Related
hey guys so today I finally rooted my HTC Legend, installed rom manager, made my backup using clockwork i believe? well i installed clock work, then i made a backup of my rom, now I tried to install CyanogenMod from rommanager and also installed google apps...
The problem is now..
When i turn the phone on it keeps looping on the blue logo with the elctricity going around...cant turn it off cant do anything, have to manually take the battery out and start it up again..
Im not sure how to get my original rom back on, but i tried to get into the recovery menu atleast..I can get to the fastboot, but when i go into bootloader, then click recovery it does everything normally, it shows the red triangle, I run recovery-windows.bat ( provides in Paul's tutorial at modaco ) and it says device not found..
EDIT: before I installed cyanogen, i disabled debugging mode for something, and I dont think i turned it back on :S I think it may have something to do with me not getting into recovery...what do i do! :'(
Put the Clockwork Mod Fake flash update.zip from the Development Forum on your SDCard and then go again in Recovery, until you see the red triangle. Then hit Volume up + Power and select flash update.zip. You should boot in Clockwork Mod Recovery then.
I dont even think you need to put fake flash on your card. If you choose to install clockwork recovery through rom manager its there. The reason your in a loop is that you didnt clear enough before installing CM 6. Enter clockwork recovery by volume up and power, it can take some trys. There factory reset, wipe cache and wipe dalvik cache. Reinstall CM 6 + google apps and reboot. You should be good to go!
Sent from my Legend using Tapatalk
OMG! Thank you so much! I booted into clockwork, and am currently "restoring" to my default one when i first rooted..hopefully it works!
EDIT: YESS IT WORKS! I FCKING LOVE U!
i was running ice glaicer and wanted to try a new rom so i booted into recovery mode with clockwork, wipe data, wiped partion and then flashed the new rom. Everything went fine but now the phone won't boot, it just hangs at the white t-mobile mytouch 4g
any help would be great...thanks
swaggerbot3000 said:
i was running ice glaicer and wanted to try a new rom so i booted into recovery mode with clockwork, wipe data, wiped partion and then flashed the new rom. Everything went fine but now the phone won't boot, it just hangs at the white t-mobile mytouch 4g
any help would be great...thanks
Click to expand...
Click to collapse
Make sure you have clockwork recovery 3.0.0.6 when flashing your phone. It says 3.0.0.5 in rom manger but it really not. Pull the battery. Then when the phone is off. Hold down the volume down button and press the power button. It should boot up in the bootloader. Then go to recovery. Once your in recovery makes sure it says 3.0.0.6 at the bottom or top. Then check In the thread the rom you downloaded if you needs recovery 3.0.0.6 or not. Make sure the rom is completely downloaded same MB same md5 sums. If its not go to your phone and go to mount/storage mount the SD card remove the bad download by deleting it and drag and drop the newly downloaded rom. Ummount the sdcard then wipe data/ factory reset on your phone. Then in mount/storage mount/data, mount/cache, mount/ system. Format them each and then format boot. After go to advanced and wipe dalvik cache. After go to the rom you want to install and install it. Let it finish reboot system. Let the rom boot wait 5 minutes then you should be good to go.
Sent from my HTC Glacier using XDA Premium App
THANK YOU!!! this worked...i really appreciate it
I am a total noob and am having trouble installing CyanogenMod onto my Nexus S 4G. I barely rooted the darn thing, and I am using a guide that involves ROM Manager. It says I have to mount the SD card using ROM Manager, but I can't figure out how to. If there is a better way to install CyanogenMod, please tell me, because all the guides I have been finding are way too technical for me to understand, and I have been trying. Any help is appreciated.
Can you tell us which guide you are using and which step you are on? I think you must mean ClockworkMod not ROM Manager.
Sent from my Nexus S using XDA App
If you already have clock work then all you have to do is drag and drop cyanogen into the root of your sd card. Then flash through clock work.
ht tp://ww w.redmondpie.com/install-cyanogenmod-7.1-gingerbread-rom-on-nexus-s-4g-how-to-tutorial/
That's the guide I was using, I got stuck on step 4.
Is the rom the .zip file I downloaded from the cyanogen site, or is it inside the folder?
The rom is the zip file. Boot into recovery and select choose zip from sd and navigate to it and install it.make sure to do a back up and wipe cache,dalvic and do a factory rest before flashing the rom
Sent from my Nexus S 4G using XDA Premium App
Paleryder said:
make sure to do a back up and wipe cache,dalvic and do a factory rest before flashing the rom
Click to expand...
Click to collapse
Can you explain this part more? Is this the part of the guide that says "make a nandroid backup"?
1. Mount USB and drag and drop cm7 zip & Google apps into root of SD card.
2. Turn off nexus.
3. Boot into fastboot by holding volume up and then power button.
4. In fastboot go to recovery (power button is used as enter button, volume buttons represent up and down)
5. In recovery go to backup and restore and back up your current rom.
6. Go back and then wipe data factory reset and also wipe cache.
7. Go to advanced -> Wipe delvik cache.
8. Go back and then go to install zip from SD, find cm7 flash it, then flash Google apps. You can flash kernel right now if you want.
Hope this clears anything up
Sent from my Nexus S 4G using XDA App
I got to your step 5, but when I choose Recovery, after showing the Google logo it briefly shows a box and an arrow coming out of the box and an Android logo, then the box changes to a triangle with an exclamation mark. It stayed like that so I just rebooted the phone.
seb0910 said:
I got to your step 5, but when I choose Recovery, after showing the Google logo it briefly shows a box and an arrow coming out of the box and an Android logo, then the box changes to a triangle with an exclamation mark. It stayed like that so I just rebooted the phone.
Click to expand...
Click to collapse
That means you don't have Clockwork recovery installed. You need to download the latest Clockwork recovery image and place it in the tools folder of your Android SDK Folder(wherever you placed it). Then press shift and right click on the tools folder and select "open command prompt here". Then boot your phone into bootloader by pressing volume up and power button at the same time. Connect your phone to your computer via usb cable and in the command prompt you opened type: fastboot flash recovery name of recovery image here.img and press enter and you will see in the command prompt window it will say sending image. When it is done scroll down to recovery on your phone using the volume buttons and press power to enter. Your phone will reboot into Clockwork recovery and from there you can continue on the previous posts steps. Hope this helps. You can download the latest Clockwork by going to this thread: http://forum.xda-developers.com/showthread.php?t=1078213 and clicking on the brown "CWM Recovery" under 'How to: Root the Nexus S 4G'.
well I'm pretty sure I do have clockwork because there's a folder on my phone that is called clockworkmod, and I did root the phone successfully at the very least, but I'll try putting a new one there.
seb0910 said:
well I'm pretty sure I do have clockwork because there's a folder on my phone that is called clockworkmod, and I did root the phone successfully at the very least, but I'll try putting a new one there.
Click to expand...
Click to collapse
Alright here is a little run down on whats going on with your ns4g, you probably already flash clockworkmod on your nexus, but what samsung did was that it will try to revert back to the stock recovery. So what you have to do is flash Clockworkmod again to make it stick. Honestly it is good that it doesn't stick because then it would be easier to unroot the phone.
So now you have 2 different options on how to flash clockworkmod. 1) you can do it through fastboot but you have to have adb set up. I'm not sure what method you used to root your phone so i am just assuming.
2) you can download rom manager and flash clockwork through there. (Honestly i haven't done it through this method so i cant tell you of the pros or cons that are attributed with this).
NOTE: If you dont have super user yet it would be a prime time to flash it once you got CWM going.
For me, I only needed to flash clock work twice through fastboot in order to make it stick.
Good luck.
The guide I originally was using for this had me using rom manager, but it kept telling me I had to mount the SD card even though it was shown up in my computer.
If I were to flash clockwork again with adb setup, how would I do that? Sorry to be so asky, I just want this process to end correctly.
You have to set up adb if you don't have it already, go to ns4g development and go to vandam's thread that has all the list of rom's and rooting guides. Check out wolverines rooting guide, he goes indepth on how to set up adb. It make take awhile to set up but learning how to work in fastboot is essential in rooting the nexus.
Good luck
Sent from my Nexus S 4G using XDA App
Well it was confusing and I almost asked for help again, but I finally got it flashed again and now cyanogen is working. I really appreciate the help and for pointing neon the right direction. As a final note, is there anything else I should know, like updating or something, just general knowledge (basically, "now what?")?
seb0910 said:
Well it was confusing and I almost asked for help again, but I finally got it flashed again and now cyanogen is working. I really appreciate the help and for pointing neon the right direction. As a final note, is there anything else I should know, like updating or something, just general knowledge (basically, "now what?")?
Click to expand...
Click to collapse
Did you get all the Google Apps installed too? That's the only "unusual" aspect of CyanogenMod.
Yep I got the Google apps.
Congrats dude its good you got it all working, BTW when ever you switch roms like from CM7 to miui you always have to wipe data, cache, and delvik cache. Delvik cache is in the advanced tab of CWM. If your just up updating from different versions of the same rom, you just need to wipe cache and delvik cache. That's about it, the hard part is done, enjoy flashing.
chewbz said:
Congrats dude its good you got it all working, BTW when ever you switch roms like from CM7 to miui you always have to wipe data, cache, and delvik cache. Delvik cache is in the advanced tab of CWM. If your just up updating from different versions of the same rom, you just need to wipe cache and delvik cache. That's about it, the hard part is done, enjoy flashing.
Click to expand...
Click to collapse
Actually if you are updating from different versions of the same rom, you don't need to wipe anything, you just flash it.
Ok guys..... newbie here .... literally I'm new to Boot unlocking, root, Flashing etc.
Anyway I have followed this forum for so long that I decided to take plunge yesterday and get my hands dirty.
Here is what I did:
Unlock bootloader, root and install recovery on my Atrix 4G. Atrix was @ 2.3.4 and 4.5.91 during unlocking & root.
Rebooted the phone and everything seems to be in place. Atrix loaded like the way I bought it 7 months back. No problem until now.
Also created a restore folder on my external SD. Worked fine and was successful in creating backup with time stamp
Now here are my steps and subsequent issues that I'm facing:
1. Downloaded CM9 zip file from this thread(http://forum.xda-developers.com/showthread.php?t=1500535) along with Gapps to my external SD
2.Entered recovery mode during bootup and tried to flash CM9 and Gapps. Flashing seem to have gone well and completed (note I did not do clear data, clear cache or clear dalvik cache under advanced options being a newbie)
3. Reboot the phone and can only see red Moto logo and unlocked on top. Left for about 5 minutes and nothing happened.
4.Did a battery pull and entered recovery mode. wiped data, cache & cleared dalvik cache
5.Went to Install zip from sdcard option and tried to reflash CM9. Flashing seems to have gone well and completed
6. Reboot phone and again can only see Moto Red logo with unlock on top and nothing more.
7.Battery pull followed by recovery. But This time I tried to restore from my external SD. also wiped data, cache & dalvik cache
8.Restore took about 3 minutes and completed.
9.Reboot the phone. Now the phone boots and goes to Rethink possible screen and get sstuck.
10. Left it for 1 hr....nothing.
11.tried steps 7-9 again and still stuck in "Rethink possible" screen during boot.
What did I do wrong? Did I soft brick the phone? I can still enter recovery mode and read my internal and external SD and can see all files. i hope I didn't brick my phone doing this. If I did, I would regret!
Here are my options:
1.Try a stable ROM like CM7 and see what happens. I didn't want to do too much damage so haven't tried this option yet.
2.I know there is a way to hide 'unlock' during boot up (if someone can point to it obviously). Hide the 'unlock' and return the phone to ATT and tell them that phone would not boot after 2.3.6 update and get a refurbished one
Please let me know what your thoughts are. I'm currently crapping on my pants
Edit: I just tried Newtrino rom and stuck @ Moto screen which says unlock.
Edit 3/4/2012: Please go to the last post for the solution. Tenfar's CWM is old and cannot deal with latest ROMs. Use ROMRACERS latest CWM or touch based Koush's CWM for future ROM flashing.
Old CWMs will give you sleepless nights!
Ok tried restore again after wiping data, cache & dalvik cache.
Now after reboot, My Moto Logo screen says unlock and just starts flashing.
I can still get into recovery......
can someone please help me......
What you can do is: install a "stable" ROM of Gingerbread:
--Go in recovery, put a .zip of the ROM on your sdcard (with your computer), and after wiping data, install it .zip.
--Or you install a new ROM with fastboot
Anyway, be careful with your battery, because if it is empty, with no ROM on your phone, it'll be crap!
vsg005 said:
What you can do is: install a "stable" ROM of Gingerbread:
--Go in recovery, put a .zip of the ROM on your sdcard (with your computer), and after wiping data, install it .zip.
--Or you install a new ROM with fastboot
Anyway, be careful with your battery, because if it is empty, with no ROM on your phone, it'll be crap!
Click to expand...
Click to collapse
thank you for your response. However I tried that already Nutrino GB ROM. Again, I would go to 'M' screen which says unlocked and its stuck there for ever.
I used tenfar's CWM. Not sure if I need to use any other CWM. Also since my phone doesn't boot, I'm not sure how I can install any other CWM
Masterguy said:
thank you for your response. However I tried that already Nutrino GB ROM. Again, I would go to 'M' screen which says unlocked and its stuck there for ever.
I used tenfar's CWM. Not sure if I need to use any other CWM. Also since my phone doesn't boot, I'm not sure how I can install any other CWM
Click to expand...
Click to collapse
Don't worry, soft bricks are easy to recover on the Atrix thanks to us being able to access fastboot.
For flashing a new recovery:
While your phone is off, press Volume Up + Power to power up, then release when a menu appears on your screen and navigate with volume down until you see Fastboot, select it with the volume up key.
Get the necessary files for fastboot, place them all in a folder called "moto" in your C: drive, and type in the following in a cmd window (assuming you're using windows and that the recovery image is called recovery.img):
C:/Moto> fastboot flash recovery recovery.img
C:/Moto> fastboot -w
C:/Moto> fastboot reboot
Now access your recovery wipe dalvik cache, cache, factory reset and then flash a new ROM. It SHOULD boot without issues. I personally use Koush's Clockworkmod Touch, also remember that Neutrino tends to get "stuck" sometimes after the first attempt to boot and requires a battery pull and then you try to boot again. (It takes a while)
littleemp said:
Don't worry, soft bricks are easy to recover on the Atrix thanks to us being able to access fastboot.
For flashing a new recovery:
While your phone is off, press Volume Up + Power to power up, then release when a menu appears on your screen and navigate with volume down until you see Fastboot, select it with the volume up key.
Get the necessary files for fastboot, place them all in a folder called "moto" in your C: drive, and type in the following in a cmd window (assuming you're using windows and that the recovery image is called recovery.img):
C:/Moto> fastboot flash recovery recovery.img
C:/Moto> fastboot -w
C:/Moto> fastboot reboot
Now access your recovery wipe dalvik cache, cache, factory reset and then flash a new ROM. It SHOULD boot without issues. I personally use Koush's Clockworkmod Touch, also remember that Neutrino tends to get "stuck" sometimes after the first attempt to boot and requires a battery pull and then you try to boot again. (It takes a while)
Click to expand...
Click to collapse
Many people also seem to have suggested RACEROM CWM. Which one would you suggest? I'm so nervous about all this now. Just have this butterfly in my stomach
flash the latest recovery and wipe everything in recovery and flash neutrino again. It should work after that. try neutrino 2.2 though. 2.5 still has it's kinks.
1st off, relax. It's difficult to brick your phone from this point Just don't get any bright ideas with .sbfs lol.
As others have said, make sure you're on latest recovery.
Question: are you installing from internal or external SD? Internal is recommended for flashing most ROMs.
Sent from my MB860 using xda premium
Masterguy said:
Many people also seem to have suggested RACEROM CWM. Which one would you suggest? I'm so nervous about all this now. Just have this butterfly in my stomach
Click to expand...
Click to collapse
As someone else said, the ONLY thing you should NEVER do is flash an .sbf or go through an OTA update, that's a surefire way to hard brick your phone. From this point on it's VERY DIFFICULT to completely brick your phone using software only.
RomRacer's CWM is based I think on v5.0.2.7? Koush's latest recovery is v5.8.1.5. I honestly couldn't name any tangible differences other than the touch interface, which is the reason I use it in the first place. (I hate mashing volume keys like a madman) It really doesn't matter which CWM you use, but when I soft bricked my phone I recovered with CWM Touch.
I would recharge your battery to 100% before trying to recover it, as that is one less headache to worry about, but if your phone starts saying 'Battery is too low to flash', do not panic, you only need a USB cable you don't mind sacrificing (doesn't have to be new). I will go into detail in case you actually need to do this.
Just make sure you use the fastboot -w command and wipe EVERYTHING through CWM before trying to flash anything else.
Solved:boot loop issue
littleemp said:
As someone else said, the ONLY thing you should NEVER do is flash an .sbf or go through an OTA update, that's a surefire way to hard brick your phone. From this point on it's VERY DIFFICULT to completely brick your phone using software only.
RomRacer's CWM is based I think on v5.0.2.7? Koush's latest recovery is v5.8.1.5. I honestly couldn't name any tangible differences other than the touch interface, which is the reason I use it in the first place. (I hate mashing volume keys like a madman) It really doesn't matter which CWM you use, but when I soft bricked my phone I recovered with CWM Touch.
I would recharge your battery to 100% before trying to recover it, as that is one less headache to worry about, but if your phone starts saying 'Battery is too low to flash', do not panic, you only need a USB cable you don't mind sacrificing (doesn't have to be new). I will go into detail in case you actually need to do this.
Just make sure you use the fastboot -w command and wipe EVERYTHING through CWM before trying to flash anything else.
Click to expand...
Click to collapse
Thanks I was able to fix my boot up issue using ROMRACERS CWM. I didn't use any command prompt or anything. I just downloaded zip file from this thread, entered recovery mode -->Install Zip from SD card --> Chose ROMRACERS zip --> it automatically flashed the recovery and I then rebooted recovery under advanced options.
After that Wiped data,cache & Dalvik Cache and proceeded to install CM9 and it booted up up flawlessly.
I'm kind of surprised that tenfar didn't add a not to use his CWM as the latest ROMs use latest ext format.
That seems to be issue. However, I'm pleased with your guidance and final output. Thanks a lot dude.
Masterguy said:
Thanks I was able to fix my boot up issue using ROMRACERS CWM. I didn't use any command prompt or anything. I just downloaded zip file from this thread, entered recovery mode -->Install Zip from SD card --> Chose ROMRACERS zip --> it automatically flashed the recovery and I then rebooted recovery under advanced options.
After that Wiped data,cache & Dalvik Cache and proceeded to install CM9 and it booted up up flawlessly.
I'm kind of surprised that tenfar didn't add a not to use his CWM as the latest ROMs use latest ext format.
That seems to be issue. However, I'm pleased with your guidance and final output. Thanks a lot dude.
Click to expand...
Click to collapse
Thank you sooo much. I was having this exact problem. I did what you suggested and my phone works. Thanks!
I rooted my motorola defy using SuperOneClick. It said rooted successfully and I got a superuser app in my menu too. Now, I downloaded ics 4.0.4 firmware package and latest google apps and unzipped it to my sdcard. When I turned off my phone and then switched it on again by pressing poweron+volumedown key, an android icon with an exclamation mark came denying me root access. Please tell me what to do now.
You got it all wrong .
1) You never unzip the rom or gapps
2) Android exclamation mark isn't denying root access, it's just stock recovery, which you can access be pressing both the volume keys together.(but you don't need to do that)
3)After you root your phone ,install defy 2nd init(you can search it in the forum)
,which will install clockworkmod recovery on your phone.
4)flash the rom and gapps through that recovery(press vol down when led turns blue on restart to access recovery)
you can search for detailed threads in the forum.
Okay, I did what you asked me to, installed 2nd init. Did everything. Place the zip file in sd card. Pressed volum down when led turned blue. Unzipped the ics package. Done.
Now, when I rebooted my phone, I got a blue animation saying cynogenmod 9 and that animation is now going on forever. It is not rebooting my phone.
Put out the battery, put it back, start your phone, ready!!
If not, make a factoryreset in the custom-rom-section under stable or latest and reboot.
Okay. You ARE a noob! Sorry, but this really is funny! The op seriously has NO clue what he is up to! My advice: stay away from custom roms until you know what its all about. READ the guides!
Unzipping the rom and flashing it through stock recovery?? Are you trolling??
sent from my Defy+
Hahaha.
Ok when the light goes blue press vol -
1: Go to custom recovery,
2: Wipe data/cache
3: Go to advance
And wipe delvik and battery stats,
4: install update from sd card pick your rom your flashing,
5: Install update from sdcard again pick the kernal you want to flash ie cm9 kernal
6: install update from sdcard chose your gapps you want and flash it.
Do step 1 2 and 3 again then reboot your phone.
You scroll with volume buttons and pick with power button.
If you get stuck just search.
Hope this helped.
defy cm7
okayiamnoob said:
Okay, I did what you asked me to, installed 2nd init. Did everything. Place the zip file in sd card. Pressed volum down when led turned blue. Unzipped the ics package. Done.
Now, when I rebooted my phone, I got a blue animation saying cynogenmod 9 and that animation is now going on forever. It is not rebooting my phone.
Click to expand...
Click to collapse
before posting for help, you should read all the posts and get some information about flashing roms..
and, to solve your problem, you should enter to the recovery (volume down on blue led) and wipe data, wipe cache partition and go to advanced -> wipe dalvik cache.. then your phone should start without any problem