Related
Hi,
after having several missed calls going straight to my answering machine on my new HTC Hero. I was getting a bit paranoiac, so I've decided to test in/out calls.
Basically, 90 of my incoming calls were going straight to my answering machine. Out-call were about 30% KO
After several tests, to make sure there was a problem, I've decided to request for support from HTC.
Support told me that I should shut the 3g connection every time I would want to receive a call .
So I tried and Bingo, if 3G is activated, I get 10% of the calls, if I deactivate it 90% success.
So you'll say, I should be happy? Right? Wrong!
The main use of that kind of phone is to have a data integration, otherwise I would have kept my old nokia from 10 years ago..
Here basically, if I follow HTC idea, I should keep the 3g closed, sometime, I should switch it on to get my mails, thanks to the non true push capacities (ok this one is not htc) then wait for the sync, maybe force it , get my mails, and then, shut 3g back and pray that no Über important call would have been done.
Well that plain sucks!
Never had such a thing on my previous Data friendly mobiles, why should I accept it on the Hero?
If someone have come across this bug, cause it is a bug, how did he/she managed to fix it?
Thanks
works fine on mine....i suggest you are on a ****e network, or on only 2G where you are. that's what usually causes this.
I guess they suggested this because it sounds like your network hasn't figured out how to route calls properly on their network when data is active, and they dump it straight to voicemail when there is a data connection active.
not the phone's fault, the phone won't even know that the call has been missed, the network simply does not route the call through and sends it to voicemail instead.
i had this on O2 a while ago. went to t-mobile (who knew how to set up their network properly for data) and never had this issue since when i am on 3G coverage. if i'm on 2G signal and have active data then yes, i miss calls. but that's how 2G networks operate.
it's truly shocking how many networks out there have absolutely no idea how to set up their networks properly for data!
Well I wish it would be that, my signal goes from -63 dbm 25 asu(80% of the time) to -81 dbm 16 asu.
Just after my post, I called one of my friend working in carrier terminal validation.
What he told me was, 2 options:
- Same bug was on the htc cruise, bug got corrected after a fw update.
- Some of my carrier radio are buggy and 3g goes over gsm.(SFR/VOdaphone France)
I bet for the first option since I had the problem in various places since I didn't want to ask support for nothing and get busted for a " feeling and not facts" (did the test in 3 differend location 80 tests in total(I used to be a tester....).
I will update the topic if I get news about it
nmuncer said:
!
Never had such a thing on my previous Data friendly mobiles, why should I accept it on the Hero?
If someone have come across this bug, cause it is a bug, how did he/she managed to fix it?
Thanks
Click to expand...
Click to collapse
You shouldn't accept it - but most people don't have this issue!
It's unlikely to be a "bug" per se, because otherwise it would be endemic behaviour, so it's either:
1. Your physical device (get it changed!)
2. Your network.
In addition, just an FYI in case you've got the new Sprint Hero, but most CDMA networks (including Sprint) do not support simultaneous voice and data. I've no idea what happens in practice on Sprint, but I'd imagine if you were actively using data your voice calls would get diverted to voicemail unless Sprint automatically suspends data when a voice call is pending.
Regards,
Dave
You're on SFR?
OUCH!!!!
Sounds like you have a nice strong signal, but is it 2G or 3G? (do you see a G, E 3G or H at the top of the screen?
if you see G or E, it's cos you're on 2G, If you get 3G or H, it's on 3G.
And yes, there were a few issues with the P3300 and the cruise, but they were mainly on Bouygues, not so much on SFR.
There's nothing known of on the hero, and as SFR sell the Magic, i would have thought they would have ironed out any issues already...
Hi,
I'm mostly in HSDPA or 3G.
I still have contacts with people at SFR (used to work there till recently) they might share a bit of info.
Idk if yours is CDMA or the GSM one but on mine (CDMA) under the mobile network settings, I have the option to switch the mode of operation to ether Hybrid, EVDO only, and 1X only. Now, I know how Sprint's network works, not sure if it's the same for any other networks but if I set it to Evdo only (3g) I'll miss all my calls because Sprint does voice over 1X. Hybrid mode does EVDO when you're using data and switches to 1X when you're doing voice/sms.
rhedgehog said:
if you see G or E, it's cos you're on 2G, If you get 3G or H, it's on 3G.
...
Click to expand...
Click to collapse
Regarding this and your suggestion that 2g and data will result in missed calls, Can you suggest how to avoid this happening? I live and work in the country and only have 2g, so have found quite often people have mentioned my phone not even ringing- straight to answer phone. This explains it.
Nice to know, but annoying if I can't solve it- I run a business and my phone is very important.
Cheers,
ajones7279 said:
Idk if yours is CDMA or the GSM one but on mine (CDMA) under the mobile network settings, I have the option to switch the mode of operation to ether Hybrid, EVDO only, and 1X only. Now, I know how Sprint's network works, not sure if it's the same for any other networks but if I set it to Evdo only (3g) I'll miss all my calls because Sprint does voice over 1X. Hybrid mode does EVDO when you're using data and switches to 1X when you're doing voice/sms.
Click to expand...
Click to collapse
i have sprint as well and when someone calls you when youre running hybrid, you should not miss calls. you will get disconnected from the internet when someone is calling though
ajones7279 said:
Idk if yours is CDMA or the GSM one but on mine (CDMA) under the mobile network settings, I have the option to switch the mode of operation to ether Hybrid, EVDO only, and 1X only. Now, I know how Sprint's network works, not sure if it's the same for any other networks but if I set it to Evdo only (3g) I'll miss all my calls because Sprint does voice over 1X. Hybrid mode does EVDO when you're using data and switches to 1X when you're doing voice/sms.
Click to expand...
Click to collapse
Hi, I'm on hybrid
that is what i hate about hero, it is really great except for the fact that it switches from 2g to 3g without notice. i want it to be permanently stuck in 3g for faster downloads and mms, but when it uses 2g, i cant send and receive mms and surfing the web is slow as heck! im still looking for an app that would permanently put the device in 3g just like with winmo it which you can use wcdma ONLY.
cheers!
If you use AnyCut, you can create a short cut by selecting:
New Shortcut->Activity->Phone info
This will create a shortcut on your homescreen which beings up a hidden "engineering" screen on which you'll find an drop down for "Set preferred network type" where you can select WCDMA only.
Regards,
Dave
alternatively, open the phone app
dial *#*#4636#*#* and select phone info
scroll down and set it to WCDMA only.
does the same thing but saves installing an app.
rhedgehog said:
alternatively, open the phone app
dial *#*#4636#*#* and select phone info
scroll down and set it to WCDMA only.
does the same thing but saves installing an app.
Click to expand...
Click to collapse
holy monkey! im going to try this!!! do i have to di it everytime i turn the phone of or is it permanent?
orouborus said:
that is what i hate about hero, it is really great except for the fact that it switches from 2g to 3g without notice. i want it to be permanently stuck in 3g for faster downloads and mms, but when it uses 2g, i cant send and receive mms and surfing the web is slow as heck! im still looking for an app that would permanently put the device in 3g just like with winmo it which you can use wcdma ONLY.
cheers!
Click to expand...
Click to collapse
That is not specific to the Hero. The fact is, every carrier's 2G network has better coverage than their 3G network. When the phone cannot detect strong enough 3G signal, it jumps back to 2G network. The idea is that slow data transmission is better than no data transmission at all. Many smartphones have the option to lock the mobile network to 2G only. One advantage is that it gets better reception, and another advantage is longer battery life (the 3G chip eats battery much faster than 2G).
If you instead lock the phone to its 3G network. The first thing you will notice is that battery life is significantly shorter. And chance is that you may be getting very spotty reception, because you are not allowing to phone to switch to 2G when it gets no 3G signal. When there is no 3G signal, forcing the phone to "3G only" mode won't give you faster download, it gives you no download.
tsekh501 said:
That is not specific to the Hero. The fact is, every carrier's 2G network has better coverage than their 3G network. When the phone cannot detect strong enough 3G signal, it jumps back to 2G network. The idea is that slow data transmission is better than no data transmission at all. Many smartphones have the option to lock the mobile network to 2G only. One advantage is that it gets better reception, and another advantage is longer battery life (the 3G chip eats battery much faster than 2G).
If you instead lock the phone to its 3G network. The first thing you will notice is that battery life is significantly shorter. And chance is that you may be getting very spotty reception, because you are not allowing to phone to switch to 2G when it gets no 3G signal. When there is no 3G signal, forcing the phone to "3G only" mode won't give you faster download, it gives you no download.
Click to expand...
Click to collapse
true true. i usually charge my phone everynight though. problem that i have with 2g is that i cant send and recieve mms and yeah data connection is slow. in our place 3g signal is ok. i also lock my topaz for wcdma only. but it is ok that it switches to 2g in low signal areas.
Thanks!
You actually use mms?
Wow, they do exist.
barryallott said:
You actually use mms?
Wow, they do exist.
Click to expand...
Click to collapse
yeah... mms is great. i use it to send items that i wish to purchase etc.
What NOM1 Networks are there in the UK? I only get 2g in my area (booo) and could do with an operator that works right. T-Mobile forums suggest they still have an issue
Hi
I've checked it with Hero running in PlusGSM in Poland.
Regardless if I select 2G/3G or even "WCDMA preffered/GSM Only/WCDMA only" setting the phone is not available for incoming voice calls during data transfer. Every time when I start internet connection (example: SSH session) I'm not available for incoming calls. At this site I do have both strong 2G and strong 3G networks.
I would like to mention that a few days ago I've swapped Samsung SGH-i600 (WinMo 6.0) for HTC Hero - so I'm using the same SIM card in the same network and the same place. SHG-I600 was able to perform both data transfer (on 2G) and voice (on 3G) on the same time. HTC Hero is not...
I wonder if this is 'feature by design' or a bug in software?
So, i have bugged folks on this forum about getting 3G to work on other carriers, and it turns out - it does work! At first i found out my settings were set to GSM only, but now i also found this weird inconsistency possibly a bug.
If i have Data Off after using 3G or GPRS for some time, when i turn it back on, phone would not connect to data service. After enabling it will simply time out.
I found that if i switch from GSM to WCDMA, and than back, 3G network would connect and work.
I don't know if it's specifically my phone, or a bug, so i'm just throwing it out there.
dialbat said:
So, i have bugged folks on this forum about getting 3G to work on other carriers, and it turns out - it does work! At first i found out my settings were set to GSM only, but now i also found this weird inconsistency possibly a bug.
If i have Data Off after using 3G or GPRS for some time, when i turn it back on, phone would not connect to data service. After enabling it will simply time out.
I found that if i switch from GSM to WCDMA, and than back, 3G network would connect and work.
I don't know if it's specifically my phone, or a bug, so i'm just throwing it out there.
Click to expand...
Click to collapse
What carrier are you getting 3G to work? I doubt its working if its anything that doesn't run on tmobiles bands..the icon will come up and stuff but your either getting edge speeds or not getting any connection. I've had this phone show me 3G with full bars and just time out.. I can eveven put in a sim with a sidekick plan or other data plan and it shows 3G but it does not work
Well, i'm overseas and i have used it on Russian carrier Beeline and carriers in two other countries. Now, i do set my connection to WCDMA only, which gives me 3G icon. When i set it to GSM only, i see GPRS icon show up.
So, it does work, i use fring, online radio, google maps. But as far as speed concerned, i have not tested it.
Just ran a speed test using Speedtest.net tool, I get 3951kbps download, and 655 upload
thats 3G
Anyone have this problem? It happens ever time
Sent from my T-Mobile G2 using XDA App
Hmm.... seems like your phone might be in WCDMA mode only... It should be in WCDMA-Preferred since you plan on using 3G and 2G
Go to your phone dialer and dial *#*#4636#*#*
and Diagnostics Menu should come up..... Go to PHONE INFORMATION.... Scroll down and Set Network Type to: WCDMA Preferred
see if that helps...
Thanks for the reply i am on tmobile and it is defaulted to GSM. Will changing it be any different than GSM?
my phone does that as well right now at home even though i have it on WCDMA preferred, t-mo has been having issues with their 4G towers and their DNS servers lately that has been affecting many people with newer phones/SIM cards and in 4G areas, t-mo has not released an ETA on a fix but i have been dealing with it for a month now at my home and i am about ready to switch carriers
tvdang7 said:
Thanks for the reply i am on tmobile and it is defaulted to GSM. Will changing it be any different than GSM?
Click to expand...
Click to collapse
Nope, it'll still be the same. WCDMA-Preferred means that then phone will Prioritize 3G/4G signal over an EDGE signal. So If you are in a decent 4G/3G coverage the phone will set itself into 3G/4G mode... and when you move into an area where you have a weaker 3G/4G signal...t han the phone will be in EDGE mode.
Keep in mind that if you're referring about using WCDMA Preferred in a 3G/4G coverage area - but only 2G works - then you have a network issue. This isn't so much a device issue as it is a MSISDN issue on the network or a potential tower issue.
If you get no signal on 3G/4G and signal is there on 2G - check your coverage first - then if coverage shows you should have 3G/4G, call TMO and let them know, they'll need to do a service request or trouble ticket based on the location and breadth of the issue you're having.
I have had my SGSII for about 6 weeks now. Running it on the Telstra Next G network.
The problem is I am having a shocking internet experience.
My experience is based after coming from the HD2 running Android.
I have had the network freeze a few times. This is identified by the traffic arrows stay stuck. Airplane mode and back resets.
Basically cloud based apps like Market, Maps etc takes ages (60s-5mins) to start up. Kill and re-launch is quick).
Lots of network errors in Google Market.
Lots of Server unreachable errors in Emails (Pointing to exchange 2007)
I have updated the APN details to use Telstra.internet.
Great reception at home and work.
Calls and SMS's are fine.
Ideas? Waiting to see the Cyanogen rom. Wondering if my experience is due to Kies or another program getting involved with internet.
Any ideas please. My HD2 ran with the same Sim and worked like a rocket. No such issues.
Have you tried turning fast dormancy off? I'm on the Optus network, but I found with fast dormancy on I was getting unreliable internet (market would timeout a lot, doing installs/updates would fail straight away, etc). When I turned it off, I got better speeds and the connections were reliable.
Turn fast dormancy off:
1. In dialer - *#9900#
2. Select Disable fast dormancy
no such issues for me, using a vodafone branded handset. The only thing is that it will occassionally use 3telstra instead of telstra, in which case i need to manually select the network. a bit of a pain but not 2 bad
flagger said:
Have you tried turning fast dormancy off? I'm on the Optus network, but I found with fast dormancy on I was getting unreliable internet (market would timeout a lot, doing installs/updates would fail straight away, etc). When I turned it off, I got better speeds and the connections were reliable.
Turn fast dormancy off:
1. In dialer - *#9900#
2. Select Disable fast dormancy
Click to expand...
Click to collapse
Thanks, will try. what does fast dormancy do?
Found this as well
http://forums.whirlpool.net.au/archive/1713536
Looks like it speeds up connection ramp up and down.
Found this on
http://forums.whirlpool.net.au/archive/1714413
****************** FIXED ******************
After contacting Samsung for an insane period of time (ended up on an international call to England i think... or now that i think about it could have just been some English guy in Aus lol) I have got an official explanation and confirmation that this issue is being looked into for KE8 (but it appears that KE8 has been launched in India already so it might be KE9).
*disclaimer*
I am no expert on mobile technology this in-depth however the (probably very) dumbed down version the Samsung guy told me was this;
*end disclaimer*
The problem stems from the fact that this phone has 3 forms of data connection, 3G, HSDPA, and HSPA+.
3G is what we have all had since 3/Telstra launch 10 years ago.
HSDPA is the 7.2mbps connections that we got after that.
HSPA+ is the full fledged 42mbps Next G stuff that only Telstra has.
The problem is, when you are just using the phone as "a phone" it idles on a 3G connection to save battery and when you initiate a data connection it flicks on to the higher connection protocols for better speed.
What is supposed to happen when you initiate the data connection is the phone checks for H+ connection, then for H and then finally 3G. For some reason if you arent with Telstra or are in an area without HSPA+ the phone gets hung up for too long attempting to initiate the H+ connection and refuses to drop back to H!
Also, even if it does give up on H+ it then has an issue with falling back to 3G. Resulting in the problem that if it cant get H+ or the tower is too flooded for a H connection you get absolutely nothing until you restart the data mode within the phone, renegotiates with the tower and BAM, you are back in business.
So... there are 5 fixes;
1. Wait for KE9 (or what ever firmware fixes the modem timings etc)
2. Get a Telstra sim and never leave an area that has H+
3. Turn off/on data mode whenever it happens
to which i told him they were stupid answers and completely unacceptable, but then he came out with this complete gem!
4. using service code *#301279# you can turn off HSPA+ completely forcing it to start the data connections on HSDPA
5. using *#301279# again you can just turn off HSPA+ and HSDPA meaning it instantly starts downloading the data on 3G without delay
Now yes, i thought... great... ive bought this $779 phone that has all the latest and greatest technology and I cant even use it! But, I did some testing!
First of all my normal sim is Vodafone so turning off HSPA+ is an obvious one for me, im never going to get it so why bother. So now that the phone only attempts to get a connection with HSDPA the need to turn off and on data connection was getting more and more rare but still having the problem (i have a feeling that is due to congestion?). So i bumped it down to 3G only and it works perfectly 100% of the time!
The point of these faster connection protocols is speed so i did testing.
Vodafone sim, 4 bars of signal in the middle of a shopping centre.
HPSA+ turned on = 4mbps down, 1mbps up
HSDPA turned on = 4mbps down, 1mbps up
3G only = 3.5mbps down, 1mbps up
did this over and over and over again and to be perfectly honest, im willing to lose 500kbps to make sure that data always works and if you are just doing general web browsing the time it takes to initiate the HSDPA connection wastes more time than the slightly slower speeds with 3G does.
Now obviously this only works fine in my situation, if you are with Telstra and going from HSPA+ down to 3G means going from 20mbps to 3... i would be pissed. But for the rest of the country you are talking about a loss of less than 1mbps so in real world situations with just small amounts of burst data its fine
TLDR; Try and go online and the 3G up arrow lights up but never actually downloads anything
Dial: *#301279# – Change HSPA revision – Release 5 HSPDA only
test, if still a problem
Dial: *#301279# – Change HSPA revision – Release R99 HSPA off
Your welcome, Peace out!
dusty_nz said:
Found this on
http://forums.whirlpool.net.au/archive/1714413
****************** FIXED ******************
After contacting Samsung for an insane period of time (ended up on an international call to England i think... or now that i think about it could have just been some English guy in Aus lol) I have got an official explanation and confirmation that this issue is being looked into for KE8 (but it appears that KE8 has been launched in India already so it might be KE9).
*disclaimer*
I am no expert on mobile technology this in-depth however the (probably very) dumbed down version the Samsung guy told me was this;
*end disclaimer*
The problem stems from the fact that this phone has 3 forms of data connection, 3G, HSDPA, and HSPA+.
3G is what we have all had since 3/Telstra launch 10 years ago.
HSDPA is the 7.2mbps connections that we got after that.
HSPA+ is the full fledged 42mbps Next G stuff that only Telstra has.
The problem is, when you are just using the phone as "a phone" it idles on a 3G connection to save battery and when you initiate a data connection it flicks on to the higher connection protocols for better speed.
What is supposed to happen when you initiate the data connection is the phone checks for H+ connection, then for H and then finally 3G. For some reason if you arent with Telstra or are in an area without HSPA+ the phone gets hung up for too long attempting to initiate the H+ connection and refuses to drop back to H!
Also, even if it does give up on H+ it then has an issue with falling back to 3G. Resulting in the problem that if it cant get H+ or the tower is too flooded for a H connection you get absolutely nothing until you restart the data mode within the phone, renegotiates with the tower and BAM, you are back in business.
So... there are 5 fixes;
1. Wait for KE9 (or what ever firmware fixes the modem timings etc)
2. Get a Telstra sim and never leave an area that has H+
3. Turn off/on data mode whenever it happens
to which i told him they were stupid answers and completely unacceptable, but then he came out with this complete gem!
4. using service code *#301279# you can turn off HSPA+ completely forcing it to start the data connections on HSDPA
5. using *#301279# again you can just turn off HSPA+ and HSDPA meaning it instantly starts downloading the data on 3G without delay
Now yes, i thought... great... ive bought this $779 phone that has all the latest and greatest technology and I cant even use it! But, I did some testing!
First of all my normal sim is Vodafone so turning off HSPA+ is an obvious one for me, im never going to get it so why bother. So now that the phone only attempts to get a connection with HSDPA the need to turn off and on data connection was getting more and more rare but still having the problem (i have a feeling that is due to congestion?). So i bumped it down to 3G only and it works perfectly 100% of the time!
The point of these faster connection protocols is speed so i did testing.
Vodafone sim, 4 bars of signal in the middle of a shopping centre.
HPSA+ turned on = 4mbps down, 1mbps up
HSDPA turned on = 4mbps down, 1mbps up
3G only = 3.5mbps down, 1mbps up
did this over and over and over again and to be perfectly honest, im willing to lose 500kbps to make sure that data always works and if you are just doing general web browsing the time it takes to initiate the HSDPA connection wastes more time than the slightly slower speeds with 3G does.
Now obviously this only works fine in my situation, if you are with Telstra and going from HSPA+ down to 3G means going from 20mbps to 3... i would be pissed. But for the rest of the country you are talking about a loss of less than 1mbps so in real world situations with just small amounts of burst data its fine
TLDR; Try and go online and the 3G up arrow lights up but never actually downloads anything
Dial: *#301279# – Change HSPA revision – Release 5 HSPDA only
test, if still a problem
Dial: *#301279# – Change HSPA revision – Release R99 HSPA off
Your welcome, Peace out!
Click to expand...
Click to collapse
THIS IS A GREAT POST (even if it is a repost from whirlpool)!
So many people appear to be having this issue (including myself on O2 UK) where the data connection is stalling.
That code (*#301279#) is a gem.
Whilst I am certainly not happy that Samsung have released this phone with such a massive issue (telling you to wait until KE9 for a fix is really quite terrible!), I would rather have this fix in the meantime whilst waiting for the new firmware.
I have just disabled H/H+ by selecting 'Release 99 HSPA off' and my stalling issues have disappeared. Furthermore, my down speed is still 1.5 Mbps and upload speed is also 1.5 Mbps. I am more than happy with that speed. As the quoted post states, if you want more than this speed, this solution will not be good for you.
Thanks for posting this dusty_nw, this has been bugging me for weeks.
dusty_nz said:
Thanks, will try. what does fast dormancy do?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=14457802&postcount=8
If you have it enabled it will fall from H to 3G in 7 seconds when connection is idle, otherwise in 30 seconds. 7 seconds are to short it will lose time and battery renegotiating to H to often. Ex: when you read your rss feed it will renegtiate higher speed for every article you read, very annoying.
Click to expand...
Click to collapse
this should be stickied, fixed my issues i had on optus the connection would continually change from H, and 3g and stall i just disabled all except 3g and now its perfect and very quick great post!
One thing i did on mine with Telstra is change the APN from Telstra.wap to Telstra.internet made the internet feel better. Also got much better upload and download speeds.
Sent from my GT-I9100 using XDA Premium App
May be a sillt question but.
I used the stock dialer and put *#301279# in
Menu popped up.
Used my finger to press "[2] Change HSPA Revision"
Pressed "[2] Release 5"
Goes to menu with two options of which none seem to do anything when pushed.
Went back to strat of menu and selected "[1] Release R99"
Same options and none can be clicked.
So am I not doing this right? Have the changes been made with no signs or message? If they have changed how do I get them back?
I expected the option to change to visually say its "off" or something.
Although no message came up it appears my phone is staying in 3g so maybe it worked... Although I am in low reception visiting the country side so maybe they don't have H or H+ anyway....
If I selected the first option does this restrict data to 3G?
Select 2nd option for H?
or Select 3rd option for H+ or unrestricted?
Is this how its works?
Edit: I have now found it works like I thought. The screen after I click either of the options then shows what is active and is the confirmation in a way. I jumped on the forum a little too quick......
Hi. I've book marked this because I get this issue thanks.
However it is worth noting that difference between 6 and 5 is only hsupa which is upload. So you wouldn't expect change in download speeds changing that going back to 3g of course affects both directions.
tjjensen23 said:
One thing i did on mine with Telstra is change the APN from Telstra.wap to Telstra.internet made the internet feel better. Also got much better upload and download speeds.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
WOW!!!! I just switched over.. mine use to max out at about 8Mbps, but my last test before the swap was 6.7Mbps... switched over and i tested 10Mbps and then 11mpbs!!
gunigugu said:
WOW!!!! I just switched over.. mine use to max out at about 8Mbps, but my last test before the swap was 6.7Mbps... switched over and i tested 10Mbps and then 11mpbs!!
Click to expand...
Click to collapse
Telstra.iph works best for me in Perth.
I use a SGS2 (bought in Europe through Expansys) on Telstra since 2 months now, without any issue. I used several firmwares and kernels since then (not to test, just to update: KE7, KG2, KG3), all behaved the same way.
I tried two different APN (telstra.iph and telstra.wap), both gave me the same kind of speeds (quite good, except some times in the middle of the day).
I never found the datas to create the telstra.internet APN (they do not seem to be on ausdroid). Could someone point me to them?
As an aside, I've just finished testing the I9000TDUKF4 modem (yes it works!), if Telstra did actually have tweaks made as they claim, there was no discernible difference on Telstra's NextG using their 'T' version KF4 modem and a stock KG3.
Any changes if any must be on the hardware level or via software set tweaks, the modem really didn't make any difference at all to my download speeds.
For those wanting to replicate the experiment or muck around I've uploaded the Telstra 'T' variant KF4 modem here: http://www.multiupload.com/VKPFYPURD5
asgard said:
As an aside, I've just finished testing the I9000TDUKF4 modem (yes it works!), if Telstra did actually have tweaks made as they claim, there was no discernible difference on Telstra's NextG using their 'T' version KF4 modem and a stock KG3.
Any changes if any must be on the hardware level or via software set tweaks, the modem really didn't make any difference at all to my download speeds.
For those wanting to replicate the experiment or muck around I've uploaded the Telstra 'T' variant KF4 modem here: http://www.multiupload.com/VKPFYPURD5
Click to expand...
Click to collapse
Thanks for this, I just stumbled upon this thread, messed about with a few settings and getting much better use out of NEXT G
Cheers
For those on T-Mobile UK Network, could you share your thoughts about the data roaming between T-Mobile - Orange 3G network?
Does it work for you, does it boosts speeds?
In my case it defaults to T-Mobile Orange, although this is a correct selection signal-wise, as I've got 3-4 bars of 3G+ (2-3 bars with 'vanilla' T-Mobile), I guess Orange speeds are **** in my area, resulting to 700/40 Kbps down/up best case scenario (40 Kbps, that's kilobit per second, or 5 KB/sec). Worst case scenario is ping time-outs, because the upload speed is so slow that even the initial command is difficult to be transmitted. Sites with pictures is almost a no go, the same applies to traffic intensive apps, e.g. maps.
When I force T-Mobile via Settings (manual Network selection, data roaming set to off) speeds go up, to acceptable 1700/300 Kbps. But after a couple of minutes, the network changes to T-Mobile Orange.
I called cc to deactivate data roaming (international), just in case it deactivates domestic one, but to no avail. No one in T-Mobile knows if I can opt-out of domestic data roaming and give me foolish instructions ''remove your battery, remove SIM card, reboot phone blah blah blah****''
Any experiences? Does 3G roaming work for you?
Hi, its kinda hard for me to tell as I normally have quite bad signal and its really annoying. I had issues with WiFi and 3G conflicting and I thought it was the 3G but since I updated to mi7ROM I havent had this problem - so not sure pal
I'm on Orange UK and opted into this ages ago. As far as I can tell it's a load of rubbish and doesn't work properly.
In my flat I get low GPRS with Orange. If i force it to T-Mobile I get full 3G. However the roaming defaults to Orange and so I'm stuck with GPRS and poor reception.
In addition the Omnia can't seem to handle switching between networks properly resulting in data connection problems where it will lose it altogether.
I have noticed that the T-Mobile 3G speed seems higher than the Orange 3G speed too.
i can only echo Freypal, thats the exact same as my situation. great idea, but it doesnt seem to have been implemented properly.
robnewton1 said:
i can only echo Freypal, thats the exact same as my situation. great idea, but it doesnt seem to have been implemented properly.
Click to expand...
Click to collapse
As a t-mob customer i too find that the auto switch to orange results in my data falling over, requiring me to go into flight mode so that it will auto reselect the t-mob network.
I did ask to be opted out but the t-mob CS recommended that I be patient. They are aware that there are problems but hope to have them sorted soon(ish)
I'm having exactly the same experience as the original poster. I took the phone into the shop and a staffmember agreed that the Orange-TMobile 3G is not working yet and they are getting a lot of complaints. I spoke to customer services but they say you cannot opt out and they are working to resolve the problems...but they would not give a timeframe when pushed ("days, weeks or months?").
I think its worth starting an Ofcom complaint.
Please sign this petition I set up.
http://www.ipetitions.com/petition/t-mobile-orange-signal/
T-Mobile has implemented signal sharing with Orange. In theory this should enhance coverage--particularly 3G coverage--for T-Mobile customers.
The reality is that this signal sharing is not working properly. T-Mobile customers' phones are constantly getting stuck on Orange transmitters even when there is good T-Mobile reception available. This can mean customers have barely 1 bar of low-speed 2G ("G") Orange signal even when there is strong T-Mobile 3G signal available in the area.
T-Mobile say they have activated "smart signal sharing" which should prevent the above from occurring. However, this has failed to fix the problem.
T-Mobile say customers can't opt out of the new scheme. It needs to take notice that for many of its customers the signal sharing scheme is counter-productive and *reduces* the quality of the service they are getting.
Please sign this petition so that T-Mobile/OFCOM realize the extent of this problem.
sab742 said:
Please sign this petition I set up.
http://www.ipetitions.com/petition/t-mobile-orange-signal/
T-Mobile has implemented signal sharing with Orange. In theory this should enhance coverage--particularly 3G coverage--for T-Mobile customers.
The reality is that this signal sharing is not working properly. T-Mobile customers' phones are constantly getting stuck on Orange transmitters even when there is good T-Mobile reception available. This can mean customers have barely 1 bar of low-speed 2G ("G") Orange signal even when there is strong T-Mobile 3G signal available in the area.
T-Mobile say they have activated "smart signal sharing" which should prevent the above from occurring. However, this has failed to fix the problem.
T-Mobile say customers can't opt out of the new scheme. It needs to take notice that for many of its customers the signal sharing scheme is counter-productive and *reduces* the quality of the service they are getting.
Please sign this petition so that T-Mobile/OFCOM realize the extent of this problem.
Click to expand...
Click to collapse
Signed