, one for the internet and one for MMS.
If i create an MMS whilst the internet APN has the green radio button next to it checked it will not send. However if i go into the APN settings in the phone and check the radio button next to MMS i can send and receive it with no problems but can no longer browse the internet over GPRS / 3G
there is no settings in messages to tell the application which APN to use and it appears that in its current state, the phone is not smart enough to swap over temporarily to the correct APN and then swap back, it has to manually be done.
Is anyone else having this problem or is there something i am missing to get the phone using both APN's at the same time?
Thanks in advance.
Try setting the apn type to "mms" for the MMS one. The checkbox will dissapear, sa that might mean you can no longer manually select it, since it will be selected automatically
Ok i tried that and your right, it did remove the check box. but it didn't fix the problem unfortunately. just for good measure i changed my internet APN to have the APN type and that didnt work. so i removed it, left the MMS APN with the APN type of MMS, powercycled and tried again, still didnt work
Got any other ideas? is anyone able to replicate it? Cheers
You could try to use "default" for the Internet apn type, along with "mms" for the mms one. Other than that.. try searching the internet for the settings.