Hi All, I am on t-mobile uk and have a G1 which is on rainbow screen with system10 on it, I downloaded a Dream.img file but when I try to use it, the phone says Not allowed so it goes back to rainbow screen, where can i get the t-mobile g1 phone image as its not my phone but it will be if I can get it to work, as a friend gave it to me.... thanks for any help
You'll need the RC7 for being in UK (If I can remember it correctly) RC29 only works for US.
Related
hey all,
any help that any one can offer would be great. First off what had happen was that I was installing a new rom onto my G3 Wizard, the after it was complete the phone restarted but didn't get passed the loading windows screen. On top of that, now when I connect my phone the to the computer activesync doesn't read the phone or charge the battery. Is there anything I could do to fix this.
Read the Wiki (XDA-Wiki). Link button at top of this screen. Look at the Wizard section on how to unbrick your phone.
HELP.. ! Here ya go..
Uhm,, Yo.. Check.. Download the Original Rom again, put the PDA in boot loader and put the original Rom on it. Then ull be able to f*.. the rom up again ^^
Where can i download the old rom. for a 8125
8152
Wich operator ?
well the phone i'm working with is an cingular 8125 but i had it unlocked to work tmobile so which one should i install
Cingular,, Duuh.. You should always get original rom of the phone's provider.. If its an Original HTC.. Get HTC.. If its Cingular.. Get Cingular,, and so on..
thanks a lot loading the original rom worked
Great
Great to hear Bud.. Keep me up on the works..
Add me MSN or something..
[email protected]
Ok i was trying to get XM6 on it. And i got the error code 300 so i tryed this other rom to make it work"ROMUpdateUtility_Wizard_NoID" and now when i turn my phone on it just go straight to the 3 color dos looking screen it shows my IPL and SPL and thats it, i cant get out of it please help me !
Thanks
If any one can help me Get XDA Moible 6.0.0.0 working on my MDA i will paypal them some $money$
My aim is deathblooms237
U are in bootloder mode. Thats fine. U didnt bricked ur phone. Now u can softreset ur mobile. By infrared eye u will see a hole and with your pen restart ur device.
BUT FIRST you have to know if u have G3 or G4 model. if your ipl/spl is 2.21.0001 - with 3 zeros than u have g4. READ ALL ABOUT G4, cause if u use rom for g3 or any rom which isnt for wizard OR ANY ROM WHICH contains IPL/SPL u are SCREWED UP. YOUR mobile will die and u could just throw it away.
SAFE ROMS for g4 are: NBD, faria, OCTAIVOI's etc. See a few on this link: http://wiki.xda-developers.com/index.php?pagename=wizard_WM_6
AND you should also read ALL about sSPL method - GREAT, FANTASTIC WAY TO FLASH YOUR G4.
http://forum.xda-developers.com/showthread.php?t=329147
Ok i should have a G4 myILP is 2.26.0001 my SPL is 2.26.0001 and when i soft restart it it goes back everytime to the boot screen the 3 color thingy. i just dont know what to do, plz pretty plz help./ Whats the next step
this is the only roms or files i have used
English Update Utility Files G4
ROMUpdateUtility_Wizard_NoID
T-Mobile-UK_2.19.11_Radinly
Wizard_Love_2[1].26.10.2_WWE_Novii_CF2
XM6r3
Try flashing your operator's official rom back into the phone to begin with. That should get you at least a working phone again.
Check the XDA-Wiki (button on top of this screen) on the Wizard section how to troubleshoot or unbrick your phone
Ok i got it back to facotry reinstalled the tmboile software from the website but to give a heads up i have cingular useing a tmobile phone so its already unlocked. ok now i need to find away to install XDA Mobile 6.0.0. now quick question is this as close i can get to the windows mboile 6 eye candy, but thanks atlist i got my phone back up and running but can some 1 tell me the files i need to get started on XDA Mobile 6.0.0.
Thanks
Ok this is what happends i tryed to install XDA Mobile 6.0.0 and put the file ROMUpdateUtility_Wizard_NoID in the folder and click ROMUpdateUtility_Wizard_NoID and it installs and when it gets done it goes right back to the 3 color screen. am i doing something wrong, reason i use ROMUpdateUtility_Wizard_NoID is because i get error 300 with out it when i try the XDA Mobile 6.0.0 normaly.
I tried to downgrade my 5600 to wm2003se that was the original os and I had upgraded it to wm6 but want to go back and since I didnt make a backup of the rom I used the updater from Orange to try and downgrade it after following some instructions I saw on a website.
But now the phone just show the orange uk startup screen then goes into the bootloader I tried using the imate wm2003se update it updated successful but when I start the phone a get the imate startup screen and then it goes into the bootloader again. Another thing is that the updaters when I ran them (I reran the orange uk updater so the orange rom is now on the phone again) both show that there was no rom loaded to the phone, all the information the phone model and the other info are completely blank.
I've tried looking up how to fix it but the only solution all the sites give me I cant do cause I dont have a sd card and even if I did my computer cant read sd cards and I dont have a sd card reader either.
I'm sure your wondering about the version of my bootloader it version 1.x, sorry I cant be more specific cause the phone screen does work properly and the only way to get it to show properly most of the time is to push the end call button up and hold it there. A solution to that would appreciated as well but right now I'm more wanting a solution for the bootloader problem I'm having.
Upgraded my Titan from its Telecom stock rom (I'm from New Zealand) to the following:
RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_3.42.02_SPCS2.04_PPST_0619_Ship
But it no longer boots into Windows Mobile. It starts up as if it is going to boot, with a black Windows Mobile 6.5 screen coming onto the screen, and some numbers in red that then come onto the screen after a couple of seconds. The numbers on the bottom left are:
M-09
B-03
On the bottom right the numbers are:
P ACAAAAM-4070
R 1.47.00
D 3.56
Then it goes to another screen that says
HTC Windows Mobile
Powered by PPCKITCHEN
Once on this screen, nothing else happens. I can get into the Tricolour Bootloader Screen, which has the following numbers in the top red portion:
TITA100
SPL-1.04.0000
I have tried upgrading different things, but either the bootloader just goes to a screen that says "loading" and nothing else or it just comes up with a white bar that never moves off 0%.
Would really appreciate any help someone can give me on this. Would even consider sending to anyone who knew how to fix it, if they were pretty sure they could, as I can't seem to be able to do anything with it after days of searching forums, etc.
try renamed NBF file to TITAIMG.NBF put in <2G MicroSD card to flash
Yea, I have played around alot trying to do that. Used a standard MicroSD card, not SDHC. And still had no luck with all I did.
Note: I would even be willing to pay someone through paypal if they could help me fix it over the internet. Any takers?
You get this fixed yet? If not try locating a WinMo 6.0 shipped rom and try flashing that. Your bootloader is the stock non-gps version and it sounds like it does not like the new rom.
If you get it booted, then unlock with bootloader 2.40, then flash any 6.1 or 6.5 rom.
hi this is my first post and i'm a nooob at all this stuff but i pick things up quickly....
Anyway my problem is last night i hard hspl'd my htc hd2 phone which went ok said its been hacked succesfully...
Then i went and installed the magdlr111 to phone which went ok...... BUT it said when it finished my phone should show me black boot screen so i could flash the android it didnt do that it comes up with the welcome to o2 screen then doesnt do anything..
Just wondering if i have missed something importent or it will just not work on the o2 phone..... PLEASE HELP...