I love the cm7 and wish someone would make a cm7 rom for the D2.
Its pretty much impossible with the locked bootloader. Cm7 needs a custom kernel that the locked bootloader doesn't allow, so were stuck with stock.
Sent from my DROID2 GLOBAL using XDA App
well that sucks.
Try liberty, it's about as good as it gets at the moment. I think keyjar is also working on a gummyJar GB version, which should be a solid rom as well. There is a working UD port for D2, but it's still on RC2 and hasn't been updated in a while, though I ran it for a few weeks and it was pretty solid. Liberty GB is also in the works, though not publicly available atm. CM7 isn't really necessary for the D2, since most of what you would get can be had in other roms currently available, just via some different means.
any way to get the lockscreen gestures currently?
Cm7 DOES NOT need a custom rom. It will run better if it does but it's not required. But we don't have aosp Rome such as cm7 because the locked bootloader makes it hard to make things work
Sent from my DROID2
Alright I wanna clear this up.
Cyanogenmod is a custom rom. We can install those on our Droid 2/X devices with Koush's Bootstrap tool. That said, we cannot install a custom kernel. Thus, cm-kernel for Droid 2/X is probably not going to happen anytime soon. However, that is not to say that Cyanogenmod 7 requires a specific kernel. I see no reason why Cyanogenmod 7 could not run on the stock Motorola kernel.
Moving on, cvpcs is working on a Cyanogenmod port for Droid X (and thus also Droid 2). When the rom will be stable, however, is unclear. As far as I understand, it's not really working.
-Zane
More importantly, this is the development section, not the request section. There is no request section for a good reason.
Sent from my DROID2 using XDA App
Ok, for those who aren't searching these days...
1 - Cyanogen won't come out officially with a D2 port until Moto unlocks the bootloader
2 - Cyanogen actually doesn't need a custom kernel to do what it does
2a - Go use Liberty..its effectively Cyanogen sans a 'custom kernel' and does all the same.
Me, I'm flashing back to stock for a while. Liberty 2.0 is causing me some headaches as of late and I can't download @#$ from the market it seems cause its like everything is fricken blocked now.
jediman said:
Ok, for those who aren't searching these days...
1 - Cyanogen won't come out officially with a D2 port until Moto unlocks the bootloader
2 - Cyanogen actually doesn't need a custom kernel to do what it does
2a - Go use Liberty..its effectively Cyanogen sans a 'custom kernel' and does all the same.
Me, I'm flashing back to stock for a while. Liberty 2.0 is causing me some headaches as of late and I can't download @#$ from the market it seems cause its like everything is fricken blocked now.
Click to expand...
Click to collapse
Thanks for clearing this up
Also motorola probably will never unlock the bootloaders on their phones so getting CM7 will be impossible
ljbaumer said:
Also motorola probably will never unlock the bootloaders on their phones so getting CM7 will be impossible
Click to expand...
Click to collapse
With xda theres no impossible
ljbaumer said:
Also motorola probably will never unlock the bootloaders on their phones so getting CM7 will be impossible
Click to expand...
Click to collapse
I thought Motorola stated that they would unlock the bootloader, but it was up to the carriers whether or not they would allow for it.
Jordan umts is the codename of the Defy... which is also locked.... and we are the 4th device in cyanogen 7 number of installs stats
BPMOmega said:
I thought Motorola stated that they would unlock the bootloader, but it was up to the carriers whether or not they would allow for it.
Click to expand...
Click to collapse
If it were there carriers fault then y do some phone come locked and some come unlocked? Motorola is just trying to put the blame on someone else
Sent from my DROID2
whezzel said:
If it were there carriers fault then y do some phone come locked and some come unlocked? Motorola is just trying to put the blame on someone else
Click to expand...
Click to collapse
Originally, yes, it was Motorola's policy to lock the bootloader, but they had announced recently that they would leave the bootloader unlocked, at least for phones on carriers that allowed it (so, I would at least guess that AT&T would be out of the picture, since they've even been controlling of the ability to sideload apps).
Working on it come help if you can:
http://forum.xda-developers.com/showthread.php?p=14705596
wwonka69 said:
I love the cm7 and wish someone would make a cm7 rom for the D2.
Click to expand...
Click to collapse
Ok, I'll do it.
lol.
Anyone got the link to the most recent version?
Official droid 2 nighlies. Cm7 with GB kernal is being developed over at rootzwiki
http://download.cyanogenmod.com/?device=cdma_droid2
Related
can this be done ?
Have you been following what is happening AT ALL? lol
Apparently not..lol
sorry, i have not. i just cancelled my services with sprint to move over to verzion droid x. i just ordered two for me and the wife.
Im running cm6 on my evo, would like to see it on droid x.. i have not been following but will be soon.
can cm6 be installed if i root ?
Not yet, although probably soon.
Follow @AllDroid on Twitter for updates.
stilv said:
sorry, i have not. i just cancelled my services with sprint to move over to verzion droid x. i just ordered two for me and the wife.
Im running cm6 on my evo, would like to see it on droid x.. i have not been following but will be soon.
can cm6 be installed if i root ?
Click to expand...
Click to collapse
Not yet. We have root but the bootloader is locked down. We are waiting for a custom recovery from birdman but that will only allow use to flash custom system files but not a custom kernel. So one day soon it may be possible for a cm6 hybrid without the cyanogen kernel. Im not to sure about that though.
Sent from my DROIDX using XDA App
Basically, it could happen someday, but don't count on it. That goes for all custom roms (specifically with custom kernels).
It should be possible, just might take them a bit of work to get everything working on the stock kernel. First thing we'll see will probably be vanilla versions of the stock ROM, without Motoblur (yay) and with a few other tweaks. Judging by Koush's Twitter I'd guess we'll see a Clockworkmod release today or tomorrow, and we'll probably see some vanilla roms within a few hours of that release. CM6 will take a bit longer but I would be surprised to not see at least a partial build within a few weeks.
.......but then again I could be entirely off. =P
As I just then ordered my Milestone 2 I have some general questions:
1. Is there this thing called "eFuse" on my Milestone 2 and how does it affect my user experience? Is this "eFuse" already hacked so we can do whatever we want?
2. Milestone 2 = Droid2 ? Will there be differences in software updates? e.g. droid 2 gets gingerbread. Can I download this update on my Droid2?
3. Is there any way to inactivate moto blur?
I'm fairly new to this corner of the forum, coming from the xperia x1. Latter one was a fine device but I'm looking forward to some new experience! Tell me what you have learned =)
eFUSE is basically a lock on the bootloader. Until it is cracked, and it currently isn't, we're stuck with whatever Motorola puts in the bootloader. This means no custom kernels and no going back once you've updated to the latest bootloader.
Not quite. It appears that Droid 2 ROMs will not work with the Milestone 2.
Not at the moment. Fission for the Droid 2 has Blur removed but it won't work on the Milestone 2.
oTToToTenTanz said:
As I just then ordered my Milestone 2 I have some general questions:
1. Is there this thing called "eFuse" on my Milestone 2 and how does it affect my user experience? Is this "eFuse" already hacked so we can do whatever we want?
Click to expand...
Click to collapse
There are workarounds in place on the D2 and D2 Global and they can be applied to the Milestone 2 as far as I've seen mostly just a bootstrapped recovery and an exploit to root and Various ROMs.
oTToToTenTanz said:
2. Milestone 2 = Droid2 ? Will there be differences in software updates? e.g. droid 2 gets gingerbread. Can I download this update on my Droid2?
Click to expand...
Click to collapse
Depends on the update I believe the D2 G and the Milestone 2 have newer software than the D2 original so updates will depend on a separate version being released for the different firmware and radios (D2 is CDMA, D2 G is CDMA/GSM, and Milestone is only GSM as far as I know) I believe some of the devs are trying to develop ROMs for the Milestone 2 and some have been for the D2 G already (but they have to be careful because the SBF isn't out yet.)
oTToToTenTanz said:
3. Is there any way to inactivate moto blur?
Click to expand...
Click to collapse
On the D2 and D2 G (and soon to be Milestone 2 from the sound of it) there is a specific ROM, Fission that has no blur unless you add some specific blur components (like camera and music application).
oTToToTenTanz said:
I'm fairly new to this corner of the forum, coming from the xperia x1. Latter one was a fine device but I'm looking forward to some new experience! Tell me what you have learned =)
Click to expand...
Click to collapse
I would read through how things are done on the D2 and D2 G because these devices have a locked bootloader because of eFuse and Moto so we don't have new kernels (only kernel modules added) so highly modded ROMs like CM6 and things of that sort can't be ported straight over without heavy tweaking but i'm not a dev so that's better explained by someone who knows firsthand about that stuff.
Thank-you, Spitemare and newk8600
So there is a locked bootloader that only allows small modifications (or kernel-moduls) but the kernel itself can't be changed, right? That means f.e. if we have Android 2.2 on our Droid/Milestone 2 we can't have any Android 2.1 or 1.6 ROMs on our device, right? But modificated 2.2 ROMs that have the same kernel run on our devices... but I have to be careful to distinguish between Milestone and Droid updates/themes/tweaks...
Furthermore official updates have to be for Milestone instead for taking Droid 2 updates, right?
What is SBF?
edit_ puts phone back to stock mode, right? What does SBF stand for?
What are you using Droid 2 or Milestone 2?
Btw: there is this possible rooting. What possibilities do I have with a rooted device - like admin rights on a computer?
oTToToTenTanz said:
So there is a locked bootloader that only allows small modifications (or kernel-moduls) but the kernel itself can't be changed, right? That means f.e. if we have Android 2.2 on our Droid/Milestone 2 we can't have any Android 2.1 or 1.6 ROMs on our device, right? But modificated 2.2 ROMs that have the same kernel run on our devices... but I have to be careful to distinguish between Milestone and Droid updates/themes/tweaks...
Click to expand...
Click to collapse
Yup. We're stuck with whatever kernel Motorola provides in their latest update. Once you apply such an update there is no going back.
oTToToTenTanz said:
What is SBF?
edit_ puts phone back to stock mode, right? What does SBF stand for?
Click to expand...
Click to collapse
System Boot File. A SBF basically returns your device to the stock deployment. It will be just as it was when you opened the box.
oTToToTenTanz said:
What are you using Droid 2 or Milestone 2?
Click to expand...
Click to collapse
Droid 2.
oTToToTenTanz said:
Btw: there is this possible rooting. What possibilities do I have with a rooted device - like admin rights on a computer?
Click to expand...
Click to collapse
You can remove installed apps like the crappy Blockbuster app. You can also use third party apps to enable wireless tether. Rooted devices can also be overclocked and run apps that can require more permissions than would be available otherwise, like automatic switching from 2G to 3G.
oTToToTenTanz said:
What are you using Droid 2 or Milestone 2?
Click to expand...
Click to collapse
Droid 2 aswell.
oTToToTenTanz said:
Btw: there is this possible rooting. What possibilities do I have with a rooted device - like admin rights on a computer?
Click to expand...
Click to collapse
Spitemare is correct but you can't just think computer you have to think linux/unix specifically. In windows viruses and such can do lots of chaos even if they don't have admin rights but linux/unix(which android is based on) anyone trying to get into the sensitive files of the system need root access or those files are locked down and not accessible.
I am thinking about getting a Droid X this afternoon. With the OTA update is it rootable and if so with what? Thank!
floridatank said:
I am thinking about getting a Droid X this afternoon. With the OTA update is it rootable and if so with what? Thank!
Click to expand...
Click to collapse
Not the OTA. You will need to sbf back to froyo and then upgrade to the pre rooted GB
Sent from my DROIDX using XDA App
bigshotrob22 said:
Not the OTA. You will need to sbf back to froyo and then upgrade to the pre rooted GB
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
I went ahead and got it. It has 2.3.3 on it, Will Gingerbreak work on that? Thanks!
floridatank said:
I went ahead and got it. It has 2.3.3 on it, Will Gingerbreak work on that? Thanks!
Click to expand...
Click to collapse
Nope! Like I said its unrootable
Sent from my DROIDX using XDA App
Unrootable...
But that doesn't mean you can't root.
SBF to froyo.
Flash the 2-part gingerbread .zips.
Flash a custom rom (Liberty?)
Or stay on the froyo kernel...
and try MIUI or Cyanogen.
Be careful and read as much as you possibly can before starting. Myself and at least one other on here with the latest iteration of the X have ended up with boot looping or totally non-responsive devices.
I have started a thread with my findings. I am by no means an expert but I do have much experience with rooting devices going all the way back to the PPC6700.
Good luck.
getting stuck in a bootloop is part of the exploration process IMHO.
At least once per new ROM I'll flash something 'just to see what happens' and end up SBF'ing back. Just make backups between steps if you aren't sure about what will happen next.
it would be nice if one of the devs or people who work on rooting or someone in the know would at least comment if we are going to get a real root with the OTA
i mean im running froyo with CM7 but i sure would like the new firmwares for all the radios flashed and then be running CM7
so if someone could give us some kind of update at least saying no one is even remotely working on trying to gain root on 4.5.596 Official OTA or that yea we are working on it but it is a ***** and taken longer then we expected
that lil bit of info goes a long ways
thanks
I am not aware of any dev working on this ATM.
I don't think rooting 596 ota is critical 2nd unit has opened up alot of new doors and the attention has shifted. However I have flashed all of drew gardens latest and ran cm4dx until nightly 47. Now I'm daily MIUI and loving it, despite locked bootloader the cdma_shadow still has alot of options.
Sent from my DROIDX using XDA Premium App
to my understanding .596 has better battery life and signals are better for wifi and cellular (at least more stable and less drops)
i do not know if this is true but i have read/heard alot of ppl saying the battery life is better on .596
after all there is a .596 for some reason and its not a lil bump from 2.2.340 its pretty big
anyhow someone really needs to figure this out as the baseband has changed....i mean there is the pre-rooted rom .596 that works great so we know it can be done.
whats the big deal...let us have it
m16-maniac said:
anyhow someone really needs to figure this out as the baseband has changed....i mean there is the pre-rooted rom .596 that works great so we know it can be done.
whats the big deal...let us have it
Click to expand...
Click to collapse
the big deal is that there isn't a readily found exploit for the ota, the pre-rooted was done with a diff. method (brute force? recompiled?) but the versions are the same regardless
no ones holding back a secret root method, there just isn't a dev interested in spending huge amounts of time to recreate what already exists
i think it would be interesting to create a batch script that sbf's a phone and installs the pre-rooted .596 but all hidden behind a random animation so the user doesn't see what's happening. if i call it a 'one click' root method lots of people who don't seem to want to take the readily available pre-rooted gb for whatever reason would likely be happy. yeah i understand that if it includes a sbf then data may get lost, but if i said in the instructions of my 'app' that it would happen and they should have backups, people would still likely use it
sorry, but i just don't understand why so many people who want root are seemingly against using the pre-rooted option, as most of them don't have the knowledge to find an exploit or a root method from scratch themselves, so they are still using the work of someone else...
<Disclaimer>I'm going out on a limb here with limited knowledge of the X. <End disclaimer>
From what I read and I don't remember where, the rooting of an X involves a 2nd init method by which it takes control of the initial init. I believe I read the original init isn't able to be exploited and this is the basis of some of the more complicated methods of rooting the X.
If someone knows more about this please correct me or chime in.
I had an Incredible prior. The rooting was more comprehensive and simple. I believe that is because the bootstrap and recovery were not as difficult to get into. That being said, personally, I may be going back to another HTC device if the folks light years smarter than me aren't interested in developing a root method like the other devices out there.
Anyone with luck flashing a Milestone X w/ a custom ROM?
Running Rooted 2.3.5 w/bloatware removed (but backed up) along w/ DROID X Bootstrapper.
Have made my first full system backup using this tool.
If complete ROMS could not be used, what components would I need to modify, replace, ... exchange to get it to work on C-Spire (say, Verizon).
I've heard that there are some ROMS that don't mess with the baseband and other communications settings, files, frequencies, protocol, etc... What are these type called if they exist? Where can I find them? Are these a safer alternative to full ROMS?
Will DX Bootstrapper get the job done? Reports ClockworkMod REcovery v2.5.0.6.
I would recommend staying off custom roms for the Milestone X until a working sbf for us makes an appearance. Myself and ngholson both had issues where we got stuck in a bootloop and the sbf just output more errors until a replacement device was needed.
Rocheforte said:
I would recommend staying off custom roms for the Milestone X until a working sbf for us makes an appearance. Myself and ngholson both had issues where we got stuck in a bootloop and the sbf just output more errors until a replacement device was needed.
Click to expand...
Click to collapse
agreed. [10chars...............
another thing to consider, since we cannot sbf at this time, is that the bootstrapper will break your ability to install any future ota updates. it modifies the logwrapper and makes a copy called logwrapper.bin, however, uninstalling the bootstrapper and restoring the logwrapper file does not correct the problem. best i can tell the only answer that i can find when this happens is to sbf back to stock... well you see where this is going.... currently we cannot do this, so unless you never want the ota upgrades i do not recommend installing the bootstrapper on cspire's milestone x.
oh well nevermind went back and re-read your post, you already have the bootstrapper installed. (at least you did it after ota)
here is a link to the post that has the sbf that is reported to work with cell south (cspire) http://forum.xda-developers.com/showthread.php?t=1117885
maybe someone else can try it again and report back.
daywalker04 said:
SBF flash for MB809 - Milestone X Generic North America
SHADO_X6_3.1.39_SHADOW_BP_C_02.06.00R_AP_BP_Flex_1E_signed_secure_dist_1ff_P3_USERBLD.sbf.gz
http://www.filesonic.com/file/11766...x_1E_signed_secure_dist_1ff_P3_USERBLD.sbf.gz
Compression MD5 - BF942D55992C774446F24B56116649A1
SBF MD5 - 2EAEBD1540D563114523BEB09539A8AF
Click to expand...
Click to collapse
abcleanonme said:
Well I can confirm it works on Cellular South.
Sent from my MilestoneX using XDA Premium App
Click to expand...
Click to collapse
I can confirm that the old sbf it does not work after ota update. I had to get a new phone. I have rooted, but I am not installing a bootstrapper until a working sbf is available. Hopefully that will happen soon.
I am on C spire out of Byram, MS and can in fact confirm that "Droid X Bootstrapper" from the market indeed works like a charm on the Milestone X with stock versions 2.2.2 and 2.3.5.
I use "Super One Click" to root, then the same prog to "Allow non market apps" then buy "Droid X Bootstrapper" from market, run it. Reboot while holding camera button and power button,,,,voila
Confirmed roms that I have and currently run or ran: CM 7 nightlies, Liberty 1.5, and Fission 2.5.7 DroidX
---------- Post added at 07:12 AM ---------- Previous post was at 06:57 AM ----------
A little trick I figured out to sbf back to stock,,,,download the latest ota from Cspire "Blur_Version.3.2.6.MB809.ACG-CellSouth.en.US" blah blah,,,,,rename it to "update.zip",,,,not "update.zip.zip"put it on the root of your sd card and boot into stock recovery or clockwork mod and run update.......BLAM! Simple as that...
Brickster said:
A little trick I figured out to sbf back to stock,,,,download the latest ota from Cspire "Blur_Version.3.2.6.MB809.ACG-CellSouth.en.US" blah blah,,,,,rename it to "update.zip",,,,not "update.zip.zip"put it on the root of your sd card and boot into stock recovery or clockwork mod and run update.......BLAM! Simple as that...
Click to expand...
Click to collapse
i tried that too it didn't work for me.
I dunno,,,, it worked for me twice. I tried to update cwm from the app using the flash for droid x and it messed up my recovery. So i updated to the latest ota from Cspire via the stock android recovery by naming the ota file to update.zip and running it like that.
I'm running CM7 nightlies for the droid x on the Milestone x....you might have to remove the line of code in the update file that asked for Kernel assert,,,,I can't remember, but seems like it kept giving me an error that says, "assert failed: run_program("/tmp/check_kernel") but after that all was fine.
Sent from my Milestone X using XDA App
Brickster said:
I dunno,,,, it worked for me twice. I tried to update cwm from the app using the flash for droid x and it messed up my recovery. So i updated to the latest ota from Cspire via the stock android recovery by naming the ota file to update.zip and running it like that.
I'm running CM7 nightlies for the droid x on the Milestone x....you might have to remove the line of code in the update file that asked for Kernel assert,,,,I can't remember, but seems like it kept giving me an error that says, "assert failed: run_program("/tmp/check_kernel") but after that all was fine.
Sent from my Milestone X using XDA App
Click to expand...
Click to collapse
is there a reason that your not using the new liberty rom and used 1.5?
tylorjefcoat said:
is there a reason that your not using the new liberty rom and used 1.5?
Click to expand...
Click to collapse
Nah, it's a cool rom .....I'm just a flash whore. I like cm7 nightlies the best though.
Brickster said:
Nah, it's a cool rom .....I'm just a flash whore. I like cm7 nightlies the best though.
Click to expand...
Click to collapse
what has been the best in your opinion? i just upgraded from the hero and was running aosp and loved it.
i actually like some of the blur apps, hard to believe that i like a custom ui on android lol.
i have been reading on the droid x vs milestone x and i am weary of flashing update that also includes the radio/baseband.
what version of cm7 nightfiles are you on? any complaints?
Brickster said:
I dunno,,,, it worked for me twice. I tried to update cwm from the app using the flash for droid x and it messed up my recovery. So i updated to the latest ota from Cspire via the stock android recovery by naming the ota file to update.zip and running it like that.
I'm running CM7 nightlies for the droid x on the Milestone x....you might have to remove the line of code in the update file that asked for Kernel assert,,,,I can't remember, but seems like it kept giving me an error that says, "assert failed: run_program("/tmp/check_kernel") but after that all was fine.
Sent from my Milestone X using XDA App
Click to expand...
Click to collapse
I am getting the exact same error. Where do I need to go to eliminate this line of code. I have setup everything else up until this point and it works perfectly with recovery and everything. A bit of help please.
thenig said:
I am getting the exact same error. Where do I need to go to eliminate this line of code. I have setup everything else up until this point and it works perfectly with recovery and everything. A bit of help please.
Click to expand...
Click to collapse
Open the ROM zip and go: META-INF/com/google/android/ and in the updater-script, remove the code that asked for Kernel assert.
tylorjefcoat said:
what has been the best in your opinion? i just upgraded from the hero and was running aosp and loved it.
i actually like some of the blur apps, hard to believe that i like a custom ui on android lol.
i have been reading on the droid x vs milestone x and i am weary of flashing update that also includes the radio/baseband.
what version of cm7 nightfiles are you on? any complaints?
Click to expand...
Click to collapse
I too just upgraded from the Hero....and I still love that phone! My hero has had every rom known on it,,,and some that weren't even made for it....It's unbrickable! LOL
Yea, the Milestone is a little more finicky than the Hero, and with Motorola's locked bootloaders, one could get in a fix..
I've ran the past 3 nightlies and currently on cm_shadow_full-154.zip.
I tell ya, they all have some kind of bug somewhere. It all depends on what you want to put up with. Me, personally, I like the stock ota 2.3.5 from Cspire. It works. Plain and simple. Now, I would like some of the CM7 options and spare parts.
Brickster said:
Open the ROM zip and go: META-INF/com/google/android/ and in the updater-script, remove the code that asked for Kernel assert.
Click to expand...
Click to collapse
Open the updater-script with notepad (new to this) and found no mention of kernel assert. Almost there...a bit more help would get me in.
It should be the top 3 lines, if I remember correctly.... I checked it out on my phone to make sure but,,,, duh, I already removed it (face palm).
It's in there somewhere.
Run install again and right down all the errors... Then try to find them in the script file.
I'm new to this also (as far as motorola stuff) too. And I take risks that most people wouldn't..... Hell, if I mess something up bad enough , just sbf back.
I'll try to help you more when I get off work... Maybe send you my roms that have already been fixed.
Make sure to turn off script and signature asserts off in cwm... Sometimes that helps.
Sent from my Milestone X using XDA App
Brickster said:
It should be the top 3 lines, if I remember correctly.... I checked it out on my phone to make sure but,,,, duh, I already removed it (face palm).
It's in there somewhere.
Run install again and right down all the errors... Then try to find them in the script file.
I'm new to this also (as far as motorola stuff) too. And I take risks that most people wouldn't..... Hell, if I mess something up bad enough , just sbf back.
I'll try to help you more when I get off work... Maybe send you my roms that have already been fixed.
Make sure to turn off script and signature asserts off in cwm... Sometimes that helps.
Sent from my Milestone X using XDA App
Click to expand...
Click to collapse
Thank you sir! I'm gonna try that.
Brickster said:
I too just upgraded from the Hero....and I still love that phone! My hero has had every rom known on it,,,and some that weren't even made for it....It's unbrickable! LOL
Yea, the Milestone is a little more finicky than the Hero, and with Motorola's locked bootloaders, one could get in a fix..
I've ran the past 3 nightlies and currently on cm_shadow_full-154.zip.
I tell ya, they all have some kind of bug somewhere. It all depends on what you want to put up with. Me, personally, I like the stock ota 2.3.5 from Cspire. It works. Plain and simple. Now, I would like some of the CM7 options and spare parts.
Click to expand...
Click to collapse
I despised that phone lol, wait i take that back, i guess i had "phone" envy lol Mine was a rom whore as well, it was rooted almost immediately after i got it with the ole gold card method.
the ota 2.3.5 is actually a good CLEAN rom, i do like the fact that it is so clean, just need a few tweaks as you said from the cm7 build, status bar tweaks ect..
may build up one.
built a rom for a tablet we are selling here, BIG learning curve but the locked boot-loader throws a real curve ball
now, have you gotten it to overclock?
Brickster said:
. Hell, if I mess something up bad enough , just sbf back.
Click to expand...
Click to collapse
that still amazes me. i haven't tried it on 2.3.5, but when i did it from stock 2.2.2 it was a no go.... maybe it will only work if you are already on 2.3? hell i dunno... motorola has me chasing my tail.... like everyone else, i came from the hero too, that was one awesome little phone. i read somewhere that the motorola bootloader had been cracked by someone on here but..... not sure what ever happened there.....
Hey all:
So I'm really interested in changing my rom, but everywhere I turn I'm told I can't do so because the bootloader is locked on the droid x. I had always been under the impression it was the same for the milestone x since they're both motorola, and basically the same phone except the milestone is debranded and used on smaller cdma networks, rather than verizon... However, as I scour the web in search of enlightenment, I find a discussion about the bootloader, where it was implied that it was verizon, not motorola, who wanted the bootloader locked and that on the non-droid (non-verizon) x's this isn't an issue. Can anyone verify that the bootloader is indeed unlocked on the milestone x, our give me a "safe" way to do so? And if so, what roms would work?
Thanks
I haven't seen anything that says that the bootloader is unlocked on the Milestone X. Verizon may not want an open bootloader but I doubt the smaller carriers do either. At least mine wouldn't.
Sent from my Milestone X using Tapatalk 2
jmgib said:
I haven't seen anything that says that the bootloader is unlocked on the Milestone X. Verizon may not want an open bootloader but I doubt the smaller carriers do either. At least mine wouldn't.
Sent from my Milestone X using Tapatalk 2
Click to expand...
Click to collapse
Hey, another kentucky boy. I'm assuming that means you're on app wireless, which means we should have pretty much the exact same phones. Did you take the 2.3.5 update around the end of last year? Have you tried any custom roms? found any that work on the milestone?
Yeah, I'm with Appalachian! Wireless. I played around with some custom ROMs before the Gingerbread update, but I haven't risked it since. I may give it another go once I'm closer to my contract being up. Now that would probably change if I could get a good SBF image to fall back to if I break something.
Sent from my Milestone X using Tapatalk 2
jmgib said:
Yeah, I'm with Appalachian! Wireless. I played around with some custom ROMs before the Gingerbread update, but I haven't risked it since. I may give it another go once I'm closer to my contract being up. Now that would probably change if I could get a good SBF image to fall back to if I break something.
Sent from my Milestone X using Tapatalk 2
Click to expand...
Click to collapse
Yeah its pretty crappy that Appalachian has never released an sbf.. They're sort of weird about stuff like that... But I saw somewhere on the interweb something about a "generic north american milestone x sbf". Our phones don't seen to have any sort of model customization for app wireless, so maybe that would work?... I hear that the ics gummy rom works on the milestone x, but I haven't tried it yet. I'm new to all this hacking and modding stuff.. I finally have it rooted and found this ics launcher in the market called holo launcher that works pretty well, and I've been experimenting with some metamorph themes (got the r2d2 lock screen...oohh yeahhh...lol), so I don't know if I'll risk it. Maybe when my contact ends in november and I'm during outside the store at 4 in the morning waiting in line for the black friday sale, I'll cave and give it a shot... Lol
hayescooper19 said:
Hey all:
(Snip) Can anyone verify that the bootloader is indeed unlocked on the milestone x, our give me a "safe" way to do so? And if so, what roms would work?
Thanks
Click to expand...
Click to collapse
After successfully flashing my Milestone X with CyanogenMod I noticed my Google Market was not included. I found it and renamed to update... and placed it on my sdcard. No go, I later tried to replace the bootloader and bricked my X. They gave me another one and now I have Gingerbread. From what I read in the wiki I would have to do all suggested backup apn stuff and flash back to froyo or previous version.
The problem I had when I flashed the Shadow ROM, the kernel was not updated, so I decided there was no real benefit to all this and it might be easier to just keep the latest carrier update and install a new theme.
Good luck,
Elliot
Sent from my Kindle Fire using Tapatalk 2
I'm pretty sure the bootloader has not been unlocked. The kernel will remain stock no matter what rom you flash.
Sent from my DROIDX using Tapatalk 2
elliot_goldstein said:
After successfully flashing my Milestone X with CyanogenMod I noticed my Google Market was not included. I found it and renamed to update... and placed it on my sdcard. No go, I later tried to replace the bootloader and bricked my X. They gave me another one and now I have Gingerbread. From what I read in the wiki I would have to do all suggested backup apn stuff and flash back to froyo or previous version.
The problem I had when I flashed the Shadow ROM, the kernel was not updated, so I decided there was no real benefit to all this and it might be easier to just keep the latest carrier update and install a new theme.
Good luck,
Elliot
Sent from my Kindle Fire using Tapatalk 2
Click to expand...
Click to collapse
Did you flash the latest gapps on top of CM?
Sent from my DROIDX using Tapatalk 2
The generic .SBF won't work on our phones. It would sort of work prior to the Gingerbread update but after it will brick your phone. I think I have it saved somewhere though if your feeling adventurous.
Sent from my Milestone X using Tapatalk 2
jmgib said:
The generic .SBF won't work on our phones. It would sort of work prior to the Gingerbread update but after it will brick your phone. I think I have it saved somewhere though if your feeling adventurous.
Sent from my Milestone X using Tapatalk 2
Click to expand...
Click to collapse
Thanks, but no thanks. This phone has got to last me another few months, so adventure will have to wait.
So, if I use this vortex rom, and it turns oit I don't like it or it somehow interferes with my phones functionality, I can revert back to my old settings via nan droid backup, right?
hayescooper19 said:
So, if I use this vortex rom, and it turns oit I don't like it or it somehow interferes with my phones functionality, I can revert back to my old settings via nan droid backup, right?
Click to expand...
Click to collapse
Yes, you don't even have to wipe anything when restoring a backup.
Sent from my Galaxy Nexus using Tapatalk 2
Thanks! I may give it a shot after all.
One last question, just to be on the safe side.. Installing this rom shouldn'thave any effect on my baseband/radio/data coverage/etc, should it? Sorry if its a dumb question. just gotta be careful until my contact runs out.
One last question, just to be on the safe side.. Installing this rom shouldn'thave any effect on my baseband/radio/data coverage/etc, should it? Sorry if its a dumb question. just gotta be careful until my contact runs out.
Click to expand...
Click to collapse
It should not, and in the event something should go wrong or not work correctly, you always have the option of restoring a backup or SBFing.
Sent from my Galaxy Nexus using Tapatalk 2
Let me know how it goes. I'm interested in hearing your progress.
Sent from my Milestone X using Tapatalk 2
How did you successfully flashed your Milestone X to CyanogenMod? I have a DX that runs on MX now, and I can't get it on Cmod7.
elliot_goldstein said:
After successfully flashing my Milestone X with CyanogenMod I noticed my Google Market was not included. I found it and renamed to update... and placed it on my sdcard. No go, I later tried to replace the bootloader and bricked my X. They gave me another one and now I have Gingerbread. From what I read in the wiki I would have to do all suggested backup apn stuff and flash back to froyo or previous version.
The problem I had when I flashed the Shadow ROM, the kernel was not updated, so I decided there was no real benefit to all this and it might be easier to just keep the latest carrier update and install a new theme.
Good luck,
Elliot
Sent from my Kindle Fire using Tapatalk 2
Click to expand...
Click to collapse
DroiZ said:
How did you successfully flashed your Milestone X to CyanogenMod? I have a DX that runs on MX now, and I can't get it on Cmod7.
Click to expand...
Click to collapse
Root first, then use Droid 2 Bootstrapper to install recovery, update recovery via ROM Manager, then install CyanogenMod and Gapps.
Sent from my Galaxy Nexus using Tapatalk 2
jmgib said:
Let me know how it goes. I'm interested in hearing your progress.
Sent from my Milestone X using Tapatalk 2
Click to expand...
Click to collapse
Hey! Sorry for the long delay. To give you an update, I WAS able to flash vortex RC1 without a problem. However, I wasn't crazy about the design and I couldn't get the Wi-Fi to work even with the Wi-Fi lib fix, so so I was forced to Nandroid back to stock. However, I tried vortex reloaded and not only did I like the design better, but the Wi-Fi worked!! I used it for a while, then did a Nandroid and downloaded and flashed liberty 3 v2, again without a hitch. I can't decide which I like better, so I just go back and forth between the two. I'm so indecisive... lol... but if you're you're interested, you can download liberty and RC1 from the same place. Just Google "blur-based roms on .621/.604" and click the top result, which should be rootzwiki. You can also find an apex rom there. As for vortex reloaded, you'll have to do a little more digging, but it shouldn't be hard to find...
As for choosing a rom, it's all personal preference. But the one thing I can NOT STRESS ENOUGH is that, when using a milestone x, the rom needs to be modified for the .621/.604 hack. As for 2nd-init roms, I have no idea because I've never looked into them. Hope this helps!!
2nd init roms can be used on .621/.604.
Sent from my Galaxy Nexus using Tapatalk 2