I recently rooted and installed the Bi-Winning V2 rom for my vibrant. One thing I've noticed is SOMETIMES (quite often, but not every time) when I dial a number to make a call, ill hear a quick 2 beep notification and then the call starts ringing normally. What is this double beep??? I am not using any *67 or other *codes when dialing.
I get the same too. I think it has something to do with call confirmation. Beeps when your call went through successfully...i think
You can turn that off in call settings.
Go into settings, then "call settings"->"All calls"->"Call status tones" and unselect "Call connect tone".
Related
Hi,
Can someone tell me how a can redirect a incomming call to the mailbox when I don't want to answer that call?
I only can decline the call and then the caller gets a busy tone and know that a pushed the call away....
Settings>Phone>Call Forwarding>Get Settings...
Make sure "No Answer" is ticked and diverts to your mailbox number.
elyl said:
Settings>Phone>Call Forwarding>Get Settings...
Make sure "No Answer" is ticked and diverts to your mailbox number.
Click to expand...
Click to collapse
Thanx for your help, but that one I know... :lol:
What I want is to stop the phone ringing and push it to the voicemailbox!
Now I have to wait 30 sec before the call is redirect to the mailbox...
In conjunction to "elyl's" suggestion, if you don't want to hear the phone ring, then turn the volume off. Otherwise you need a 3rd party software like Phone Alarm.
zerimar said:
In conjunction to "elyl's" suggestion, if you don't want to hear the phone ring, then turn the volume off. Otherwise you need a 3rd party software like Phone Alarm.
Click to expand...
Click to collapse
but sometimes you just don't wanna talk to a person that is calling you... and I don't mean because I'm busy or something just push it away to the voicemail.
I use Phonealarm but it didn't give me the option when the phone rings (with a certain person I don't wana talk to) push it to voicemail!
So now I leave it ringing and then it goes to the mailbox at last.
I've just tried it on my Magician. If you press the red/end button right after it ring then the call is redirected to the voice mail.
hmmm, when I push the red button it gives a busy tone to the caller...
Thanx for trying
do you have the other call divert (when busy, when out of range, etc.) functions active?
Must be an operator-dependent thing then, cos when I reject a call it gets sent to the mailbox. Dial into your mailbox and see if you can change the settings.
zerimar said:
do you have the other call divert (when busy, when out of range, etc.) functions active?
Click to expand...
Click to collapse
Yes when I don't pick up or when the phone is off it go's to the mailbox.
this is for you......good luck trying to get it to work....i didn't have much time (spend about 1hr trying to get it to work)
http://www.winmobileapps.com/device/pocketpc/csb/csb.aspx
Finaly it is working!!
I just re enterd the voicemailbox number and send it again to the telecom provider.... :?
Thanx again for your help and testing...
great to know that you have it finally working
One day I learned (by accident), that if you use the hardware volume button while the phone rings, it will mute the ring tone. That way, you can let it "ring" in silence for the duration of the 30 seconds before it forwards to your voice mail.
I use the vol down in these situations, but I think it also mutes on vol up.
Sometimes my phone turns on, displays call ID, and even rings via bluetooth, but it won't make an audible ring. I know that all volume settings are correct because afterwards my missed call sound plays.
Any ideas what is going on or how to fix it?
Hi, I get this too occasionally - all of a sudden I will get a voicemail message and the phone did not ring. then a few mins later I may get another call and it rings as normal...
I am running ringo, so if you are as well that might be the problem.
no matter what ringtones i use they only ring for 17 seconds is there a setting or way to alter this.
and how can i silence an incoming call. id like the option to answer the call or press a silence button so the other caller still
thinks the call is ringing and that the call has not just been rejected.
thanks
lancsuk said:
no matter what ringtones i use they only ring for 17 seconds is there a setting or way to alter this.
and how can i silence an incoming call. id like the option to answer the call or press a silence button so the other caller still
thinks the call is ringing and that the call has not just been rejected.
thanks
Click to expand...
Click to collapse
Sounds like your calls get diverted to voicemail after 20 seconds (takes approx 3 seconds for the phone to ring on an incomming call). Setting your divert can be network dependant, but if you go into phone settings, there is an option called "divert" which yoy can change. Be warned - if on vodafone or other similar networks, the network handles the call diversion. However if you change this, you may be charged for the phone diverting calls to voice mail.
To mute the phone on incomming call, simply turn the phone face down on the desk. This should mute the ringer. If this does not work, you need to install HD Tweek or similar to set this option.
yes mate your right my phone does get divertd to voicemail but i was getting 29 seconds i think it was on my nokia n95 when that was set to divert. on orange you cant set divert on or of by the phone you have to ring the network but cancel divert.
as for the silence calls on flip if i have the phone in my pocket and someone calls the flip does not work as i have no surface to lay it flt on i just tried it .
so if anyone else has no solution the only thing i can think of is
1 cancel call divert with my network and hope there is a third party software that can manage my voice mail . any recommendations ?
2 any recommendations of any software to silence calls by press of a button ?
thanks
ok i managed to get the ringtone to ring longer before it goes to voicemail .
the settings for that are acually in the phone ardsar says but how can i get the
phone to silince callls without turning the phone over .
im looking for a press of a button method.
thanks
Press one of the volume buttons when your phone is ringing
blimey so easy eh when you know how .
cheers mate appreciated
or you can dial this number
**61*insert your voicemail number here*11*30#
if you then hit the call button and enter this your phone will ring for 30 seconds before going to voice mail.
cheers
Hi,
I have a problem with incoming calls, it happened 3 times already. A call is incoming, phone rings, I answer it.
I hear a second or two of the other person's voice, then I hear constant buzzing sound (or no sound at all). When I try to disconnect, the phone app goes off like it was disconnected, but the top bar icon "in a call" is still there. Then I can't make another call, disconnect this one etc. If I want to call that person back, I have to soft reset the device.
Did anyone of you encounter such a thing?
Anyone else experiencing this problem?
I cannot click back over to the original call when using call waiting. I get the notification when I am on a call, that a second call is coming in and I get the options (ignore, send to voice, or answer). If I answer, I am never able to switch back over to the original call after I am done. Any ideas?
n my phone when I receive another call I get the options to "Answer", "Ignore", "End and Answer"
If I answer the banner at the top displays the current caller's name and call time but gives an option to "Tap to Swap".
This is what SHOULD be there emphasis on should.
Whenever the second phone call ends, I have to press the drop-down menu and take the first call off "Hold". It's really annoying and should automatically occur once the second caller hangs up.
Odd. Mine just switches back over automatically.