Related
Hello Guys
I have a UK Sony Xperia Play which was rooted- using the rooted 2.3.3 kernel Originally and was updated by sony from 2.3.2 to 2.3.3 which worked ok before I rooted the device.
I then decided to use another members rooted firmware which worked - Please see here :- http://forum.xda-developers.com/showthread.php?t=1145729
I wanted to reflash to with 2.3.2 which worked then I did a sony update again over wifi and after that I could not boot the phone at all it just vibrates nothing happens - no boot logo- I have reset the phone by taking the battery out and it is fully charged and it does work in flash mode but when I try to reflash the rom again it using flash-tool and stock firmware the software says it has been done but does not boot. Any thoughts on why this is.The Bootloader has been unlocked previous to root
Thanks
Mark
You've unlocked your bootloader AND updated Over The Air?
Yea he has an unlocked bootloader... There are countless threads warning you not to update over wifi or 3g if you unlocked bootloader... =( try the development forum to see if you can get it unbricked
Sent from my R800i using XDA App
Hi there yes I have unlocked the bootloader the 1st time before I started do u think I should unlock the bootloader again well go through the motions but I cant fastboot blue its stuck in firmware updater green all the time I think its bricked thanks fir your comments I have tried most solutions in the forum without success
Sent from my GT-I9100 using XDA App
Hey guys just got the solution from the developers forum bin4ry freexperia unbrick solution I am happy now
Regards
Mark
Sent from my GT-I9100 using XDA App
Be careful what ever you do because you can destroy your radio if you use the wrong fix.
I have not had your problem but I believe there is a fix binary made as long as you have done nothing to the phone since you bricked it
Edit: /\ lol a little slow I guess /\
Sent from my R800i using XDA App
Glad it worked out for you, sorry I couldn't copy and paste the link for you to unbricked you phone since I'm using the xda app on my play
Sent from my XPlay using XDA App.
Hi
I had the same problem with my xperia play (R8000i), after upload over wifi, my xperia play doesn´t work. i can´t do the fastboot neather the battery charge.
I already made the FlashTool with: R800i_4.0.A.2.368_World.ftf and Xperia Play_Release_Generic UK.ftf
The FlashTool Works successfull but xperia play don´t boot.
Someone here already have the solution for that?
Thanks
I have the exact same issue, what's the fix?
EDIT: OK, rather than start a brand new thread I thought I'd just reply here.
Basically, I unlocked and bootloader of my phone and rooted it ages ago, and totally forgot the dire warnings about OTA updates. I spotted someone on here mention that they'd installed an OTA update on a rooted phone and decided to do it, as I've noticed that my Play is really buggy of late.
Of course, this has bricked my phone. When I press the power button the phone just vibrates, and if I hold it in, it vibrates every few seconds.
I've tried plugging the phone into the PC in recovery mode (holding down back, green light comes on) but my PC says I need an S1boot Download driver (which I swear to god I already have, I think I needed it to unlock the bootloader in the first place!). I've followed all instructions, downloaded the drivers and pointed the installer in the right location but I keep getting a message that says the hardware cannot be installed.
I'm running Windows XP, by the way. Can anyone help a foolish soul?
S1Boot Download issue solved: http://forum.xda-developers.com/showthread.php?p=17497338#post17497338
OK already have this driver installed and can use the FlashTool normally, but the Xperia play does not start, and I can not put them in the way fastboot mode.
When I press the power button the phone just vibrates, and if I hold it in, it vibrates every few seconds.
I have used the PC Companion and Update Service did not work
Does anyone have a solution?
You need to wait for the prompt to connect your phone in Flashtool. When prompted, you have to hold down the 'back' button when you plug in the USB cable. The power light should go green to indicate the phone is in fastboot mode.
Had already done this process.
I already made the FlashTool with: R800i_4.0.A.2.368_World.ftf and Xperia Play_Release_Generic UK.ftf
The FlashTool Works successfull but xperia play don´t boot.
You need to flash the special unbrick tft, it's on the forums somewhere
Fastboot = BLUE light (search button+usb). Used to flash/boot with fastboot commands from a cmd window on a pc/laptop and such.
Flash mode = GREEN light (back button+usb). Used when flashing with flashtool.
Regards Dousan...
Duddyroar thanks
But I did a search on forum and did not find the file tft unbrick.
You could put the link?
Mr_Taser said:
Duddyroar thanks
But I did a search on forum and did not find the file tft unbrick.
You could put the link?
Click to expand...
Click to collapse
I think he's talking about this one by Bin4ry:
http://forum.xda-developers.com/showthread.php?t=1126354
Regards Dousan...
Thanks to everyone who helped.
The phone back to start normally.
Thank very much
Hi,
I've been lurking in the forums for a few months now, and have found them incredibly helpful.
First things first. I have an xperia play from Rogers in Canada. It is currently updated to 2.3.3 (via the seus tool) but not rooted.
I am trying to flash my device with the free xperia project image http://forum.xda-developers.com/showthread.php?t=1128216, but i have run into some problems.
I have downloaded the image and can get the command prompt to show up. It sits at "waiting for device"
I try to get the device to go into "flash" mode by holding down the back button and inserting the usb. I've been looking around the forums here and some people report that this mode is indicated by a flashing blue led on the power button. My power button turns (and stays) a solid green and the "waiting for device" message never goes away.
I have tested the "flash" mode with the official Sony update tool found http://www.sonyericsson.com/cws/support/mobilephones/downloads/subject/updateservice/xperia-play?cc=ca&lc=en and it seems to be working fine. It detects the device, tells me the software is up to date, and offers to wipe and re-install a fresh copy of the OS.
What am I doing wrong? I would like to install the free Xperia project, mostly so i can play with overclocking my cpu. Any help would be appreciated.
If it's any help I also can't seem to flash with flashtool either.
Thanks!
If you want it to go blue, you have to hold the search button, not the back button. That Should solve it
hm.. I guess you need an unlocked bootloader.... but I'm not sure..
Thanks,
I tried the search button. All it does when i plug it in holding the search button is to bring up the Sony Ericsson splash screen, and then the power button goes orange.
Is it possible that I need an unlocked bootloader? I think I read somewhere that the bootloader on the Rogers play is locked down and has not been cracked yet.
Need it unlocked
Sent from my zeus using XDA App
And at this time there's no way to get it unlocked with a simlocked phone?
Because I guess i'll have to wait for that, or for someone to crack 2.3.3/4 so i can at least re-root my device.
Grizzlepaw said:
And at this time there's no way to get it unlocked with a simlocked phone?
Because I guess i'll have to wait for that, or for someone to crack 2.3.3/4 so i can at least re-root my device.
Click to expand...
Click to collapse
you cannot issue fastboot commands "fastboot erase, fastboot flash. fastboot boot, ect" without an unlocked bootloader, i know its a pain but there is no way around it atm, im sure the dev scene on xda will have a work around for you soon
And at this time there's no way to get it unlocked with a simlocked phone?
Because I guess i'll have to wait for that, or for someone to crack 2.3.3/4 so i can at least re-root my device.
Click to expand...
Click to collapse
or you can do that if you really want root : http://forum.xda-developers.com/showthread.php?t=1119074 or http://forum.xda-developers.com/showthread.php?t=1116090
I tried doing that but I couldn't get flashtool to see my phone (I was using the new beta version)
*edit*
(i tried it both on win7 32 bit and win7 64 bit)... maybe i need to do some driver kung fu?
you can use seus? if yes, you have the drivers ( I guest )...
And it work like seus, same button to hold... what is the version of your phone? R800a, R800i?
the "about phone" says that it is an r800a
I do the same thing (hold the back button and plug in the usb) with flashtool but it doesn't see the phone and start the flash (the regular sony update program does.)
So i replaced the drivers that the sony update tool installed with the drivers that came with flashtool. (in device manager i uninstalled sony xperia play and manually replaced them with the files in the flashtool\drivers folder)
I was then able to use the UK image via flashtool to roll back to 2.3.2, root, and then update.
I still can't install FreeXperia (or maybe i just can't think of a way how)... but i have current version 2.3.3/4 and it is rooted.
Thanks guys!
How do i rescue my bricked phone!
Click to expand...
Click to collapse
well the answer lies within this thread.
how do you brick a phone
well, there are many ways you can brick a phone.1. you install the wrong software
2.you install a 'broken' rom
3. you install a recovery that isnt supported for our phone
4.or you were messing with your bootloader
etc etc... you get the point
how to rescue a bricked x81st: If you have done a soft brick then you can boot into xrecovery and restore your latest backup. easy
2:if restoring doesn'twork or you have a hard brick then you should either launch:SEUS (sony ericsson update service) or pc companion. click update and follow the steps.
3:if none of that works then you will have to send it off to se. if you dont get some kind of phone company to fix it then its as useless as a real brick lol or a replica of a phone.
3:you can use a flashtool to fix it as well. if you open flashtool you usally get a number of options such as unlock bootloader etc. there should be an option where you can restore it. (lol i think)
Cheersi hope it helped. if it did then please do press the thanks button.
-wilbso
Soft Brick is the common brick we get.
Hard Brick is a brick you can only get with messing with the bootloader. There's no complete brick.
Say something about flashtool too.
Chris95X8 said:
Soft Brick is the common brick we get.
Hard Brick is a brick you can only get with messing with the bootloader. There's no complete brick.
Say something about flashtool too.
Click to expand...
Click to collapse
ok. besides the complete brick is what i call doomsday. thats just my own little thing lol. and yes i will metion 'bout' the flashtool too
how about hard brick??
X8
I bricked my phone while a opened bootloader.Phone was not recognized SIM and i havent data connection too.SE PC repair does not helped me,backup file as well.Only helpful tool was S1Tool with "restore" button.It fixes my phone and i opened bootloader again with success!
Thanks for developers!!!
X8;OPENED BOOTLOADER;nAa kernel;DUAL TOUCH;GINGERXPERIA V17 2.3.7
montekristo said:
I bricked my phone while a opened bootloader.Phone was not recognized SIM and i havent data connection too.SE PC repair does not helped me,backup file as well.Only helpful tool was S1Tool with "restore" button.It fixes my phone and i opened bootloader again with success!
Thanks for developers!!!
X8;OPENED BOOTLOADER;nAa kernel;DUAL TOUCH;GINGERXPERIA V17 2.3.7
Click to expand...
Click to collapse
Quite a few people repaired their phones with s1 tool. Iv never actually hard bricked my phone. IV done soft brick> bootloop but I fixed that be restoring a backed in xrecovery so these replies I
Getting are quite helpful. As long as your phone is repaired everything is alright.
sent from my x8 running gingerdx
Hello, can you please help me! I bricked my xperia neo, while trying to update se tweaked rom v 8.5. Now i'm facing the "sony ericsson" screen, totaly blocked. I've tried many times to flash it, whith wotan client, flash tool, but it's imposible to enter flash mode again, no green led, only bocked se screen, please help!!! how did you manage o get into flash mode?
benga_mircea said:
I bricked my xperia neo, while trying to update se tweaked rom v 8.5. Now i'm facing the "sony ericsson" screen, totaly blocked. I've tried many times to flash it, whith wotan client, flash tool, but it's imposible to enter flash mode again, no green led, only bocked se screen, please help!!! how did you manage o get into flash mode?
Click to expand...
Click to collapse
On the W/X8 and X10 mini/Pro you can get into FLASH MODE by keeping the back button pressed while connecting the TURNED OFF phone by USB.
That being said, you have a NEO which doesn't work that way.
Your phone has "fastboot" - to get there ... turn off the phone, keep the bottom right key pressed and connect the USB cable to the PC.
What you have to do from there on out is either best asked in the RIGHT subforum or through Google research.
B.Jay said:
On the W/X8 and X10 mini/Pro you can get into FLASH MODE by keeping the back button pressed while connecting the TURNED OFF phone by USB.
That being said, you have a NEO which doesn't work that way.
Your phone has "fastboot" - to get there ... turn off the phone, keep the bottom right key pressed and connect the USB cable to the PC.
What you have to do from there on out is either best asked in the RIGHT subforum or through Google research.
Click to expand...
Click to collapse
how did you get this thread back up?
Sent from my X8 using XDA App
wilbso said:
how did you get this thread back up?
Click to expand...
Click to collapse
Hummm...?
I only replied to benga_mircea's post from today.
Or ... did I miss something? *notsure*
Thank you for your help, but I can't acces flash mode or fastboot mode again, lika I use to, after I connect the batery, push the back button, insert the usb, a few seconds and the "sony ericsson" screen pops up again and stays blocked. I think I've killed my phone
Well, for as long as you see the SONY ERICSSON boot logo - and I'm assuming from the way the X8 works here - the boot loader and kernel are intact; there's just a problem boot-strapping the system ROM (shot system, bad flash).
The real problem is that Fastboot isn't comparable to the Flash Mode of our phones ... it's very different.
In your stead I would try to find out how you can perform a "disaster restore" (like we do with our W/X8 through Flash Mode and Flashtool) by flashing back to stock.
Anyway ... just to repeat it ...
1. You need to TURN OFF your phone and DISCONNECT it from the computer/charger.
2. You insert the USB connector into JUST your phone.
3. You press the bottom/right button (also "Back"?) and keep it pressed while you connect the USB to the computer.
Once the phone connected to the computer as a (wild guess!) "Flash Device" or "Fastboot Device" you need the apropriate tool(s) and Stock ROM image - in case PC Companion refuses to repair your phone.
---------- Post added at 12:21 PM ---------- Previous post was at 12:18 PM ----------
Any chance this thread (in the Xperia Neo General section) could be of any help to you?
B.Jay said:
Hummm...?
I only replied to benga_mircea's post from today.
Or ... did I miss something? *notsure*
Click to expand...
Click to collapse
Where did you find it? I mean where did boy find the thread? My Sig? Looking through old posts?
Sent from my X8 using XDA App
B.Jay said:
Well, for as long as you see the SONY ERICSSON boot logo - and I'm assuming from the way the X8 works here - the boot loader and kernel are intact; there's just a problem boot-strapping the system ROM (shot system, bad flash).
The real problem is that Fastboot isn't comparable to the Flash Mode of our phones ... it's very different.
In your stead I would try to find out how you can perform a "disaster restore" (like we do with our W/X8 through Flash Mode and Flashtool) by flashing back to stock.
Anyway ... just to repeat it ...
1. You need to TURN OFF your phone and DISCONNECT it from the computer/charger.
2. You insert the USB connector into JUST your phone.
3. You press the bottom/right button (also "Back"?) and keep it pressed while you connect the USB to the computer.
Once the phone connected to the computer as a (wild guess!) "Flash Device" or "Fastboot Device" you need the apropriate tool(s) and Stock ROM image - in case PC Companion refuses to repair your phone.
---------- Post added at 12:21 PM ---------- Previous post was at 12:18 PM ----------
Any chance this thread (in the Xperia Neo General section) could be of any help to you?
Click to expand...
Click to collapse
Thanks! I tried like 50 times, and nothing, the ennoing "sony ericsson" is booting (no sony ericsson logo as usualy, just the writing) I flashed 10 times in the past whith no problem. Now, even when I put it to charge ( wall charge) the phone is turning on showing that stupid "sony ericsson" writting, I cant shut it down from the on\off button. Before killling it, I've instales stock MT15i_4.0.A.2.368_GLOBAL ROM, then I upgraded to MT15i_4.0.2.A.0.42_Global, then rooted with DooMLoRD_v4_ROOT-zergRush-busybox-su, Installed CWM( wiped cache, updated SE tweaked v8.5 Rom) After the restart, the "se" writting started booting. I've pulled out the batery, and begined flashing it with flash tool(no green led).The flashing started and my little brother accidentaly pulled out the Usb cable; that's the whole story! I've tried like 100 times with wotan, flash tool and FlashTool_0.2.9.1_FOTAUnbrick, no result, even if pc companion tells me "phone conected" and gives me further instructions whith the phone being dead, and the flash tool showing me to connect de device... Thank you for all the help, hope there is a solution. sorry for the long post and my bad english...
---------- Post added at 11:43 PM ---------- Previous post was at 11:24 PM ----------
04/040/2012 23:40:02 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:04 - INFO - Device disconnected
04/040/2012 23:40:06 - INFO - Device connected with USB debugging off
04/040/2012 23:40:06 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:07 - INFO - Device disconnected
04/040/2012 23:40:10 - INFO - Device connected with USB debugging off
04/040/2012 23:40:10 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:18 - INFO - Device disconnected
04/040/2012 23:40:35 - INFO - Device connected with USB debugging off
04/040/2012 23:40:35 - INFO - For 2011 devices line, be sure you are not in MTP mode
Flash tooll results when trying to connect (pulling batery-10 secs, back butoon, usb cable)
benga_mircea said:
The flashing started and my little brother accidentaly pulled out the Usb cable; that's the whole story!
Click to expand...
Click to collapse
Whoa... that's what I call a "security vulnerability".
If the flash process got interrupted because your lil bro pulled the USB cable I'm somewhat certain the NAND is messed up pretty good - no wonder you're stuck at the SE boot logo.
If there's no way by which you can get the device back to normal (read: even the guys over in the Neo sub-board are out of ideas/help) I think your best shot would be to send it in to SE for repair if you still got warranty. SE should have other means to resurrect the device and slap it back into shape.
I'm sorry I can't really help you here with this - the Neo is different from the X8 and also different from the way my tablets work.
Thank's for the advice! My waranty is lost, i've unlocked the bootloader. Only if I could enter in flash mode!
benga_mircea said:
Thank's for the advice! My waranty is lost, i've unlocked the bootloader. Only if I could enter in flash mode!
Click to expand...
Click to collapse
Well, on my Samsung, which has Fastboot, I first enter Fastboot and from there I put the device into download mode for flashing (in theory you can compare "Download mode" to the "Flash mode" - in Flash mode the W/X8 awaits a ROM image to be flashed into the NAND, pretty much the same as "Download mode" works).
Since your Neo isn't completely dead (you just have a shot system due to the flash interruption) you only need to find a way how you can re-write the system.
I lack the time to research how the Neo works, but I think there should be a way to get the device going as you can even "resurrect" a W/X8 where you formatted the system partition (by mistake in CWM, for example). However, that's not as bad as interrupting the USB connection but about the same "ooops" to blank the system.
Flash mode not working, fastboot not workingI Tried a lot of programs (wotan, flash tool, fota unbrick tool, octopus, omnius for se, pc companion, se update. Non of them manages to connect to my phone. If only I could connect for 1 sec. I have a backup of TA, but I can flash it. Thanks anyway!
is it safe to unlock BL, if we have x8 with manuf.code 11W28? pls help me
NarutoDroid said:
is it safe to unlock BL, if we have x8 with manuf.code 11W28? pls help me
Click to expand...
Click to collapse
yes 11W30 or below should unlock fine but for me 11W33 also no problem
Sent from my E15i using xda premium
hello
After use of ACE Advanced Hack Kit that I think might be useful to fix the problem wifi and bluetooth was not working
Former ROM update-cm-7.1.0-RC1-DesireHD-signed
I did a radio update and then HBOOT
My Desire HD does not boot, it gets stuck at startup, HTC logo white screen, after 2s 2nd vibration volume keys - + does not work when I connect DHD not even recognized by the pc, is there a solution please help me
I tried the UMT, the fastboot by adb, I believe that DHD must be in charge mode or bootloader mode so that it works
I always try to reconnect to the DHD with the PC (windows 7), if t is an OS that it can know the DHD in off mode or the mode "LOCKED")
drmatrixxx said:
hello
After use of ACE Advanced Hack Kit that I think might be useful to fix the problem wifi and bluetooth was not working
Former ROM update-cm-7.1.0-RC1-DesireHD-signed
I did a radio update and then HBOOT
My Desire HD does not boot, it gets stuck at startup, HTC logo white screen, after 2s 2nd vibration volume keys - + does not work when I connect DHD not even recognized by the pc, is there a solution please help me
I tried the UMT, the fastboot by adb, I believe that DHD must be in charge mode or bootloader mode so that it works
I always try to reconnect to the DHD with the PC (windows 7), if t is an OS that it can know the DHD in off mode or the mode "LOCKED")
Click to expand...
Click to collapse
You ran the hack kit on am already rooted phone?
Take the battery out n insert it back . Hold the volume down n press power button. It should take you to recovery mode straight away.
N then do what ya like
Sent from DHD Runny V4.0
thanks
thank you
but the recovery mode does not work anymore
volume button - or + not working
Is the keys not working or the isn't reacting to them
Sent from my Desire HD using XDA App
Seconded the above question,you ran the kit on an already rooted phone?
Sent from my Nokia years ago
Quilty
hi have the same problem, did not read the part where it said do not do it on a rooted device.
This is xda , wat is the best way to fix it
Please
my idea is to change it back to stock but my htc sync wont pick up my device
Wolmeester said:
hi have the same problem, did not read the part where it said do not do it on a rooted device.
This is xda , wat is the best way to fix it
Please
my idea is to change it back to stock but my htc sync wont pick up my device
Click to expand...
Click to collapse
Why would you try to root an already rooted device?..
i would have said that i did not read, but to be true i was desperate, i updated something then my wifi stopped working, so i did that hoping it would fix that,
but i have found a fix for the problem
do this step
http://forum.xda-developers.com/showthread.php?t=841890
then do this
http://forum.xda-developers.com/showthread.php?t=1377119
I can not do, my PC does not detect the DHD
Hi,
I have the same problem. I ran the ace hack kit on an already rooted phone! It was a big mistake. Currently the phone is not detected by PC and "Recovery" and "Factory Reset" does not work.
By the way, when the bootloader is running, the pc detect the phone, but I don't know how can I do in this situation.
Any help plz.
Download a 1.32 RUU. Select "Fastboot" when you're in the bootloader. Connect the phone with ur pc and run the ruu.
I do what i want, because I can.
Hi all,
Today I will explain you how to unbrick your dead phone, now that I have a XA Ultra for dev and test I tried to kill it (yes I'm crazy).
until now I didn't searched all ways because my XA was my daily phone and when I asked the community to send or sell me a dead phone, no answers
I tried many ways to brick and unbrick the phone, tried to brick it by not using FSC file, using an old Falshtool, flashing boot.img from an other device (Xperia X and Z5 ) and I always recovered it. In my last try the phone was totally dead, no red light and not detected by my computer but all ended fine :good: I will upload a video soon.
On Mediatek devices, if the preloader is not corrupted you can always recover it. If it doesn't work for you maybe you can use some "special" boxes to connect on the UART serial port and flash the preloader but I didn't find the correct pinout on it and no proofs what will work on XA and Ultra.
Other thing, if someone claim that he found an other way and need your phone (and money), don't trust it until you have some real proofs (some users know what I mean), it's probably a scam to steal your phone.
By following this guide you will void the warranty so do it only if you can't send it to Sony!!
## What we need ?
- Some tools to open the device (a plastic card can be enough)
- The last version of Flashtool
- Flashmode drivers installed (you can install them from Flashtool)
- A firmware downloaded from Xperifirm (inclued in Flashtool)
- One set of sticker glue tape for the backplate like this one:
https://s-media-cache-ak0.pinimg.co...4ff8978f9e--waterproof-stickers-glue-tape.jpg
## Step by step guide
1. Follow this video to remove the backplate (thanks to the author): https://www.youtube.com/watch?v=2O5dAljOpR4
2. Unplug the battery connector, pull it from the upper side very slowly or you can damage it.
3. Open Flashtool and load the firmware (remove all TA related partitions), click "flash" and wait until you see the popup to plug the phone.
4. Hold "vol-" and plug the phone, you will see the red light 1 seconde and the green light just after.
5. Release "vol-" button and wait until the end of the flash process.
6. Unplug the phone, plug the battery connector and power on the phone.
7. If it's ok the phone will start and you can put the backplate again (clean the old glue and put the new sticker)
## How to avoid brick
First of all you must understand that flashing something on our devices is always dangerous, official or unofficial things.
Generally our devices goes wrong after updating the firmware, to reduce the risk you have to follow some simple things:
- Don't unlock the bootloader and use OEM tools.
- Always download files from trusted sources.
- When you use Flashtool, always use the last version, download the firmware from the inclued Xperifirm and always use FSC file when asked.
If it worked for you, don't forget to feedback, hit the thank button and why not offer me a coffee
Have a nice day
after flash dead..flashed this F3212_36.0.B.1.111_1302-9719_R4A
pc detect devices management "unknown device
please help me
rubymunna said:
after flash dead..flashed this F3212_36.0.B.1.111_1302-9719_R4A
pc detect devices management "unknown device
please help me
Click to expand...
Click to collapse
You followed my guide? Have you the green led?
what should i do if i don't get the green led and can't enter flash mode
It stays at the red light..
what else can i do?
If it doesn't work for you I don't know what you can do. Maybe if one day it doesn't work for me too I will try some more experimental things or if I can have a device with the same problem in my hands.
Welcome my dear friend! My phone is also lit red led. How to reflash?
Unfortunately at this time their no way to reflash your phone if you have that red light flash only
If don't have flash mode or fastboot use able their is not a way to recover.
Sent from my F3213 using xda premium
my xa ultra dual wont response the touchscreen
hi all I desperately need advice for my unresponse or maybe likely death xperia xa ultradual.
I have some lagging issues at first then I reset to factory, then comes normal then a week later become lagging again,and finally stuck in the welcome screen after xperia logo and I the touchscreen becomes totally unresponsive ,the detailed are in this link youtu.be/_ELKIpn7QG8
I wonder should I change the LCD TOUCHSCREEN or is it just some corrupt files that caused this problem, because I experience someflickering isssues in the screen. FYI I still learning howto use a flashtool cause I am afraid that it can brick myphone.
very much appreciated,warms regards from Indonesia
my BL still locked but I dunno, somehow i feel safe & happy to found this thread
keep the good job mate!
sony- android- xperia- off
good day! i hope im on the correct thread. i am having this issue on my xperia xa ultra dual.
everytime i turn the device on, it displays the sony logo, then the android logo, the xperia logo, then it turns off. i cant seem to get past through this regardless if i'll press the volume- and power or the volume+ and power. im almost certain that this can be fixed by doing something on the flashtool. i guess i just dont know how to do it. a step-by-step tutorial is greatly appreciated.
If you have why not share it in xda? Probably you are a scammer and request money in order to unbrick phone... Seen so many like you
gsser said:
If you have why not share it in xda? Probably you are a scammer and request money in order to unbrick phone... Seen so many like you
Click to expand...
Click to collapse
I totally agree with you, and now you can see fake users who post fake feedbacks but until now we have absolutely no proof about this miracle
Its like videos on youtube with title saying 2017 paypal free money hack, which directs you to a survey site and wants you to pay money in order to download a 'paid virus' even though it says free you still pay for a virus. They are too funny man
My phone is G3412 after flash rod 8 my phone is dead not power button execute just connect usb cable red led turn on and screen black please help me for turn on phone thanks?????
hi, my phone is g3221 and its dead boot, I already flash in on box but its said trim area is damaged, do you know how to fix it?
F3213 DEAD
SOMC MTK6755 Virtual Serial PORT Driver shown in device manager .
hey there my xa ultra phone is not even starting like its fully dead what is the solution
I know I'm late but, Those who are having problems with green light not showing up:
1. Hold the Volume Down button
2. Connect USB
3. Keep holding the button for 30 seconds atleast.
When bricked, device doesn't show green light readily. It takes atleast 30 seconds.
Thank you
You're the BOSS! You've saved my Mini ST15i. Thank you! :highfive: