Well guys - after trying to figure out why this SD Card isnt being partitioned - i've gone through every procedure and it all ends the same.. the creation of an "Unknown" or "Other" Partition i've tried with minitool, with GParted, with CWM on 2 different phones - i've tried all sizes of ext partitions - it still comes out the same
im wondering whats wroing? can anyone enlighten me?
Your post is unclear at least to me, what are you trying to accomplish, can you give more details?
The only other thing I can think of is, if I remember correctly, you said you were putting an ext3 partition on it right?
I guess it couldnt hurt to try putting an ext4, other than that I'm stumped man.
Sent from my HTC HD2 using XDA App
Ok I see, use this formatter: Panasonic SD Formatter
Then use this tool: ext3 partition tool
Also look here: ext 4 help
Vylle said:
Well guys - after trying to figure out why this SD Card isnt being partitioned - i've gone through every procedure and it all ends the same.. the creation of an "Unknown" or "Other" Partition i've tried with minitool, with GParted, with CWM on 2 different phones - i've tried all sizes of ext partitions - it still comes out the same
im wondering whats wroing? can anyone enlighten me?
Click to expand...
Click to collapse
If you have aMagldr 1.13 installed, you can try CWR (Clockworld Mod Recovery) , i does the partition.
But very limited, only 1 ext 1 swap .
i've used CWR to make the partition - it didnt work
i sold the card some time back, i think i've concluded that the card probably was a fake card. next time i'll make sure to buy a genuine kingston card
Related
So I originally asked this in Amon_RA's recovery thread, but was kindly asked to move it here. So here's my issue.
My G1 is not recognizing or creating any ext partitions using either the manual parted method or the automatic script include in Amons recovery. Using the manual method to make ext2 I get the following error:
Error: Input/output error during write on /dev/block/mmcblk0
Retry/Ignore/Cancel
Fat32 gets created fine.
I used fdisk on my laptop to create the partitions and it seems to take, but once I put the sd card back into my phone it disappears. Taking the card out of my phone and back in my laptop, the ext and swap partitions are gone. Anyone have any idea as to what the problem could be, or is my card just pretty much bricked?
SpiggidyBob said:
So I originally asked this in Amon_RA's recovery thread, but was kindly asked to move it here. So here's my issue.
My G1 is not recognizing or creating any ext partitions using either the manual parted method or the automatic script include in Amons recovery. Using the manual method to make ext2 I get the following error:
Error: Input/output error during write on /dev/block/mmcblk0
Retry/Ignore/Cancel
Fat32 gets created fine.
I used fdisk on my laptop to create the partitions and it seems to take, but once I put the sd card back into my phone it disappears. Taking the card out of my phone and back in my laptop, the ext and swap partitions are gone. Anyone have any idea as to what the problem could be, or is my card just pretty much bricked?
Click to expand...
Click to collapse
try paragon partition manager 9.0. see if that works for you. if not hit up newegg or meritline for a new card
Bad SD Card
b0ricuaguerrero said:
try paragon partition manager 9.0. see if that works for you. if not hit up newegg or meritline for a new card
Click to expand...
Click to collapse
I've been pulling my hair out for the last day trying to figure out why it would act like it partitioned fine, but then when I did a 'print' in parted it would only show one FAT32 partition. I had the EXACT problem the OP was having.
Half my day spent looking for some other resolution and then realized I had another SD card with me (just half the size) and tried it in the Recovery with that one with complete success. No errors or anything. I'm trying Paragon Partition Manager for my larger card, but not finding an option for the ext2 (or other UNIX) formats. It's the free 2010 version so I'm not sure if that makes a difference.
Bad SD Card - Paragon Killing USB Drivers?
vwyankee said:
I've been pulling my hair out for the last day trying to figure out why it would act like it partitioned fine, but then when I did a 'print' in parted it would only show one FAT32 partition. I had the EXACT problem the OP was having.
Half my day spent looking for some other resolution and then realized I had another SD card with me (just half the size) and tried it in the Recovery with that one with complete success. No errors or anything. I'm trying Paragon Partition Manager for my larger card, but not finding an option for the ext2 (or other UNIX) formats. It's the free 2010 version so I'm not sure if that makes a difference.
Click to expand...
Click to collapse
So, version 9.0 has the options for the needed Linux partitions. With that, it would appear I have a bum 8GB card. As stated, the 4GB works just fine - both Transcend Class 6 cards. On one PC it was having a difficult time in the formatting process after creating the partition and I had to kill the application via task manager in Windows. Then it got to where my USB port drivers couldn't start so I couldn't read via SD card adapter or USB cable to the phone with the card mounted. I'm in IT so I've dealt with drivers failing before, but I'm finding myself having to ask my friend Google now as even after uninstalling the drivers I have the same result. I'm afraid it might be due to the Paragon application. More on that below.
I installed Paragon on another laptop at home and it went through the process successfully (at least appeared to) with the 8GB card. Joy had returned to my frustrated being and I proceeded to use the restore image to upgrade from ext2 to ext3 - success! - Then it was wipe and flash. All seemed well in the world until I went into the settings after getting into the OS for the first time (again) to look at my secondary SD Card space and found it at "unknown." Looking at the card via Paragon Partition Manager once again it was showing as only two partitions instead of three with the ext3(2) being "unformatted." Just to be sure, I put in the 4GB card to verify in Paragon it's showing as expected (three partitions in correct formats).
Being the stubborn sod I am, I came to work determined to get the 8GB card working and installed Paragon on a test machine (I run a large testing lab) and redid the partitions. Removing and re-adding the partitions on the 8GB with "success" then simply unmounting and mounting the card to the PC revealed the card is definitely the major flaw all along. After mounting it came up as just the two partitions again - FAT32 and unformatted for the 2nd, even though it was only 10 seconds ago it showed successful creation of the three and formatting. Because I'm one to verify a verification I repeated my steps to see the same result. However, not only did I see this same result I now DIDN'T see the SDCard via Explorer, but could via Paragon. Inspection of Device Manager showed the exact same thing as on my home laptop that stopped being able to read the Android phone with card or adapter with card.
So, my last couple days of fighting and frustration were all because of the SD card of which I've never had a problem with it storing data for the last year with many times reformatting and re-applying data. Odd, to say the least. I am back up and running, but now I have USB drivers failing to start problem on two PC's! This is not a concern with the one at work since I'll just restage it, but I'm afraid it might take restaging my laptop for this to be fixed which as we all know is just not very convenient.
Anyhow, the lengthy explanation was more for those like me that were Googling/searching for a long time for a similar situation.
Cheers.
I have a similar problem. One of my SD cards of 1 GB has ext 2 and 3. But the main one of 2 GB can be partitioned only with ext 2. I am using Amon Recovery 1.5.2. When I press create ext 3 I get an error and not even from console it doesn't work, I get upgrade_fs not found.
adair said:
I have a similar problem. One of my SD cards of 1 GB has ext 2 and 3. But the main one of 2 GB can be partitioned only with ext 2. I am using Amon Recovery 1.5.2. When I press create ext 3 I get an error and not even from console it doesn't work, I get upgrade_fs not found.
Click to expand...
Click to collapse
I would say it IS the same problem and that your card is not being partitioned properly. The reason it can't upgrade from ext2 to ext3 is because there isn't ext2 to begin with even though the partition process gave a "success" result in the Recovery. I'm using the same Amon 1.5.2 as well. It somehow will not format as the space will be there unformatted if you open the card in a partition application with GUI.
Going to the SD Card settings from within the OS you'll see the SD Card secondary use grayed out and showing "unknown."
So what is the solution? What if I buy a new card Class 6 that can't be partitioned?
adair said:
So what is the solution? What if I buy a new card Class 6 that can't be partitioned?
Click to expand...
Click to collapse
I would say keep your receipt and return it for another. I've had issues with SD cards before where they kept going corrupt within a day of use and just returned them for another (same brand, same model) that would work fine.
It's not a hardware problem, I managed to partition it after some tries. I think that Amon RA recovery does not recognize the sd card sometimes. It worked after I hit the reboot button in recovery and pull out the battery. After that I went back to recovery and I could partition it.
vwyankee said:
So, version 9.0 has the options for the needed Linux pblah blah blah blah
.... windows .....
blah blah blah
Googling/searching for a long time for a similar situation.
Cheers.
Click to expand...
Click to collapse
bug a friend with a linux///mac machine and partition it with that. i've seen lots of problems with usb/partitioning on windows ,and never had the same problem on mac/linux. 3 microsd cards were 'unusable' according to vista, reeformated just fine with osx.
give it a shot.
adair said:
It's not a hardware problem, I managed to partition it after some tries. I think that Amon RA recovery does not recognize the sd card sometimes. It worked after I hit the reboot button in recovery and pull out the battery. After that I went back to recovery and I could partition it.
Click to expand...
Click to collapse
You verified it worked with looking in the SD card and Phone storage settings?
I've also discovered that the 4GB card that I was able to partition without a problem was one I should've thrown out as I couldn't remember where it came from until after dealing a couple days of constant lockups on the phone (now that things are running off the SD). It was thrown in a drawer due to going corrupt every few days where the data on it was lost/gone/unreadable. Going out to get a new SD card today.
To the statement about bugging someone with a mac/linux, that doesn't appear to be the issue here since it won't work with using Gparted either (at least in my case).
Just an FYI update, that after buying a new (not the lowest end) SDHC class 6 8GB card, it partitioned just fine in the recovery image along with being able to upgrade the ext2 to ext3 then ext4. Now I'm finally seeing the speedy benefits running Cyanogen's latest ROM. No issues since replacing with a good card.
Another thread, i think i'm a totally noOb
Today, i downloaded Wildpuzzle Rom .. and flashed it ... everything went fine
I used this tutorial...
http://baert.ulyssis.be/2010/10/13/wildpuzzle-rom-for-htc-wildfire/
this was okay...but in the 4. point ... "Creating an EXT partition on the SDCard"
there was a problem ... after i selected the fat32 and ext2 size, and the phone rebooted .... i had an error message .... "E:failed to seek in /cache/update.zip" ...
i've tried a lots of time...always rom manager failed to made the right partitions...
so i moved on, and i tried to made the partitions with manually in windows xp
i've downloaded Paragon Partition Manager 9.0 to do the partitioning....
After i had the 2 partition, 1500MB Fat32 and 300MB ext2, the pc rebooted to make the changes .... and then i had an error message (i can't remember, cause it dissapeared quickly).....
when xp started again i saw my sd card is not working .... windows said, "You must format the SD card" .... and it was only 512 kbyte the full size
i tried a lots of applications, which recovery, or fix sd cards, but nothing helped :/
any solution?!
i wouldn't like to throw away my sdcard if its not necesarry
thx.
lazlo
Try gparted, linux boot cd, make fat32 partition first then make ext3 partition no need for swap on phone
Sent from my HTC Wildfire using XDA App
i have tried gparted, in ubuntu live cd, but when i insert the sd card to the reader nothnig happen ... and gparted stop working :S .. its freeze or something like that
Did you try to delete the partition and creating a new drive? Like when you buy a new disc... You have to create a new partition and a new logical drive...
You can use Paragon partition manager...
I guess gparted was loading, it take a little while to read the entire HDD.
Sent from my HTC Wildfire using XDA App
LogicXLz' said:
Did you try to delete the partition and creating a new drive? Like when you buy a new disc... You have to create a new partition and a new logical drive...
You can use Paragon partition manager...
Click to expand...
Click to collapse
No thx, Paragon partition manager killed my SD card ... so i won't use that app again, never...
But meanwhile, i could fix the SD card with Ubuntus's gParted ... i've tried a lots of time ... reinserted the card to the reader .... and finaly it recognised it ... and can made a valid partition ... so the problem solved
anyway, thx the idea
A very simple and quick solution to this kind of problem (for other users / future reference, now that you've solved it): put it in your photo/video camera and format it. This would do a low-level format of the SD card, allowing you to see and use it in Windows. Any camera with this function will do (Nikon, Canon, Panasonic, etc.)
phunctionist said:
A very simple and quick solution to this kind of problem (for other users / future reference, now that you've solved it): put it in your photo/video camera and format it. This would do a low-level format of the SD card, allowing you to see and use it in Windows. Any camera with this function will do (Nikon, Canon, Panasonic, etc.)
Click to expand...
Click to collapse
thx a lot dude ... this is a simple and a good idea
never would thought this
Good one!!! It is a very simple solution. However if it works with "camera formating", then the issue with SD card is not too bad. I mean, it's not corrupted in a way to be unusable or "bricked" in some way.
And thus, I think you needn't even bother using some other gadget, just a sufficient knowledge on partitioning tools and you can make it work on your computer. I still believe it could be repaired with Paragon Partition... 've been using that program ever since and never had any problems...
Anyway, the more options avaliable, the more possibilities for a success! ;-)))
Hy every body, does some one heard about SD damaged after a FAT32/EXT4 Format?
Let me explain myself:
I've SD-FROMATTED my sd, then using GPARTED LIVE SD in my HD2 in MAGLDR
i've created two partitions:
1/ FAT32
2/ EXT4
I do have click on "apply".
Now, my SD is unreadable and unrecognized by my phone.
The oly way i have to use it now is FAT32 only.
It is the third time i do the partitioning on this SD and it's the first time it does'nt work
HEEELP!!!
I've heard about file corruption using MAGLDR USB MassStg...Is-it true
Thanks for your anwers
No answer? Nobody?
download panasonic SD Formatter 3.0 and that will sort it no probs.
matt
Try Panasonic SD Formatter as mentioned above. With the stock SD card I've had problems formatting using a card reader, however. I had to flash back to a windows mobile rom, connect to PC as a hard drive (not active sync) and re-format the card via that method. It's a pain, but try this if you're really stuck.
Thanks i'll try those methodes
i use minitool partition manager
but first go to control panes, then computer management, devices, find your sd card and right click on it. select create new disk label and that should solve your problem.
now after that run minitool partition manager and you 'll be able to see your sd car as new disk (or something) just create a new partition as (fat32, primary) format maybe that could solve your problem.
(the same thing happen to mee and i was about to cry because of it)
(sorrry for bad english, i'm still learning)
Thanks kof102. I'm on it
ttersu said:
Hy every body, does some one heard about SD damaged after a FAT32/EXT4 Format?
Let me explain myself:
I've SD-FROMATTED my sd, then using GPARTED LIVE SD in my HD2 in MAGLDR
i've created two partitions:
1/ FAT32
2/ EXT4
I do have click on "apply".
Now, my SD is unreadable and unrecognized by my phone.
The oly way i have to use it now is FAT32 only.
It is the third time i do the partitioning on this SD and it's the first time it does'nt work
HEEELP!!!
I've heard about file corruption using MAGLDR USB MassStg...Is-it true
Thanks for your anwers
Click to expand...
Click to collapse
Also, as a long time Android recovery user (I went through several Android phones before coming around to the HD2), I would highly recommend formatting your card using Clockwork Recovery.
HyoImowano said:
Also, as a long time Android recovery user (I went through several Android phones before coming around to the HD2), I would highly recommend formatting your card using Clockwork Recovery.
Click to expand...
Click to collapse
One problem can be that when try create a Ext partition using CWR it only creates an Ext2 which isn't really the best.
I've seen on differnt French forums that i'm not alone. Is there a Risk formatting and partitioning an SD Card, that is not done for, to damage allocation Table?
My SD is dead now. Not even my PC, my Phone or else are abble to find my SD. Have you heard about that?
No answer? No body?
try using EASEUS Partition Master 7.0.1 Home Edition with this u will be able to see what is going on.. hope it helps.
Thanks, Have you allready heard about that befor?
I had a problem with my SD it didn't come up on my pc too,when I was playing with the dual booting partition making for wp7 and android. some how it messed up and SD didn't come up so I found this program Easeus and some how managed it to work again it was a simple problem that all I had to do is to recreate the partition and only after that u can format it. if it doesn't exist u format nothing actualy lol.
hope u have the same problem.
I've tried EASUS but it was unable to read my SD...
I think it's dead now...
I've bought an other one and part it with CWM. It's EXT2 but it work perfectly!
Maybe it could be nice to check if nobody else had the same than me...and tell it to Master COTULLA!
No body else?
Hello, I need some help with partitioning my Micro SD card. It is an 8GB class 6, and I know the basics, but that is it. What I really need to know is HOW to partition my SD card and what the hell 'EXT2/3/4' is all about. Now, I have had different suggestions as to what to do, I have to disc all ready with Gparted installed, and I am ready to use it, yet I have been told by some members of XDA the partitioning isn't even a requirement for ROMs. Is this true? I have a Euro HD2, and recently when trying to partition my SD card through Clockwork Mod (CLK) my SD card's memory dropped from 8GB to around 6.5GB. I have tried formatting it as I always do, but nothing seems to come of it. Anyway, what I would like to know is how and why I need to partition, especially EXT2/3/4 as this particular partition has come up on most ROMs I wish to install.
I hope someone can shine some light on this issue.
Thanks in advance -- Joe
(PS - I will click thanks for anyone who gives useful information)
Sklar said:
Hello, I need some help with partitioning my Micro SD card. It is an 8GB class 6, and I know the basics, but that is it. What I really need to know is HOW to partition my SD card and what the hell 'EXT2/3/4' is all about. Now, I have had different suggestions as to what to do, I have to disc all ready with Gparted installed, and I am ready to use it, yet I have been told by some members of XDA the partitioning isn't even a requirement for ROMs. Is this true? I have a Euro HD2, and recently when trying to partition my SD card through Clockwork Mod (CLK) my SD card's memory dropped from 8GB to around 6.5GB. I have tried formatting it as I always do, but nothing seems to come of it. Anyway, what I would like to know is how and why I need to partition, especially EXT2/3/4 as this particular partition has come up on most ROMs I wish to install.
I hope someone can shine some light on this issue.
Thanks in advance -- Joe
(PS - I will click thanks for anyone who gives useful information)
Click to expand...
Click to collapse
First thing
Closckwork Mod is NOT CLK, they are different
if your memorcy card dropped from 8GB to 6.5~ , then your partioning was succesfull , what you cant see is the EXT partion that only android can see,
Go ahead and flash a EXT supported ROM , have fun
mally2 said:
First thing
Closckwork Mod is NOT CLK, they are different
if your memorcy card dropped from 8GB to 6.5~ , then your partioning was succesfull , what you cant see is the EXT partion that only android can see,
Go ahead and flash a EXT supported ROM , have fun
Click to expand...
Click to collapse
Sorry, I didn't realise they were different (CLK - Clockwork Mod) But if you say that the partitioning worked, then does that mean I have done all of the partitions, or just one?
You just need one partition not many ... so I guess you can find out by trying an ext supported ROM... try coredroid 1.6
Sent from my HTC HD2 using XDA App
So I have this Issue I found my 16gb HD2(I no longer have the hd2) that's I guess corrupted I can view the files move them to my desktop but I cant format the SD, I tried my Nexus One, digital camera, Windows 7, Macbook,ubuntu, mini partition tool and testdisk with no results. I remember this issue happen when I tried to run android through SD maybe you guys know why. thanks
Some sd cards especially ones that have been bought on ebay or overseas have a memory hack in them. What happens is the sd card shows 16gb but in reality it may only have 6-10gb. The hack provides the sd card to show more space then is actually there. You can use it just fine with no problems at all but once you go over the actual memory it really has & not just shows you then get a slew of corrupted files on your sd card leaving it almost useless. This is only 1 example, others causes could be if you take an ad card out while you transferring files to it. In the end there is little you can do and what I would of suggested you've already tried. (minitool) this has helped me fix a card that I was transferring files when my power went out. This will probably not help but have you tried different ports on your computer? What happened when it was in you nexus?
Sent from my Desire HD using XDA App
htccraze said:
Some sd cards especially ones that have been bought on ebay or overseas have a memory hack in them. What happens is the sd card shows 16gb but in reality it may only have 6-10gb. The hack provides the sd card to show more space then is actually there. You can use it just fine with no problems at all but once you go over the actual memory it really has & not just shows you then get a slew of corrupted files on your sd card leaving it almost useless. This is only 1 example, others causes could be if you take an ad card out while you transferring files to it. In the end there is little you can do and what I would of suggested you've already tried. (minitool) this has helped me fix a card that I was transferring files when my power went out. This will probably not help but have you tried different ports on your computer? What happened when it was in you nexus?
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Yeah I learn this lesson on my chinese 32gb lol but on my 16gb sd was actually the one that came with the hd2 so I know for a fact is legit. everytime I put it on my N1 it tries to format it and then a message pops out saying card unmounted. I also tried my good old nokia n82 which usually Nokias are really good at formatting corrupted cards it doesn't give me the choice of formatting the card. Im wondering of their some type of lock on the sd card.
there is a really small lock on the front of a sd card but none that i know of on a micro sd. did you use the minitool partition wizard or the data recovery program? if you only used the partitioning wizard i would try the minitool data recovery program found here.
Running mini tool this is what I get it wont fix it though https://picasaweb.google.com/lh/photo/3-oc0r_Bbv5qrYncR3IzCZaCRbbB6vENK-AyJ2O_CkI?feat=directlink
running minitool data or minitool partitioner? it looks like minitool data if i remember correctly. yeah, it says "minitool found errors on disk but will not fix them because diskcheck was run without fix parameters." i would try it again but select "check and fix detected errors" see if that helps. if it dont help then i would suggest to wait for advise from someone a little more knowledgeable about this.
htccraze said:
running minitool data or minitool partitioner? it looks like minitool data if i remember correctly. yeah, it says "minitool found errors on disk but will not fix them because diskcheck was run without fix parameters." i would try it again but select "check and fix detected errors" see if that helps. if it dont help then i would suggest to wait for advise from someone a little more knowledgeable about this.
Click to expand...
Click to collapse
I tried using both none of them cant format the SD card or at least make it usable.
josemedina1983 said:
I tried using both none of them cant format the SD card or at least make it usable.
Click to expand...
Click to collapse
what about good ol' Check Disk from Windows Explorer?
Another program is SD Formatter 3.0.
Try it and play with the options.
SD formatter is pretty good i must say. Here is another one that might be of some use. I have a corrupted flash drive around somewhere so i'll try and find that. maybe I can play around with it to see what might work and report back. I would also take a look at this link as it provides some very useful information about sd cards. you can find that here, please make sure you read the section on "Formatting is required". This will explain why you may be running into problems along with what the cause might be.
Yea the same thing happened to me with my 8 gig card, i even tried formatting it at best buy and with a camera and still wouldn't format. So i just had to buy a new one.