[Q] Necessity for Flashing ? - Galaxy 3 General

So many official Froyo firmwares have now been released, each having its own pros & cons. With Kies being a pain, most of us are now using Odin to flash Froyo.
What I wanted to ask is that do I need to flash a region specific BASE ROM for each & every Official Froyo release?
E.g. do I have to be on DDJG6 to flash DDJP2? (Although the former isnt exactly a base ROM for the latter -more a precursor, but I hope you get the point)

No it is not the same for every rom
Jpm can be flashed directly but jp2 requires to flash jg6 first!

Yeah,
Choose the best rom for your region or other region that worked on SG3
For example : i used JPM from EUROPE region
cdesai it's right, some rom required old rom flashed before
either your phone not working
Just simply flash it using custom ROM and it's better than any based ROM

Tianhe said:
So many official Froyo firmwares have now been released, each having its own pros & cons. With Kies being a pain, most of us are now using Odin to flash Froyo.
What I wanted to ask is that do I need to flash a region specific BASE ROM for each & every Official Froyo release?
E.g. do I have to be on DDJG6 to flash DDJP2? (Although the former isnt exactly a base ROM for the latter -more a precursor, but I hope you get the point)
Click to expand...
Click to collapse
Yup if u want to flash using Kies then DDJG6 is required as it was the official firmware for Galaxy 3 GT-I5801

Tianhe said:
So many official Froyo firmwares have now been released, each having its own pros & cons. With Kies being a pain, most of us are now using Odin to flash Froyo.
What I wanted to ask is that do I need to flash a region specific BASE ROM for each & every Official Froyo release?
E.g. do I have to be on DDJG6 to flash DDJP2? (Although the former isnt exactly a base ROM for the latter -more a precursor, but I hope you get the point)
Click to expand...
Click to collapse
hi
if u want to flash DDJP2 via kies or odin u need to flash DDJG6 or u will get into a boot loop based on my experience flash DDJP2 via odin & kies
and if u want to root it latter on use superoneclick 1.7.0 it worked for me

Thank you for your responses. Based on my experience, i shall narrate below the sequence of flashing my Galaxy 3 through various ROMs (Please note that i used Odin)
1) Bought my Galaxy 3 with stock DDJG6 (Eclair) pre-installed.
2) Tried updating via Kies to DDJP2 but failed due to poor connectivity (timed out). Flashed through Odin successfully. Rooted with SuperoneClick (Rage against the cage). Deleted stock Swype apk & other relevant files with Super Manager and installed Swype beta.
3) Flashed XWJPF directly over it.
4) Flashed Indroid V3 custom no lagfix directly.
My phone is currently on Indroid and running OK(touchwood !). Some of the precautions that i took before flashing was - backed up data, backed up efs folder, deleted bootloader & sbl.bin files from every firmware with IZArc. Also i hard reset the phone before & after flashing. Phone must have ample battery charge. In case of a bootloop (which happened a day after a flashing DDJP2 i flashed again)
The only problem which i have faced since my first flash to DDJP2 & which persists till now even after flashing of multiple ROMs is that some of music files are not played on any music player (stock, custom or downloaded from market). Notably all of those files are .m4a format although some of the other .m4a files do play. A case of missing codecs which doesnt allow playing of files with certain bitrates? I suspect it has got something to do with the sbl.bin file although that's pure guesswork

Related

Updating the Galaxy Tab to the latest firmware !

Hey guys
I'm running the P1000JXJJ1, FroYo JPJJ2 firmware on my Tab, and samfirmware states P1000JVJL1 is the latest one !
so I was advised NOT to use KIES, and ODIN was better !!
My tab is rooted with OCLF set, Just a quick question, Odin will delete all my data and also I believe that I'd have to re-ROOT the device right?
another question is since I didn't have market out of the box, the product sales code has been changed to XSG.
thanks a lot guys in advance
Cheers
Jackie
if u use oclf, undo oclf b4 update firmware, kies or odin works fine for me, i'll only use odin when i screw up with my tab
and will I have to re root the device and also will ODIN delete all my data?
Hi,
searching for something else I accidentily found this thread.
Maybe my experince might be of any interest: got the galaxy tab 3 days ago, installed KIES and instantly got a message to update the firmware to Froyo JK5. I followed the suggestion to save my data which I regret later, because it took very long (had already copied a lot of videos to the internal sd) and couldn´t stop it. To cut it short:
the update was successful and nothing deleted, just everything in place. Also synchronized Outlook contacts, though at 96% it got stuck - waited a few minutes, then broke up and all contacts had been transferred fine.
(don´t know, if firmware is different for other countries...)
Odin will not delete your data if you did not choose to repartition, no need to use pit file to repartition if you are just upgrading fw from the same region..safest is still via KIES
To correct some mis-information from above. Flashing with Odin can delete your data, it depends on what components are included in the image you flash. If you flash an official ROM with Kies you should not loose your data but there is always a risk of an issue occurring during any flash that could lead to data loss. Unless you flash a pre-rooted custom ROM you will loose root and SU during a flash. These can be re-applied easily to the SGT using the Super One-Click method.
Redardless of what flashing method you use, if you use RyanZA's OCLF you must undo the lag fix before you flash, otherwise you will certainly loose data and possibly end up with a corrupt system that won't boot (I had first hand experience of this early on in my flashing days with my SGS!). You shouldn't really need to apply a lagfix to the SGT as it doesn't seem to suffer from the same lag as the SGS.
Finally, flashing with Odin can lead to product code being changed, especially if the ROM you flash isn't intended for the normal product code of your device. There are various ways to restore your poduct code, look in the Samsung Galaxy S forums for suggestions on how to do this as the basic construction of the ROMs is very similar between the two devices from that point of view. Also, be aware that people with SGS devices have reported loosing their IMEI while flashing with Odin. If this happens you will end up with a WiFi only device unless you backed up your /efs folder before you flashed. There's lots of info in the SGS forums about this and it's worth a read if you are new to flashing. I haven't heard of anyone with a SGT loosing their IMEI yet but it's worth taking precautions.
Happy flashing folks!!
thanks a bunch guys, I'm now running the latest version !!
was just trying to install the latest gingerbread theme from the forums !! will let you all know how that went
hi guyz,..
im from malaysia and currently using galaxy S and galaxy sl for my wife (not tabs) but i've been request by my brother who owned the galaxy tabs to upgrade it since i had some knowledge..
currently his tabs running on 2.2 stock asia version.and i wanted to flash the latest version 2.3.3 europe edition since i saw many custom rom on it..i've download the latest firmware that is P1000DXJPE ## via samfirmware.com and could not find any pit,csc and modem file..
my question,
1. am i missing something here?
2. is it possible to flash without pit,csc and modem?
3. i know how to flash the file using pda since i've done it with my SGSL but before that i need to flash another old version firmware to used it.is it the same with galaxy tabs?
azamnecrone said:
hi guyz,..
im from malaysia and currently using galaxy S and galaxy sl for my wife (not tabs) but i've been request by my brother who owned the galaxy tabs to upgrade it since i had some knowledge..
currently his tabs running on 2.2 stock asia version.and i wanted to flash the latest version 2.3.3 europe edition since i saw many custom rom on it..i've download the latest firmware that is P1000DXJPE ## via samfirmware.com and could not find any pit,csc and modem file..
my question,
1. am i missing something here?
2. is it possible to flash without pit,csc and modem?
3. i know how to flash the file using pda since i've done it with my SGSL but before that i need to flash another old version firmware to used it.is it the same with galaxy tabs?
Click to expand...
Click to collapse
Go to the Android Development section.
Look up Overcome and BOCA for the Galaxy Tab. Both a great however I prefer BOCA. The current release is 2.3.4 but 2.3.7 is in the works.
If you follow the instructions for BOCA you will have a GTab that feels like it was newly born again.
boxhead72 said:
Go to the Android Development section.
Look up Overcome and BOCA for the Galaxy Tab. Both a great however I prefer BOCA. The current release is 2.3.4 but 2.3.7 is in the works.
If you follow the instructions for BOCA you will have a GTab that feels like it was newly born again.
Click to expand...
Click to collapse
thanks dude!
so i dont need to flash stock gingerbread 2.3.3 to used this custom rom?a bit confuse here...
boxhead72 said:
Go to the Android Development section.
Look up Overcome and BOCA for the Galaxy Tab. Both a great however I prefer BOCA. The current release is 2.3.4 but 2.3.7 is in the works.
If you follow the instructions for BOCA you will have a GTab that feels like it was newly born again.
Click to expand...
Click to collapse
Yes. Follow the instructions on the magrathea site or overcome
Use overcome instructions to instal stock GB 5. It tells you the pit and modem to use for your tab.
Then install the overcome kernel and reboot. It will root the tab and format the storage.
Then you install the Boca zip over the overcome kernel.
If you just want overcomes Rom follow their instructions. They make it simple
Sent from my GT-P1000 using XDA App
is that all??hmm,
will try donload all the files 1st,then i will try
thanks guyz for da info..
so i dont need to flash stock rom like i always do with my SGS before installing any custom rom?

[Q] XXJG7 Firmware

Hi Guys,
Ive searched the forum, to no avail...
I would like to flash my Apollo with FroYo, but for safety's sake im trying to find a copy of my original firmware so I can flash it back and use KIES if needed.
If I type in *#1234# I get:
PDA I5800XXJG7
Phone I5800XXJG3
CSC I5800XXJG5
Does any kind person have the relevant files handy for upload please?
Also, If I flash a new firmware should they all match the original (ie the I5800XX part).
Thanks for your help
I posted the same question a week ago. I didn't get a straight answer. I had the same firmware before i flashed to XXJPM. Your firmware is XXJG7, but I didn't find it on samfirmware. I found XWJG7, but I think that is not the same, because there is xxjpf and xwjpf - the first one being older. To update via kies when the official update comes u need an official firmware, XXJG7 is official since u got it with your phone, but u cant find it, can you? So you need any official firmware, but i don't know witch are official except XXJG7... Anyway don't bother with this, you can flash froyo without backup, i did it and nothing went wrong but be cautius and folow the steps closly and when the official update comes it will be avaliable to flash via odin. until then flash any non official froyo
I have this rom and am uploading it now its I5800XXJG3 - csc xxjg5 - phone xxjg5 - pda xxjg7 will post a link soon
here you go
megaupload.com/?d=OYHZW0WX
Thanks
I see the numbers are slightly different, does it matter?
I have also read that flashing the bootloader can cause hard-brick issues, is it better not to flash the bootloader?
i did not flash the bootloader just to be on the safe side, not sure what the cl447760 & cl460190 mean all i tell you is kies see's this as the latest firmware for my phone the uk .
i got the phone three weeks aga at the carphone warehouse it is unbranded and unlocked
Thanks again for your help. I have now upgraded mine to the standard XXJPM FroYo with ODIN. Just out of interest, is there a way I could have got the old firmware off my phone into files like you uploaded?
i think you can dd them to the sd card but not sure how to do it , i googled for ages to find my that firmware on some random site because i did not like froyo after i flashed it
ive gone back to 2.1 until i can find a fix for icons not staying on the home screen from apps installed on the sd card after a reboot. other than that i was pleased with it.

[REQ] Stock kernel file

Is it possible for someone to upload stock kernel file for 2.2.1 XXJPY (kernel version is 2.6.32.9 [email protected] #1). Version that is flashable via odin, not cwm version.
I am about to flash my kernel with custom one, but would like to have stock kernel near me, just in case that something goes wrong...
Subquestion is:
is it even possible to reflash to stock kernel via odin once you fot custom one (speedmode to be precise)? I think i read somewhere on forum that it is not entirely possible. Does someone have any expirience with this?
Samfirmware (http://www.samfirmware.com/WEBPROTECT-i9000.htm) has all stock firmwares.
Yes of course you can flash back to stock, you just need to make sure that lagfixes are disabled if you enabled one.
But honestly, I'm 100% sure you won't go back to stock after flashing a custom kernel or rom, it's just that much better.
koflem said:
Samfirmware (http://www.samfirmware.com/WEBPROTECT-i9000.htm) has all stock firmwares.
Yes of course you can flash back to stock, you just need to make sure that lagfixes are disabled if you enabled one.
But honestly, I'm 100% sure you won't go back to stock after flashing a custom kernel or rom, it's just that much better.
Click to expand...
Click to collapse
Thank you very much.
But, as I can see, on this page there are whole roms to flash, I wanted only kernel files. Could kernel be downloaded somewhere?
I'm on stock rom 2.2.1 with CF-root kernel.
Haven't seen a stock only-kernel when I searched for it recently on this forum.
I decided now to download the full stock rom from samfirmware instead which I can go back to in case Kies won't allow me to update to Gingerbread. I figured there's no big difference whether I flash a ROM (which includes the kernel) or just the kernel, the effort is the same.
I just learned that returning to stock ROM (kernel) will be little more difficult for me because my phone is T-mobile branded!
If I flash to a stock firmware does that mean kies will then recognise my firmware as offcial so I can download new updates through it. Thanks
warfighter172 said:
If I flash to a stock firmware does that mean kies will then recognise my firmware as offcial so I can download new updates through it. Thanks
Click to expand...
Click to collapse
You can always use SpoofFW to flash to your original firmware
warfighter172 said:
If I flash to a stock firmware does that mean kies will then recognise my firmware as offcial so I can download new updates through it. Thanks
Click to expand...
Click to collapse
No as its not the firmware that came with the phone nor its Kies update .
As post above only method once you use Odin is either a backed up copy of original firmware and yes a few backed up or spoof fw .
jje
Thanks for your help what do you mean by 'spoof' fw
http://www.appbrain.com/app/spooffw/com.johnan.spooffw
jje
JJEgan said:
http://www.appbrain.com/app/spooffw/com.johnan.spooffw
jje
Click to expand...
Click to collapse
Ok, this is my real problem. JJE might know solution to it...
Before i start flashing my kernel, ROM etc... I would like insurance that if in a couple of months something dies in my SGS, like speaker or something, I can go to repair shop and have guarantiee.
For that I would have to reverse all changes to virginly clean T-mobile branded ROM.
As I understand, to do that i would have to flash it via Odin with 3 files (PDA, PHONE and CSC).
Currently, when I type *#1234# in phone I get:
PDA - I9000BOJS5
PHONE - I9000XXJPY
CSC - I9000GCROJS4
so I presume that are the files version that must be flashed in Odin.
I managed to find all files except CSC code (for Croatian T-mobile 2.2.1 ROM). Couldn't find it anywhere.
Is it possible to put some Multi CSC and then later change it to right one ( I9000GCROJS4) with spooffw?
Or there is another way to find/backup/extract CSC from my current configuration.
Or another way to get back to stock branded ROM if anything goes wrong?
I can do nandroid backup because I cant get to CWM because i dont have 2e recovery (that is one of reasons I want to flash to another kernel, to get 3e and CWM).
Please help!

[Q] Upgrade from Eclair to Froyo - is it safe?

So, my wife has Eclair on her T-mobile branded phone. Is it safe to upgrade to Froyo via Odin since mobile is branded?
I have Galaxy S and I am familiar with upgrading and custom ROMs via Odin, I just want to know is it simple to upgrade it via Odin as on mine Galaxy S? I will download the latest Froyo from samfirmware page.
Or should I somehow debrand my wife's phone before upgrade?
Thanks.
No problem to flash it via Odin, branded/unbranded doesn't matter.
You can even choose between branded and unbranded ROMs if you want.^^
If you still need information about Odin (in combination with the SG3) you can find everything in the development-section.
Thank you for your answer. Regarding Odin it is pretty much clear. Similar as for mine Galaxy S but with different files and different Odin version.
It's save...
But becarefull, because the latest rom from samfimware it has boot.img problem. it will cause your phone "hard brick"
Just see it in developer selection for save flash rom
Flash a firmware from here (for safe flash): http://forum.xda-developers.com/showthread.php?t=1063940

Would This Work ("Workaround" to Receive Latest Kies Updates Where Not Available)?

Would This Work ("Workaround" to Receive Latest Kies Updates Where Not Available)?
Hey everyone,
So, I have a Galaxy S2 on Virgin Mobile Canada, and in Canada, the latest firmware/kernel was KG2, and we all know that KG2 is slightly old, compared to KH3 (or higher, I'm not sure atm) in Europe.
Now, we all know that Europe is the first to receive OFFICIAL updates to the latest firmware/kernel via Samsung Kies.
What I'm thinking is that I can change the "Region Code" on my device, to 'trick' Kies into thinking I'm located in Europe, and then it will deliver to me the latest OFFICIAL firmware/kernel update. After updating, I can install the stock KG2 modem for Bell/Virgin (if you're located in a different country, just use your local modem/baseband) via Odin. Then I can use CF-Root Kernel to root my device, then revert back to stock.
This way, I have a Galaxy S2 with the latest official firmware/kernel, a modem that still works perfectly with my provider/network, and root, with no yellow triangle!
However, I don't wish to mess anything up, so I haven't tried this yet. Do you guys think that it can work, and is a viable option instead of waiting for official updates to come to my region? Can anyone maybe try this and post their results/findings (or maybe someone has already done this?)? Also, would all apps like "Samsung Apps" and the Android Market still work properly, as in for my region? What other problems could I possibly run into? I'm mostly concerned about the Market...
I got my S2 free ! from Orange UK 5 days ago, love it, what an upgrade from my 18 months used X10 .
Anyway they do what you want with the X10 so I suppose it can be done with S2 though I dont know for sure.
I used to follow the X10 forum (here now) though I left my X10 stock and was happy with it but I rooted this the 3rd day already and unlocked the simlock ready for my Holiday next week = super low cost local data (50p uk per gig).
What a great device this is !!
Or you can just tell kies to stuff it and flash roms via odin.
Once you update with kies, changing the modem will mean you wont automatically get new updates anyway, as it wont recognise the firmware combination.
veyka said:
Or you can just tell kies to stuff it and flash roms via odin.
Once you update with kies, changing the modem will mean you wont automatically get new updates anyway, as it wont recognise the firmware combination.
Click to expand...
Click to collapse
So, you're saying that using Odin would be much easier?
Also, I've heard that the KH3 modem works really well with Bell/Virgin, but incase I need to revert, I can always use Odin to flash the KG2 modem while keeping my KH3 kernel/firmware, right?
So, if I just download the Europe KH3 firmware from "http://samfirmware.com", then I just use Odin to flash it, and I'm done? Will it wipe any of my data? Also, would the European firmware work in Canada?
amandureja said:
So, you're saying that using Odin would be much easier?
Also, I've heard that the KH3 modem works really well with Bell/Virgin, but incase I need to revert, I can always use Odin to flash the KG2 modem while keeping my KH3 kernel/firmware, right?
So, if I just download the Europe KH3 firmware from "http://samfirmware.com", then I just use Odin to flash it, and I'm done? Will it wipe any of my data? Also, would the European firmware work in Canada?
Click to expand...
Click to collapse
If you have the i9100T You need to use one of the T stock modems or your wifi/bluetooth/data wont work very well/at all (so i hear), but yes you can mix and match rom+kernel and modems from different releases without any problems.
As far as getting a rom, grab a non wipe version from this thread and you should keep everything.
veyka said:
If you have the i9100T You need to use one of the T stock modems or your wifi/bluetooth/data wont work very well/at all (so i hear), but yes you can mix and match rom+kernel and modems from different releases without any problems.
As far as getting a rom, grab a non wipe version from this thread and you should keep everything.
Click to expand...
Click to collapse
I have the i9100M. I have heard great reports of the KH3 modem with it, so I'm pretty confident it'll work fine.
So, I just download the KH3 files from that link, and then flash via Odin?
Is it a must to flash the CSC as well, or can I leave that out?
amandureja said:
I have the i9100M. I have heard great reports of the KH3 modem with it, so I'm pretty confident it'll work fine.
So, I just download the KH3 files from that link, and then flash via Odin?
Is it a must to flash the CSC as well, or can I leave that out?
Click to expand...
Click to collapse
The M is fine to use any modem/rom, it will change the model code to just i9100 though, might be changed back by flashing the stock firmware though.
Yes flash via odin.
No you dont need to flash the CSC unless you get problems, but you might as well, the worst that can happen is that you need to manually enter your APN settings.

Categories

Resources