Database Users

[Q] Hi, Cu rious case of Galaxy s

Small run down of what i did and if anyone can help ....
I was running 2.3.3 and updated to the unofficial 2.3.4 using odin and simply honey 5.0 revenge by sgt. That's when i noticed that the phone does not connect to the bell network.The rest of my phone works perfectly even the wifi...but like i said i can t seem to connect to the net work anymore.....
firmware 2.3.4 / baseband version i9000xxjvr/ kernel version 2.6.35.7 [email protected]/ build number simply honey 5.0 revenge
i ve tried some stuff that i have read in these forums like
1. Put apn info my self....tried that nothing.
2. Called tech support and they told me to take the battery out and then the sim
put it back , nothing again
My question is do i have to go back to stock rom to get the network back or is there something else i can try....
information on this subject is sketchy, when i do a google search ...any help would be appreciated...thanks in advance

It probably was a bad flash sounds like some of your system files did'nt compile correctly. Odin back to stockand reflash. I always have flash problems when going past 2.2.1 almost always have to odin back thats why I stick with Froyo a bit mre stable when hopping roms.

strtkempo said:
It probably was a bad flash sounds like some of your system files did'nt compile correctly. Odin back to stockand reflash. I always have flash problems when going past 2.2.1 almost always have to odin back thats why I stick with Froyo a bit mre stable when hopping roms.
Click to expand...
Click to collapse
Couple of questions for you guys out there.......
First my info I am running firmware version 2.3.4 / basband i9000xxjvr/kernel 2.6.35.7 and build number simpley honey 5.0 revenge ...ntw ..my csc i9000 oxajvq
1. Can i go straight to stock using odin from this configuration with out bricking my phone?
2. Can i just flash the csc for bell because someone in the forums told me that is not the right csc for canada, quebec.
please advise....thanks in advance....

How to install cm7 on a green lens defy eclair

I am have rooted my phone installed 2init i tried installing cm7 update-cm-7.1.0-jordan-signed but wen i get into custom recovery and select install from ad card i get an error sayin cannot mount sd card. Wats wrong am i doin it wrong...plz help
Sent from my MB525 using XDA

Same issue here...(although I think I have a red lens defy).
Here are the specs of my phone:
System version: Moto_version.2.51.1.MB525.Retail.en.GB
Model number: MB525
Firmware version: 2.1-update
Baseband version: EPU93ST2_U_03.0A.01
Kernel version: 2.6.29 [email protected] #1
BPflex version: UCAJRDNEMARAB1B80AA030.0R
APflex version: GAS_EMEA_UCAJORDANRTEU_P048
Build number: JRDNEM_U3_2.51.1
A clue can be found here: http://forum.xda-developers.com/showthread.php?t=1032212
Q: I can't flash from recovery, I get an sdcard mount error.
A: It seems to be related with phone's who are using version 2.51. To solve, try to flash any recent SBF file. If you want to do a nandroid first, check if SD Recovery works for you.
Click to expand...
Click to collapse
So the SDcard problem seems to originate from the version. The solution which has been provided is to flash any recent SBF file. This is where I am stuck at present.
1)What SBF file is recommendable?
2) is it really required to do take a nandroid image?
Perhaps something to mention: I am working without phone SIM and with a 2 GB Kingston SD card.

Flash a froyo ROM, root and instal 2nt init. Best a non blur ROM (then you don't have to register)
If you don't want to go to eclair (void warranty, official upgrade for your country) you don't have use nand. Nordic is a good choose.
Sent from my MB525 using XDA

Hi,
thanks for the reply, greatly appreciated. No, I don't want to go back to eclair, since I do not have any warranty anymore....
Where can the ROMs be obtained? I stumbled onto the website as provided by Moto defy a beginners guide (grrr, I cannot provide URL's here) where a whole list of SBFs are given.
However, Nordic seems to be a Gingerbread SBF? Which one to pick in order to get CM working?
Thanks! TY

Problem has been solved.
I updated the phone with Motorola update manager to version 2.2.1.
After the update, the installation of CM worked perfect.
Regards, TY

[Q] Help w/ Bad Service

Hey guys can someone please give me some advice on what to do with my phone please....
Sprint
Model # - SPH-L720
Android Version: KitKat 4.4.2
Kernel Version: [email protected] #1
Build# - Negalite-WondeROM-NAE-r6
I rooted and installed this rom a few months back, im getting inconsistent service! i barely get data service in places i should be getting. i updated my PRL, Profile, and Firmware but still no change. i called sprint and they said you need to update the PRL but i already did that but they dont see it on their system that i did, maybe its because im rooted with a custom rom.
if anyone knows what to do or which rom i should install. please any help would be great. thank you

Flash STOCK rom :highfive:

Joku1981 said:
Flash STOCK rom :highfive:
Click to expand...
Click to collapse
can you post a link with the latest stock rom please? ive been searching and im confused because of the knox thing. i only see the 4.3 rom but i have 4.4 installed. can i flash to an older firmware?

jjacob158 said:
can you post a link with the latest stock rom please? ive been searching and im confused because of the knox thing. i only see the 4.3 rom but i have 4.4 installed. can i flash to an older firmware?
Click to expand...
Click to collapse
1. This is the latest firmware: HERE.
2. You can't flash older firmware.

[Q] your devide as been modified....

Hi, everytime I try to update I get this message.
your device as been modified. Software updates are not available.
I had a wile back rooted this Samsung S4, so im guessing is the knox sotware that is doing this.
I heard that we can force the update using Odin, Just dont know how.
Can it be done?
If any one can please help would be appreciated.
Samsung S4
Model SGH-M919V
Ansroid version 4.4.2
baseband version M919VVLUFNH3
kernel version 3.4.0-2588682 [email protected] #1
Built number KOT49H.M919VVLUFNH3
If any other info need please let me know.
Thanking all in advance.

http://forum.xda-developers.com/galaxy-s4-tmobile
This is the international S4 forum. Everything you need to know can be found at the link above. But to answer your question, yes, the update can be applied using Odin.

2poveiro said:
Hi, everytime I try to update I get this message.
your device as been modified. Software updates are not available.
I had a wile back rooted this Samsung S4, so im guessing is the knox sotware that is doing this.
I heard that we can force the update using Odin, Just dont know how.
Can it be done?
If any one can please help would be appreciated.
Samsung S4
Model SGH-M919V
Ansroid version 4.4.2
baseband version M919VVLUFNH3
kernel version 3.4.0-2588682 [email protected] #1
Built number KOT49H.M919VVLUFNH3
If any other info need please let me know.
Thanking all in advance.
Click to expand...
Click to collapse
This title appeared coz you rooted your device. You will have to download, unzip and flash the same firmware that you are using (HERE) via ODIN for receive future updates via OTA.

BOC4 Root help

Phone:
SM-G900V
Android 5.0
Baseband G900VVRU1BOC4
Kernel 3.4
Build BOC4 also
Hi, Ive had my Verizon GS5 for about a year now, and I just installed 5.0 Lolipop, and I hate it.. I want to root my phone and go back to KitKat.. Ive been reading through the forum and all the guides seem to be for BAC4 or something else.. I don't see anything that is explaining what to do for BOC4..
The one guide I was looking at was this one:
http://forum.xda-developers.com/ver...-to-downgrade-lollipop-5-0-to-kitkat-t3088571
Where someone in post #3 asks if it will work for BOC4, and it was stated to NCG retail stock instead of step 1.. If I download that instead of step 1, is everything else in the guide exactly the same? Im semi lost.. Im pretty noob to this, though I did root my GS3 which I found pretty easy to do..
Also if this is the wrong guide or if there is an easier guide to follow can someone link me to the steps I need?
I also read somewhere else about d/l superuser 1st? And it will not trip the knox counter?
Also do I need to backup all my phone settings and stuff before I start this whole process? And how do I go about that?
Thanks
**Edit: Is there also a way to backup all my setting like handcent and stuff so that I don't have to reconfigure all my font settings and colors and backrounds and so on?

Ok so I backup up my phone with Samsung kies, just hoping someone can point me to the proper guide to go from 5.0 BOC4 to Rooted Kit Kat
Thanks

Ok sorry for multiple replies here.. But Ive seemed to get myself now onto
Android : 4.4.2
Baseband: G900VVRU1ANCG
Build: KOT49H.G900VVRU1ANCG
I haven't gotten any feedback here so far, but maybe from this point someone can tell me how to root and get to 4.44 from here???
Please and thanks

you could try this thread for what you want: http://forum.xda-developers.com/showthread.php?t=2784880
sorry if i can't remember which firmware after NCG leads to 4.4.4

Thanks for the reply.. I am really lost at the moment..
So after I got my phone to this point:
Android : 4.4.2
Baseband: G900VVRU1ANCG
Build: KOT49H.G900VVRU1ANCG
I then d/l towelroot and made it rain. It seemed to work.. From there I then flashed (I think) the NI2 Firmware only kenrnel.tar file..
*EDIT
So now my phone says
Android: 4.4.2
Baseband :G900VVRU1ANI2
Build: KOT49H.G900VVRU1ANCG
Is this right? My baseband is NI2 and Build is NCG???? Im lost?
I then downloaded a root checker from the play store and ran it, and it said my phone was rooted.. I finally now was able to run SuperSu Pro, and it asked about updating binaries, and i clicked "normal", it then asked me the Knox detect, and I said disable..
So how do I get to 4.4.4 from here? And Im assuming im fully rooted?
I can see that nobody wants to help a noob at this, but it would really be great if someone can tell me where to go from here?
Please and Thanks