I notice a guy with a rooted Play now has a brick after running an OTA.
There was an OTA available, which I did, before I rooted.
If I had rooted 1st, then initialized the OTA, would this have bricked my device?
Is this something that we should be aware of and should we be disabling auto search for OTA's as a precaution?
Mine bricked before i rooted. but after i unlocked the bootloader.
Offtopic: I think the term brick gets thrown around too much, it's still possible to recover from these kinds of errors, the phone still attempts to boot and you can get to the recovery or bootloader, so "semi-brick" might be more appropriate.
I've had actual "bricks" in the past, like no power, no led, no charge, no way to recover unless you jtag/serial connection the phone... those aren't fun expecially when you know it's you are the one that did it
don't mean to derail thread...
If gingerbreak was used couldn't one just unroot, then update and root again afterwards?
Would this be a safe way to go around it, if OTA 'semi-bricks' a rooted play?
Regards Dousan...
It's very hard to _really_ brick an xperia device
Unlocking, rooting, flashing custom firmware.. none of these messes with your bootloader.
Rule of thumb: If you get the USB flash device on your computer when connecting a USB cable to the device and holding the back key you can ALWAYS recover it. Your best bet would be using Flashtool by Bin4ry and finding a suitable ftf-file for your phone.
hi
my phone are bricked an detected with my pc in semc flash with green led but i flash it with flashtool flashing ok but no boot i test with 3 differents .tft but same problem flash ok no boot
just green led and quick vibrate
thank you
Id like to root my phone but with so many updates possible atm, im holding off... ive seen that post about some guy with the brick/semi brick phone from an ota update and i can do without that hassle.. my phones fast enough and has enough space for now but i will mod it when theres good reason too... if i was u i would turn off auto update just incase and check the forums for others advice when needed.
Related
Hi Peeps.
I now have an unlocked boot loader and would like to know what other users that have an unlocked boot loader are doing or have done.
I'm not sure where to start, to many decisions.
P.S can I now install recovery on the sd card like i did on my x10?
Just check out the development section everything you will need is in there, doomlord has a kernel that has OC, recovery and some other goodies
Sent from my R800i using XDA App
ok i checked for software updates (ota) and the new update showed.
i selected to install and after it tried to reboot, the phone does nothing.
no fastboot, not starting. the only life i get is plugging it into my computer and holding the back button gets me the green light. holding the search button does nothing.
I tried to update with my computer and it just says you have the latest version, no option to reinstall.
any ideas on what to try?
Refer to this thread to get your phone working again:
http://forum.xda-developers.com/showthread.php?t=1126358
Now that you've unlocked your bootloader, you can't get updates OTA. So don't do that and brick your phone again! Also, depending on how you've unlocked it, you may or may not be able to update using PC Companion/SEUS.
General rule of thumb
Unlocked bootloader=stay away from official means of update.
If you want official updates, use flashtool. Or relock your bootloader temporarily for seus/pc companion.
Sent from my R800i using XDA App
Hello everyone, Im new here so please dont kill me if this is a common question. I have searched all over but cant find the answer I need. Im excited to learn from all the wonderful information here and cant wait to get started.
Anyway, I had a Nexus S 4g flashed to work on Boost. I would like to root it so that I can change some things. However, I do not know if my phone was previously rooted. Is there anyway to find out? If it was, and I rooted it again, would that cause problems? Also, does rooting the phone cause problems with the flashing, or will it keep all of the necessary network information intact (so that it doesnt screw up my service)?
Rooting doesn't cause problems with the flashing, it just -potentially- opens up the system to damage. This is a user responsibility and not a fault of the rooting process; it's a possibility of having too much power over the system.
Most likely it would have had the bootloader unlocked and have been rooted. Turn off the phone and turn it on again by holding Vol. Up and Power simultaneously for a few seconds. If it was rooted, the best way to know is if it says "bootloader unlocked" in the upper half of the screen. If not, there is a high chance it isn't CURRENTLY rooted. If it is unlocked, the most work you need to give root access to android is going into recovery and installing a .zip file.
Exactly so after finding that out just look over one of the many guides we have here at XDA to flash the superuser package.
Sent from my Nexus S
I didnt see anything saying unlocked. I see 'Lock State - Locked', so Im assuming this means that it is not currently rooted. I guess now I will go through some guides and learn which method would be best for me. Thanks for the quick reply and help.
Most likely you aren't rooted either - you can test by typing "su" in terminal emulator.
Just remember if u unlock bootloader the internal data and sdcard will all be deleted.
Here is the Droid Razr HD software update. I have not tested it as I use CM 10.1 and have no interest in going back to stock. I found it on www.droidrzr.com in a forum post then shared it on my dropbox account.
I posted it on my Dropbox account so not sure how long it will last until the link is gone:
https://www.dropbox.com/s/d2x9vutel4vnqmm/Blur_Version.9.16.6.XT926.Verizon.en.US.zip
It does "fix" the bootloader unlock exploit though
http://www.droid-life.com/2013/07/1...the-kernel-exploit-for-unlocking-bootloaders/
scoobaspeaz said:
Here is the Droid Razr HD software update. I have not tested it as I use CM 10.1 and have no interest in going back to stock. I found it on www.droidrzr.com in a forum post then shared it on my dropbox account.
I posted it on my Dropbox account so not sure how long it will last until the link is gone:
https://www.dropbox.com/s/d2x9vutel4vnqmm/Blur_Version.9.16.6.XT926.Verizon.en.US.zip
Click to expand...
Click to collapse
So, stock recovery to install this?
I would assume you would need to be 100% stock, including the recovery, to install this.
scoobaspeaz said:
I would assume you would need to be 100% stock, including the recovery, to install this.
Click to expand...
Click to collapse
hmm put it on my internal storage and its not found, I think stock recovery wants to see it on a sdcard.
If your boot loader is unlocked before the update, it should stay unlocked. You just will not be able to unlock with methods out there now.
Sent from my Razr HD using xda app-developers app
I received the OTA today on my Max HD. It was build 9.18.79.
Sent using xda premium
A few questions I haven't been able to find answers to (many threads have been started on this new update topic and I haven't found the answers I'm looking for yet):
1) I've heard that there are two versions of this update, 9.20.xx and 9.18.xx... Anyone know the differences yet? Is one version for phones that have been unlocked and the other for phones that are still locked? Is one version for XT925 and the other for XT926? I received the 9.18 version, I am rooted, unlocked, and have a XT926 phone.
2) Anyone with an already unlocked bootloader try and take the update? Do you remember which version of the update you took? Did it install correctly? Are you still unlocked?
3) Anyone that is rooted and unlocked try to take the update? Did it install correctly? Are you still rooted and unlocked after the update? Did you have to protect the root with either SuperSU or Voodoo OTA Root Keeper? If so, do you mind posting step-by-step instructions for protecting the root so the phone is still rooted after the update?
Thanks to all who can shed light on these questions!
LifeAsADroid said:
A few questions I haven't been able to find answers to (many threads have been started on this new update topic and I haven't found the answers I'm looking for yet):
1) I've heard that there are two versions of this update, 9.20.xx and 9.18.xx... Anyone know the differences yet? Is one version for phones that have been unlocked and the other for phones that are still locked? Is one version for XT925 and the other for XT926? I received the 9.18 version, I am rooted, unlocked, and have a XT926 phone.
2) Anyone with an already unlocked bootloader try and take the update? Do you remember which version of the update you took? Did it install correctly? Are you still unlocked?
3) Anyone that is rooted and unlocked try to take the update? Did it install correctly? Are you still rooted and unlocked after the update? Did you have to protect the root with either SuperSU or Voodoo OTA Root Keeper? If so, do you mind posting step-by-step instructions for protecting the root so the phone is still rooted after the update?
Thanks to all who can shed light on these questions!
Click to expand...
Click to collapse
There are 2 different versions, depends on what System version you have of 4.1.2 on the XT926 only. The 9.18.79 version would indicate that your Systems version is 9.16.6 if this is not correct DO NOT FLASH. I am Rooted/Unlocked, if you take the plunge you must OTA Rootkeeper/SuperSU backup SU, as the update breaks Root> IF there is no backup of SU with the latest binaries. If you lose Root, there are a couple of ways to Downgrade. A common problem for those of us Root/Unlocked the Update FAILs at the end. Most of the Update goes through, however the new Radio does not go through, as of right now if you Update and your Baseband is VANQUISH_BP_100730.081.64.09P then you have the OLD radio, the new Radio is VANQUISH_BP_100730.160.64.15P.
Between the 2 OTA's these should match-up as either 9.16.6 = 9.18.79 or 9.16.9 = 9.20.1
Thanks for the reply! A few more questions if you don't mind (would hate to do something wrong... like I did last time... luckily I was able to revert back to an original version and fix the install... sigh...):
4) With protecting root, I need the SuperSU Pro version, yes? To be able to use the survival mode, yes? Will Voodoo OTA Rootkeeper do the same thing? Is it possible to use both "to be sure"?
5) I have everything backed up with Titanium Backup. Should I bother getting the pro version and backing everything up using the cloud backup and hypershell? Or won't this matter since if root doesn't keep I won't be able to use Titanium Backup?
6) I also have performed the VZW Wireless Hotspot hack using SQLite. Am I going to have to undo the hack in order for the OTA update to work?
Thanks again for all your help!
Update - I decided to attempt the update and hope for the best. System update 9.18.79.xx updating from 9.16.6.xx.
I purchased the SuperSU Pro from the Play Store, and used the survival mode in SuperSU. I also used the Voodoo OTA Rootkeeper and protected root. I figured if one didn't work the other might... Voodoo worked to protect and re-install root access (not sure about SuperSU as I tried Voodoo first to restore root after the install).
I am unsure if the bootloader is still unlocked, but from what people have said there doesn't seem to be a reason to believe it is re-locked. I haven't tested it out to know for sure though.
It appears that the entire update installed correctly. No errors, and the baseband version was updated to the new radio (xxx.15P).
I did not undo the VZW Wireless Hotspot hack prior to installing the update.
Hopefully this post helps others out there.
My final question... what does updating the radio/baseband do exactly?
i need help! i tried installing the update but i forgot i had TWRP.. so the update did not got installed, i rebooted the phone, but the OS tried to install the update again and inmediatly reboot the phone in recovery again .. then from recovery i flashed liquid smooth rom but i got stuck in the boot animation... my big issue is that my power button is broken! now i cant reset the phone to enter in fastboot mode.. i cant do anything... now my battery is totally drained and i cant turn on the phone (my power button does not work).. i can plug the usb cable and the led turns green. but i dont see any more options
rodmc123 said:
i need help! i tried installing the update but i forgot i had TWRP.. so the update did not got installed, i rebooted the phone, but the OS tried to install the update again and inmediatly reboot the phone in recovery again .. then from recovery i flashed liquid smooth rom but i got stuck in the boot animation... my big issue is that my power button is broken! now i cant reset the phone to enter in fastboot mode.. i cant do anything... now my battery is totally drained and i cant turn on the phone (my power button does not work).. i can plug the usb cable and the led turns green. but i dont see any more options
Click to expand...
Click to collapse
My suggestion, let your phone charge a bit.
Once charged up, turn it on and get it into Fastboot. From there you can use the DROID RAZR HD UTILITY 1.21 (http://forum.xda-developers.com/showthread.php?t=2307439). In that utility option 1 will bring you back to complete stock ROM, option 2 will bring you back to a stock recovery. This will completely erase your phone.
This should at least give you a fresh functioning phone. If you want to try to keep your data or personal files, I'm not sure what you could load via fastboot to get yourself a functioning phone again (maybe just a kernel?).
As a side note, I used TWRP to load the update and my phone updated except the radios it seems. It sounds like the same thing happens with the stock recovery.
Lenny
KachowPow said:
There are 2 different versions, depends on what System version you have of 4.1.2 on the XT926 only. The 9.18.79 version would indicate that your Systems version is 9.16.6 if this is not correct DO NOT FLASH. I am Rooted/Unlocked, if you take the plunge you must OTA Rootkeeper/SuperSU backup SU, as the update breaks Root> IF there is no backup of SU with the latest binaries. If you lose Root, there are a couple of ways to Downgrade. A common problem for those of us Root/Unlocked the Update FAILs at the end. Most of the Update goes through, however the new Radio does not go through, as of right now if you Update and your Baseband is VANQUISH_BP_100730.081.64.09P then you have the OLD radio, the new Radio is VANQUISH_BP_100730.160.64.15P.
Between the 2 OTA's these should match-up as either 9.16.6 = 9.18.79 or 9.16.9 = 9.20.1
Click to expand...
Click to collapse
So any idea how one might fix this?
LifeAsADroid said:
A few questions I haven't been able to find answers to (many threads have been started on this new update topic and I haven't found the answers I'm looking for yet):
1) I've heard that there are two versions of this update, 9.20.xx and 9.18.xx... Anyone know the differences yet? Is one version for phones that have been unlocked and the other for phones that are still locked? Is one version for XT925 and the other for XT926? I received the 9.18 version, I am rooted, unlocked, and have a XT926 phone.
2) Anyone with an already unlocked bootloader try and take the update? Do you remember which version of the update you took? Did it install correctly? Are you still unlocked?
3) Anyone that is rooted and unlocked try to take the update? Did it install correctly? Are you still rooted and unlocked after the update? Did you have to protect the root with either SuperSU or Voodoo OTA Root Keeper? If so, do you mind posting step-by-step instructions for protecting the root so the phone is still rooted after the update?
Thanks to all who can shed light on these questions!
Click to expand...
Click to collapse
I tried to take the 9.18.79 update I protected the root (I'm not unlocked) before I did so I also temporarily un-rooted (I've always been told to do this before and update) Now I an no longer rooted and it can't find any SU binary codes. Gonna have to flash back to 9.6.16 and try it again I guess or stay on 9.6.16 in order to maintain root for now. If you find a solution please share.
IDroidThere4Iam said:
My suggestion, let your phone charge a bit.
Once charged up, turn it on and get it into Fastboot. From there you can use the DROID RAZR HD UTILITY 1.21 (http://forum.xda-developers.com/showthread.php?t=2307439). In that utility option 1 will bring you back to complete stock ROM, option 2 will bring you back to a stock recovery. This will completely erase your phone.
This should at least give you a fresh functioning phone. If you want to try to keep your data or personal files, I'm not sure what you could load via fastboot to get yourself a functioning phone again (maybe just a kernel?).
As a side note, I used TWRP to load the update and my phone updated except the radios it seems. It sounds like the same thing happens with the stock recovery.
Lenny
Click to expand...
Click to collapse
I agree with Lenny. This same thing happened to me when I tried to take the liquid smooth ROM. Follow his instructions above. You'll lose all your pics, vids, files, etc. But at least you'll have a working phone again.
Went smoothly here
All my devices except this one are rooted and some are rom'd. I thought long and hard about whether to void this warranty but decided one day it would be out of updates from VZW and I would want to flash something. I have been denying the OTA for the last day so I figured now or never.
Here are the simple steps:
Download and install Moto device manager (for the USB drivers) here
Enable USB debugging in developer options on the phone
run motochopper here
run motoapocolypse here
install voodooOTA root keeper from Play and backup root
apply OTA
It went error free. The phone has the 15P radio update, unlocked BL and root.
larsdennert said:
It went error free. The phone has the 15P radio update, unlocked BL and root.
Click to expand...
Click to collapse
I want to confirm something, you unlocked the bootloader and then took the OTA and the bootloader remain unlocked (and stayed rooted due to root keeper)?
So the benefit to all this would be to get the new radio update?
bananapeapod said:
I want to confirm something, you unlocked the bootloader and then took the OTA and the bootloader remain unlocked (and stayed rooted due to root keeper)?
So the benefit to all this would be to get the new radio update?
Click to expand...
Click to collapse
Yes, the bootloader won't get locked again after it is unlocked. Moto would be shooting themselves having to reinstate warranties if they did that. Yes I wanted the option of flashing later becuase the ota will install sooner or later. I also want to stay on the upgrade path for now to have current radios.
I still have an Eris lying around that is long out of support but i have gb on it.
IDroidThere4Iam said:
My suggestion, let your phone charge a bit.
Once charged up, turn it on and get it into Fastboot. From there you can use the DROID RAZR HD UTILITY 1.21 (http://forum.xda-developers.com/showthread.php?t=2307439). In that utility option 1 will bring you back to complete stock ROM, option 2 will bring you back to a stock recovery. This will completely erase your phone.
This should at least give you a fresh functioning phone. If you want to try to keep your data or personal files, I'm not sure what you could load via fastboot to get yourself a functioning phone again (maybe just a kernel?).
As a side note, I used TWRP to load the update and my phone updated except the radios it seems. It sounds like the same thing happens with the stock recovery.
Lenny
Click to expand...
Click to collapse
that's what i want to do, but i cant because my power button is broken! so i cant enter to fastboot mode without the power button.. i will have to open my phone and try to fix the power button myself.
Just to make a point and to clear up any confusion, this Update will not lock the Bootloader. If you have an Unlocked Bootloader then you will have an Unlocked Bootloader after the update, regardless if it fully works or not, and even if you lose Root, the Bootloader will still be Unlocked. If Root is lost with an Unlocked Bootloader, I suggest downgrading through an FXZ of either 9.16.6 or 9.16.9 and restore Root.
Hi! I was using my N7 3G reading the news and suddenly it became unresponsive. It took about 2 seconds to recognize my touch. So i decided to turn it off and turn it back on. But after it turned back on the touch screen is completely dead. I can't even unlock it. Power and volume buttons still work. I'm on CM 10.1.3
I even forced reboot it many times by holding the power button for about 20s but that didn't help. Anyone ever had this issue too? It seems like a hardware problem. If that's the case i would have it repaired by ASUS but I'm afraid that I won't get warranty because I'm not on stock ROM+rooted+unlocked bootloader
Can you get into recovery? If so, try wiping the cache partition first to see if that helps.
If that doesn't help, do you have usb debugging enabled? If so,
should be able to use the Nexus 7 toolkit. Just boot your tablet, plug it in your machine, fire up the Nexus 7 toolkit and have it unroot and relock your BL.
You might also want to try and see if you can backup your data partition and your internal storage with the N7 toolkit. If you can do that, then you won't lose any of your data or application settings.
You should also be able to flash it back to stock as well via the toolkit and have it erase the user data.
If usb debugging is NOT enabled, then you might be hosed. You could at least do a factory reset in the main recovery.
Other than that, not much else can probably be done unless you want to open your tablet yourself and ensure all the connections are tight. There might be a lose connection for the digitizer and that's all you would need to do to fix it. Of course, that voids your warranty if you open it yourself. I don't know exactly where the hook up is. I'm sure a quick Google will tell you how to fix this if it's possible.
It definitely sounds like either your digitizer is bad or it's got a lose connection.
Good luck!
Sent from my Nexus 7 using Tapatalk 4
thanks for your help. I was going to plug it in my PC BUT IT'S WORKING AGAIN. I was like WTF lol :laugh: . So it must be a lose connection i guess .
By the way, I'm planning to go back to stock in case it happen again so that i can get my warranty at ASUS. And I don't know much about rooting/ flashing so I want to ask some questions .
1. Can I flash google's stock ROM just like flashing other ROMs like CM with bootloader unlocked?
2. Have you tried KitKat. If so have you experienced battery drain? The only reason I rooted and installed CM is that I hate the battery draining issue. I had it since I updated my N7 3G to 4.2.2 and it kept happenings in 4.3
Anyway thanks a lot :good:
So far no major issue with battery and yes flashing process is the same just be careful u need to update ur bootloader to go to 4.4 and flashing wrong bootloader will brick ur device to be careful and read every thing.
Please ignore my spelling mistakes. English is not my native language.
xateeq said:
So far no major issue with battery and yes flashing process is the same just be careful u need to update ur bootloader to go to 4.4 and flashing wrong bootloader will brick ur device to be careful and read every thing.
Please ignore my spelling mistakes. English is not my native language.
Click to expand...
Click to collapse
Well, I used wug's nexus root toolkit to root and unlock bootloader. If I use the option:"go back to stock lock bootloader and flash stock", can I install update from OTA like normal again?
Choriandus said:
Well, I used wug's nexus root toolkit to root and unlock bootloader. If I use the option:"go back to stock lock bootloader and flash stock", can I install update from OTA like normal again?
Click to expand...
Click to collapse
YES
Hi There,
My colleague complained that he had an OTA update on his Nexus 6P and the after the update it was stuck in a boot loop where the Google logo keep on displaying.
When he bought back, he had showed it a shop already which they said they couldn't fix. However, the phone was later given to me for help and I have somehow manage to connect the device on fastboot and adb. Tried all the possible options such as unlocking the bootloader, loading .img's one by one... sideloading... etc.
No matter what I do, it keeps on doing the same boot loop. And when I leave the bootloader unlocked, it gives an error at first, then again goes back to the same.
Not sure whether what I am doing wrong or whether am I choosing the wrong build or so... would anyone care to advise?
.G33K said:
Hi There,
My colleague complained that he had an OTA update on his Nexus 6P and the after the update it was stuck in a boot loop where the Google logo keep on displaying.
When he bought back, he had showed it a shop already which they said they couldn't fix. However, the phone was later given to me for help and I have somehow manage to connect the device on fastboot and adb. Tried all the possible options such as unlocking the bootloader, loading .img's one by one... sideloading... etc.
No matter what I do, it keeps on doing the same boot loop. And when I leave the bootloader unlocked, it gives an error at first, then again goes back to the same.
Not sure whether what I am doing wrong or whether am I choosing the wrong build or so... would anyone care to advise?
Click to expand...
Click to collapse
So the bootloader is unlocked? Exactly which build have you attempted to flash with fastboot? Have you tried flashing one of the full OTA zips with the stock recovery?
PS. Whatever you do don't lock the bootloader. And don't worry about the warning you get with the bootloader unlocked, that's normal.
Heisenberg said:
So the bootloader is unlocked? Exactly which build have you attempted to flash with fastboot? Have you tried flashing one of the full OTA zips with the stock recovery?
PS. Whatever you do don't lock the bootloader. And don't worry about the warning you get with the bootloader unlocked, that's normal.
Click to expand...
Click to collapse
Thank you for the reply.. I have only locked the bootloader when I'm done with flashing... etc as it was giving me error. Regardless of the bootloader state, it kept on going through the bootloop like it didn't care.
I tried to flashing the factory image which is MTC19T and also tried the OTA which is MTC19V as said in here.
Still there's not luck!
.G33K said:
Thank you for the reply.. I have only locked the bootloader when I'm done with flashing... etc as it was giving me error. Regardless of the bootloader state, it kept on going through the bootloop like it didn't care.
I tried to flashing the factory image which is MTC19T and also tried the OTA which is MTC19V as said in here.
Still there's not luck!
Click to expand...
Click to collapse
Don't worry about the warning and definitely don't lock the bootloader because if it gets stuck locked you'll really be screwed. Go to my guide here:
http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
Follow the instructions in section 10 (use the latest MTC19X build). Skip the part at the beginning about performing a factory reset because you can't actually get the phone to boot to do that. Make sure you include the "fastboot format userdata" command at the end (this will erase all data on the device). Leave the bootloader unlocked.
Heisenberg said:
Don't worry about the warning and definitely don't lock the bootloader because if it gets stuck locked you'll really be screwed. Go to my guide here:
http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
Follow the instructions in section 10 (use the latest MTC19X build). Skip the part at the beginning about performing a factory reset because you can't actually get the phone to boot to do that. Make sure you include the "fastboot format userdata" command at the end (this will erase all data on the device). Leave the bootloader unlocked.
Click to expand...
Click to collapse
I have actually tried doing what section 10 says but with a different stock build.. Does that effect as well? However, let me give another shot with your said build and post back.
.G33K said:
I have actually tried doing what section 10 says but with a different stock build.. Does that effect as well? However, let me give another shot with your said build and post back.
Click to expand...
Click to collapse
Did you format userdata? It's worth a try.
Heisenberg said:
Did you format userdata? It's worth a try.
Click to expand...
Click to collapse
Yes, sire! I did all the possible things I could do without harming or bricking the device... Read each and every instruction carefully to do... but turned with no luck... however, I'm due to try the method and build you have suggested, I shall try that and get back to you!
.G33K said:
Yes, sire! I did all the possible things I could do without harming or bricking the device... Read each and every instruction carefully to do... but turned with no luck... however, I'm due to try the method and build you have suggested, I shall try that and get back to you!
Click to expand...
Click to collapse
It probably won't work, any build should work, but it's worth a try. If that fails I can only suggest flashing TWRP recovery and trying to flash a custom ROM to see if that works.
So long as you have the bootloader.img and radio.img files, you can try to format boot as well, however Heisenberg may yell at me for even typing that
I had a similar issue - bootloop, but it was getting to the boot animation for about 3 seconds, then rebooting. When I formatted all the areas before flashing them from the stock image, it allowed me to boot up as normal. Stable ever since.
Hi There,
Coming back to the issue, I have just downloaded the build that was suggested by "Heisenberg" and tried it. It was still the same, as in the Google logo keep on flashing but the android bot just appeared once with the logo. But still there not luck as the device stays with Google logo but does nothing.
However, I'm able to see the device on fastboot. Nevertheless, I cannot seem to use adb command.. it doesn't even list on devices. Does that mean the adb isn't working?
Meanwhile, all my fastboot commands are working with no issues at all.
EDIT: When I tried the TWRP recovery, I can flash the recover, but I can seem to go to the recovery window at all as the device keep on showing "The device software can't be checked for corruption". When I pass that also the same boot loop.
I too am having the bootloop issue on my stock Nexus 6P. Is there a way to unlock the device from the bootloader? I'm unable to carry out step one on Heisenberg's guide because I'm unable to actually boot up my phone past the Google logo. Am I pretty much screwed?
bcjk8210 said:
I too am having the bootloop issue on my stock Nexus 6P. Is there a way to unlock the device from the bootloader? I'm unable to carry out step one on Heisenberg's guide because I'm unable to actually boot up my phone past the Google logo. Am I pretty much screwed?
Click to expand...
Click to collapse
Unfortunately yes. Unless you enabled OEM Unlocking in the developers menu before your phone went sideways you probably have a hard bricked phone. Is it under warranty?
I went through this in November with a completely stock Nexus 6P. I was 3 days past my one year warranty! Google would not send me a new phone. It was completely bricked by the OTA update I received! I was put in touch with Huawei. I had to send the bricked phone to them. 10 days later I received a working model back. Unacceptable that an OTA update trashes a one year old $650 phone. Luckily I had my OnePlus One still, and was able to use that while I waited. I was even able to update that to 7.1.1 since it was rooted. Obviously there is some sort of issue that we are not being told of regarding the dangers of accepting OTA updates on a stock/bootlocked phone.
TemplesOfSyrinx said:
I went through this in November with a completely stock Nexus 6P. I was 3 days past my one year warranty! Google would not send me a new phone. It was completely bricked by the OTA update I received! I was put in touch with Huawei. I had to send the bricked phone to them. 10 days later I received a working model back. Unacceptable that an OTA update trashes a one year old $650 phone. Luckily I had my OnePlus One still, and was able to use that while I waited. I was even able to update that to 7.1.1 since it was rooted. Obviously there is some sort of issue that we are not being told of regarding the dangers of accepting OTA updates on a stock/bootlocked phone.
Click to expand...
Click to collapse
Bootloop issues are common on the 6P even with custom ROMs--it just happens to be much more likely you can recover with the custom ROMs installed since the bootloader is unlocked. I think it's a hardware issue with the 6P rather than an OTA issue. It's probably not an accident that Huawei didn't make the Pixels.
Doesn't seem right that I have to "void" my warranty and install a custom ROM on an unlocked, rooted phone in order to recover from a hardware defect. That's BS pure and simple. I want to use the latest software, that's why I bought a Nexus. I want to use all the conveniences like Android Pay. That's why I don't unlock or root anymore. I rooted every Android phone I ever had until now, starting with the original Motorola Droid. Now that security is so important to Google, and you can't use all the Android features with an unlocked bootloader, they need to step up to fix these problems.
This happened to my wife's phone, sent back to Bell. Will see what happens.
TemplesOfSyrinx said:
Doesn't seem right that I have to "void" my warranty and install a custom ROM on an unlocked, rooted phone in order to recover from a hardware defect. That's BS pure and simple. I want to use the latest software, that's why I bought a Nexus. I want to use all the conveniences like Android Pay. That's why I don't unlock or root anymore. I rooted every Android phone I ever had until now, starting with the original Motorola Droid. Now that security is so important to Google, and you can't use all the Android features with an unlocked bootloader, they need to step up to fix these problems.
Click to expand...
Click to collapse
Unlocking the bootloader doesn't void the warranty on the Nexus 6P. If you are under warranty then just RMA the phone if an OTA bootloops your phone. It's your choice whether to keep the bootloader locked or not but if you keep the bootloader locked it's probably impossible to recover from a bootloop. Google keeps factory images for Nexus and Pixel phones on its website but you can't flash those images with a locked bootloader. Why would they provide the images if using them voided your warranty?
You are missing my point. If I unlock my bootloader so I can recover from a boot loop that may happen, I will no longer be able to use a huge feature of the phone. Android Pay will no longer function. In days passed the rumour was your warranty was void if you unlock. I assume that was started to keep people from doing it. All I know is I paid good money for a phone that is a disaster waiting to happen it seems.
If having an unlocked bootloader is so important to recover from a bricked phone, why do they lock it in the first place? And why won't Android Pay work with it unlocked? The answer is that you no longer have a secure phone if you unlock the bootloader.
bcjk8210 said:
I too am having the bootloop issue on my stock Nexus 6P. Is there a way to unlock the device from the bootloader? I'm unable to carry out step one on Heisenberg's guide because I'm unable to actually boot up my phone past the Google logo. Am I pretty much screwed?
Click to expand...
Click to collapse
What Android version you had on your phone? What's your emmc name and ram name in bootloader? What's the manufacturing date in bootloader?
TemplesOfSyrinx said:
You are missing my point. If I unlock my bootloader so I can recover from a boot loop that may happen, I will no longer be able to use a huge feature of the phone. Android Pay will no longer function. In days passed the rumour was your warranty was void if you unlock. I assume that was started to keep people from doing it. All I know is I paid good money for a phone that is a disaster waiting to happen it seems.
If having an unlocked bootloader is so important to recover from a bricked phone, why do they lock it in the first place? And why won't Android Pay work with it unlocked? The answer is that you no longer have a secure phone if you unlock the bootloader.
Click to expand...
Click to collapse
I think you bought the wrong phone. Nexus devices were never available commercially through carriers and were made for developers and people who like to flash things with their phones. There are ways to use Android Pay with an unlocked bootloader if you are so inclined. You are right that an unlocked bootloader is considered less secure but if you only install apps from Google Play or another trusted source you shouldn't have problems. You can also simply enable allow Oem Unlock in the developer menu. This doesn't actually unlock your bootloader but makes it possible for you to unlock it via fastboot if you get bootlooped and need to flash a factory image to restore. This way you can unlock the bootloader in an emergency but your phone is still secure. I think this should be enabled by default when the phones are shipped. Too many people with locked bootloaders end up with hard bricked phones where the Nexus 6P is concerned. Honestly, you would probably be better off selling your Nexus and getting something else that's more stable and made for people who have no Interest in flashing anything.