for some reason the search is not working, i've installed mini cm and now flash tool doesn't detect but it did with stock.
this a bug or am i doing something wrong?
Related
if you are stuck in boot loop or having difficulty starting your phone, don't worry, there should be a way.
I have experienced this issue today after flashing wrong file causing my phone to stuck in boot loop. after searching in this forum and after spending over 3 hours, I finally managed to restore my phone and it is now working perfectly fine.
therefore, I thought of making a basic guide to try to resolve such issues. please note, this is a very basic guide to resolve problems with starting your phone, I am not professional but will try to share my experience and help anyone in need. this was done on X10i
lets start:
1- if you have a recent back up and have access to xrec, you can simply restore your phone
2- if you have access to xrec but don't have a backup, try to flash a new ROM
I tried the previous two steps but it kept saying can't mount SD, therfore try the following
3- if you don't have xrec access, use the flash tool
download from here http://www.multiupload.com/7H4JT35B6G
then flash generic 2.1 to your x10, I used this one http://www.mediafire.com/?sqv6274anzfzn2x
here is the guide on how to do it http://forum.xda-developers.com/showpost.php?p=10879528&postcount=3
I have had problem saying "install or re-install drivers", you just need to install the file in the drivers folder in the flash tool main folder and restart the flash tool program
4- after flashing this ROM, restart your phone and root it using the flash tool, after the root your phone will restart, then you need to ask for premession and click xrec to install xrec to your phone
5- before installing new ROM, please make sure that your baseband and karnel is compatible with it (because the ROM you flashed earlier has old karnel and you will be stuck again in the boot loop if you flashed 2.3.3 just like me, then you will need to start again and install new karnel before instaling 2.3.3 ROM or even restore 2.3.3 ROM)
(you can simply install the new ROM then restart in flash mode and flash the new karnel .71 or flash the karnel and restore your backup)
I know that my choices of flash tool version or generic 2.1 version might not be the best, but I used them and resolved my issue and hope it will resolve yours. for any question please do not hesitate to ask me.
credits to everyone who helped, I can't remember everyone because I read quite a lot so please forgive me
nice post my friend
In flash tool I'm getting an error:
ERROR - USB\VID_0FCE&PID_ADDE\5&2BFAB030&0&5
any idea what to do?
it sounds to me that u may need to install the semc flash drivers.. inside the flashtool u may find a folder named drivers, go inside of that folder and install ggsetup.. also do u have pc companion installed?
tripico said:
In flash tool I'm getting an error:
ERROR - USB\VID_0FCE&PID_ADDE\5&2BFAB030&0&5
any idea what to do?
Click to expand...
Click to collapse
can you post the log from the flash tool so I can see at which step exactly this massage came up
I am fairly novice when it comes to flashing so here's a pretty dumb question:
I have an X10a, can I use the X10i software that you've linked in your post or is it just going to brick my phone.
Hi,i'm really a noob and i'm here to request help.
I've read almost all the development thread,but I never tried to do something on my own phone. Now I want to simply root it,I have the stock rom with v10k firmware.
Should I use the prerooted v10k or the root+cwm+unlocked bootloader mod? I saw someone talking about installing cwm from the Rom Manager app (in order to install cm10)
I'm waiting for a more stable cm10,now i just want root. What should I do? Flash prerooted v10k,unlock bootloader and then install cwm from the app or just flash the all-in-one mod?
Thanks to anyone that can provide me with a idiotproof guide to this (by the way I use the phone mostly with wifi and 3g)
- Link to installation procedure of a prerooted V10K ROM.
- Link to installation procedure for Bootloader unlock and installation of CWM Recovery.
Try these procedures! It helped me a lot
Ok,I'll try to flash them separately.
Flashing the v10k prerooted rom will do it? No wifi fix like for the deodexed one?
Yes, it will! I did it and it did not asked me to fix anything. It works very well.
I have two questions:
1) If I install the official drivers with the LG Support Tool and then I connect the phone,Windows Update tries to search drivers. What I have to do? The first time i tried to flash,KDZ stopped responding right after i clicked "Lauch Software Update" and a (if i remember the name correctly) mod.cab file appeared on desktop.
2) I have to connect the phone with Media Sync (MTP) or with PC Software? I read two guides on How To Flash Stock Firmware on L7 and one says Software PC,one says USB Storage.
Thanks
It's completly normal to the KDZ stop responding. It force close when it ends.
And you have to connect with PC Software!
Yes,it worked
I was kinda worried to do this,thank you
I have installed official jb + unlocked bootloader and cwm and after i have installed miui rom by flatzki (or smth) it gives me this http://i.imgur.com/beyrYZY.jpg . So the phone boots,it shows the bootanimation and after that appears this and the phone shuts down. Please tell me how to fix this asap because i dont have a notebook or a pc.
Have you tried to reflash the JB? Or you had this problem after you unlocked the bootloader? Maybe you did something wrong.
This appear after i flashed the miui rom. Before when i was on official jb i had no problems.
Reply
I think if you flashed miui on jelly bean you must flash v10 baseband from xoxodemo http://forum.xda-developers.com/showthread.php?t=2275969 , because miui is for android 4.0.3.
Thats right mate. Right now i have downloaded another jb rom but my cwm doesnt recognize it. When i tap on external sd card it appears the miui zip but the jb zip not. How can i fix this?
i flashed this ROM
http://forum.xda-developers.com/zte-blade/general/rom-t2863932
but i dont really like it. (i dont have a problem with it, it just doesn't look like android, cant handle it, it isn't comfortable for me..)
so i tryed flashing STOCK rom via FP/SP flash tool (whatev it's name is) i tryed all versions that can be found on the website.
i cant load scatter file "ERROR: initializing scatter file failed. Please check the name of scatter file which you loaded is legal."
i repeat, i tryed all versions that can be found on the website, it wont work.
also, i did try flashing it via CWM, but error status 7 happened, (i fixed that , looked up at youtube)
then i tryed again but theres another problem, error status 6.
i also lookd on youtube to fix this but i CAN NOT do it.
please help me, i tryed everything i could...
if possible help me fix sp flash tools scatter file loading, that would be best way to flash ZTE BLADE Q MAXI stock rom
STOCK ROM can be downloaded from here :
http://download.ztedevices.com/UpLoadFiles/product/569/4045/soft/2013122509280184.zip
or here (download speed difference)
http://pc-drivers.de/zte-blade-q-maxiorange/download-653431.html (first on the list)
if any1 can find a fix, please post also your SP flasher AND edited ROM or whatev the fix is depending on.
Sry bro,.... i have everithing for stock (cwm nandroid backup,scatter for SP flash tool) but for Blade Q
Hello,
I have a LG Optimus L3 E400GO (Dutch) currently containing a version of Cyanoid along with CWM Custom Recovery.
As Cyanoid is working really, really, really slow, I would like to revert to my original rom and see if I can still use a few common apps on this device.
I am having trouble reverting. I have done my best to follow this guide: http://forum.xda-developers.com/showthread.php?t=1060121
The phone is recognized by Windows as a media device and is able to work with it, but LG PC Suite does not recognize the phone. KDZ updater keeps telling me "Phone not found" (here I have USB Debugging mode on). The drivers are installed and I have tried reinstalling them.
I am sure that I have the right stock firmware.
What am I doing wrong?
Thanks in advance.