[Humor] I dropped the A500 tablet!! - Eee Pad Transformer General

I was at BB asking about the EEE and decided to take a look at the A500. I held it, looked at a little, flipped it this way, that way. Now I have to say, I have ashy hands, not really tacky at all. So when I when to hold the tablet a certain way, it fell right out of my hands!! Fell to the floor and all on one of the edges and turned itself off. I gingerly picked it up and put it back on the shelve and walked out. Don't know if it started back up. I do know I won't be buying anything that just slides around in my hand.

I really hope Acer and Asus release cases SOON. Frankly I'm puzzled that they aren't sold on the same day, seems silly. My gTab never left the case I had it in, mainly because it was kind of slippery on the back and I was scared to drop it.

dfin13 said:
I really hope Acer and Asus release cases SOON. Frankly I'm puzzled that they aren't sold on the same day, seems silly. My gTab never left the case I had it in, mainly because it was kind of slippery on the back and I was scared to drop it.
Click to expand...
Click to collapse
Can't speak to Acer, but Asus' case is already in their distributor's system, so it'll likely be available alongside or reasonably soon after launch.

I'll second the slippery A500. That aluminum back could be hazardous, i'm typing on one now and it's definitely not as grippy as a rubberized surface like the Transformer is supposeed to have.

LOL @ the story.
I prefer rubberized/plastic backs due to not being slippery, not looking bad after being touched (streaks from fingers etc.), and no noise when setting it down, as well as no ice-cold temperatures when picking it up in the morning .
The aluminum backs are form and looks, vs. actual function... and the form/looks are just opinion/preference.

I have the first gen iPad and I've dropped it a few times due the slippery back. I keep it in the case at all times now. Should have just come with the $50 thing to begin with. Last time I pay the apple tax. No more dongles/required cases to type on when seated on the couch for me.

Related

Seidio Innocase (Black) $24.85 SHIPPED

emobileinhand.com has teamed up with Amazon and they're selling the Seidio Innocase for $24.85 shipped. I added Priority shipping and the total was $26.85. I bought my first Innocase from them but I got wasted on St. Patricks Day and broke it. The phone is fine, thank God.
The Seidio Innocase is hands down, THE BEST case for the Kaiser. The holster (strongly recommended) really keeps the device safe.
Right now, I'm using my Boxwave as a backup. I like it, but the belt clip forces you to wear it with the screen facing out which could lead to damage.
This is a great deal.
http://emobile-in-hand.amazonwebstore.com/search.htm?keyword=B0012Y4IQA
I have this case and imo its overpriced crap. The thing rarely stays on all the way. It seems there's always a corner or something to press down on again to get it to stay on it.
If you want a nice case cheap, just buy a cheapy. I bought one off Amazon for less than $5 and it stays on all the time never have to worry about it at all. The only difference is the holster and finish. The Seido has a nicer feel to it due some coating they put on it. And the holster for the cheapy is one of those screw on job's.
But hey if you want to spend $20 on a coating for something that will fall off, go ahead its on sale!!
Satisfied
I've used it for 2 weeks now and it stays on, feels great on hand, and haven't found any peeling of the rubberized layer.
I used to put on PDAir Aluminium for my SE M600 and it also go roughed up. So you can imagine my usage habit and this Seidio performs beyond my expectation.
Yea, I dunno man, I never have had a problem with my Seidio. You just have to make sure you have it on correctly. The boxwave is a very close second though. I wish Boxwave had a holster similar to Seidio's.
The great thing about the Boxwave is that it has a "notch" for the reset hole so it's almost impossible to miss and end up messing up your USB port.
-haze- said:
Yea, I dunno man, I never have had a problem with my Seidio. You just have to make sure you have it on correctly.
Click to expand...
Click to collapse
I don't know how someone could fit it on incorrectly. It only goes on one way and its pretty obvious which way that is.
My biggest problem w/the case is that if i slide that keyboard out it will knock off the bottom hinges.
IMO its not a secure case. Is it designed well as far as all the little notches and slots? Yes. Does it feel nice in your hand? Yes. Does it look nice? Yes. Is it worth more than $5? No.
Is this really much different to the 'crystal cases' that you can buy from the markets and crack after a week in your pocket?
Dont u dare!
Dont even think about buying this pathetic case. after much debate i bought this hoping it would protect my kaiser. i spent a week looking for the perfect case, went through everything i could find. i received the case, it snapped on easily, i hardly had an issue with the little hinges, the case lasted me a good 18 months. the rubberised outside is a nice touch, imo the phone doesnt look good with the case, but i stuck with it coz it protects your phone, right? well not quite. what the assholes at seidio dont tell you is that yeah they've rubberised the outside but done nothing inside the case. its plastic, which means after a couple of months you start to accumulate **** inbetween the case and the outside of the fone. ordinarily it might not be a problem, but if like me the fone spends most of its time in the back pocket, in bags etc then any grainy kind of crap between a plastic cover and a kaiser = ? you guessed it, major dents, scratches, gouges etc. i didnt check the phone for a good 3 months after i put the cover on, when i took it back off my phone looked like id rolled it down a hill and then threw it back up again. its ruined my kaiser and now i cant sell it on unless i buy another housing and put it on myself. it may be error on my part assuming that a protective case protects the outside of your fone, i dont know. this is my experience of this ****ty case, take it or leave. i think you'd be better off buying the cheapy crystal ones, coz then atleast you can see when your phone needs cleaning and you dont end up ruining it.
sorry for going on and on.
paradoox
Thanks for your feedback paradoox,
anyone else have similar long term reports?
On a separate note, i found out that Boxwave do a very similar (nearly identical) case and holster. Anyone handled both the Seidio and Boxwave for a comparison?
yep thats pretty much what i thought
paradoox said:
Dont even think about buying this pathetic case. after much debate i bought this hoping it would protect my kaiser. i spent a week looking for the perfect case, went through everything i could find. i received the case, it snapped on easily, i hardly had an issue with the little hinges, the case lasted me a good 18 months. the rubberised outside is a nice touch, imo the phone doesnt look good with the case, but i stuck with it coz it protects your phone, right? well not quite. what the assholes at seidio dont tell you is that yeah they've rubberised the outside but done nothing inside the case. its plastic, which means after a couple of months you start to accumulate **** inbetween the case and the outside of the fone. ordinarily it might not be a problem, but if like me the fone spends most of its time in the back pocket, in bags etc then any grainy kind of crap between a plastic cover and a kaiser = ? you guessed it, major dents, scratches, gouges etc. i didnt check the phone for a good 3 months after i put the cover on, when i took it back off my phone looked like id rolled it down a hill and then threw it back up again. its ruined my kaiser and now i cant sell it on unless i buy another housing and put it on myself. it may be error on my part assuming that a protective case protects the outside of your fone, i dont know. this is my experience of this ****ty case, take it or leave. i think you'd be better off buying the cheapy crystal ones, coz then atleast you can see when your phone needs cleaning and you dont end up ruining it.
sorry for going on and on.
paradoox
Click to expand...
Click to collapse
I had a similar experience as paradoox, bought it, thought it looked crap but left it on to protect fone, few weeks later discovered one of the little little tabs holding the top half of the case on snapped so it wouldn't stay on.. this is when i found scratches and dents under the case too. imo ... the case is just too expensive for how it performs... better to go thu 3 cheapies i think..
It all depends on your usage and carry habit.
I carry my phone on a leather pouch on my belt, with the Seidio snuggly fit on it, so it won't slip whatsoever.
It does make sense that some grits, etc. will get under the case, but I just opened it up 1-2 weeks ago and found nothing. Remember, I live in Jakarta, taking public buses and lots of fumes, dust, etc. around the air.
Of course it has to be also counted that I rarely open my phone in public (dusty, windy area) mainly for security reasons. I don't flaunt my belongings. I worked in an office building, and the phone is often out, but it's a clean environment.
Again, YMMV. For someone who wants no dust, I read somewhere there's a waterproof case for Kaiser ..
For my use, Seidio works great.

[Q] Does anyone have the leather pouch?

I love the look of the Galaxy Tab 10.1, and I take good care of my stuff so I don;t really need a think and bulky case. I saw the leather pouch on their webite, and thought it was perfect, since I just need something to protect it from bumps and scratches while carrying it.
Has anyone seen this, used it, had a hands-on with it? Does anyone own it?
Are there cheaper 3rd party ones?
Edit: This forum will not let me link to the pouch, but it is $29.99.
I had the book cover case on order but I ended up canceling it. I found a belkin case at best buy for $45 its thin doesnt add much bulk at all and it it folds into a stand. I just wanted something thin and easy to protect the screen. I'm not worried about dropping it.
I dont have the name or model number I left the box on my desk at work. I'll update later with the info. I couldnt find it on the belkin website or besbuy.
Funny thing the best buy employees didnt even know they had it when I went in last friday.
I bought the leather one that was right next to that one and I do not think it adds a lot of bulk to it but it def protects it and thats what is most important to me.
sgtmoody said:
I had the book cover case on order but I ended up canceling it. I found a belkin case at best buy for $45 its thin doesnt add much bulk at all and it it folds into a stand. I just wanted something thin and easy to protect the screen. I'm not worried about dropping it.
I dont have the name or model number I left the box on my desk at work. I'll update later with the info. I couldnt find it on the belkin website or besbuy.
Funny thing the best buy employees didnt even know they had it when I went in last friday.
Click to expand...
Click to collapse
galaxytabevo said:
I love the look of the Galaxy Tab 10.1, and I take good care of my stuff so I don;t really need a think and bulky case. I saw the leather pouch on their webite, and thought it was perfect, since I just need something to protect it from bumps and scratches while carrying it.
Has anyone seen this, used it, had a hands-on with it? Does anyone own it?
Are there cheaper 3rd party ones?
Edit: This forum will not let me link to the pouch, but it is $29.99.
Click to expand...
Click to collapse
Yep, I'm with you, I didn't want anything too bulky with so many flaps, etc.
I'm glad I bought the pouch. It's perfect and it's a tight fit. Just to test how tight it is, I held it upside down with the opening side down and the Tab didn't slide out at all.
I got the pouch, it was free since I was one of the first 200 at the launch on the 8th. I use it daily but I will be swapping it most likely for the book case by samsung when I can get it a bit easier.......I have a belkin leather one that is still unopened lol idk it seems a bit bulky
I have the Belkin folio stand. I only bought it because of convenience. My cat nearly jumped on to my tablet while it was laying on the couch, so I wanted something to protect it (and the Samsung case isn't available yet).
The fit is very snug, and it folds up to various viewing angles. It has a nice elastic strap that can be pulled around to hold it shut.
It is a _little_ bulky. The selling point on this tablet is the weight and thickness. That being said, the case weighs almost as much as the tablet. So, don't get it if weight is important to you.
Overall it's pretty nice. Probably a bit overpriced. When people want to play with the tab though, I always take it out of the case. It's so much prettier without it .
The Samsung Book Cover case just shipped and should be here by week's end. I'll keep you posted on it. Personally, I don't like anything that I have to keep pulling it out and pushing it in. I feel it's a matter of time before a scratch occurs.
Please do, I have belkin one and just don't love it. The Samsung one is back ordered again, and would like your impressions on it.
akarol said:
The Samsung Book Cover case just shipped and should be here by week's end. I'll keep you posted on it. Personally, I don't like anything that I have to keep pulling it out and pushing it in. I feel it's a matter of time before a scratch occurs.
Click to expand...
Click to collapse
Thanks for information on the cases, but I don't want a case anymore. I'd rather have a nice pouch or neoprene sleeve that will protect it from scuffs of traveling.
The thing is I don't want to spend $30 for a sleeve. I just want a nice sleeve that I can carry the Tab in, without breaking the bank. It doesn't have to be an "official" sleeve, as long as it fits, I don't care.
akarol said:
The Samsung Book Cover case just shipped and should be here by week's end. I'll keep you posted on it. Personally, I don't like anything that I have to keep pulling it out and pushing it in. I feel it's a matter of time before a scratch occurs.
Click to expand...
Click to collapse
yea I agree with your statement especially since I use the keyboard and media dock. they wont fit with any case what so ever.......I even tried to take the docking station part off again like the directions say to make more room but was still unable to do so lol
I have the suede pouch from sfbags.co
Originally for the replaced Xoom, it is a tight fit but works great.
They have a great service.
evb1 said:
I have the suede pouch from sfbags.co
Originally for the replaced Xoom, it is a tight fit but works great.
They have a great service.
Click to expand...
Click to collapse
Since the Tab is longer than the XOOM, does it pop out more? How durable is the sleeve?

A500 Abuse - what can it handle?

So what kind of abuse has you A500 taken so far?
The other night my 3 year old boy was standing beside me saying "daddy look" to which I replied "oh you're dancing that new dance you made up, very cool" but he kept harping on at me and pointing at his feet. After a few minutes of "yeah I can see you son" I finally looked over the coffee table at his feet and there is my A500 on the floor and the wee bugger is dancing on it. So far no problems, fingers crossed. so I'm now well impressed by the build quality.
I dropped mine while in the bathroom, fell on the floor and the case came open on one of the corners. Snapped it back in, but the corner got bent in a little so the shell doesn't fit completely flush. Can't tell by looking at it without closely inspecting it, but I know it's there and that bothers me enough. I have one of those TEP cases on it now so it's unnoticable.
irishmoe said:
So what kind of abuse has you A500 taken so far?
The other night my 3 year old boy was standing beside me saying "daddy look" to which I replied "oh you're dancing that new dance you made up, very cool" but he kept harping on at me and pointing at his feet. After a few minutes of "yeah I can see you son" I finally looked over the coffee table at his feet and there is my A500 on the floor and the wee bugger is dancing on it. So far no problems, fingers crossed. so I'm now well impressed by the build quality.
Click to expand...
Click to collapse
lmao........wow if that is something my 3 year old would do to me........While reading your story i was litterally thinking about my son dancing on my tablet by my coffee table. LIttle stinkers! LOL gotta love um though!
JiggaGeazY said:
lmao........wow if that is something my 3 year old would do to me........While reading your story i was litterally thinking about my son dancing on my tablet by my coffee table. LIttle stinkers! LOL gotta love um though!
Click to expand...
Click to collapse
I could have killed him but he was so happy thinking how great he was dancing on the tab
I hope I'll never know what it can handle But with a two and a half year old daughter and one year old son I fear I will... The other day my daughter dropped my wife's iPhone on the marble floor screen down (Murphy's law - works every time) so it's just a matter of time for the iconia.
Sent from my A500 using XDA Premium App
dropped mine down the stairs after i was balancing it on a pizza box and it slid off. Of course it was the beers fault.
Back came off, the rotation lock switch came out but it all clicked back into place - i have yet to try and put the auto lock switch back in.
The screen is fine and dandy, but as mentioned above...the back has not clicked back in smooth and has a few added extra curves!
I prefer my A500 to suffer from verbal, emotional and psychological as opposed to physical abuse
Having said that, I do think that the build is ok, my unit has got a little give in the plastic bit, but otherwise no complaints.
I think the whole.its aluminum and will be tougher then those made of plastic is incorrect. Plastic will bounce back or it will break. The metal bends and causes the tablet to not be together as well.there should have also been screws to hold the back on.With that said for me small hands I can hold the tablet easily and it does fell stronger then most.but I do not think it is.if you drop this device it.will have some damage.
Mine to has a corner bent and seem not as tight with creeling sounds from seams at top and bottom.
Acer should have made this device HOT PINK in color with deep purple floral designs
Giggles
My 3 year old daughter likes playing angry bird on it and if she can't kill the pig she throws it on floor but surprisingly nothing happened so far. I have never put any protective screen or any casing on it and still when i wipe clean screen it is same as when i bought it. Once it opened a bit from one corner but snapped back upon a little push and nothing more. So i can confirm that it withstands physical abuses much better.
usman3206 said:
My 3 year old daughter likes playing angry bird on it and if she can't kill the pig she throws it on floor but surprisingly nothing happened so far. I have never put any protective screen or any casing on it and still when i wipe clean screen it is same as when i bought it. Once it opened a bit from one corner but snapped back upon a little push and nothing more. So i can confirm that it withstands physical abuses much better.
Click to expand...
Click to collapse
Now that's some pretty harsh abuse
erica_renee said:
...
Acer should have made this device HOT PINK in color with deep purple floral designs
Giggles
Click to expand...
Click to collapse
You can always "SKINIT"
http://www.skinit.com/devices/ebook_readers/acer_tablet
~~~
UnicornKaz said:
You can always "SKINIT"
http://www.skinit.com/devices/ebook_readers/acer_tablet
~~~
Click to expand...
Click to collapse
I know I could.decal girl has some awesome designes. But then I would have to find something else to complain about.Giggles
I dropped mine on concrete twice on the volume corner and any have a tiny scratch
Mine was on my bed standing up in its case. I went to throw my TV remote onto the bed and threw it right at the screen. It was loud as hell but no damage.
Sent from my PC36100 using XDA App
msimindlessmsi2 said:
Mine was on my bed standing up in its case. I went to throw my TV remote onto the bed and threw it right at the screen. It was loud as hell but no damage.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Ouch you must have wanted to kick yourself
I often use my Iconia during office hour. So everytime my boss pass by, i will quickly cover it with A4 paper.
I thought i was smart to make it unnoticeable, until last week, when my fren was helping me to carry desktop monitor, i totally forgot that my tablet was covered with the paper, and i myself instructed him to put it on my desk, and he did..
He put the monitor right on top of my tablet without noticing my tablet underneath the paper.. its a 24" monitor.. jaw-drop..
seriously, i was expecting at least crack on the screen but luckily nothing happen to it.
So there's something to be said to all of the folks complaining about the weight of the Iconia. My iPad shattered from a 3 foot drop onto the sidewalk. This tablet is much tougher.
Sent from my Desire HD using Tapatalk
You all have been soo lucky!
Mine dropped from the couch one day, and no visible damage occured. The next night I charged it with my windows opened (it was a cool night, about 6°C). At the morning the glass was broken. The LCD screen and the digitizer are working well, but the cover glass ist splitted into two halfs; very bad.
It must have been a failure during assembly, some kind of tightness and the fall and the temparature changes finished my beloved toy off.
I was holding the tab loosely when I was on the escalator in the subway station. Suddenly a man rush down and knocked my tab down (~4 feet). A corner is scratched, but the tab is still functioning well.
Wow, you guys really abuse your tablets. I don't know what mine can take and I hope I don't have to find out!

Don't drop your transformer onto concrete...

I've had my TF101 for three months now, and the more I use it, the more I love it. Tried a few ROM's, got some games, watched some video I'd converted to HD mp4, played some old text based adventures. Spent time bonding.
The relationship hit a bump in the road yesterday. The Transformer fell out of its protective case (I shoulda closed the zip) and landed on the corner closest to the power button. The bezel popped away from the screen a little, there's an ugly dent, and now I can't use the power button. I push, pull & tweak it, but nothing happens, it either doesn't work at all, or locks on.
I've called Asus (in Sydney) and got an RMA number for it... guess I'll wait and see what happens. The warranty clearly states that it doesn't cover accidental damage or misuse.
Already having withdrawals.
PW
yeah sorry about your mishap man....sucks for sure!!!
i ve had my tf101 for about 2 and a half or 3 months as well and just about a week ago i had it pluged in and using it on my lap basically. thre fone rang and when i jumped up i fumbled the tab and it took a fall onto the stone infront of the fireplace. it hit on the tab and dock the corner by headphones jack and the corner by the docks sd card. Its dented and scratched in a few places but i got extremely lucky and even though it fell a good 4 ft and hit with some force it functions as intended still (knock, knock, knock) on wood.
surprised me really, seeing ive heard and seen so many people crack a screen from a 2 ft drop onto surfaces much softer than what mine hit.
i have an OG IPAD that i let the rest of the family abuse now, but when i had it i forgot it on the roof of my blazer one day and took off....At about 45 mph i looked in the rearview and watched as it hit the dirt road and bounced and slide about 30-40foot......OUCH!!!!....And it survived without a scratch the case was scuffed up a bit but that was it....
My Point is....basically these little things can be pretty tough really.
I got mine during the US launch, and had not dropped it ONCE since then ... until last week. Had it under my armpit in the Asus-branded rubbery case while toting a bunch of crap to my car. Forgot that it was under my arm when I opened the car door, and when I reached in the car to put my bag in, it fell from under my arm SMACK onto the driveway. I looked down in horror, tears welling in my eyes, quivering in terror (OK I exaggerate). Picked it up, and the only problem was the back had popped off a bit on one edge. Snapped it back into place, and all was right with the world. I was lucky that it fell flat, rear-side down, instead of on a corner I guess.
Squire-au said:
I've had my TF101 for three months now, and the more I use it, the more I love it. Tried a few ROM's, got some games, watched some video I'd converted to HD mp4, played some old text based adventures. Spent time bonding.
The relationship hit a bump in the road yesterday. The Transformer fell out of its protective case (I shoulda closed the zip) and landed on the corner closest to the power button. The bezel popped away from the screen a little, there's an ugly dent, and now I can't use the power button. I push, pull & tweak it, but nothing happens, it either doesn't work at all, or locks on.
I've called Asus (in Sydney) and got an RMA number for it... guess I'll wait and see what happens. The warranty clearly states that it doesn't cover accidental damage or misuse.
Already having withdrawals.
PW
Click to expand...
Click to collapse
After reading the thread title I was about to post a witty comment about not telling me what to do but then I dropped my transformer onto my wood floor. (karma, right?) and then I read the thread. Gosh that really does suck. Mine landed side-of-the-dock down first so my SD card shot out and got lost somewhere under the couch... I really hope they will fix it for you. From my experience Asus is really good with RMA stuff if you can talk with a real asus employee rather than their phone people and explain what happened. I had an amazing motherboard which shorted out after a month of use and they had stopped selling that exact model (sabertooth gx or somethng like that) so, instead, they gave me a better, more high end replacement for it. They also fixed my dock even though I lost my serial number (I had to pay for shipping but it was worth the 30 bucks). Like I said, good luck and I hope they don't charge you for the repairs
Squire-au said:
Don't drop your transformer onto concrete...
Click to expand...
Click to collapse
Sorry to hear about the problem, but this is just common sense...
****s happened!!!
I've dropped it on concrete from about 4 feet high.
Case took most of the impact but got a little dent.
Beside my cell phone the tf get handle a lot so sooner or later
it get dropped.
If the actual button isn't screwed up, you can probably insert a flat head under the bezel (easier in BACK!) and pry it up a little, and reseat the button (hold it with the button facing the ground) and pop the bezel back. Give or take the beds.
I'm really glad I don't have formica floors, or concrete...I keep mine in a backpack when on the go, just in case lol.
Sent from my Transformer Prime TF201 using Tapatalk
really sorry man.
got mine for a week now
i dont want to drop it
thats why i bought case and screen protector for it.
i love this thing way too much. i dont wanna break it
Dropped mine off the arm of the sofa onto carpet, it was docked and inside its neoprene case at the time. Result = screen cracked into 2 seperate peices
Guess its all down to luck in terms of damage done in accidents like this, mine is still useable but I thought the Gorilla glass would be much tougher.
Would be very interested to hear what happens with the RMA for the OP, I haven't dared contact ASUS uk for fear of the number of digits in the bill.
Had a similar incident with a happy ending
Squire-au said:
I've had my TF101 for three months now, and the more I use it, the more I love it. Tried a few ROM's, got some games, watched some video I'd converted to HD mp4, played some old text based adventures. Spent time bonding.
The relationship hit a bump in the road yesterday. The Transformer fell out of its protective case (I shoulda closed the zip) and landed on the corner closest to the power button. The bezel popped away from the screen a little, there's an ugly dent, and now I can't use the power button. I push, pull & tweak it, but nothing happens, it either doesn't work at all, or locks on.
I've called Asus (in Sydney) and got an RMA number for it... guess I'll wait and see what happens. The warranty clearly states that it doesn't cover accidental damage or misuse.
Already having withdrawals.
PW
Click to expand...
Click to collapse
I had the same incident 3 months ago. I dropped the transformer with dock in my office parking lot. It fell flat. When I pushed the power button it would not turn on. As it was an accidental drop I was sure ASUS warranty would not cover it. Still sent it to ASUS and was happy it was repaired under warranty.
Thank you so much for this warning, I was just about to try this with mine.
Low023 said:
Thank you so much for this warning, I was just about to try this with mine.
Click to expand...
Click to collapse
Stop flaming the OP ffs, he was just telling us what happens if dropped on concrete and how sturdy it is.. Jog on if you have nothing useful to say.
blickmanic said:
Stop flaming the OP ffs, he was just telling us what happens if dropped on concrete and how sturdy it is.. Jog on if you have nothing useful to say.
Click to expand...
Click to collapse
I dropped mine once in uni flew 2 meters across the room and was thankfully ok
I hve never dropped it again since or let it leave my sight so to speak
Sent from my Transformer TF101 using xda premium
Thanks for all the good wishes. I rang the service centre (Dingotech, cool name) and a very sympathetic young lady told me all I need to do to get it RMA'd. I told her what had happened, she didn't think it would be done under warranty. Ahh well. Anyways, I couriered it out to them, and they'll ring me with the quote sometime. NOT looking forward to it. So I'm forced to play with my old Advent Vega, with its cruddy viewing angles and bluetooth dropouts. I knew there was a reason I didn't sell it.
I'll keep you posted.
PW
Squire-au said:
Thanks for all the good wishes. I rang the service centre (Dingotech, cool name) and a very sympathetic young lady told me all I need to do to get it RMA'd. I told her what had happened, she didn't think it would be done under warranty. Ahh well. Anyways, I couriered it out to them, and they'll ring me with the quote sometime. NOT looking forward to it. So I'm forced to play with my old Advent Vega, with its cruddy viewing angles and bluetooth dropouts. I knew there was a reason I didn't sell it.
Click to expand...
Click to collapse
Yeah, they can hardly be expected to cover it. Your choices are either to buy insurance with accidental damage cover yourself, or just tell yourself that accidents happen, and when they happen it just means it's time for an upgrade.
I heard ASUS charges US$75 for the labor & bezel.
The same happened to my transformer. I dropped it on the corner and ruined the bezel.
However, I was able to hammer it out with a small ball peen hammer after carefully removing the bezel (which was a more difficult task than banging out the bends & dents).
It's very thin and flexible so I was just as easy to fix as it was to break.
After I put the bezel back on the only noticeable damage left were some scuffs on the metal from the fall. I just sanded them down a bit to smooth them out and it's good as new to me.
The entire process took about 15 minutes.
I once had my transformer in my bag (docked) with a steel water bottle. It was raining, and i went to jump over something, slipped, and landed on a pointy edge.
The aluminium water bottle was mangled but my transformer was fine (though i later realised that at full brightness, on a black screen there is pressure damage.)
I suppose it saved my back though.
Only dropped mine on to carpet (given, it was from four feet up), but no damage.
On the other hand, I just finished a screen/digitizer replacement for a friends iPad 2 - he had it under his kids stroller and it fell, only about two feet, on to asphalt when he went to load the stroller in to his car. The drop mangled the corner where it impacted and totalled the screen.
I hold onto mine like it's my child. I will never ever drop this... And now I'll be more careful because I probably jinxed myself.
Sent from my ADR6425LVW using xda premium
I dropped my onto concrete from about 6'. It damaged the bezel something fierce, but I have bent it back into shape. It could use some super glue to hold it into place a bit better, but I was pleasantly surprised that it is still 100% functional. My EVO 3D hasn't received nearly this type of abuse and is hardly usable.
I do agree though, don't drop it on pavement.

Has Anyone Returned Their 6P From The Fear of Bending?

It's on all of our minds. Maybe it's just a bad batch or maybe it's really real. Regardless, has anyone actually *returned* theirs just based off of fear?
Sent from my Nexus 6P using Tapatalk
that'd be pretty pathetic, imo.
we're adults, not children.
it COULD bend? so what? Do you retun your device because you COULD drop it and the screen smashes into 1000000 pieces?
Not on everyone's mind at all, certainly not mine. I just wouldn't ever put a phone of that size (no matter what make) in a back pocket for example where it would be stressed in such ways. In the UK you can't return it because something may happen anyway, so it would be a moot point. You could only return it within 14 days if bought directly off the internet under the distant selling rules.
My pencil MAY break the point. Let me return the whole lot of them and get some pens
I might break some wind, ....oh wait. No not on mind what so ever!
Definitely not. Considering what these devices are (hand held internet PCs) I am surprised people expect indestructibility. I wouldn't sit on my laptop or Surface Pro. Why would I sit my phone and expect nothing could happen?
When is this going to end? Just when I haven't seen anything on bending for a week or so, up pop's a post about it in some form or the other. I can not imagine after using this phone for 2 months that it will bend unless its done on purpose or as some say in this thread left in a pant's pocket and bent that way. If the fear is so great, lock yourself in a room and stay away from all large size phones.
My device is slightly warped though I literally took care of it. I always held it in my front left pocket without anything else inside. I wear regular jeans and also use a Spigen Rugged Armor. I might try to RMA it though if the area around the volume buttons will be damaged sooner or later.
Did the rugged armor warp your frame? I just ordered that same case yesterday....
I didn't return 2 of them because of fear of bending. I returned 2 of them because they were bent.

Categories

Resources