Related
how the hell do you turn off the device, if i press the power button once the screen goes completely black and i cannot tap anything but i can still recieve calls and if i press any of the buttons it comes alive. if i press and continue pressing for two seconds, the screen simply dims and i can still tap on the screen?
so how do you switch it off?
and if you reset how do you prevent it from loading the T-Mobile customization?
Also, mine has a dead pixel and i have just opened it can i take it back as faulty? it's only one dead pixel but it's really really annoying...does it count as a fault. i'm gonna try and take mine back tomorrow
A short press turns the unit off
A longer press will shut down the backlight, but leave the unit on
Longkesh said:
A short press turns the unit off
A longer press will shut down the backlight, but leave the unit on
Click to expand...
Click to collapse
Well, when i do that the screen goes blank but i can still recieve calls and if i press any of the buttons it goes back on again!!!!!!!!!!!!
To totaly turn off the device you need to slide the battery lock button out and then back in. It is the only way I have found to totaly turn the device off.
To lock the keys go into "settings" then "system" and choose "button lock" then choose "Lock all buttons except power button".
John
oh, i see. i thought it was like the other phones, nokia SE etc.
thanks alot for all your replies
thank you
this is not a phone, this is a pdaphone, it works like a pda... if you want tu turn off the phone, you can use the flight mode.
sayreul said:
this is not a phone, this is a pdaphone, it works like a pda... if you want tu turn off the phone, you can use the flight mode.
Click to expand...
Click to collapse
I dont think it has anyhting to do with PDA. I have had 3 PDA's before. All of them had an "off" button that turned the thing off. Ditto for phones. So this is just Microsoft's strange decision. Dont make the guy feel back just because he is thinking logically - and they are not.
I've had quite a few PDAs over the years:- Casio E80? Psion 3, 3a, 3c, 5, 5mx, iPaq 3630, XDAI, XDAII, MDA Compact.
None of them have ever had an off button. They turn off the screen and may even slow the processor or put it in sleep mode. But they all kept their memory powered up and clock / alarms / appointments alive at all times.
This may change in the future as flash ram is now fast enough that you could actually run stuff from it so you could truly kill power (apart from clock and wakeup stuff) without emptying your memory.
My old Visor Edge, Palm Tungsten T, T2 and TE all had off buttons. I dont know of any electronic device where anyone should expect that the "off" botton doesn't turn it off.
If that button on Windows Mobile devices is a "sleep" button, then they should mark it with a "sleep" symbol, rather than the intl symbol for "power", which is what they have on there - and which is what confuses people.
skagen said:
My old Visor Edge, Palm Tungsten T, T2 and TE all had off buttons. I dont know of any electronic device where anyone should expect that the "off" botton doesn't turn it off.
If that button on Windows Mobile devices is a "sleep" button, then they should mark it with a "sleep" symbol, rather than the intl symbol for "power", which is what they have on there - and which is what confuses people.
Click to expand...
Click to collapse
So, if your Palm completely powered down when you pressed this magic "off" button, how come the alarms still worked? How come it woke up when you pressed any of the four application buttons or tapped the screen? How come your data was still kept in RAM?
More wisdom from the skagen...
My Nokia 6100 has an off button and it works. Doesn't stop my alarms from waking me up. So did my SE T610 before that
Everybody here has had a cell phone before. The all have "off" buttons that turn the device off. Only Microsoft, in its infinite stupidity, has decided to have a an "off" button that should in fact be labelled "sleep".
You are the one with no clue.
If you press the "off" button on your N 6100 or SE T610 you are right in that they would really be off. You can not receive a call, any alarms will not sound until you turn the phone on again and so on.
But this is not so for most PDA:s on the market.
Most PDA:s will go into some kind of sleep mode when you press the "off" button. And mostly it is not even a true sleep mode, a lot of processes are still running, and even network connections can be kept active. This is also the way most PDA users would want their PDA to work. Also, the way most PDA:s are built, a power down means resetting everything back to defaults and thereby loosing all of your data and third party applications. This could be cured by using non volatile RAM for all of the memory, but I guess there is probably a good reason why this is not normally done.
Actually, on most modern computers a short tap on the power button will put them in suspend mode and holding it for more than two seconds will turn them off. So the only thing that is really strange with the PDA is that a long press on the button will not even put it in sleep mode but only shut off power to the display. And as I actually don't know anyone that has ever used that worthless function I think they should probably replace it with a "real" sleep mode, where all of the hardware is actually shut off except for support voltage to keep the memory "alive".
bamse said:
If you press the "off" button on your N 6100 or SE T610 you are right in that they would really be off. You can not receive a call, any alarms will not sound until you turn the phone on again and so on.
Click to expand...
Click to collapse
On N 6100 ,and on all nokia phones, the clock alarm wake's up the phone... You then have a choice of whether to activate the phone or not...
Same with all the Siemens phones I owned ( 4 so far). When shutting off the phone, the clock and alarms keep working. The only thing that does not work, off course, is the radio so incoming calls are diverted to voice mail. But with the phone off, the alarms still wake me up!
It would indeed be a good idea if using the power button on any type of XDA would turn the device really off, using power only for keeping the clock working and the data stored...
If the alarms jeep working on your phone when in "off" mode it is not actually off but in a low power mode with the phone functions turned off. So what you are really asking for is that the power button should turn off the phone but keep the pda running. This seems quite useless to me. Exactly how often are you in such a hurry to turn off the phone?
Yes, the device is in sleep mode, but it is a very deep sleep indeed, since it uses close to zero power. When I put my Compact in sleep mode, running programs will not shut down but will stay running, the Today screen is still running and the same goes for the phone radio and GPRS. This means that the battery drains much quicker. So in order to save power, I have to turn off the radio (flight mode), kill running apps and then put the device to sleep with the power button. Seems like rather a hassle, doesn't it, compared to a normal phone? So I don't mean for the PDA to keep running ful operations, but rather to power down to a level where it only uses a little power to keep the storage working. And when waking up, I don't need to see the Today right away, a few seconds loading the screen like on a normal phone is worth the power save to me.
skagen said:
My Nokia 6100 has an off button and it works. Doesn't stop my alarms from waking me up. So did my SE T610 before that
Everybody here has had a cell phone before. The all have "off" buttons that turn the device off. Only Microsoft, in its infinite stupidity, has decided to have a an "off" button that should in fact be labelled "sleep".
You are the one with no clue.
Click to expand...
Click to collapse
This guy is unbelievable. You were claiming that your Palm turned completely off when you hit the off button - not a cellphone, jerk.
Koksie said:
When I put my Compact in sleep mode, running programs will not shut down but will stay running, the Today screen is still running and the same goes for the phone radio and GPRS. This means that the battery drains much quicker. So in order to save power, I have to turn off the radio (flight mode), kill running apps and then put the device to sleep with the power button.
Click to expand...
Click to collapse
Wrong - programs that can be _are_ suspended when you put the PDA into standby. Try it with MediaPlayer.
How do you know the Today screen is still running? Like you know the fridge light really stays on when you shut the door?
Wouldn't you be complaining more (because of the missed calls) if turning the PDA off to save the battery also killed the phone?
Most of us can get our heads round this - the Standby button on the side controls the PDA. The Flight mode controls the phone. Not exactly difficult, is it?
Koksie said:
And when waking up, I don't need to see the Today right away, a few seconds loading the screen like on a normal phone is worth the power save to me.
That's where you fall into sjkagen's trap, again. For the zillionth time, the Jam/Compact is not just a phone. It's primarily a PDA. That's why it costs so much more than a phone. And on a PDA, you need to be able to look up information instantly - not have to wait a minute for the darn thing to boot up.
Click to expand...
Click to collapse
skagen said:
My Nokia 6100 has an off button and it works. Doesn't stop my alarms from waking me up. So did my SE T610 before that
Everybody here has had a cell phone before. The all have "off" buttons that turn the device off. Only Microsoft, in its infinite stupidity, has decided to have a an "off" button that should in fact be labelled "sleep".
You are the one with no clue.
Click to expand...
Click to collapse
Oh skagen, how ignorant you are. Seems you cannot understand pictures, let alone words.
The label on the Jam "off" button is a line through a broken circle, which is the IEC symbol for STANDBY, not POWER OFF. Just like on all other PDAs, and your TV remote control.
See
http://eetd.lbl.gov/Controls/overview/symbols1.pdf
Now look again at all your "phones" which completely shut down when you press the "power" button. What symbol do they have?
Seeing as you obviously have so much difficulty telling the difference between a cellphone and a Palm, a phone and a PocketPC, or a power switch from a standby button, here's another teaser for you.
1. How do cellphones manage to keep their memory when they are turned off or the battery is removed?
2. What is the difference between the memory in cellphone and that in most PDAs?
3. Why do most PDAs have Standby (Soft Off) and not Power (Hard Off) buttons?
Wow, seems like some people are getting really sensitive when I call the Magician a phone... Sorry if I insulted you guys, it is just that I compare it to a phone because I use it for that the most, but I do understand that it is actually much more than that!
I have no problems with the way the sleep button works, it is ok for me, I just wanted to say that there are other possibilities that could have been used to map the button to. Especially since some people would have liked the button to work more "phone wise". But since it is primarily a PDA, I see that this current application is the most logical thing for the button to do.
BTW you are totally right that most running apps are termintated when pushing the power button. Although WMP stays active in the running programs menu, the music is cut off. However, since the prog stays loaded, does this consume more power than shutting it down completey (e.g. with SPB Pocket Plus)?
I think the Today screen stays loaded BECAUSE IT IS RIGHT THERE AFTER WAKE UP, just as you say: it does not have to be booted first. BTW: I have a little window in my fridge door to check wether the light goes off .
And please guys, don't call each other jerks or ignorant just because someone's questions or remarks anoy you. Reply polite or don't reply at all!
Hi all.
I have this annoying problem with my Blackstone.
When the screen turns off everything closes down. It's really annoying if i'm using messenger or something and not look on it for 2 min it closes messenger down.
I know i can choose in battery setting not to turn off the unit if it's not used for a while, but i still like that the screen is turned off, but still working.
Can this be done??
Dipper60 said:
Hi all.
I have this annoying problem with my Blackstone.
When the screen turns off everything closes down. It's really annoying if i'm using messenger or something and not look on it for 2 min it closes messenger down.
I know i can choose in battery setting not to turn off the unit if it's not used for a while, but i still like that the screen is turned off, but still working.
Can this be done??
Click to expand...
Click to collapse
Yes it can.
Go to Start/Settings/System/Power/Advanced and you can select the screen or backlight to turn off if device is not used for x mins on either battery or external power
Fallen Spartan said:
Yes it can.
Go to Start/Settings/System/Power/Advanced and you can select the screen or backlight to turn off if device is not used for x mins on either battery or external power
Click to expand...
Click to collapse
Yeah i know, but it only turn the lights down, not turn the screen off. It's only if i choose to turn off the device the screen turns off.
I use gyrator to set up an event that turns the screen off without turning the device off when the stylus is inserted (you can modify the default gyrator behaviour which is to lock the screen when the stylus is inserted). If you want to be fancy you could set it up to turn the screen off if the phone is turned face down, you don't really need the screen on then anyway unless you're in the habit of looking at your phone above your face while lying on your back, or trying to use it while doing acrobatics in an stunt plane.
shuflie said:
I use gyrator to set up an event that turns the screen off without turning the device off when the stylus is inserted (you can modify the default gyrator behaviour which is to lock the screen when the stylus is inserted). If you want to be fancy you could set it up to turn the screen off if the phone is turned face down, you don't really need the screen on then anyway unless you're in the habit of looking at your phone above your face while lying on your back, or trying to use it while doing acrobatics in an stunt plane.
Click to expand...
Click to collapse
Well i can't get it to work :-/
What i'm looking for is also a thing so the device isn't turned off when i push the turn on/turn off button on the top. I want to use this button to turn off the screen and not close down the programs.
This is what i'm looking for and i hope someone can help me
Dipper60 said:
Well i can't get it to work :-/
What i'm looking for is also a thing so the device isn't turned off when i push the turn on/turn off button on the top. I want to use this button to turn off the screen and not close down the programs.
This is what i'm looking for and i hope someone can help me
Click to expand...
Click to collapse
Just tried the screen off when phone is face down and it doesn't seem to be working for me either for some reason. But the stylus in event is working fine, just pop the stylus out and put it back in again and the screen goes completely off without killing the processes in the background (can still explore phone with active sync). I wouldn't want to mess with the power button as that is really useful to provide a proper device suspend when I want it.
I have a similar problem but with the GPS.
I have raised the question here, on some other forums and directly to HTC.
From HTC I got the answer that it is done by design to minimize battery drain and that they would have many angry costumers complaining about low battery life.
The only solution I know of so far is to use a 3rd party app.
I use "screenoff" and everytime I use the GPS I go to advanced-power and uncheck all the boxes.
When I'm done using the GPS I check the boxes again, otherwise I'll have to remember to turn the screen off manually everytime in "normal" usage of the phone.
I think it's sad though on such an expensive device not to have the option to run programs and hardware in sleep mode.
I'd rather find a solution where I can push the power button as usual and where I can have the boxes in advanced-power checked all the time.
I managed to get gyrator to turn the screen off by flipping face down, just needed to put the screen off command before all the rotation disable commands. Now if I want to disable the screen I just have to flip it face down for a second or so.
Thx for all your help.
But i found out that it's not only when the screen turns off everything closes. If i just leave it on home screen for like 2 min. everything also closes down.
I've heard from another forum that it's something HTC has decided to do to keep on the battery....
I don't know if there is anything to do here then??
Go to the start button, select settings, select system , scroll down and select power then the advanced tab and UNTICK Turn off device if not used for 2mins for both external and battery power.
shuflie said:
Go to the start button, select settings, select system , scroll down and select power then the advanced tab and UNTICK Turn off device if not used for 2mins for both external and battery power.
Click to expand...
Click to collapse
Done that... Still closes everything after around 2. min....
Strange, doesn't do that on mine.
shuflie said:
Strange, doesn't do that on mine.
Click to expand...
Click to collapse
I had a similar problem and only thing which resolved it was a hard reset!
I'm just testing it again to make sure. Have a track playing in the HTC music app and I'm signed in to messenger. Screen is off and I'm waiting for 3 mins to make sure.
Fallen Spartan said:
I had a similar problem and only thing which resolved it was a hard reset!
Click to expand...
Click to collapse
That was going to be my next suggestion, really doesn't sound like normal operation to me. So hardreset and install one app at a time until you find out what is messing things up for you. 3 mins are up and track is still playing and I'm still signed in to messenger.
Thanks to a guy called Dawsonas I just found a program called Pocketshield.
It has an application permission feature:
"When this app is running override power off: just do screen off" (use this option for music players, GPS apps, loggers, IM, or any app that needs the device to stay awake). This setting will take effect either when "Power off on lock" or "Power off after 20 seconds" options are enabled.
Check it out
http://pocketshield.netserver01.com/
Magster said:
Thanks to a guy called Dawsonas I just found a program called Pocketshield.
It has an application permission feature:
"When this app is running override power off: just do screen off" (use this option for music players, GPS apps, loggers, IM, or any app that needs the device to stay awake). This setting will take effect either when "Power off on lock" or "Power off after 20 seconds" options are enabled.
Check it out
http://pocketshield.netserver01.com/
Click to expand...
Click to collapse
I will try that
But do you guys think it could be some settings in the ROM? Should i try another one or what do i do when you say it isn't normal for the phone?
I've done the usual search and can't find anyone reporting this . . .
If I turn mt AT&T Pure off with the power button (not complete power down, just normal on/off) I notice a faint glow from the screen like it's still trying to show the backlight.
If I power up and then power down a second time, there is no glow.
This phone is running stock AT&T ROM, and it happens on battery power - so I'm concerned that it's draining the battery unnecessarily.
Battery settings -- "Auto adjust backlight" NOT checked
power save sliders around 30%.
Advanced tab -- "On battery power" - both boxes checked, 30 sec backlight off, 3 minutes turn off. "On external power" - neither box is checked
Any ideas?
Thanks
Try installing this cab, changes registry to auto lock with power button.
If it doesn't work, you may consider a lock screen such as smart lock.
Thanks for the post, but I don't understand what it does -- could you explain how the phone should behave after installing the CAB?
Thanks
Using this reg edit makes the device go into standby once you press the power button, no backlight staying on etc.
Includes the following reg edits.
Code:
[HKEY_CURRENT_USER\ControlPanel\BackLight]
"ACBrightness"=dword:0000000a
"ACTimeout"=dword:00000000
"ACTimeoutTemp"=dword:00000000
"ACTimeoutUnchecked"=dword:00000000
"AutoBklOffset"=dword:00000000
"AutoDeviceLockEnable"=dword:00000001
"AutoDeviceLockTimeout"=dword:00000005
"AutoSensor"=dword:00000001
"BatteryTimeout"=dword:00000078
"BatteryTimeoutTemp"=dword:00000000
"BatteryTimeoutUnchecked"=dword:00000078
"Brightness"=dword:00000007
"DimBKLinUnlockScreen"=dword:00000000
"LedOnOffAdcValue"=dword:0000013f
"LightDetectOn"=dword:00000000
"MAXBrightnessScale"=dword:0000000a
"MINBrightnessScale"=dword:00000001
"QKeyLedTimeout"=dword:0000000a
[HKEY_CURRENT_USER\ControlPanel\BackLight\LockLevel]
"LockLevel"=dword:00000000
Thank you very much!
Hi All,
I have been having trouble with the phone.
The screen has been turning on by itself and not turning off. The screen will not turn off until i hit the power button. It will not turn off until the phone is out of battery.
Is anyone else having this problem?
thanks!
Want to bump this up ... having the same issue. I've uninstalled nearly every app (at least the ones I'd think would be problematic) and it's still happening. I've downloaded Spare Parts today to see if I could figure it out but I don't have enough data yet.
Anyone else have this issue? Even when I press the lock button, I sometimes need to press it multiple times to get the screen to turn off.
I too am having this problem and boy does it suck battery lol
Sent from P3X231
Do you guys have power saving mode enabled or disabled? Just curious, since that's one of the only things (in addition to message notifications) that affects the screen.
can it have anything to do with automatic updates?
i never had this issue. before or after root. i just rooted two days ago
I had this problem before and after root. I also did a factory reset and I thought it was fixed ... but now it's doing it again.
Happens w/ Power Saving mode enabled and disabled.
I've figured out a semi-solution to this which seems to be working:
With Advanced Task Killer:
Enable Auto Kill Frequencey "When screen off"
Set Auto Kill Level to "Aggressive"
Set Security Level to "Medium"
Don't forget to put any apps you don't want killed in the ignore list (like WidgetLocker, your music player, etc.)
This seems to keep the screen locked for me ... but I still can't figure out what app/process is the culprit in waking the screen when it goes to sleep.
I'm using an alarm clock called Morning Routine. It's great since I'm a heavy sleeper, but I have one problem with it. While the program DOES lock the screen and keep me from going home and closing the app, I can still long-press the power button, access the Phone Options menu, and turn the phone off. I'm a heavy enough of a sleeper that I figured out how to do this while still half-conscious. So, I was wondering if it is possible to develop a script to temporarily or permanently do one of the following:
1) Disable the long-press of the power button to launch the Phone Options menu.
2) Remove Power Off from the Phone Options menu (I know some ROMs add Reboot to this menu, so theoretically, couldn't something be removed?)
3) Re-map the long-press of the power button to another function (thereby disabling the Phone Options menu)
None of these will be a problem if they are permanent - I can download an app that will allow me to shutdown my phone from a widget instead of the power button.
Oh, I'm on the crappy ol' Samsung Moment
Admin, feel free to move this if necessary.
+1.
has ANYONE got a fix for this pls?!?! my daughters are driving me CRAZY turning my GTab off...
Try Button Remapper: http://forum.xda-developers.com/showthread.php?t=850464
As for the reboot option in the power options, have a look at this then reverse the process: http://forum.xda-developers.com/showthread.php?t=811532
you could just get your daughters to not turn off your device...
That's really unhelpful.
I have this issue too - on an HTC desire running DevNull ROM. (Also happens with Oxygen - tried it.) http://forum.xda-developers.com/showthread.php?p=14709327
Please help!