Related
Regarding this page:
http://forum.xda-developers.com/showthread.php?t=991072
(Guide) Flash SBF to Motorola Atrix 4G
I was hoping to get some help.
I have an unrooted Atrix. It's my first Android phone. I already installed the latest update, 1.5.7, when it came out.
I'd like to roo the phone, but according to the above link I have to flash back to 1.2.6. I think I can handle the rooting process, but the flashing to the prior build is what I'm confused on how to do.
Am I understanding this correctly?:
1. I download the 1.2.6 file. Question: (What is the 1.5.2 file?)
2. Download the RSDLite 5 and install it.
3. I have a Windows Vista 32 bit system, so install the
32 bit file since I'm not rooted.
4. Then follow the instructions...turn off phone, ect..
5. On Step 7... Load up the SBF file, that would be the 1.2.6 file correct? I'm asking because I don't know what that 1.5.2 file mentioned earlier is. Does it matter where this file is extracted to on my computer?
After this is all done then do I I go to this page
[SCRIPT] GladRoot v4.2 (Bell 0.37.4, AT&T 1.26/1.52/1.57 Supported - Now w/ UnRoot) and do the first set of instructions?
Sorry for all the questions. I'm new to this and don't want to brick the phone. I really want that Titanium Backup program so I can backup and freeze some things.
Thank you
Don
I had the 1.5.7 update without root and a few days ago I did the same thing.
1. I download the 1.2.6 file. Question: (What is the 1.5.2 file?).
just get the 1.2.6 file
2. Download the RSDLite 5 and install it.
yes
3. I have a Windows Vista 32 bit system, so install the
32 bit file since I'm not rooted.
yes
4. Then follow the instructions...turn off phone, ect..
yes
5. On Step 7... Load up the SBF file, that would be the 1.2.6 file correct?
yes
I'm asking because I don't know what that 1.5.2 file mentioned earlier is. Does it matter where this file is extracted to on my computer?
no
After this is all done then do I I go to this page
[SCRIPT] GladRoot v4.2 (Bell 0.37.4, AT&T 1.26/1.52/1.57 Supported - Now w/ UnRoot) and do the first set of instructions?
if you have AT&T yes. Extract it so that it's C:\GladRootv4.2. When you run gladroot.bat be sure to answer yes to the question "Are you updating an AT&T Atrix on 1.26 to 1.57? [y/n]"
I got the adb "Unable to detect device" error whenever I ran the scripts. Just run the command adb services in a command prompt (You should see a device name as output) while in the C:\GladRootv4.2 directory for your computer to detect your phone properly and then run the script.
It's fairly painless, the SBF flash can take a while, 15-20 minutes or so. You will lose nearly everything that's on the phone, so save what you want to keep. I did notice the ringtones that I saved onto the phone (not on the sd card) were still there.
Root explorer is more interesting IMO.
Cheaper than TB.
Just need to rename apk bay adding a .bak to freeze them.
Thanks for the quick replies. These forums are great!!
One last question. Once rooted, if Motorola comes out with future updates, will this process need to be repeated for each update?
Thanks again.
Don
Shaydar said:
Root explorer is more interesting IMO.
Cheaper than TB.
Just need to rename apk bay adding a .bak to freeze them.
Click to expand...
Click to collapse
i'd rather pay for few bucks for TB to have a quick and easy "freeze"/"unfreeze" button than to keep going in and manually renaming apks.
plus you can do all the root exploring and file managing that you want for FREE with super manager (in market).
dwaded said:
Thanks for the quick replies. These forums are great!!
One last question. Once rooted, if Motorola comes out with future updates, will this process need to be repeated for each update?
Thanks again.
Don
Click to expand...
Click to collapse
Not sure, it depends how devs here on xda manage to root a future build. If the approach is the same as what is available now (preserve root in current build, update, restore root) you will not need to do the flash, lose everything etc. only if you run gladroot.bat prior to the official update. If you install the official update without running gladroot.bat then you'll have to go through the fun that is SBF flash.
I have a question about this as well, so I thought I'd ask here instead of a new thread...but at the drivers section of the instructions, it says just download them but if I've rooted my phone I should already have them. But if I've connected my phone to my computer by USB before just to transfer files, even if I haven't rooted, should I already have the right drivers?
thebeardedchild said:
I have a question about this as well, so I thought I'd ask here instead of a new thread...but at the drivers section of the instructions, it says just download them but if I've rooted my phone I should already have them. But if I've connected my phone to my computer by USB before just to transfer files, even if I haven't rooted, should I already have the right drivers?
Click to expand...
Click to collapse
Maybe. I would just install the specified drivers listed just to be safe. It's not a very large install file.
gnahc79 said:
Maybe. I would just install the specified drivers listed just to be safe. It's not a very large install file.
Click to expand...
Click to collapse
Alright, fair enough! Thanks for the help!
EDIT: Actually one more question. Does flashing the original SBF clear my phone? If it does, how can I backup everything on there if I'm currently unrooted? (I'm flashing this so that I CAN root later on). I'm not too worried about this I guess but I should be prepared anyway...
Hi Im Running My x10a 2.1 Bulid Number 2.1.A.0.435
I Need A Generic 1.6 Firmware for The x10a or AT&T's 1.6 Can anyone Help Me With Downgrading And Doing This And The Files I Need Thank You
re:
x10iNick said:
Hi Im Running My x10a 2.1 Bulid Number 2.1.A.0.435
I Need A Generic 1.6 Firmware for The x10a or AT&T's 1.6 Can anyone Help Me With Downgrading And Doing This And The Files I Need Thank You
Click to expand...
Click to collapse
I think you can find it here http://forum.xda-developers.com/showthread.php?t=872298 just flash using flashtool, i think it will work...
Search and you will find the answer, but I will help you out this time!
http://forum.xda-developers.com/showthread.php?t=872298
The problem when I had went back to 1.6 was that it would not install correctly via flashtool. I had to use the old non-gui flashtool to get back correctly. I think it's included in the above link. Otherwise you can probably go into J's CM7 thread and download the baseband 52 in his mirror/fileserve account. Just put the files into the firmware folder, replacing the baseband files and you should be good.
Restoring back to AT&T 1.6 Branded 1237-4604 Firmware with Root Explorer:
Your phone must be rooted. Make sure you run a backup first as this will wipe data. You need the app Root Explorer set to write permissions R/W (at top of the screen) then go into system/build.prop file and long press on build.prop file and open in text editor. Then change the SI number from 1234 - 4820 back to 1237-4604 in every place you find it. I think it appears 2 maybe 3 times. Then save and close. REBOOT! Then run repair software via SEUS or PC Companion. *If you have run SEUS or PC Companion since you updated to 2.1, you need delete the contents inside the folder "db" found inside the update service program wherever it is saved on your computer. **It will say that you have the latest software, but REPAIR ANYWAY! Reboot, setup, reinstall your Backup app from market, Restore. DONE!
*Root Explorer costs a couple $, but well worth it. If you have problems finding Root Explorer or do not have a paypal account, send me a PM. I will help you.
Would this be the same process on a Rogers phone? Or would the SI numbers be different?
Different numbers, but same process. There is a thread with all the SI and CDA numbers.
Hi, i have been looking through some of the rooting, flash threads on here and there is a bit too much information,lol.
Can anyone detail the basic steps, software required to roll my X10 back to the 1.6 OS?
I am still having connectivity issues when trying to use the handset in the car.
The vehicle manufactures website shows that the Xperia X10i is compatible with their factory fitted handsfree systems, but only on OS 1.6.
1. Download this and extract in any folder of your computer:megaupload.com/?d=HCWX4KO3 (The credits of this goes for its creators)
2. Open the folder that its named 1_firmware and in the fileDeviceID.txt copy yours, save and close. (This is the same as the one used on the flashtools of Bin4ry)
This is how you can get your DeviceID on Windows: (Again thanks tojimbo77)
2.1: Connect your phone to the computer on the USB port you are going to use to flash it.
2.2: Press start (or windows icon) and in the run box type regedit
2.3: Click edit>find, and type in Vid_0fce&Pid_adde. You should find "DeviceInstance". If that fails, make sure Match whole stringis un-ticked, and click find next or press f3, if that fails, tryUSB\VID_0FCE&PID_ADDE. Copy the last section of that, it should look something like "5&2888d0ff&0&1".
Note: It changes with every diffrent USB port you use....3. Download your Firmware, extract it and copy all the files on it to the 1_firmware folder. You don't have to erase anything from this folder, unless you got the message to replace a file.
4. Now run the RootX10a_v2.cmd and select step 1 and follow the instructions. If done correctly you will see a window that starts to write and write and write a lot of things. This process will take around 5 minutes, so be patient. (It is like if you were flashing your phone)
5. Turn your phone on and wait until you get the configuration screen.
6. Now connect the phone to the PC and run PC Companion or SEUS. If it shows that there is a new software for your phone, follow the instructions and update if you want.
7. Enjoy your phone on Android OS 1.6 or 2.1 with your operator
Thank you on anticipation to any help offered.
I have had a look here, but am not 100% if this is all that i need to do?
Sorry, not able to post the link, being a new user.
The one part that is not clear to me is where they say, "Open the folder that its named 1_firmware and in the fileDeviceID.txt copy yours, save and close"
What is it that im supposed to copy?
No.. no...
You need the flashtool and the 1.6 files..
I cant seem to find the 1.6 files...
Why do you need 1.6?
SE seem to have done something with the update 2.1 where the phones Bluetooth will connect to my vehicle, but only for about 40 seconds, then removes its self and then re attaches, then removes its self again and this goes on for the duration the handset is in the car with me.
The handset i have just now was a replacement for my original and came with the 2.1 OS already updated.
The original 1.6 OS that was on the phone connected to my vehicle and gave me phonebook access.
I have neither now hence why i wish to roll back to the software that is compatible with my vehicles system. 1.6 buildR1FA016 Kernel 2.6
Get your phone rooted, load Xrecovery.
and flash Wolfbreaks CM rom.
And watch the magic.
OmegaRED^ said:
Get your phone rooted, load Xrecovery.
and flash Wolfbreaks CM rom.
And watch the magic.
Click to expand...
Click to collapse
Thanks for the above, but can you break this into more simple instructions, links etc as this is way above me. I'm not totally useless, but i have never done anything like this, so it is all double dutch to me at this point in time,lol.
Download the flashtool from androxyde's thread then follow the instructions to flash the latest FW, then reboot your phone plug it in and press root on the flashtool and then reboot and install XRecovery and use it to install a custom ROM by following the directions in a ROM thread.
Just start by reading the Flashtool thread.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
CMoney87 said:
Download the flashtool from androxyde's thread then follow the instructions to flash the latest FW, then reboot your phone plug it in and press root on the flashtool and then reboot and install XRecovery and use it to install a custom ROM by following the directions in a ROM thread.
Just start by reading the Flashtool thread.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
Click to expand...
Click to collapse
Had a read at the flash tool thread and even more confused now, too much information and no understanding of what it all means.
I am looking for someone who can supply links to what i actually need to roll the phone back.
What software do i require.
Do i have to root the phone and if so, how do you do this?
I did say in the thread title an "Idiots Guide". Simple and straightforward instructions that a first timer can comprehend, similar to the text in my first post, bullet points?
Thanks.
Bonzo67 said:
I am looking for someone who can supply links to what i actually need to roll the phone back.
What software do i require.
Do i have to root the phone and if so, how do you do this?
I did say in the thread title an "Idiots Guide". Simple and straightforward instructions that a first timer can comprehend, similar to the text in my first post, bullet points?
Thanks.
Click to expand...
Click to collapse
Dude.. all the threads have the answers.
Read abit it won't kill you.
OmegaRED^ said:
Dude.. all the threads have the answers.
Read abit it won't kill you.
Click to expand...
Click to collapse
I did and it's version this and version that. So which version is it that i actually need without screwing up my phone?
Suppose i'm more looking for something along the lines of what you would get if you downloaded a torrent file, where everything is in the one folder, inc the instructions.
Anyway, hopefully problem is sorted, as i am ditching SE after 10 years of using their handsets and going to Samsung which is compatible with my vehicles factory fitted system.
Bonzo67 said:
I did and it's version this and version that. So which version is it that i actually need without screwing up my phone?
Suppose i'm more looking for something along the lines of what you would get if you downloaded a torrent file, where everything is in the one folder, inc the instructions.
Anyway, hopefully problem is sorted, as i am ditching SE after 10 years of using their handsets and going to Samsung which is compatible with my vehicles factory fitted system.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1060703
Dear developers,
I have deleted (by mistake) program Launcer from my Smartphone and now it is not going to load. When I turn on it, there is only symbol of IDEOS. After a minute symbol starting to twinkle, but system not loading.
Could you please tell me how can I return to original firmware?
I hope someone will be able to support me.
If the launcher is the problem, you can just install another, or push again the original from a rom via adb. I assume that the device is rooted(I think you cannot delete a system app if isn´t). If you can connect to pc, then possibly you can install a launcher from huawei' s suite(I´m not sure because I don' t use windows and I haven't try this app) or from a android file manager like QtADB, Android commander or Droid Explorer. You can also install it only with adb via windows command prompt:
http://www.brighthub.com/mobile/google-android/articles/37151.aspx
And maybe, if wifi is enabled and connected, you can just install a launcher from market via pc' s web browser:
https://market.android.com/
The Modaco wiki has a list of original firmwares, but no link to Huawei works anymore. However, it is possible to download the latest China Unicom firmware - which does contain english language support. That should at least get you started.
As a new user I can't post links yet, but it is easy to find if you look for u8800 software, and then switch to Chinese.
Put the extracted directory (dload) on an sd card, in the top/root, put it in the phone and then hold volume down and power on.
Note, this will blow everything away to start from scratch so make sure it is what you want. In addition everything will be in Chinese so you need to be able to navigate to the settings to set it to English.
Better ideas? I am a noob myself so no guarantees...
I have unrooted it before to delete some trial games. And deleted Launcher by mistake.
I can't connect via usb now.
I'm afraid if I upgrade firmware, I have less memory because old one will not be deleted. Or maybe I'm wrong?
No, you're not gonna have less memory.
Did you tried to wipe to factory defaults from recovery mode(power button and vol+)?
You will not have less space because an original firware will format everything from boot partition, system and data... Basically , it will give you original software and status like it came from factory ... Like the other user said, jut find it, extract it , put the dload directory to the root of you sd card and hold volume down and start up the phone ... You will see a progress bar and when it is finished , the phone will restart itself, you will have to wait longer due to the creation of new files and there you go
vladislavnm said:
I have unrooted it before to delete some trial games. And deleted Launcher by mistake.
I can't connect via usb now.
I'm afraid if I upgrade firmware, I have less memory because old one will not be deleted. Or maybe I'm wrong?
Click to expand...
Click to collapse
Install recovery first, then you can connect your device to PC using recovery. If you have friend that have X5, copy the launcher. Else, just install Custom ROM.
The old one will be removed if you install custom ROM. If I'm not wrong.
Recovery.
Unplug USB, turn off your phone, press and hold vol + and -, then press power. Hold those three buttons until it turned on and the screen is purple-pink.
Backup all image data(copy). The rest is in the link.
Sorry for my English. Hope you understand what I write..
dancer_69 said:
No, you're not gonna have less memory.
Did you tried to wipe to factory defaults from recovery mode(power button and vol+)?
Click to expand...
Click to collapse
You are magician. it works now.
hmmm... but there is no launcher application - no workspace available. it doesn't want to load as before. strange.
upgrade don't work too. It is cycle repeating of step1/2.
I just tested and found that you can copy the missing apk from bootloader mode. In this mode(power + vol- + vol+ buttons), when connected to pc via usb cable all partitions of device mounted(at least this happens on linux). So, you can navigate to system partition on /system/app folder and copy there the missing launcher' s apk file. You can find this file on a custom' s rom(or on an official' s rooted rom like modaco's roms) update.zip file. It's on system/app folder. I tested this on linux and I could(not as normal but as root user though) copy or delete files from there.
dancer_69, thank you for your support. At my side when I connect via bootmode, there is only flashdrive is visible.
It's really strange that it is not going to upgrade.
I'm able to apply sdcard:update.zip. So maybe if to put this application inside of the card, it could install. but I don't know how to do it.
I finded apk file and tried to install it but it don't receive file because it hasn't some certificate. ???
I think you have 3 options here.
1. flash an official rom(you put the dload folder of rom's zip file on root of sdcard and boot to bootloader mode. The update starts automatic)
2. Use a linux system(maybe a livecd) to access the other partitions.
3. Try to reroot the device from pc, via superoneclick app(you can find it here), so to have access to system again.
but I haven't access to installation program area. nothing!
I have only ability by pressing (vol + and on) to choose install update.zip from flash card.
so.
1. when I runned new firmware from dload it didn't install. it was cycling at first level (1/2)
2. linux is good idea. but I'm not sure that it's will be profitable. maybe I have turned off access to partitions inside of phone
3. I can't install superoneclick as I'm not able to install any application.
I hope we are closer to some geniously idea. I have bought phone yesterday and we haven't service center in our city. So, I need to buy the other one.
This is not so serious problem, it' s not hardware, it´ software related. And I think you cannot turn off access so easy.
The superoneclick is a pc application. You don't need to install something on device(if I remember well, because I use it once before a long time). You can try it.
And you can try linux too.
I don't think that this is a problem that only service can solve it.
What firmware you tried? Try another one. And better try to find the one that you device has(if you know it)
Thank you for positive opinion.
1. Will try to change firmware as you said. Try 2 more firmware from Huawei.
2. Superoneclick needs approval from phone, today night I wasn't able to run it.
3. I'll try Linux too.
dancer_69 said:
This is not so serious problem, it' s not hardware, it´ software related. And I think you cannot turn off access so easy.
The superoneclick is a pc application. You don't need to install something on device(if I remember well, because I use it once before a long time). You can try it.
And you can try linux too.
I don't think that this is a problem that only service can solve it.
What firmware you tried? Try another one. And better try to find the one that you device has(if you know it)
Click to expand...
Click to collapse
Thank you very much for your excellent support. It's work now after trying of other firmware. Everything is excellent now.
I only noticed that battery is no very capacitive.
Please, send me your paypal account, I want to donate you a little.
I just managed to root my SCH i400 (first ever rooting of any Android device for me).
I am very surprised by how smoothly it went, despite reports & warnings everywhere about complications (like this one - which should be totally ignored if you're using SuperOneClick v2.1.1 or higher).
For the benefit of n00bs like me who may be confused by multiple sources, resources, versions and problem reports, I am posting a step by step procedure that is confirmed (by me, on Windows XP SP3) to be working smoothly, without a single hitch of complications:
Phone: Make sure setting > applications > unknown sources is checked.
Phone: Make sure phone is in debugging mode.
Phone: Make sure SD card is unmounted!
PC: Make sure Windows USB driver for this phone installed and works
PC: Make sure .NET 3.51 SP1 is installed.
PC: Unzip SuperOneClickv2.1.1-ShortFuse.zip ==> C:\Program Files\SuperOneClickv2.1.1-ShortFuse
PC: Double-click SuperOneClick.exe
PC (in SuperOneClick): Make sure you're on the Universal tab (the only other tab is Samsung Captivate, which isn't the i400).
PC (in SuperOneClick): Now click the root button and wait for the process to complete.
PC (in SuperOneClick): "BusyBox not found. Would you like to install it?" Yes!
PC (in SuperOneClick): "Root install has completed! Would you like to run a test?" Yes!
PC (in SuperOneClick): "Your device has been rooted! Would you like to donate now?"
Exit SuperOneClick, unplug phone from USB, power down phone, power on phone. -- this step might not be mandatory, I just did it to be on the safe side.
Enjoy!
Great job on this tut.
Sent from my SCH-I400 using xda premium
Nice...
I may have to sneak my wife away from her for a bit....
Sent from my DROID using XDA App
Froyo is so nice... Here's how...
Hey guys... new poster here.
Just got a (Gently used) Samsung Continuum for free from Verizon after the power button on my G Droid 1 broke.
Anyways, after rcving it and realizing that it would only support Android 2.1 - I was slightly upset.
My D1 was rooted and modded to the max many times over with just about every ROM you can get.
So after reading up about IMNUTS leaking the Froyo download for the Continuum, my hopes were raised.
It is now debinged, debloated, lightening quick and amazing!
There may not be ROMS out there yet - but I truly hope some of you geniuses decide to make a few.
Just wanted to say thanks and encourage you to do some research before rooting it.
Here's what worked for me.
Odin 1.3
Continuum PIT.pit file
froyo_modem.tar.md5
cwm_recovery_test4_adryn.tar
cyan Clockwork Mod Recovery (BLUE, not yellow) (update.zip file, which is placed on the root of your SD card - renamed to update.zip)
stock_deodexed_ec03.zip (ROM)
(Place all of these files on your Desktop for easy access)
How to do it...
1. Connect your phone to your computer and Mount it.
2. Place the cyan CWM Recovery zip file to your SD card. (rename it to update.zip & do not put it in any folders. Just drag the file to your SD card - whatever drive it is listed as. Mine is my Removeable F
3. Make a new folder on your SD card. Name it whatever you want. (Mine is named "Froyo") Place the stock_deodexed_ec03.zip file in the folder on your SD card.
4. Open Odin 1.3 on your PC.
5. While your phone is off... hold the down volume button and connect it to your computer via USB. The yellow triangle will appear and it will say "Downloading". (Some people say to take the battery out, but my Odin program would not recognize my phone without the battery. Whichever works for you is fine.)
6. In Odin - Click the PIT file button. Load the Continuum.Pit.pit file into the file field. (Just double click it once you find the file from your Desktop.)
7. In Odin - Click the PDA button. Load the froyo_modem.tar.md5 file into the file field. (same as #6. Just double click it once you find the file from your Desktop.)
8. Click Start in Odin.
It should think for a minute, then say resetting, then say PASS
Then your phone will probably turn back on - turn it off again and reconnect it to your PC in download mode as stated in #5 above.
9. In Odin - Click the PDA button again. Load the cwm_recovery_test4_adryn.tar file as you did in #'s 6 and 7 above.
10. Click Start again in Odin... same as before. (thinking, resetting and PASS)
Your phone will turn on again.
11. Disconnect your phone from the computer & turn it off.
12. Hold both Volume buttons and turn it on. It will boot into the Samsung Recovery mode.
13. Use your Volume buttons to go down to highlight "apply update.zip" Then find the place where your normal Menu softkey would be and push it. The phone should then reboot into Clockwork Mod Recovery. It will be orangish.
14. In CWM, use the Volume buttons to highlight Backup/ Restore. Use the Power Button to choose it. Then at the next field, highlight Backup and make a backup.
15. After is makes the backup, press where the softkey Back button should be to go back to the original screen. From there, do a Wipe Data/ Factory reset. Do not forget to do this part.
16. Once it does the Data Wipe - go back to the main menu and and highlight & select the "zip from SD card" choice. Find your "Froyo" folder (of whatever you named it) and apply the stock_deodexed_ec03.zip file.
17. After that, go back to the main menu again and reboot your phone.
It may take a while, but your phone should restart in Froyo.
Of course, you have to re-sign in to your Google network...
Thanks so much guys for all the posts. Without them, is nowhere near as cool.
Hanging at Step #5, Now what?
Thank you for sharing. Wish I could say it went as smoothly for me with my SCH-I400 Continuum... I'm still working on it! I followed recommendations of several different developers/rooters. I've installed .Net Framework 4.0 and the SDK developers kit (who knows, maybe I'll start a new hobby...), and now when I run Superoneclick it hangs at step #5 with this message:
link_image[1728]: 3252 could not load needed library 'libdiskconfig.so' for './zergRush' (load_library[1058]: Library 'libdiskconfig.so' not found)CANNOT LINK EXECUTABLE
I have rebooted the computer and the phone, unmounted the SD card, settings to allow unknown sources, and turned on USB debugging. I'm not sure why the config file can't be found, and I don't know where to get it...
Do I need to reinstall the SDK? Or install the additional Java developers software? Or am I over-complicating this whole thing?
Any ideas will be greatly appreciated...
-James
Perhaps the easiest way is to flash a rooted ROM through Odin (or Heimdall)... Especially if you don't use Windows. This is how I did it:
http://forum.xda-developers.com/showthread.php?t=1203597
Two topics in one thread?
Hmmm... seems we have 2 things happening hear. 1: Rooting a Samsung Continuum, and 2: Flashing a ROM...
My concern is the "hang" at step five for Rooting my Continuum SCH-I400... Cant use a ROM until the dang thing is rooted, and can't seem to figure out the hang.
Tried Z4 root from the phone rather than through the PC and it hung indefinitely... Maybe there's a related issue, and I don't care if it's Superoneclick or Z4 that gets the job done.
Has anyone gotten past the same issue?
-James
bighigmt said:
Hmmm... seems we have 2 things happening hear. 1: Rooting a Samsung Continuum, and 2: Flashing a ROM...
My concern is the "hang" at step five for Rooting my Continuum SCH-I400... Cant use a ROM until the dang thing is rooted, and can't seem to figure out the hang.
Tried Z4 root from the phone rather than through the PC and it hung indefinitely... Maybe there's a related issue, and I don't care if it's Superoneclick or Z4 that gets the job done.
Has anyone gotten past the same issue?
-James
Click to expand...
Click to collapse
That's where you are over complicating. You don't actually have to root BEFORE you flash a new rom, if the rom is 'prerooted'. I've never rooted this thing via s1c or z4. I simply flashed the kernels via odin and flashed the rom in cwm.
Either let me fly or give me death. Let my soul rest, or take my breath. - DMX
Txwolf1980 said:
That's where you are over complicating. You don't actually have to root BEFORE you flash a new rom, if the rom is 'prerooted'. I've never rooted this thing via s1c or z4. I simply flashed the kernels via odin and flashed the rom in cwm.
Either let me fly or give me death. Let my soul rest, or take my breath. - DMX
Click to expand...
Click to collapse
That's fine Txwolf, but still doesn't address the issue... Or the original reason for this thread - Rooting - which is is essential for the programs I am going to run, and that is what I have been asking about...
bighigmt said:
That's fine Txwolf, but still doesn't address the issue... Or the original reason for this thread - Rooting - which is is essential for the programs I am going to run, and that is what I have been asking about...
Click to expand...
Click to collapse
The issue seems to be that you just have to use that little search box a little better via xda or your web browser and find more information the root program your trying to use.
When you give up on that you can take txwolf1980 's advice
PS hang on step 5 in OP? Or in 3rd post? That would be getting into dl mode lol
Sent from my SCH-I400 using xda premium
Come on now...
ciscogee said:
The issue seems to be that you just have to use that little search box a little better via xda or your web browser and find more information the root program your trying to use.
When you give up on that you can take txwolf1980 's advice
PS hang on step 5 in OP? Or in 3rd post? That would be getting into dl mode lol
Sent from my SCH-I400 using xda premium
Click to expand...
Click to collapse
I spent 6 hours last night troubleshooting, researching, digging deep, and "using that little search box." Seems to me You guys need to "just read the thread." It's about rooting your phone, period. If a forum is out there, I've probably read it. I'm using superoneclick to do it. SDK is installed. Net framework is installed. My error message frome SOC is above. When I am finally rooted, THEN I will install several programs - starting with a wifi tether.
I see you have the same phone as I do. Is it rooted with a one-click method? I also tried Z4root and didn't like it.
bighigmt said:
...Seems to me You guys need to "just read the thread."...
I see you have the same phone as I do. Is it rooted with a one-click method? I also tried Z4root and didn't like it.
Click to expand...
Click to collapse
well i did read the thread...
ive been out of town for a week and finally back on my pc... i would love to help you yet more info is needed.
you are running dl17 stock 2.1 correct?
what OS is your pc running?
and yes i have same phone as you. i have used superone click on ec03 build once.
just for root. but then flashed a deodexed rom to use custom mods and apps.
and since have been flashing rooted kernels, imnuts and adrynalynne have released most all of them.
there are a few ways to root the device, best bet is, as always is go to IRC.
clarity and patience are key, we all got to practice both
I rooted EC09 with soc no problem. If I send someone the EC09 could they extract the apks and send them to me? I deleted some sys apps for the ticker and rss feeds and need them back now to use it.
Sent from my SCH-I400 using xda premium
Unzip factory.rfs of ec09 to grab missing apks and put them on sdcard and install from there.
Sent from my SPH-M580BST using Tapatalk 2
verizonless said:
[*]PC (in SuperOneClick): Make sure you're on the Universal tab (the only other tab is Samsung Captivate, which isn't the i400).
Click to expand...
Click to collapse
FYI, my Windows Defender threat scanner just reported this SuperOneClickv2.1.1-ShortFuse.zip file as Exploit:AndroidOS/CVE-2011-1823, more specifically pointing at a file named Exploits/GingerBreak in that ZIP file.
I am going to delete this ZIP file as I no longer need it, but I got curious: Any idea what this means?
verizonless said:
FYI, my Windows Defender threat scanner just reported this SuperOneClickv2.1.1-ShortFuse.zip file as Exploit:AndroidOS/CVE-2011-1823, more specifically pointing at a file named Exploits/GingerBreak in that ZIP file.
I am going to delete this ZIP file as I no longer need it, but I got curious: Any idea what this means?
Click to expand...
Click to collapse
It means it'll root your phone. Some applications could try to do this without permission and do shady things with your phone. Nothing to worry about if your doing it on purpose.
trailblazer101 said:
It means it'll root your phone. Some applications could try to do this without permission and do shady things with your phone. Nothing to worry about if your doing it on purpose.
Click to expand...
Click to collapse
Im assuming by now everyone is on EG04 Gingerbread?