I booted into xRecovery and formated the SYSTEM & DATA partition and reboted the recovery. Now I'm not able to boot the phone please help.
Where do you get up to in the boot process?
Sent from my X10i TripNMiUI using XDA Premium App
At this point you can propably not get into xrecovery! So i think you need to flash the stock generic rom with x10 flashtool. Had this problem before! when you've done that you can just flash and install xrecovery again, then if you had a xrecovery backup, its still there (if u haven't removed it from SD card), so you can juat restore that.
Remember when flashing stock "rom" you will propably get bb 54, so i recommend to flash bb 49, most roms work with that baseband.
Sent from my X10i TripNMiUI using XDA App
Related
i flash original lg fw with lg open with fastboot,i flash clockwork recovery 3.0.1.4,root phone and do a bakeup with cw. but when i try to flash 2.3.3 with fastboot i have this error in step 2 - flash system image. i change usb ports,cables, i do it on 2 comps. i try on xp and w7.disable usb modems in device manager,disable virtual modem too. always same error. only i can doo is to ehtract rom files 2.3.3 and put them in the cw bakeup folder and than do a restore to 2.3.3 that i download from xda. then systhem is working but it cant find my memory card. what can i do to do flash with fastboot. i restore to 2.1 open,then works fine. tnx for help.
Download a cm7 backup folder and flash from recovery. Then do a factory reset wipe cache and battery stats.
Sent from my GT540 using XDA Premium App
eoghan2t7 said:
Download a cm7 backup folder and flash from recovery. Then do a factory reset wipe cache and battery stats.
Sent from my GT540 using XDA Premium App
Click to expand...
Click to collapse
what did you mean with cm7 backup folder? i download mur4ik 1.5 recovery folder(zip) and when i try to install it trough cw 3.0.1.4 -by install zip from sd card,i cant. some error ocures. i can only repack tthish file,or fastboot file and do a restore trough a cw.
is this method-restore(other roms -2.2 or 2.3),same as flash phone with cw 3.0.1.4 or fastboot?
U need to unzip the file put it in clockwork backup ffolder n then restore via recovery....i.e. restore option.....
Sent from my GT540 using XDA Premium App
Hey,
I had the same problem. My solution is: Wait a day and try to flash again and again. Anyway it would run...
how can i update my clockworkmod have tryed through CWM app which updates it but after reset it goes back to old one have tried wit unrevok wich froz on waiting for root and have tried wit terminal which never worked any othr way.
Download cwm Ingram file, then from your PC use fastboot.executive to flash, or else put image in root of SD and use terminal to flash it. Search the forum you will find both methods. Using rom manager to flash cwm is not permanent method. It just boots into recovery and use the 'update zip like ' file to temporary boot into another recovery. It just make use of cwm files in memory card to boot.
Sent from my HTC Wildfire using XDA App
I tried terminal on me fne wil try fastboot wen I find out how after searching around here
Sent from my HTC Wildfire using XDA App
Try this it really works
http://forum.xda-developers.com/showthread.php?t=1207331
Root toolbox works for me, download the image start root toolbox, select advanced then flash recovery, accept the pop-up warning that recovery partition will be wiped, choose the image and then watch......... simples.
Sent from my HTC Wildfire using xda premium
thanks for all your help have done it using Scratch0805 method also Scratch0805 can you tell me how to bump my internal memory up like you have.
Search for 3xeno's custom mtd partition thread, I think its in Dev section.
Sent from my HTC Wildfire using xda premium
Here:
http://forum.xda-developers.com/showthread.php?t=1233340
Don't forget to read through the entire thing carefully if you do attempt it
thanks having a look now see if i am confident enuf to try it
Hello, i am trying to install xRecovery using Flashtool. I am rooted, and do have busybox installed.
I can successfully ask root perms, but when i press install xRecovery, it says
25/026/2011 23:26:39 - INFO - Installing xRecovery to device...
25/026/2011 23:26:39 - INFO - Remounting system read-write
And it just stays there.
Any help is appreciated thanks!
Are you using http://forum.xda-developers.com/showthread.php?t=1196808 ?
do you remove partition cache and dalvik cache because your meant to. also make sure that your installing the correct custom zip that is compatible with your xrecovery and phone firmare i.e 2.3.3.
i'm on YouTube at TheOnlyDealMaker if you want quick vids or need a quick answer to something msg me there
Sent from my X10i using xda premium
Mraiko yes that is the method I am using
Sent from my X10a using XDA App
I am not sure as to how I can wipe my dalvik cache without using xrecovery
Sent from my X10a using XDA App
hello
I'm having problems installing a custom rom on my x8. Already tried the froiobread gingerdx and with the help of this topic, but without results http://forum.xda-developers.com/showthread.php?t=1222348
The first time the phone blocked on the logo. The second time appeared to gingerdx animation but also kept the logo. What am I doing wrong?
I did exactly the steps: Root, Flash, Firmware, Baseband, xRecovery, CWM Recovery
My card is 2 GB and now I have about 500mb free.
Thanks in advance all the help they can give, sorry my bad english
1)flash via flash tool
2)update phone with pc c
3)install xrecovery
4)cheak if ur baseband ends with 15
5)flash froyobread not gingerdx it requires cwm recovery
Sent from my X8 using XDA App
Get help from this thread http://forum.xda-developers.com/showthread.php?p=12442257#post12442257
Sent from my X8 using XDA App
IROC_69 said:
1)flash via flash tool
2)update phone with pc c
3)install xrecovery
4)cheak if ur baseband ends with 15
5)flash froyobread not gingerdx it requires cwm recovery
Sent from my X8 using XDA App
Click to expand...
Click to collapse
Hello IROC_69
Thanks in advance for the answers.
I did exactly the steps you describe. First I tried with the Froiobread xrecovery gingerdx and then tried to CWM. Both were frozen on the logo. I thought it might be very small memory card. I find no other explanation.
I already did restore everything and everything is operational. My question is to know why I can not install any room with the steps described in the forum
install rom and do full wipe (factory reset) in recovery menu
fifo171 said:
install rom and do full wipe (factory reset) in recovery menu
Click to expand...
Click to collapse
current configuration:
Firmware: 2.1-update 1
Baseband - xxxxxxxx0015
2.1.1.A.0.6
rooted
xRecovery
CWM
I have installed the CWM, can i update the rom with gingerdx?
After installing the ROM is that I do the full wipe?
How much space do I need on my memory card?
What kind of format should have the card? NTFS or FAT32?
greetings
yep, install rom and than full wipe
Now it's good. Thank you very much
Need your help to solve another problem
I can not uninstall applications that comes in the mobile phone. Already installed the app manager but can not uninstall anything that is already in default operating system. Is there any way to uninstall these programs?
greetings
Use titanium backup
Sent from my U20i using xda premium
Hey Dude,
Find online market through your xperia and look for SYSTEM APPLICATION REMOVER which is green colour.
download and install - It need to root permision so better restart after installation.
Try & Enjoy !!!
Hi all. Sorry fo my bad English - I'm russian.
Ok, I have a bricked ZTE Blade - GEN2, China 256Mb RAM.
I've read this topic modaco com/topic/343587-guide-de-bricking-a-zte-blade/
I have some problems, thats why I'm asking for some help.
1) I've used Method 5: The dodgy ZTE firmware flasher
At the point Flash Firmware - 6)When finished it should boot into FTM mode. - but it doesn't.
I've took out the battary, and rebooted my phone in the FTM-mode. Succesfully restored IMEI (got no errors).
And then:
Put clockworkmod in the recovery partition
Take out the battery and turn on the phone. Clockworkmod should load
There is no ClockWork! Only FTM...
Installed ClockWork via cmd script. It has loaded, but here is the next problem:
"You can now flash a ROM"
I've tried to flash Swedish_Spring_RLS5. So I mounted system and data.
Installation ok, but if i reboot i get clockwork.
Tried to flash image.bin from zte-website. If i reboot after the installation i get clockwork.
Tried to get stock recovery. Installed it via cmd script, but it doesn't load.
I get FTM-mode.
There is no phone-workshop in my city, and I have no more warranty for this smartphone, so i hope you can help me. Thanks.
At the beggining the problem was - the boot was down. The splash appeares, slides to right, the phone reboots.
Try reflashing clockworkmod and do a full wipe.
It might also help if you format system.
Sent from my GT-I9300 using xda premium
doesn't helped
Ok, reinstalled cwm, have done all wipes, formatted system,data.
Tried to flash.
Nothing. Reboot => CWM
Does the rom flash process success?
Try flashing another rom.
Sent from my GT-I9300 using xda premium
yes
yes, it does. i get no errors, and
there are files in the system partiton.
when i make a backup i see all the files from the os.
have tried. cm7, cm9, other stock: 2.1, 2.3 - every gives the same result - only cwm is loading.
when i flash the stock recovery - then i get only ftm on load.
is my phone totally bricked? i hope there is a way to restore...
It's semi-bricked. You could try to flash stock rom with ftm and root it with z4root.
Sent from my GT-I9300 using xda premium
ok
ok. i will try P729J_2GW900V2.2.0B01-NO_RECOVERY-update_signed.zip
will update this message when done.
--- upd
tried:
1) china tpt's
2) all wipes and formats
3) all mounts + flashing Swedish_Spring_RLS5
4) boot.img via adb
result: ANDROID Loaded, but the hardware keys are not working... UrbanDrawer, any ideas?
Just reflash rom and wipe data.
If the problem didn't get fixed, flash another rom.
Sent from my GT-I9300 using xda premium
no success
Flashed a stock China ROM.
No success. Boot info FTM. No way to boot the system...
Tried another ROM's for 512Mb models - same result: FTM-mode :crying:
Any other ideas?
UrbanDrawer said:
Try to flash stock rom with ftm and root it with z4root.
Click to expand...
Click to collapse
Before doing this, you could also hard reset the phone, that way there's not going to be any software-related problems.
Sent from my GT-I9300 using xda premium
what i do
Ok. What i do.
1) Launch ZTE Flasher, swich my phone into download mode (vol+/vol-/power)
2) Flash IT (China v880 Firmware)
3) When finished - release battery.
Turn on and get FTM-mode, no clockword or smth. else. Only FTM.
4) TPT's : China v880 GEN2 TPT's.
When finished - the phone doe's not reboot. Need to release the battery, and to power on.
5) Oh my God! Yellow CWM!!! :laugh:
I mount data,system.
All wipes.
Format all, except SD.
6) Flashing ROM.
7) Reboot.
After the reboot I get CWM (on stock rom's) or FTM (after CM).
What am I doing wrong?
Try method 1.
http://www.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/
Sent from my GT-I9300 using xda premium
cwn
No chance. CWM loading. No ROM
Did you format boot, system, data, cache, and sd-ext?
Sent from my GT-I9300 using xda premium
UrbanDrawer said:
Did you format boot, system, data, cache, and sd-ext?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Sure. I did!