Streak_351_15609_00 - Streak 5 General

Anyone else getting this update pushed out to them for the AT&T Streaks? I'm just downloading it as I type. What's new in it?

got the same update for my stock 318 version in germany right now. seems to be international update.
sry for my bad english
greetings from germany

I just got the notification a few minutes ago, but I got no wifi access right now.
I'm running .318 on AT&T also. Wouldnt it be sweet if it were Gingerbread!!!
Sent from my Dell Streak using XDA App

http://forum.xda-developers.com/showpost.php?p=13119584&postcount=1

It is 2.2.2. Appears to have fixed the bluetooth voice dialing. Yes!

I'm downloading it from here. I'm on Steve's 1.9 and have StreakMod-Recovery 0.3.2 installed. How would i go about installing this .pkg?

Downloading now, so mostly bugfixes I take it?
Sent from my Dell Streak using XDA App

Didn't get notification, but downloaded from link provided. Got error on install. Rebooted back to 2.2. One guy has reported a brick. Perhaps it is still a bit buggy? I'm on a locked ATT.

Downloaded it to my desktop but am waiting to see what the results of this update from others are before applying it.
Currently running build 339 (Rogers ROM) and Froyo 2.2.1.

I am getting error in installation. Seems unstable. Coming from 1.9

IF you are on a custom rom, then you need an official recovery to go back on an official build BEFORE installing this one.

Downloading as I am typing this. Let's see what is new.
My region = India. Phone region = EU

My streak has been on the Dell logo for about 10 minutes now. I'm hoping something happens soon.
Sent from my LG-C900 using XDA Windows Phone 7 App

A mirror in case someone needs it.
Streak_351_15609_00.pkg
http://www.mediafire.com/?b6ptca9kh11zrgc

Yea...it works!
...installed it and everything "LOOKS" ok at this point. Haven't tested it out yet but it did stay on the Dell logo for a good while (about 10 minutes or so). At least, Radio, WIFI and BT seem to be working at this point.
Will keep testing...

Zaslav said:
My streak has been on the Dell logo for about 10 minutes now. I'm hoping something happens soon.
Sent from my LG-C900 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
It does seem to take a while on 1st boot, did you get just the static Dell logo or has it gone thru the animated Dell logo and the 2nd static logo? also what rom did you update from? Factory or custom?
Cheers
BR
(I updated from 345 rooted with no issues) the flash process showed this version as dated march 6th.

Mine is still on the Dell logo I think its been about 25 minutes...what should I do?
Sent from my LG-C900 using XDA Windows Phone 7 App

Brau0303 said:
It does seem to take a while on 1st boot, did you get just the static Dell logo or has it gone thru the animated Dell logo and the 2nd static logo? also what rom did you update from? Factory or custom?
Cheers
BR
(I updated from 345 rooted with no issues) the flash process showed this version as dated march 6th.
Click to expand...
Click to collapse
I can't seem to remember now I just got the thing recently. It was on 2.2 firmware.
Sent from my LG-C900 using XDA Windows Phone 7 App

Has anybody been able to root it?I have been using Superoneclick 1.5.5 and 1.7.0 with no success at all.I will see if I find another way to do it.

Is the tethering and wifi still there before I finish downloading?

Related

new official dell rom just online for some.

Didn't see it posted it yet here so thought I would give it to u guys:
Dell just released a new official rom... downloading now... it's a 318 rom now (should be an unlocked EU rom)... The page: http://mobileupdate.dell.com/?version=GAUSB1A121100 now links to the http://mobileupdate.dell.com/PackageProduc...18_12821_00.pkg which is again 150 MB
Is there anything new in this version?
Just uograded mine without a hitch. I can confirm that no longer getting the too many redirects error browsing.
Went from GAUSB1A130900-US to GAUSB1A131800-US
Sent from my Dell Streak using XDA App
Can you flash from ATT 1.6 directly to this or do I need to be on another version first??
shababak said:
Just uograded mine without a hitch. I can confirm that no longer getting the too many redirects error browsing.
Went from GAUSB1A130900-US to GAUSB1A131800-US
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
How about UI or other differences or Bugs?
UI is similar to before.
What things are you intrested in? Let me know and ill try it out.
Btw... Quadrant score was around 800 (tested after upgrade)
Sent from my Dell Streak using XDA App
shababak said:
UI is similar to before.
What things are you intrested in? Let me know and ill try it out.
Btw... Quadrant score was around 800 (tested after upgrade)
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
How you update over 309 or 315?
Did You Root this Build? or is z4 works?
How do you update from o2 2.1? I keep getting FOTA model mismatch.
Update: I had 02 2.1 running on my unlocked streak on ATT. All I had to do to get this on my Streak was flash using fastboot the 309 recovery img. once I flashed that I booted into recovery mode and selscted update 2 and it installed right from the SD card. Will mess with it tonight and see if it is fully functional.
Update over 309.
Root is what im battling now. Z4root isnt playing nice.
Sent from my Dell Streak using XDA App
shababak said:
Update over 309.
Root is what im battling now. Z4root isnt playing nice.
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
You try super one click?
Feels like dell has locked things down.
Cant find these apps anymore on market.
Tried downloading the apk from the xda forumn from the phone and I get a failed download "cannot download. The content is not supported on this phone"
Sent from my Dell Streak using XDA App
New In this update
Not that it may apply to everyone, but the facebook contacts sync is now included and looks to be working in this latest release.
Got around this issur. Still no luck with z4root 1.3
Sent from my Dell Streak using XDA App
kasperke said:
Didn't see it posted it yet here so thought I would give it to u guys:
Dell just released a new official rom... downloading now... it's a 318 rom now (should be an unlocked EU rom)... The page: http://mobileupdate.dell.com/?version=GAUSB1A121100 now links to the http://mobileupdate.dell.com/PackageProduc...18_12821_00.pkg which is again 150 MB
Click to expand...
Click to collapse
Your 2nd link = 404. Clicking through from the 1st one = success. Soon as the D/L completes I'll try rooting with my rom kitchen and report back asap.
UPDATE 1: Yeah, well it goes without saying that the EU rom update won't place nicely with my US Streak, and as of right now the .pkg file is resisting my attempts to extract it. I've got to head to the office pretty quickly here, but I'll see what I can accomplish from there. If anyone with the EU version wants to help, load up the update, use fastboot to flash the custom streak recovery console, do a nandroid backup, and post that somewhere I can get at it. I should be able to root that pretty quickly. ( maybe... I've been wrong before... a lot. )
I have 309 and when I downloaded it from the link and went to install it. FOTA missmatch. What gives?
Terrigno said:
I have 309 and when I downloaded it from the link and went to install it. FOTA missmatch. What gives?
Click to expand...
Click to collapse
Use THIS Recovery and should Flash ok
Terrigno said:
I have 309 and when I downloaded it from the link and went to install it. FOTA missmatch. What gives?
Click to expand...
Click to collapse
From your carrier icon I'd say Euro Rom + US Streak = FAIL. Don't feel bad I tried it too just for the heck of it.
kasperke said:
Didn't see it posted it yet here so thought I would give it to u guys:
Dell just released a new official rom... downloading now... it's a 318 rom now (should be an unlocked EU rom)... The page: http://mobileupdate.dell.com/?version=GAUSB1A121100 now links to the http://mobileupdate.dell.com/PackageProduc...18_12821_00.pkg which is again 150 MB
Click to expand...
Click to collapse
k no problem really but you copied my words literally word by word from Modaco...
jeffrey2000 said:
k no problem really but you copied my words literally word by word from Modaco...
Click to expand...
Click to collapse
from the looks of it i'd say he tried to quote you but forgot the tags

[Q] Question about flashing 2.2 from an older 2.2 image

Hi there, I've searched a lot for an answer, but haven't found anything. I don't want to make a mistake and end up with an unusable device.
I bought a used Streak off eBay, which is already running Android 2.2 (Baseband GAUSB1A130900-EU build number 11548). I am having problems authorising Facebook widgets, which I believe is linked to a problem loading HTTPS sites (needed to authorise some Facebook widgets such as the LauncherPro one).
I would like to upgrade to this rom:
http://android.modaco.com/content/d...o-com/325595/dell-new-official-rom-8-12-2010/
Which apparently solves the above problem.
Could anyone talk me through what is required? The problem is I don't know what has been done to the handset before I bought it, is there any way to check? Does it need to be rooted to 'upgrade' from 2.2 to another 2.2 image? Do I just need to copy the new image to the SD card, rename it and boot into recovery mode? My desktop is running Ubuntu if that affects the procedure.
Any help is much appreciated.
You need to update your streak to build to 12332, the 315 package first. To do this just download it from xda-forums(I can't find which forum right now), rename it Update.pkg(should already have .pkg on end of it). Then boot into recovery by turning off Streak, then hold volume up & down & power button @ the same time. You should see 4 options, choose option 2(something about installl Update.pkg). Your phone will then ask you to press the camera button to begin update.
Sent from my Dell Streak
Thanks a lot for the reply. After I've installed the image you suggest is it then safe to install the one I originally linked to?
Is the rule to generally only upgrade one release at a time?
Thanks.
Sent from my Dell Streak using XDA App
i just downloaded the 315 file from the dell website with the stock browser on the streak..then installed it by tapping the downloaded file in the top bar while my streak stayed connected to my pc with the usb cable....and did the same with the 318 file.
It has to reboot several times during the update but it works perfect.
no rooting, no recovery needed... i have also an unlocked euro version with 1.6 first.
-so 1.6 to 2.2 en now the latest 318 version.
Not necessary to update to 315 first. Just follow this link:
http://mobileupdate.dell.com/?version=GAUSB1A111800
Worked perfect for me!
(coming from 30900-eu)
Sent from my Dell Streak using XDA App
Godo_PPL said:
Not necessary to update to 315 first. Just follow this link:
http://mobileupdate.dell.com/?version=GAUSB1A111800
Worked perfect for me!
(coming from 30900-eu)
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
This post is correct. I forgot that you have the image already if you are on Froyo. Just follow the link from your phone and you should be fine
Great, thanks a lot guys.
Sent from my Dell Streak using XDA App
My streak is locked to O2, is this update going to cause any issues?
Thanks again.
Anyone come across this before? Any help would be much appreciated. Thanks
Sent from my Dell Streak using XDA App

How to acheive 318 Upgrade coming from US 1.6

Hi I would like to upgrade my father & a friend's Streak. They are both running US AT&T. I had messed with mine for 1 whole day before I could get to Froyo. I went to O2 1.6, then was stuck trying to get the 8105(O2 2.1) I eventually installed Froyo by using the CLEAN UNTOUCHED method.
I am not trying to go through this nightmare again!!!! Can anyone tell me if I install the 309 recovery image, then use Update.pkg with the 318 update if it will take them straight from 1.6 to 2.2. Or if I just perform the CLEAN UNTOUCHED method posted by DJ Steve will that work coming from ATT 1.6?
Install o2 1.6 and then it will tell you there is an update. it will download and install 02 2.2 for you
Thanks, I hope its that EASY!!!
After I install the O2 update, can I just upgrade using the 318 package, so that his phone shows as a unit ending in 00 baseband, instead of being tied to O2 network? Do you know if installing the O2 update will give him the 309 recovery?
ronj1986 said:
After I install the O2 update, can I just upgrade using the 318 package, so that his phone shows as a unit ending in 00 baseband, instead of being tied to O2 network? Do you know if installing the O2 update will give him the 309 recovery?
Click to expand...
Click to collapse
What i would do is once you have upgraded i would put the 309 recovery on then run the 318 update no need to run the 02 2.2 update
The best and cleanest route is to use QDL Tool to go straight from ATT 1.6 to ATT 2.2 build 308 then apply the 318.pkg
whole process should only take about 30 minutes.
Tool can be found here: streakdroid DOT com /?page_id=15[/url]
its called repairtool on the right column
I tried the QDL tool, but since I have a windows 7 & 64 bit, there was a lot of driver changes that I needed to apply. Once I successfully had that installed it showed the QUALCOMM modem, but didn't show up as DIAGNOSTIC. So when I connected the Streak it showed up as some port.....but not what I needed it to show as.
lufc said:
What i would do is once you have upgraded i would put the 309 recovery on then run the 318 update no need to run the 02 2.2 update
Click to expand...
Click to collapse
This is a confusing post LUFC What am I upgrading to in the 1st place? Are you saying once I have O2 4399, then flash 309 recovery, then 318 Update.pkg?
ronj1986 said:
This is a confusing post LUFC What am I upgrading to in the 1st place? Are you saying once I have O2 4399, then flash 309 recovery, then 318 Update.pkg?
Click to expand...
Click to collapse
Yes mate thats the way to go
Tied to the o2 network? OK, so what's the disadvantage of being tied to the o2 network?
Hmmmm maybe I should go back to o2 2.1 and upgrade to 18 instead of 19? I remember seeing some tweaked kernel files thread that might help this thing run better.
Sent from my Dell Streak using Tapatalk
carhigh said:
Tied to the o2 network? OK, so what's the disadvantage of being tied to the o2 network?
Hmmmm maybe I should go back to o2 2.1 and upgrade to 18 instead of 19? I remember seeing some tweaked kernel files thread that might help this thing run better.
Sent from my Dell Streak using Tapatalk
Click to expand...
Click to collapse
Nevermind, really, im sticking to what ive got until the official us version comes out. So, another 6 months then
I would advise against that Carhigh....You would be missing out on all the wonderful capabilities of the Streak and Android 2.2. What Baseband & version of Android do you have installed now?
I'm already on o2 2.2, 619 I think. The one released last week. I was wondering why people are going to 618, instead of the over the air 619, which is what I did. And instead of screwing around with it, might as well wait for official us 2.2 then just go to that. Shouldn't be to long of a wait, but who knows how long it will really be. Unless going fro 619 to 618 is really worth it.......
ronj1986 said:
I would advise against that Carhigh....You would be missing out on all the wonderful capabilities of the Streak and Android 2.2. What Baseband & version of Android do you have installed now?
Click to expand...
Click to collapse
Sent from my Dell Streak using Tapatalk
I finally got the QDL tool to work. I just used my older laptop on Windows Vista 32-bit
hi. Qdt works in Windows 7 32bits now?
Sent from my Dell Streak using XDA App
onixlu said:
hi. Qdt works in Windows 7 32bits now?
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
Yep. I just used it on my window 7 32 bit the other day. It went very smooth.
Sent from my Dell Streak using XDA App

bricked dell streak..... please help

hello guys as the title says I bought the dell streak from best buy on jan 2 and was trying to put the 2.2 on it, so I did the one click root and it worked, but then by mistake I did the fastboot mode .... and root it again .... after that the phone got stuck on the dell logo with the flashing lights......
is there a way to run the stock recovery and rom on the computer so I can fix my phone.... please I need input.....
I want to restore the phone again .... can somebody help me ...????
is it fixable?? I have a dell streak white at&t 1.6 android 6601
thanks..... please help!
Can you still get into fastboot or recovery?
Sent from my Dell Streak using XDA App
stoney73 said:
Can you still get into fastboot or recovery?
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
yes I can still get into fastboot or recovery mode I tried running some rom's but after the half point an error comes out and aborts the new roms...
If you can get into fastboot and recovery your fine. I recommend the qdl route personally.
Sent my Dell Streak from XDA app.
Stock 318 with tweaks.
Gtalk:jeremyritzmann
Twitter: jeremy_legend
Or flash the clockwork mod and then follow the instructions in dj steves thread
Sent my Dell Streak from XDA app.
Stock 318 with tweaks.
Gtalk:jeremyritzmann
Twitter: jeremy_legend
Only way to upgrade the white dell streaks is with the qdl tool. Theres something about them... All other methods just leave you in a boot loop. Go to the guide section of streakdroid.com it has everything you need to get to 2.2, including a great video tutorial.
Sent from my Dell Streak
Not Android Development
Moving to General
Kohawk09 said:
Only way to upgrade the white dell streaks is with the qdl tool. Theres something about them... All other methods just leave you in a boot loop. Go to the guide section of streakdroid.com it has everything you need to get to 2.2, including a great video tutorial.
Sent from my Dell Streak
Click to expand...
Click to collapse
ok thanks.... but this is what happened i got frustrated and went to bestbuy and exchanged it .... but now ... for some how I rooted then I installed 1.8.7 recoverymod and after that I did the new baseband ..... and the rom wouldnt load so my phone still load to 1.6 but it doesnt have wifi nor 3g and on the about divece the baseband says... unknown......
what can I do.????? jejeje thanks!!
claudiovr6 said:
ok thanks.... but this is what happened i got frustrated and went to bestbuy and exchanged it .... but now ... for some how I rooted then I installed 1.8.7 recoverymod and after that I did the new baseband ..... and the rom wouldnt load so my phone still load to 1.6 but it doesnt have wifi nor 3g and on the about divece the baseband says... unknown......
what can I do.????? jejeje thanks!!
Click to expand...
Click to collapse
use QDL holmes, or better yet exchange it and get a black one. I could never get the white one to work. I eventually bricked it, took it back and got a black one. Never tried anything with the black one until last night, and it went flawlessly with QDL.
claudiovr6 said:
ok thanks.... but this is what happened i got frustrated and went to bestbuy and exchanged it .... but now ... for some how I rooted then I installed 1.8.7 recoverymod and after that I did the new baseband ..... and the rom wouldnt load so my phone still load to 1.6 but it doesnt have wifi nor 3g and on the about divece the baseband says... unknown......
what can I do.????? jejeje thanks!!
Click to expand...
Click to collapse
well you are going about this all backwards... first and foremost. You have a white streak, so the ONLY way to get 2.2 is through the QDL tool. Secondly, no matter what color the streak is, you cannot jump directly to one of steves builds from 1.6(donut). You flashed the 2.2 baseband, which is not compatible with your current stock rom, that will kill your data and phone connection amongst many other things. You need to go to streakdroid.com, take a look at the guides section and then upgrade via the QDL tool. That is your only way other than waiting for the OTA.

Flashing Buttons After Update to Official 340 build

I decided to update my Streak to the official build 340 today and it installed but I now have the flashing lights thing.
I used the streakmod to install the update. I tried using rom manager to do it but it doesn't work.
Is there something I can do to stop the flashing lights?
Sent from my Dell Streak using XDA App
Oh, this might be because I didn't go back to 1.6 from 2.3 build 309.
Sent from my Dell Streak using XDA App
I had this issue going from 318 to 341. Wondering what the solution is
Sent from my Dell Streak using Tapatalk
Why are you guys going from an unlocked build to a locked at&t build? You're only gonna havebless features and more preinstalled at&t bloatware.
Dell Streak powered by Streakdroid 1.8.1
I am just trying the official build to see what it's like. I need my phone for work and can't really deal writh instability.
Is DJ Steve's latest build stable? I can't get a clear answer to that question.
Sent from my Dell Streak using XDA App
i am trying to go to a successfully loaded post froyo 2.2.2 build with little to no bloat...trying to load 322 now and see if that baseband will work to 341.
htcjikelly said:
I am just trying the official build to see what it's like. I need my phone for work and can't really deal writh instability.
Is DJ Steve's latest build stable? I can't get a clear answer to that question.
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
Its different for each person. I started with a fresh 309 build then upgraded to a factory reset 318 and didn't configure anything then flashed 1.8.0 and had zero issues. Upgraded to 1.8.1 and still have zero issues. Everything works great on mine. I use it as my everyday phone. But like I said others haven't had it that smooth but I'm not sure if they came from a complete factory reinstall like I did.
Dell Streak powered by Streakdroid 1.8.1
Go check out the tutorial for using the QDL tool on streakdroid.com. It'll get you to a stock Dell 2.2. A word of advice though, the tutorial has you download all necessary drivers, but does not give the step for installing the ADB driver. The driver is there, you just have to pick the proper one for your system.
Sent from my Dell Streak using XDA App
Yes I did the QDL tool thing and the hard part was getting the right drivers for the qualcom thing and then the ADB tool.
But, it worked. I briefly had streaddroid 1.8.1 on my system. It looked alright and my phone worked. I didn't test wifi though since I moved on to the QDL tool trying to get to 2.2.2 which I'm really confused about apparently.
Once you use QDL to get 2.2 make sure you do system updates after that to get up to the most current build.
Dell Streak powered by Streakdroid 1.8.1
Spectre51 said:
Its different for each person. I started with a fresh 309 build then upgraded to a factory reset 318 and didn't configure anything then flashed 1.8.0 and had zero issues. Upgraded to 1.8.1 and still have zero issues. Everything works great on mine. I use it as my everyday phone. But like I said others haven't had it that smooth but I'm not sure if they came from a complete factory reinstall like I did.
Dell Streak powered by Streakdroid 1.8.1
Click to expand...
Click to collapse
No problems here as well. 181 is pretty stable for me.
Sent from my Dell Streak using XDA App

Categories

Resources