Database Users

Openfire ROM Problem

Apologies for the double post but I'm dying to get my wildfire back working.
Rooted it yesterday with unrevoked, attempted to add the Openfire ROM this morning with everything going fine untill the reboot. I'm now stuck on the white HTC screen and have been for the last hour. Any help would be great, cheers.

did u do nandriod back up first
Sent from my Archos5 using the XDA mobile application powered by Tapatalk

I backed up the stock firmware I already had manually, before it prompted on the flash.

did you do a full wipe before flashing the rom?

No i didn't, thought it would be safer incase something went wrong?

run your restore then I couldn't get it to work either
Sent from my Archos5 using the XDA mobile application powered by Tapatalk

if you did a nandroid backup of your stock rom then you should be fine to wipe, since you did not wipe and flashed the new rom over your stock rom, apps and settings will conflict, therefore not work...

Right I see, I'm currently going through what I'm guessing is the restore....recovery - Nandroid, I'll let you know how I get on.
Thanks again.

Nope I seem to be getting nowhere here, can someone point me in the direction of the restore?

you didn't do nandroid backup did you haha, you'll have to install an RUU file to return to stock rom, or just do a full wipe and flash a new rom like openfire or wildpuzzle.

Where can I find the RUU file and how do I access my SD card? USB won't let me get to it, I'm guessing the phone is in charge mode?

go into recovery - partitons menu - mount sd card (or somthing like that) to open your memory card

Spot on, I'm on downloading an ruu file now, going to load it up with a stock rom then try flashing it again, but wiping it this time.

Infact how do I do a full wipe? I'm after the easiest way to get the phone booting up so I can flash it properly?

Anyone?
I'm still no further than I was three hours ago!
EDIT:
BREAKTHROUGH!!! =D
Restored it to before I flashed it incorrectly. Nearly threw the phone across the room in excitement.

go into clockwork recovery and click the title "wipe data/factory reset" and then flash the ROM you want to use.. to install a ROM:
- "install zip from sdcard"
- "Choose zip from sdcard"
- "click the zipfile"
- "yes"
- "reboot"
and if you want to install RUU dont ask me never done that

Reggie24 said:
Anyone?
I'm still no further than I was three hours ago!
EDIT:
BREAKTHROUGH!!! =D
Restored it to before I flashed it incorrectly. Nearly threw the phone across the room in excitement.
Click to expand...
Click to collapse
How did u restored it .....????

sunny_16977 said:
How did u restored it .....????
Click to expand...
Click to collapse
From the HBOOT screen go to recovery, then nandroid, restore, and to the appropriate time/date.
I've still had no luck with actually flashing the phone though. Back to Android 2.1 for me.

I'm 99% percent sure you have the OC issue some ppl incl myself on here have - try reinstalling openfire if thats what you wanna use - and then go to wildpuzzle thread - dl 0050 and flash it. If i'm correct phone will be fine and use openfire - but will NOT be overclockable. I wish Jacob had my phone or got hold of a phone w that problem...

I had problems with the Wildpuzzle 8.0.11 ROM, it would just sit there (did a ADB logcat on it, but I've lost the actual log... sorry! ) ignoring a duplicate entry (yeah, I did a full wipe . Removed WP and put on the latest OpenFire ROM... omg... what a difference to the stock ROM! Soooo much faster, even before I overclocked it.
I'd say, if you have boot issues with WP give OpenFire a go. Certainly worked a treat on my Wildfire.

[Q] i need help fixing my phone

i have a rooted sprint epic. I was on the viper rom and tried the ec05 update from clockworkmod v2.5.1.0 and it said failed, then i tried installing [ROM][ACS] SyndicateROM Frozen 1.1.0 (Takiya) : and it said complete, when i rebooted it was stuck on the samsung screen for 15 minutes. I tried a different rom and it keeps saying aborted. I tried doing a restore through clockworkmod and it gets stuck on restoing chache, lost and found. it just sits there and does nothing.
when clockwork opens up it saids E:cant open /cache/recovery/log
can someone help me as to what i should do to get my phone running again?

gt2776 said:
i have a rooted sprint epic. I was on the viper rom and tried the ec05 update from clockworkmod v2.5.1.0 and it said failed, then i tried installing [ROM][ACS] SyndicateROM Frozen 1.1.0 (Takiya) : and it said complete, when i rebooted it was stuck on the samsung screen for 15 minutes. I tried a different rom and it keeps saying aborted. I tried doing a restore through clockworkmod and it gets stuck on restoing chache, lost and found. it just sits there and does nothing.
when clockwork opens up it saids E:cant open /cache/recovery/log
can someone help me as to what i should do to get my phone running again?
Click to expand...
Click to collapse
going to have to odin to stock... then start over...

can you send me link to stock?
any way to do it straight from my phone? at work right now and cant install anything on the work computer.

Yes odin and start over. Also you need to be on ext4 to flash Syndicate rom
Sent From My Evo Killer!

how do i change to ext4 ?
what do you mean odin and start over? what exactly is start over?
sorry my knowledge of how this works is very light, thus me screwing up my phone today

gt2776 said:
how do i change to ext4 ?
what do you mean odin and start over? what exactly is start over?
sorry my knowledge of how this works is very light, thus me screwing up my phone today
Click to expand...
Click to collapse
Use this thread and do the steps under : Stock EB13 Deodexed EXT4 + CW 3.0.0.6
http://forum.xda-developers.com/showthread.php?t=853209
After that you can use any EB13 or EC05 ROM that uses EXT4.
You will also want to use odin to update your modem to EC05; you can go here
http://lostandtired.com/android-development and click on the link for EC05 Modem Package (Odin), after you get your ROM up and running.
put the tar in the PDA area and the pit in the pit and update the modem, faster 3G is what most have experienced with the EC05 modem.
Hope that helps, good luck

put your phone in downloading mode and flash back to the stock of your choice.

xda is, AWESOME
thanks to everyone who cared to help

[ROM] Bonsai User Discussion

This post is only for discussing all issues regarding the use of the Bonsai roms. We can talk here about any version from 1.0.0 to x.x.x
Due to some political issues please do not post any links to the Bonsai website! This thread is just for us users and don't expect the developers of Bonsai to ever visit here.
One last thing >
nor

Yes this try to keep this thread open.
Sent From My Evo Killer!

So is there a way to get a 600mhz step in the kernal for bonsai 4.0 last i heard he was going t put it in back in 3.0.1 but still not there. Or is there an easy way to included it in the kernal page file or something that set cpu uses? Also is there a way to get the voodoo color fix or a tweak that works that will make the brightness lower at the lowest setting for 4.0 becase the brightness on this screen is way to brght at night time. I used to have a tweak like this in syndicate rom for 2.1 it was great. Any info would be great thanks guys.
Sent from my SPH-D700 using XDA App

I installed bonsai 4.0.0.1 and it flashed fine, then it tried to restart and got stuck at the samsung boot screen, would not go past that.
So I battery pulled and tried to install another rom (verion 4) and it had an error in CW installing,
Then I tried installing a rom I have used before (epic experience) and CW would not install that one either.
So I used Odin to go back to stock everything and then unlocked it and now I am on a stock rom rooted.
Why do you think it is hanging there? I am scared to flash again as I think it will do the same? But if the forum needs the exact error msg I will install it again as I really want to get this rom working.
Thanks,
Force

forcelite said:
I installed bonsai 4.0.0.1 and it flashed fine, then it tried to restart and got stuck at the samsung boot screen, would not go past that.
So I battery pulled and tried to install another rom (verion 4) and it had an error in CW installing,
Then I tried installing a rom I have used before (epic experience) and CW would not install that one either.
So I used Odin to go back to stock everything and then unlocked it and now I am on a stock rom rooted.
Why do you think it is hanging there? I am scared to flash again as I think it will do the same? But if the forum needs the exact error msg I will install it again as I really want to get this rom working.
Thanks,
Force
Click to expand...
Click to collapse
Were you using CWM 3.0.0.6 or 3.0.0.5 ?
Sent from my SPH-D700 using Tapatalk

Good question as i was just going to as a question about EXT4 and CW.
The rom manger is version 3.0.1.4
however the CW mod flashed is version 3.0.2.4
It only has 2 to choose from in rom manger, 3.0.2.4 or an older 3.0.1.4
Not sure were people are getting these other versions from.
Force
PS I booted into CW and saw it was v2.5.1.0
am I way off?

abrcrmdl23 said:
So is there a way to get a 600mhz step in the kernal for bonsai 4.0 last i heard he was going t put it in back in 3.0.1 but still not there. Or is there an easy way to included it in the kernal page file or something that set cpu uses? Also is there a way to get the voodoo color fix or a tweak that works that will make the brightness lower at the lowest setting for 4.0 becase the brightness on this screen is way to brght at night time. I used to have a tweak like this in syndicate rom for 2.1 it was great. Any info would be great thanks guys.
Click to expand...
Click to collapse
I can't remember what stepping is on the kernel as we have been beta testing 4.0.1 and have been mainly dealing with a new setCPU governor called interactive. Were also still working on the other governor called smartass as well. I think that the stepping goes directly from 400 to 800, but we are always looking to go faster and with better battery life. I'll bug Randy and Mammon about it.
The sound will be Voodoo version 7, but I don't think the Voodoo color fix is going to make it into 4.0.1. Sorry, but we can't do everything...at least not all at the same time.

forcelite said:
I installed bonsai 4.0.0.1 and it flashed fine, then it tried to restart and got stuck at the samsung boot screen, would not go past that.
So I battery pulled and tried to install another rom (verion 4) and it had an error in CW installing,
Then I tried installing a rom I have used before (epic experience) and CW would not install that one either.
So I used Odin to go back to stock everything and then unlocked it and now I am on a stock rom rooted.
Why do you think it is hanging there? I am scared to flash again as I think it will do the same? But if the forum needs the exact error msg I will install it again as I really want to get this rom working.
Thanks,
Force
Click to expand...
Click to collapse
Did I see a similar post on the Bonsai website earlier today? I just want to verify that you were using CWM 3.0.0.6 as anything else will cause problems like that. Also when you get to these kinds of problems you should attempt a second flash of Bonsai before going to the trouble of a ODIN job. A second flash seems to fix a whole variety of odd kind of problems.
As you can imagine with all the beta testing I do I'm always finding ways to corrupt my phone. Some days I have managed to bork it 3-5 times.
I decided to test out today a 4.0.1 install directly from DI18 > CWM 3.0.0.6 > Bonsai 4.0.1 full rom. It went great with no problems at all and running just fine, so far

I think that is my problem, I am using a the CW that came with the one click unroot.
So I guess I need to do this, even if I am already rooted?
http://forum.xda-developers.com/showthread.php?t=897612&highlight=EXT4
PS
I booted into CW and saw it was v2.5.1.0

bluetooth
I could not get bonsai 3.0.1 or 4.0.0 to pair with my bluetooth headset. Tried pairing on an epic with acs 1.1 and paired fine. Anyone else have a pairing problem?

forcelite said:
Good question as i was just going to as a question about EXT4 and CW.
The rom manger is version 3.0.1.4
however the CW mod flashed is version 3.0.2.4
It only has 2 to choose from in rom manger, 3.0.2.4 or an older 3.0.1.4
Not sure were people are getting these other versions from.
Force
PS I booted into CW and saw it was v2.5.1.0
am I way off?
Click to expand...
Click to collapse
Do not use Rom Manager to be installing the beta CWM files. The correct way is with one of the 1 step CWM tools in the development forum. 3.0.2.4 is half-finished and is very difficult even to navigate through the various menu's. I know this because I tried out that CWM version for some grins one day. It will majorly screw your Epic if your not extremely careful. When DI18 was prevalent Rom Manager worked great to root your phone. When we started the move into the Froyo roms Rom Manager quit working and that is why the 1 click then became more prevalent.
Just follow the directions posted all over the place and Bonsai will install just fine and you will be a happy camper.

I am installing it now after updating to CW3 (from CW2.5) . I think it will come out fine now, I am an idiot and didn't realize the original one click root installed an older version of CW.
Thx All,
Force

forcelite said:
I think that is my problem, I am using a the CW that came with the one click unroot.
So I guess I need to do this, even if I am already rooted?
http://forum.xda-developers.com/showthread.php?t=897612&highlight=EXT4
PS
I booted into CW and saw it was v2.5.1.0
Click to expand...
Click to collapse
The linked one is the correct one for Bonsai version 4.x.x.

olddocwhite said:
I could not get bonsai 3.0.1 or 4.0.0 to pair with my bluetooth headset. Tried pairing on an epic with acs 1.1 and paired fine. Anyone else have a pairing problem?
Click to expand...
Click to collapse
Some people do and some don't I do know that Randy has instituted quite a few bluetooth linux upgrades into 4.0.1 rom. Some people are able to clear the data, but the problem usually reappears. Mattalica76 has the link to a more permanent fix to this problem, give him a PM.

Duplicate... Sorry

forcelite said:
I am installing it now after updating to CW3 (from CW2.5) . I think it will come out fine now, I am an idiot and didn't realize the original one click root installed an older version of CW.
Click to expand...
Click to collapse
Don't beat yourself up as we all have been there. It's a process of learning new skills and a new language. Give yourself a pat on the back for getting through this when 98% of the world would have said screw it or not even tried at all.

Actually it didnt boot this time either, it installed the firs ttime fine, then kept booting after samsung in a loop,
So I went into CW3 and tried to flash bonsai 4.0.01 again and it gave me this error. It is long, however I shortened it, I have the whole error photo copied)
Finding package
Opening package
Install update
Assert failed getprop (“ro.product.device)”)
Sph-700
E:error in /SDcard/bonsai……….
(status 7)
Installation aborted

Top Nurse said:
Don't beat yourself up as we all have been there. It's a process of learning new skills and a new language. Give yourself a pat on the back for getting through this when 98% of the world would have said screw it or not even tried at all.
Click to expand...
Click to collapse
Thanks for the support T Nurse,
I loaded the EC05 stock from Odin as I still dont have a grasp on EXT4 file system.
last thing I tried was cw3.0.0.6 and loaded Bonsai and it installed, just hung at samsung screen. might be a corrupt rom file.
1) So after flashing CW3, bonsai is supposed to change the file system over to EXT4 automatically after flashing, correct?
2) will windows 7 be able to read the sd card after it is changed over to ext4 (by bonsai), or will it have 2 partitions, one windows can read fat32 and the other ext4 it cant.

forcelite said:
Thanks for the support T Nurse,
I loaded the EC05 stock from Odin as I still dont have a grasp on EXT4 file system.
last thing I tried was cw3.0.0.6 and loaded Bonsai and it installed, just hung at samsung screen. might be a corrupt rom file.
1) So after flashing CW3, bonsai is supposed to change the file system over to EXT4 automatically after flashing, correct?
2) will windows 7 be able to read the sd card after it is changed over to ext4 (by bonsai), or will it have 2 partitions, one windows can read fat32 and the other ext4 it cant.
Click to expand...
Click to collapse
CWM3 will convert your filesystem to ext4 the first time you boot into it. It won't touch the sdcard so that won't be converted. After CWM is finished with the conversion, do not reboot the phone, you will then flash Bonsai.

forcelite said:
Thanks for the support T Nurse,
I loaded the EC05 stock from Odin as I still dont have a grasp on EXT4 file system.
last thing I tried was cw3.0.0.6 and loaded Bonsai and it installed, just hung at samsung screen. might be a corrupt rom file.
1) So after flashing CW3, bonsai is supposed to change the file system over to EXT4 automatically after flashing, correct?
2) will windows 7 be able to read the sd card after it is changed over to ext4 (by bonsai), or will it have 2 partitions, one windows can read fat32 and the other ext4 it cant.
Click to expand...
Click to collapse
After flashing the boot script of cwm 3.0.0.6 you then have to power off. Then hold down the camera button, vol down, and power keys at the same time and the EXT4 script will automatically start to format your system. Please keep in mind that it is not formatting the SD card, but only the read only memory of the phone.
After you finished a few beers it will be done and will drop you back to cwm. Do not reboot, but flash bonsai. After bonsai is finished then reboot.
Sent from Bonsai 7.0.3

help(resolved)

Hey I just seriously screwed my self over bassicly I tried to get miui to boot from the samsung fascinate however when I installed it in cmr it spassed out then powered of then went to the bootloader and I get a red error message saying can't mount data or something so then I tried to reinstall Eco 3 Odin using Odin and it worked it booted but it says I have zero data on my phone and I can't install anything. I also tried the oneclick soft unbricker but it fails saying adb divers are not installed when they are. I'm doing this on my phones browser witch is the only thing that seems to be working right now I also tried a band restore but I got the same data error message.

Have you tried restoring to DL17 and then re-upgrading to 2.2?

And how about a good old odin flash?
In worst case, I would ask imnuts for the full odin package, or use a fascinate full odin package to get you off your feet, then reflash the modem, and recovery, then wipe In recovery cyan cwm... Then flash ec03
Sent from my SCH-I400 using XDA Premium App

wait wait, is this on a Continuum or Fascinate?

Nuckin said:
wait wait, is this on a Continuum or Fascinate?
Click to expand...
Click to collapse
He is on a Continuum, but you can use a fascinate Odin package to reformat partitions if they get messed up, then just reflash recovery and start fresh if you can get in then... That wasn't a really good thing though to suggest to a newcomer necessarily, so thank you for pointing that out

okay heres what happened firts i wanted to see if i could get the miui rom for the samsung fascinate to boot on the continuum there pretty much the same phone minus the ticker and screen size so i went into clockwork mod and wiped everything then went to install zip from sd card and clicked on the miui rom witch was the process we always used on the hero. then after i clicked on it, it started to install then my screen started shacking and my phone turned off. when i turned it back on it when to the bootloader and a red error message poped up saying
e:cant mount /dev/blockstill(invalid argument
and when i go to recovery it says the same thing when i try to wipe/restore nand it says the same thing. so at that point i powered off and went to download mode and reinstalled eco3 odin using pda mode on odin and it worked then it rebooted and i got to the set up screen and i got 2 force closes daily brefeing and something else i went ahead and skipped all that stuff and it loaded fine after that. however now for some reason it says i have zero system memory so i cant install any apps or save data however it does recognize my sd card but i cant install to sd card. so bassicly the phone functions just no internal memory. at this point i honestly dont know what to do everything on the hero was simple and straight forward and we never ran into these kind of problems. ive also tried to restore my nands and reinstall clockwork mod but still no dice. what i need to do now i guess is get the necessary files to go completely stock and see if that helps. and if someone could point me in the direction to those files i would really aprechiate it. oh and i tried the one click unbricker it sayed success but didnt really do anything.
oh and i know trying to install miui was stupid but i was just wanting to see if it would boot lol.

Download the PIT file in the Development forum, as well as the DL17 Odin package from the FAQ of the EC03 post I made. Flash the DL17 in PDA, with the PIT, and re-partition selected. After that, you should be back on DL17, and can do whatever you want from there.

huzzza!!!
thank god that worked thank yall so much i still cant believe that just happened but restoring the stock odin image worked and all is well. so i guess tommorow i can reroot and restore my nand.
once again thank yall for the help.

[Q] Help a noob, cannot boot after trying to flash stock rom

So I'm pretty desperate and I apologize if similar info was posted somewhere else. I've been researching several hours but couldn't find anything.
I originally installed CM11 and decided to experiment with a different rom TriForce ROM [TouchWiz]. I put the zip file on my SD card and booted into clockworkmod it gave an error of bad zip. I tried different usb port to transfer the zip, downloaded it multiple times with no result. So I decided to try a different rom Stock_Rooted_Deodexed_MF9_Rom.zip. The installation finished but the phone would not boot.
Recently I flashed the stock rom from odin, it finished successfully but still not boot, Galaxy sreen lights up quickly and that's it.

rmngorelov said:
So I'm pretty desperate and I apologize if similar info was posted somewhere else. I've been researching several hours but couldn't find anything.
I originally installed CM11 and decided to experiment with a different rom TriForce ROM [TouchWiz]. I put the zip file on my SD card and booted into clockworkmod it gave an error of bad zip. I tried different usb port to transfer the zip, downloaded it multiple times with no result. So I decided to try a different rom Stock_Rooted_Deodexed_MF9_Rom.zip. The installation finished but the phone would not boot.
Recently I flashed the stock rom from odin, it finished successfully but still not boot, Galaxy sreen lights up quickly and that's it.
Click to expand...
Click to collapse
Restore from nandroid backup. I hope you made one. Try going into recovery do a factory reset and wipe all cache and data and what not and then install a ROM from Odin.

rmngorelov said:
So I'm pretty desperate and I apologize if similar info was posted somewhere else. I've been researching several hours but couldn't find anything.
I originally installed CM11 and decided to experiment with a different rom TriForce ROM [TouchWiz]. I put the zip file on my SD card and booted into clockworkmod it gave an error of bad zip. I tried different usb port to transfer the zip, downloaded it multiple times with no result. So I decided to try a different rom Stock_Rooted_Deodexed_MF9_Rom.zip. The installation finished but the phone would not boot.
Recently I flashed the stock rom from odin, it finished successfully but still not boot, Galaxy sreen lights up quickly and that's it.
Click to expand...
Click to collapse
Make sure you're using roms for your version of your phone. the MF9 bootloader is really old and probably wont install anymore. My phone did this before and I thought I bricked it, but I kid you not I took the battery out and removed the SIM card and rebooted and it booted up just fine. May not work for you, but I suggest you go back to update stock firmware then try again. If you're using the triband model, there's a post around here somewhere with confirmed roms that wont brick your device. I'm currently using the Google Play Edition Stock ROM and it's working GREAT.
Link for new firmware (NG5 Firmware): https://mega.co.nz/#F!0JdRkIZR!AqqKdbvba_Hpg5VrCmrbPw

i7vSa7vi7y said:
Restore from nandroid backup. I hope you made one. Try going into recovery do a factory reset and wipe all cache and data and what not and then install a ROM from Odin.
Click to expand...
Click to collapse
I restored to this stock ROM before and everything worked well. Currently I can't boot into recovery, Samsung flashes once and that's it, that's why I'm desperate the only thing I can do is boot in to download mode for odin.

silentdeath631 said:
Make sure you're using roms for your version of your phone. the MF9 bootloader is really old and probably wont install anymore. My phone did this before and I thought I bricked it, but I kid you not I took the battery out and removed the SIM card and rebooted and it booted up just fine. May not work for you, but I suggest you go back to update stock firmware then try again. If you're using the triband model, there's a post around here somewhere with confirmed roms that wont brick your device. I'm currently using the Google Play Edition Stock ROM and it's working GREAT.
Link for new firmware (NG5 Firmware):
Click to expand...
Click to collapse
Does it matter that I can't get into recovery to clear the cache first before trying new roms?

silentdeath631 said:
Make sure you're using roms for your version of your phone. the MF9 bootloader is really old and probably wont install anymore. My phone did this before and I thought I bricked it, but I kid you not I took the battery out and removed the SIM card and rebooted and it booted up just fine. May not work for you, but I suggest you go back to update stock firmware then try again. If you're using the triband model, there's a post around here somewhere with confirmed roms that wont brick your device. I'm currently using the Google Play Edition Stock ROM and it's working GREAT.
Link for new firmware (NG5 Firmware):
Click to expand...
Click to collapse
Maybe I'm doing something foolish but every time I try to download files from the link you gave I get a decryption error so I can't download them zip or original.

rmngorelov said:
I restored to this stock ROM before and everything worked well. Currently I can't boot into recovery, Samsung flashes once and that's it, that's why I'm desperate the only thing I can do is boot in to download mode for odin.
Click to expand...
Click to collapse
Just hold home power and volume up. Right when you see text at the top left let go. You have to have the right timing

i7vSa7vi7y said:
Just hold home power and volume up. Right when you see text at the top left let go. You have to have the right timing
Click to expand...
Click to collapse
After almost eight hours of troubleshooting I finally got it to work.
I've tried flashing clockworkmod several times to see if I could get into recovery with no result so I gave up on that and I flashed the newest stock rom I could find L720VPUFNG2_L720SPTFNG2_SPR and it was still not booting. Than I thought maybe twerp would make a difference and god almighty it finally booted! I felt as if I gave birth to a child after eight hours of labor!
Now I'm extremely paranoid about touching anything because it took me forever to do this. Does anyone know why flashing twerp would make such a difference? I know this sort of stuff can get extremely complicated but I'd like to try to understand.
I hope my foolish agony contributed to this community if not in any other way except by the comedic relief caused by my ignorance.

rmngorelov said:
After almost eight hours of troubleshooting I finally got it to work.
I've tried flashing clockworkmod several times to see if I could get into recovery with no result so I gave up on that and I flashed the newest stock rom I could find L720VPUFNG2_L720SPTFNG2_SPR and it was still not booting. Than I thought maybe twerp would make a difference and god almighty it finally booted! I felt as if I gave birth to a child after eight hours of labor!
Now I'm extremely paranoid about touching anything because it took me forever to do this. Does anyone know why flashing twerp would make such a difference? I know this sort of stuff can get extremely complicated but I'd like to try to understand.
I hope my foolish agony contributed to this community if not in any other way except by the comedic relief caused by my ignorance.
Click to expand...
Click to collapse
Depends what recovery you had and what version. I personally like Philz touch recovery but TWRP is good. Now wipe and flash a ROM my friend or restore a backup

rmngorelov said:
After almost eight hours of troubleshooting I finally got it to work.
I've tried flashing clockworkmod several times to see if I could get into recovery with no result so I gave up on that and I flashed the newest stock rom I could find L720VPUFNG2_L720SPTFNG2_SPR and it was still not booting. Than I thought maybe twerp would make a difference and god almighty it finally booted! I felt as if I gave birth to a child after eight hours of labor!
Now I'm extremely paranoid about touching anything because it took me forever to do this. Does anyone know why flashing twerp would make such a difference? I know this sort of stuff can get extremely complicated but I'd like to try to understand.
I hope my foolish agony contributed to this community if not in any other way except by the comedic relief caused by my ignorance.
Click to expand...
Click to collapse
im having similar issues. which version of TWRP worked for you?
thank you

fearthemarchx said:
im having similar issues. which version of TWRP worked for you?
thank you
Click to expand...
Click to collapse
I recommend flashing the newest one here using odin
http://teamw.in/project/twrp2
Then once you are able to boot into recovery go to wipe and perform both factory reset and format data. Then install whatever rom you like, I used Sprint Galaxy S4 SPH-L720 VPUFNAE (Androdi 4.4.2) found here
http://galaxys4root.com/galaxy-s4-stock-firmware/ (or maybe find a newer stock rom if this one gives you errors)
Just copy the zip file to the phone, boot into twrp, do wipe factory reset again, select install then select the zip in whatever directory and you should be good to go. Make sure you do a back up in twrp once you get the phone to boot so you can always revert to stock.
I hope I was thorough enough that some of the information was useful. Let me know if you need any more help.

only certain recoveries will stick. ive tried the most recent twrp, with no luck. only a few versions of philztouch work.
Sent from my LGL34C using XDA Free mobile app

fearthemarchx said:
only certain recoveries will stick. ive tried the most recent twrp, with no luck. only a few versions of philztouch work.
Sent from my LGL34C using XDA Free mobile app
Click to expand...
Click to collapse
Format with philztouch that works then try flashing a new stock rom with odin. That should bring everything back to stock including the recovery.

ive tried. when i flash rom via odin i only get a blue "recovery booting" at the top of boot screen. even when i only power on, not into recovery. im going to attempt to flash rom provided in previous post via philz.
Sent from my LGL34C using XDA Free mobile app

fearthemarchx said:
ive tried. when i flash rom via odin i only get a blue "recovery booting" at the top of boot screen. even when i only power on, not into recovery. im going to attempt to flash rom provided in previous post via philz.
Sent from my LGL34C using XDA Free mobile app
Click to expand...
Click to collapse
You're in download mode when you flash from odin right? If you your getting an error flashing, try a different stock rom after reformating/resetting to factory (it's crucial to clear the cache before trying a different rom). I had to try a few roms before I found one that worked.