Right, so today I tried the emergency call function and noticed that dialing numbers there sound different, much like an old-school phone or mobile. Any idea where these sounds are located, and how to replace the original dialer sounds with it?
If you don't know what I'm talking about, go to emergency call and push few numbers. You hear a different sound then in normal dialer. That's what I want to port.
check /system/media/audio (with root explorer) i think it should be there
>>>>>>>>>>>>>>>>>>>>>>>>>
POX v.1.0 beta 2 released! be sure to try it out :]
<<<<<<<<<<<<<<<<<<<<<<<<<
GreeModding from finland :]
Yes I checked but the sound wasn't there.. only the normal dialer's were there (Waterdrops.ogg).
Where should I look next? Find the apk of the dialer, maybe It's in there?
Related
Some registry tweak or something?
weenter said:
Some registry tweak or something?
Click to expand...
Click to collapse
You just want the ringer to RING without any other indication of an incoming call?
or
U dont want an INCOMING CALL ALLTOGETHER?
I gather it is the Former coz In the latter simply turn On <flight mode>
U can also set the device to recieve calls without Ringing by setting it to Pick up after <zero> calls.
Using a handsfree here would be an advantage.
U wont Miss any call.
I just want the ringer to RING without any other indication of an incoming call. Is it possible?
weenter said:
I just want the ringer to RING without any other indication of an incoming call. Is it possible?
Click to expand...
Click to collapse
i'm also looking for a way to do this
Did anyone found a solution for this ?
texarcana said:
Did anyone found a solution for this ?
Click to expand...
Click to collapse
I doubt it... Seems kinda pointless, having the ability to tell you who is calling, but then deliberately turning it of..
yes, but when someone is calling, there is always a delay.
When you hear the first ring, the caller already heard it twice.
Maybe by disabling this, it would speed up the process a bit
texarcana said:
yes, but when someone is calling, there is always a delay.
When you hear the first ring, the caller already heard it twice.
Maybe by disabling this, it would speed up the process a bit
Click to expand...
Click to collapse
That's the network, not the device.
It can't be the network, I never had this problem with my Nokia phones.
I personally think it's a flaw in the dialer application or in WinMobile itself.
texarcana said:
It can't be the network, I never had this problem with my Nokia phones.
I personally think it's a flaw in the dialer application or in WinMobile itself.
Click to expand...
Click to collapse
Well... The cause may be that, but I doubt showing a caller ID screen will change the times....
texarcana said:
It can't be the network, I never had this problem with my Nokia phones.
I personally think it's a flaw in the dialer application or in WinMobile itself.
Click to expand...
Click to collapse
I agree with texarcana here, the lights begin to flash on my phone when it rings a good few seconds before the screen get around to displaying the incoming call notification.
This is on WM 6.1, on my new HTC Diamond Touch.
I assume that notifications such as an incoming call or text message are either
A) A windows message sent to a background service awaiting it.
B) An application is executed with parameters describing the event
In either case, i believe it must be possible to redirect the notification in the registry. However, if the notification method is at fault (ie causing slow response, most likely to be true if B above is true.)
I'm going to investigate, I'll post an update of my results.
Im really sorry to bump this really old thread but has anyone solved this?? I would like to disable the incomming call notification too.. cuz I just added a full screen caller ID, but the damn notification pops up and covers the photos of my contacts.. so whats the point of the caller ID if i, not gonna be able to see the pictures
well i know its in Hkey_curent_User\controlpanel\notifications\phone
but im not sure how to disable it...
or even more important (for me) only disable it for a certain #...? thanks! anyonbdy
To Diamond I found. cab which options are unblocking "flash light for." in SOUND & NOTIFICATION it didn't give but nothing. I dug around in the HKLM/Drivers/Builtln/Keylight and Keypad register and I turned off LED generally speaking but I blocked buttons
first you'll need a registry editor, then edit the following key:
HKCU\ControlPanel\Notifications\Phone
Duration=1
change the 1 to 0
im not sure if this is exactly the fix you were looking for. its intended for stopping he default caller id bubble from blocking fullscreen caller id apps like s2u2.
hustlehard82 said:
first you'll need a registry editor, then edit the following key:
HKCU\ControlPanel\Notifications\Phone
Duration=1
change the 1 to 0
im not sure if this is exactly the fix you were looking for. its intended for stopping he default caller id bubble from blocking fullscreen caller id apps like s2u2.
Click to expand...
Click to collapse
thanks, works for my htc pure with phonex
hustlehard82 said:
first you'll need a registry editor, then edit the following key:
HKCU\ControlPanel\Notifications\Phone
Duration=1
change the 1 to 0
im not sure if this is exactly the fix you were looking for. its intended for stopping he default caller id bubble from blocking fullscreen caller id apps like s2u2.
Click to expand...
Click to collapse
this will make the bubble of incalling to disappear??? if not who can i do it
hustlehard82 said:
first you'll need a registry editor, then edit the following key:
HKCU\ControlPanel\Notifications\Phone
Duration=1
change the 1 to 0
im not sure if this is exactly the fix you were looking for. its intended for stopping he default caller id bubble from blocking fullscreen caller id apps like s2u2.
Click to expand...
Click to collapse
Didn't work for my samsung i760, what about DispllayOrder? Set it to 0 too? Or what would that do exactly? I'm curious now, it's set to 1 so if all else fails, I could change it back to 1 again... I guess. I'd just like to know first before I go blindly jumping into something.. haha
Sidenote setting it to 0 did work I just had to reset my phone so remember to reset your phone after changing this, I see the curtain try to popup, or at least the frames but nothing after that... Although sometimes it does act buggy and I'll completely miss or be able to answer a call cause my phone will constantly viberate (No pickup on ringtone at all starting) then after the call is missed the viberating will stop but my phone will still be frozen... Thats when the screen is off though..
Okay after a few tests sometimes it does work and sometimes it doesn't work at all and the curtain will still show up... Then again screen off sometimes the phone wont ring at all, I'm setting it back to 1... LoL
I just wish there was a way or a more advanced notification manager, it should be just like being able to disable incoming text messages and disabling sent message notifications..
____
I'd love a fix for this too, as I already have a picture caller id with PocketX Photo Contacts Pro...
But it's annoying as all get out!! To put it politely, I slide to answer then I've got to press the left softkey too! In order to answer a call, if I could just disable the built in windows mobile caller id curtain then it'd be a heck of a lot easier...
Please let's get a scripter on this to start working their way around and tweaking it to be able to be disabled..
Thanks!!
________
As for ring delay which is also a few other posters concern of the phone taking it's own sweet time to decide when to start ringing... This is what I used for my i760, I'm sure someone here could turn this into use for any phone make and model:
Ring Time Limit Fix:
**772 [service code]
six zeros for the code (000000)
Scroll down with the d-pad till you see end of basic nam
hit right d-pad to change "exit" to "more"
hit middle d-pad to select
hit the down d-pad 76 times till it says slot cycle index
Change this to 1 or lower EDIT: By entering the value with the number pad and then you hit the middle d-pad to exit.
This changes the frequency at which the phone talks to the tower and will
start the unit ringing MUCH faster. the lower you go the faster but the more battery it uses. I find 1 gets the phone ringing within 3 seconds but doesn't hinder battery life.
Click to expand...
Click to collapse
I've got mine set to 0 though, but then again, I don't get very many calls, plus I have my phone charging a lot. Also I always carry around a spare extended fully charged battery in my holster... Usually my battery lasts a whole day... But with it set to 0 my phone picks up and rings at the end of the first ring on the callers end.
...it seems, if I use the Fit4Cat tweaker to turn off the skinning of the phone, the t-mobile dial pad goes back to being normal windows-look one, but the smartdial no longer works! If i choose the menu option, nothing happens and typing part of a number in doesnt do a contacts lookup. Does anyone know what went wrong?
I don't know the why's and where fores but I hear you on the ugly TMobile Dialpad.
I used one of THESE (the reptile_red one) to change thedial pad and I still have smart dial functionality.
Is it only me?
I'm coming from WinMo only phones. I owned a lot of them, the last being the Touch HD. I was so used to press the "green" key to access the dialer and look for a contact using that mixed numbers/letters phone keyboard.
On Nexus One, I select "phone" shortcut on my homescreen and I get the dialer. But if you push buttons on that keyboard, you only get to dial that number (no contacts lookout, matching what you have pressed). So you have to go to Contacts or Favorites to select someone you want to call (too many operations to not get annoyed )
Is this a normal behavior on Nexus One? Or am I doing something bad?
I made a movie to see what I am talking about (not a native English speaker).
Movie 1
The second movie is made showing what I am talking about using a Market application I found: SuperDial. It works as expected, but still I am confused why Google didn't make this a default (I see this on every phone)
Movie 2
Thanks for any suggestions.
Alin.
On the N1, you can press the "search" button at any time and begin typing a contact's name, and they should pop up as a top result. Alternatively, you can hold the Search button, and simply speak your contact's name. I find this to be the easiest way.
Yes, I've seen this, but it gets more general results, not only contacts. Also, after you find a contact that way, you click on it and it won't dial directly. You still have to select what to do.. not that fast ...
I'm not an American/Englishman and nor my contacts are , so speaking names is useless. Last try was: "Alex Axon" and the phone undesrtood "alex sucks own" .. you got the idea
Thanks for answering anyway. Are there other methods?
You can install aContacts from the market. It does what you want and very configurable. Unfortunately android stock dialer doesn't support T9.
Thanks.. will try that also. As I mentioned, I already found some replacement for my issue.
The question was: is this normal behavior for the default dialer? Or am I doing something wrong?
It looks plain stupid to open an application (Phone in Nexus case) always on a tab that nobody uses (dialer with this behavior). How many times someone will dial a number directly instead of using a saved contact?!? At least the application should remember the last tabs it was in: Favorites, Call Log or Contacts... Dialer is plain useless most of the time with this implementation
alithenake said:
Thanks.. will try that also. As I mentioned, I already found some replacement for my issue.
The question was: is this normal behavior for the default dialer? Or am I doing something wrong?
It looks plain stupid to open an application (Phone in Nexus case) always on a tab that nobody uses (dialer with this behavior). How many times someone will dial a number directly instead of using a saved contact?!? At least the application should remember the last tabs it was in: Favorites, Call Log or Contacts... Dialer is plain useless most of the time with this implementation
Click to expand...
Click to collapse
This is how mine reacts as well. There's another "application" called "Contacts" in my tray (it also started out on my desktop but I've removed it) which takes you to the same four-tab screen but starts on the "Contacts" tab. This sounds like it would be perfect for you if you used it instead of "Phone."
I also really miss the smart dailer (I think that's what they called it) on the Windows Mobile phones. I'm amazed that it wasn't implemented in one way or another in the stock dialer since it's been in the WinMo phones since forever.
I remember trying out some apps in the market that emulated the smart dialer. On is called SuperDial and the other was Star Contact. Both looked too ugly for me to use, though.
alithenake said:
On Nexus One, I select "phone" shortcut on my homescreen and I get the dialer. But if you push buttons on that keyboard, you only get to dial that number (no contacts lookout, matching what you have pressed). So you have to go to Contacts or Favorites to select someone you want to call (too many operations to not get annoyed )
Click to expand...
Click to collapse
I also wanted to point out that at this screen, you can long press "Menu" to bring up the soft kb, which you can begin typing contacts with.
kozm0naut said:
I also wanted to point out that at this screen, you can long press "Menu" to bring up the soft kb, which you can begin typing contacts with.
Click to expand...
Click to collapse
That's something cool I never tried, but OP wants to dial immediately after tapping on the contact's name. Doing it this way would be the same as hitting the magnifying glass while in the dailer/contacts app, which brings you to the contacts page where you'd have to then tap on the number you wish to dial. On Windows Mobile, after you T9 the contacts name into the dialer, you can select them and it'll automatically dial the contacts default number, which was very useful.
if you say "call" before the contact's name when using voice input, it will default to dialing them.
aContacts actually do the job really, but really well. It replaced my Phone application from this moment on.
SuperDial was good also, but ugly looking.
kozm0naut said:
if you type or say "call" before the contact's name, it will default to dialing them.
Click to expand...
Click to collapse
Where do you type "call"? OP can't use voice dial because he's not from an English speaking country.
you type call on the keyboard as far as I understood, just before entering contact name.. but the process is long in my opinion...
I'm a bit lazy myself
EDIT: tried to enter contact using keyboard on Dialer.. and nothing happens, contact is not found, and dialer just starts dialing the corresponding key number
alithenake said:
you type call on the keyboard as far as I understood, just before entering contact name.. but the process is long in my opinion...
I'm a bit lazy myself
Click to expand...
Click to collapse
It doesn't do anything... I type "call John" in the search box and my contacts don't come up.
Yeah, I edited my original post. I only had the misinfo in there for about 30 sec. Jeeze, you guys are fast
it's been my problem for so long.
iphone doesn't show the number of a caller or dialed (it only shows the saved name)
I wanted this on my galaxy phones for long.
full screen caller ID is an option but it make a lot of problems.
is there a way to tweak it?
or is there a mod that I can use?
for example:
now the number and the name shows:
John
12345678
what I want is to show only the name:
John
please help me
my current phone is galaxy note 3, soon note 4
omid_freesky said:
it's been my problem for so long.
iphone doesn't show the number of a caller or dialed (it only shows the saved name)
I wanted this on my galaxy phones for long.
full screen caller ID is an option but it make a lot of problems.
is there a way to tweak it?
or is there a mod that I can use?
for example:
now the number and the name shows:
John
12345678
what I want is to show only the name:
John
please help me
my current phone is galaxy note 3, soon note 4
Click to expand...
Click to collapse
The default dialer app does not have any option like that.
You may need to search for 3rd-party dialer.
vndnguyen said:
The default dialer app does not have any option like that.
You may need to search for 3rd-party dialer.
Click to expand...
Click to collapse
dialer does not effect the incoming and outgoing calls. actually I never use samsung's dialer.
there should be a mod or something that we can change it. we can all call recording, we can replace buttons. we can change the theme, why can't we change this too?
omid_freesky said:
dialer does not effect the incoming and outgoing calls. actually I never use samsung's dialer.
there should be a mod or something that we can change it. we can all call recording, we can replace buttons. we can change the theme, why can't we change this too?
Click to expand...
Click to collapse
Ok I see.
Actually I mean the Phone app.
So if any modification, it should be done with this Phone app.
I just want to hide the number when I already have the name.
just like iphone does.
it should've been available by default.
Hi, I cant seem to change the stock dialler to Truedialer, when I try to make a call it only gives me 2 apps to choose as a dialler, stock and Skype, does anyone know how to get this changed ?