[Q] Magic 32a Flashing problems - myTouch 3G, Magic General

Hey you guys
I recently installed amon ra's recovery v. 1.7 on my magic 32a (radio 6.3.5 something) after I rooted my phone, of course.
Now, I thought that with the new recovery I would be easily able to flash a custom rom onto my magic. This was however not so easy, because the recovery behaves in a very weird way. Whenever I tell it to flash a new rom from a .zip image, or wipe the phone, or anything, it just reboots my magic and thats it. Also, the recovery happens to freeze quite regularly when I don't act very quickly. E.g. when I boot into recovery mode and don't touch the phone for the first 5 seconds, it wont respond any longer.
So, I'm probably doing something wrong here. I would appreciate any help from anyone. (and btw, i have the official android 1.5 sense rom installed on my magic, os I cant use rom manager either, since it only supports android 1.6 upwards.)

Look at the root guide in my signature..
Do step 0, 1, 2, 5 and 7 only.
It should flash the recovery partition one more time.
Hopefully it will fix your problem :0)

mumilover said:
Look at the root guide in my signature..
Do step 0, 1, 2, 5 and 7 only.
It should flash the recovery partition one more time.
Hopefully it will fix your problem :0)
Click to expand...
Click to collapse
hey, thanks for the quick response. I still have a few questions though, since I am quite a newb. So when I type all of those commands into cmd, doesnt my device need to be connected to the computer somehow? I read somewhere earlier that I simply connect it using the "mount" funtion, the problem is that that doesnt seem to work anymore for my magic, because after I hit "mount" it simply goes back to "usb connected" without acutally mounting. So ..how do I connect the device to the PC while entering the commands?

ok... my bad..
Try to read the ENTIRE guide... then do the steps i mentioned above :0)
Don't mount it... just connected... but again.. read the guide.

thanks a lot
I didnt use your method to flash the image, but the hero recovery works way better than the one I had before. I managed to flash a rom now. So happy ;D

ok i think i just did a bad mistake
i installed rom manager after i had flashed an android 2.1 rom on my magic. THen i told it to flash some rom from my sd card and also wipe some data, or something. Now my magic gets stuck on the magic bootscreen, like it keeps looping. Did i brick my phone ..or is there a way to fix this? please help me, (

most likely is that the rom you flashed doesn't have a compatible kernel for your phone.
Just boot into recovery and flash a rom that is compatible.

cant boot into recovery ..it just keeps looping

Then you will need to boot into fastboot and reflash a working recovery.
Clockwork has issues flashing the clockwork recovery sometimes.

to boot into fastboot i need to hold power and back, right? ..that doesnt work either. again, it just keeps looping.

so, guys ..did i brick my phonne..?? :S

da robat said:
to boot into fastboot i need to hold power and back, right? ..that doesnt work either. again, it just keeps looping.
Click to expand...
Click to collapse
you're probably not doing it right. you should still be able to get into recovery or fastboot and install a different recovery. i'm using RA-magic+v1.7.0.1 recovery it has bugs but pretty stable.

so what am i doing wrong??

just realized when i connect the phone to my pc over usb and then boot it, it connects to the pc for a second or less and then disconnects again. Dont know if this helps anyhow.

pull battery, put battery back in. hold back and push power.
Should be good.

tried that like 50 times. phone just keeps looping ..like, it restart over and over again.

What you have is what hundreds before you had when they used Rom manager.
The system will not boot into anything.
My advice is to never use Rom manager for 32A device.
The fix:
Keep pushing the back button while the system reboots... just mash the **** out of it..
I helped out someone before you, and he did it for over an hour or so...
It's a timing issue...
Good luck

haha ..so is there still hope?
cheers for all the answers ;D

i do have one question though, actually.
Shall i just press the back button continuously ...while it keeps looping, or should i rather restart the device after each loop and hold the back button?

just mash the back button.

Related

stuck at splash screen, have tried all the solutions.

Hello, I am having some issues and I've tried all of the fixes on several different forums including this one.
I wanted to root my phone so I followed Amon's guide and successfully went from the Tmobile released 1.6 to the rooted 1.5 in the guide. I then wanted to update to the rooted 1.6 but was having issues with trying to install the update. While in the safe mood I asked it to extract update.zip about 3 times before it finally opened it and it extracted everything really quickly!
I then tried to reboot the phone but it stayed at the green MyTouch 3G splash screen without going anywhere. I've tried all the tricks of taking out my battery, unplugging the USB, any form of combination I could.
I'm told my phone isn't bricked, only stuck but my computer isn't picking up the phone either. It doesn't say it can't read the USB device and fastboot still says waiting for devices.
Can some one please help me with my problem?
Thank you,
Difinitus said:
Hello, I am having some issues and I've tried all of the fixes on several different forums including this one.
I wanted to root my phone so I followed Amon's guide and successfully went from the Tmobile released 1.6 to the rooted 1.5 in the guide. I then wanted to update to the rooted 1.6 but was having issues with trying to install the update. While in the safe mood I asked it to extract update.zip about 3 times before it finally opened it and it extracted everything really quickly!
I then tried to reboot the phone but it stayed at the green MyTouch 3G splash screen without going anywhere. I've tried all the tricks of taking out my battery, unplugging the USB, any form of combination I could.
I'm told my phone isn't bricked, only stuck but my computer isn't picking up the phone either. It doesn't say it can't read the USB device and fastboot still says waiting for devices.
Can some one please help me with my problem?
Thank you,
Click to expand...
Click to collapse
What do you mean by safe mode? Which donut ROM are you trying to flash? Which recovery image do you have? How long was it stuck on the splash screen. You need to give more details for us to be able to help out. What radio and spl do you have?
I meant safe mode by where you select the option to extract update.zip.
I was trying to flash Amon's 1.6 32A Rom. Even though my phone states 32B I followed his instructions on how to Root the Mytouch and he was using 32A stuff so I figured if it worked OK, I was now running on 32A instead of 32B.
I was using RAv1.2.0H.img from his original guide. I dont know what radio and spl I have. There wasn't really a guide on updating ROMs so I just tried the same basic steps.
I hope this is more helpful, I am doing my best to learn everything, I am still fairly new to modding a phone. (my last phone was a Blackberry 8100).
Difinitus said:
I meant safe mode by where you select the option to extract update.zip.
I was trying to flash Amon's 1.6 32A Rom. Even though my phone states 32B I followed his instructions on how to Root the Mytouch and he was using 32A stuff so I figured if it worked OK, I was now running on 32A instead of 32B.
I was using RAv1.2.0H.img from his original guide. I dont know what radio and spl I have. There wasn't really a guide on updating ROMs so I just tried the same basic steps.
I hope this is more helpful, I am doing my best to learn everything, I am still fairly new to modding a phone. (my last phone was a Blackberry 8100).
Click to expand...
Click to collapse
I'm not sure what you mean by extract update.zip. I think you are talking about fastboot there. Have you tried to flash the rom in the recovery image? you know, by pressing power and home to get to the recovery, then flashing it through there. go into fastboot by pressing power and back and it will tell you what radio and spl you have. once you have that, write that so we can further get a grasp as to your problem. if in fact you still have the 32A configuration, you might want to flash over the 32B radio and and try to flash a 32B rom.
That is my problem, I can't get past the "MyTouch 3G" green screen. I've tried the Home button, Back button, Vol Down button and holding them for several minutes with no result, it stays at the very first screen when it turns on.
I've tried flashbooting from adb but it says "waiting for devices" and my computer isn't picking up any kind of device.
I'm having the exact same problem except im stuck on the vodafone screen. I also tried flashboot form adb but "waiting for devices" is shown and pc wont detect the device.
Did this before.
If you can get into recovery mode, Hold Home button while powering on, you can restore a nandroid backup, if you took one, or put the sappimg.nbh file or the correct items to flash whatever rom.
I had a stock 1.5 Mytouch. I wanted to root and get the 1.6 version of cyanogen, forgot to flash the HTC_ADP_1.6_DRC83_rooted_base as part of the process and had got stuck in the neverending mytouch logo.
If you can get into recovery:
wipe, then put the update.zip files directly on the card.(use a SD adapter, ...)
Choose apply any update from SD
Choose the base files, then the rom if its a newer version
Once those two updates run, reboot the phone.
My never ending logo disappeared, and the phone booted. Newb mistake on my part.
Wait at least a minute or two once this is done.
since the phone is stuck on the original logo and isnt responding to buttons when loading up... do we manually remove and reinsert the battery while holding the home button?
I have tried getting into recovery mode, but it doesn't do anything past the splash screen. Holding the home button while trying to power on the device won't do much.
hey difinitus keep me updated if u somehow get it to work
Even when you take the battery out for a significant time it turns on immediately to the logo screen. Whats the longest you have left the phone sitting at the logo screen.
A small thought, since it was trying to load a rom you had on your memory card, try taking the battery out, and removing the memory card, and then turn it on and wait a bit and see if you get a different result. Its a thought.
If that doesnt work put the memory card back in and turn it on and once its on remove the memory card.
Perhaps the rom on your memory card is corrupt and it is unable to continue to load it, you could even try putting the rom on again using your memory card reader and your computer, thus erasing the existing one.
try plug usb in to phone
take battery out
prees and hold home button
re-insert battery while still holding button
let go after about 3-5 sec
have you tried getting into fastboot by holding back and powering on the phone once you took out the battery? cuz fastboot doesn't initialize after the splash screen, it just pops up as soon as you hit back and power
@Tech no boy; I have tried using several different update.zip and a .nbh and also tried reformatting.
@sitimber; have tried that before, the splash screen still pops up. It just vibrates once and goes to the logo, with any combination of buttons and steps.
@tazz9690; Yes, no matter what I do it still goes to the splash screen. I've been saying that for several posts now.
you might have a bricked phone then. call up t-mobile and get it returned under warranty. if you are 100% positive that you will not be able to get past your splash screen, then the return center will not be able to prove that you have modded your phone, and they will send you another phone.
you might have a bricked phone then. call up t-mobile and get it returned under warranty. if you are 100% positive that you will not be able to get past your splash screen, then the return center will not be able to prove that you have modded your phone, and they will send you another phone.

Is my HTC Magic totally bricked?

I bought a Rogers HTC Magic for a pretty cheap price. It had The Rogers 1.5 Sense UI update on it. I decided I wanted to root it and load other ROMs, etc. So I read that the easiest method was to use Universal Androot to root it, and ROM Manager (from the Market) to flash the appropriate recovery image.
So, I installed both apps. I first ran Universal Androot and rooted. I confirmed root through ADB and also Super User permissions. I then restarted the phone just for peace of mind. After the restart, I ran ROM Manager. It automatically popped up and asked me if I was running an Ion/My Touch or an HTC Magic. I selected HTC Magic, because that's what this is. So then it flashed the recovery image and restarted the phone. When it restarted it went to the Rogers boot screen for a few seconds, and then started a loop of restarts. That's all it does now. It shows the Rogers screen for a few seconds, goes black and reboots over and over. I have tried booting into HBOOT, Fastboot, and into recovery. I cannot boot into any of them. One thing I did notice is that when I'm pressing any of the combinations (volume down + power, home + power, menu + power) for a very brief half a second right before the phone restarts, the bottom of the screen says "ClockwordMod ..." where ... is the version of the image (I'm at work without the phone, so I don't recall the exact number there).
So, is this thing officially a paperweight now, or is there some sort of hope?
Thanks.
Paul
Well, I don't know if you are full-bricked but here is what went wrong. The HTC Magic recovery is incorrect for the mytouch3g (at least the 32b). There was a top option for "saphire/mytouch 3g" which is what you should have chosen. So, you can't load the incompatible recovery. Can't you boot back into the rom you were using? The recovery flash shouldn't have messed with it. If you can, boot back in and flash the correct mytouch3g recovery in rom manager.
adrift02 said:
Well, I don't know if you are full-bricked but here is what went wrong. The HTC Magic recovery is incorrect for the mytouch3g (at least the 32b). There was a top option for "saphire/mytouch 3g" which is what you should have chosen. So, you can't load the incompatible recovery. Can't you boot back into the rom you were using? The recovery flash shouldn't have messed with it. If you can, boot back in and flash the correct mytouch3g recovery in rom manager.
Click to expand...
Click to collapse
Okay. That's weird. I mean, my phone is a Magic so choosing the option for the Magic instead of the Ion/MyTouch seemed to make sense.
Anyway, I cannot get anywhere. Holding vol+ and power does nothing, neither does home and power or back and power. Are there any other tricks to getting anywhere beyond this endless restart loop?
Thanks.
Starting to think I'm screwed.
PaulieORF said:
Starting to think I'm screwed.
Click to expand...
Click to collapse
You may be, I'm not sure exactly what state you are in but the recovery you installed was for a magic 32a (that you have) with a 3.x radio (that you don't have)
The rogers sense rom uses the 6.x hero radio and needs a hero recovery.
The mt3g uses a 2.x radio thus yet another recovery.
Try booting with volume down to see if you can get into the hboot/fastboot screen, but I think you tried this already.. you may also try letting it loop unplugged until the battery drains it may error out giving you access again..
Besides that there is the option of jtag and fixing the software stack that way.
ezterry said:
You may be, I'm not sure exactly what state you are in but the recovery you installed was for a magic 32a (that you have) with a 3.x radio (that you don't have)
The rogers sense rom uses the 6.x hero radio and needs a hero recovery.
The mt3g uses a 2.x radio thus yet another recovery.
Try booting with volume down to see if you can get into the hboot/fastboot screen, but I think you tried this already.. you may also try letting it loop unplugged until the battery drains it may error out giving you access again..
Besides that there is the option of jtag and fixing the software stack that way.
Click to expand...
Click to collapse
Thanks for the reply!
Right, I cannot get into fastboot or hboot. I'll try running the battery down when I get home today. Interesting idea.
Unfortunately running the battery dead with restarts didn't do the trick.
Any idea if there's any place I can send it to who has the smarts to jtag recover this thing?
Thanks.
me too
I did the same thing on a 32B. Rooted. loaded ROM Manager. Ran the recovery, I choose the Ion/MT3G option. tried to load CM6-FroyoRedux-v1.7-32b-blk.zip. Now it's stuck in the boot screen.
tmokeith said:
I did the same thing on a 32B. Rooted. loaded ROM Manager. Ran the recovery, I choose the Ion/MT3G option. tried to load CM6-FroyoRedux-v1.7-32b-blk.zip. Now it's stuck in the boot screen.
Click to expand...
Click to collapse
I don't think it's the same thing.
I rooted, loaded ROM Manager and installed the recovery. I was never even able to get into recovery in order to try to load any ROMs.
I have a Rogers magic, and its a 32a. One way to fix it is to go to the HTC website and punch in your serial number and download the rogers update. Only problem is that will make it a pain to root again. But should fix that reboot loop. But do that as a last resort to get the phone running again.
Sent from my HTC Magic using XDA App
nate_benji said:
I have a Rogers magic, and its a 32a. One way to fix it is to go to the HTC website and punch in your serial number and download the rogers update. Only problem is that will make it a pain to root again. But should fix that reboot loop. But do that as a last resort to get the phone running again.
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
The phone does not identify itself to the computer, so this doesn't work.
The program should try to put the phone into fastboot mode, and install the upgrade. Have you tried pulling the battery and pressing the power button + back, once the battery is installed again?
Sent from my HTC Magic using XDA App
nate_benji said:
The program should try to put the phone into fastboot mode, and install the upgrade. Have you tried pulling the battery and pressing the power button + back, once the battery is installed again?
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
Oh yes. I've gone crazy trying every key combination with every combination of taking battery out, plugging it in, USB cable attached, detached, etc.
The phone never identifies itself as a piece of hardware to the computer in the 5 seconds between reboots.
I had the same problem yesterday, and i was doing the same rooting with Universal Androot and flashing recovery witch Rom Manager (choose the same options). I tried to go into recovery and then it started to bootlooping the whole time.
I was pretty scared when that happens, can't open fastboot menu and the only thing that my phone was showing was HTC logo and a quick blink of clockwork sign over and over.
I don't know exactly how i managed to fix it, but it started to work when i quickly plug off baterry and i immiediatly plug it in (I was doing it at the exactly time when the phone reboots) while holding the power button.
Now my magic turns on, but recovery won't work (just flash for a moment, and reboots) and it always say at the beginning of booting system that SD card was removed which means i can't use any SD card.
I hope it somehow helped you.
naparstekk said:
I had the same problem yesterday, and i was doing the same rooting with Universal Androot and flashing recovery witch Rom Manager (choose the same options). I tried to go into recovery and then it started to bootlooping the whole time.
I was pretty scared when that happens, can't open fastboot menu and the only thing that my phone was showing was HTC logo and a quick blink of clockwork sign over and over.
I don't know exactly how i managed to fix it, but it started to work when i quickly plug off baterry and i immiediatly plug it in (I was doing it at the exactly time when the phone reboots) while holding the power button.
Now my magic turns on, but recovery won't work (just flash for a moment, and reboots) and it always say at the beginning of booting system that SD card was removed which means i can't use any SD card.
I hope it somehow helped you.
Click to expand...
Click to collapse
I tried doing this quickly for about 5 minutes this morning but didn't get it to go anyway. I can try some more after work today.
When you say it booted after this battery pull thing, do you mean the phone booted right into Android, or you were able to get to hboot or fastboot?
Thanks.
PaulieORF said:
I tried doing this quickly for about 5 minutes this morning but didn't get it to go anyway. I can try some more after work today.
When you say it booted after this battery pull thing, do you mean the phone booted right into Android, or you were able to get to hboot or fastboot?
Thanks.
Click to expand...
Click to collapse
I wasn't able to get hboot or fastboot. I pluged off and on the battery in the exact moment when the Logo came out after restarting. The logo was on the screen for the whole time, even while battery plugged off. I guess, i've done it so quickly that phone didn't switched off.
I think i was holding the power+home or power+back buttons all the time.
Can't really rember the exact way, sorry.
PaulieORF said:
I tried doing this quickly for about 5 minutes this morning but didn't get it to go anyway. I can try some more after work today.
When you say it booted after this battery pull thing, do you mean the phone booted right into Android, or you were able to get to hboot or fastboot?
Thanks.
Click to expand...
Click to collapse
Try removing the SD card and booting if its not restarting due to the wrong radio too soon that may help.. if you get into android restore the SD card and run the exploid process I posted a bit back for rogers magics, or the older goldcard method.
I've played around with taking the battery out and putting it right back in at all different times during the booting and can't get the phone to behave any differently. Iv'e tried it with SD card in and SD card out, USB cable in and USB cable out. I can't get anywhere.
I did notice that the phone does show up as an Android device for a second when it's booting. Tried to catch it in adb but no luck.
Starting to think this thing is shot. Any other ideas?
Just so everyone can see what's happening, I recorded a video and uploaded it. Linked below:
http://www.youtube.com/watch?v=hPoxMzm0MVU&hd=1
try to hold and KEEP holding the back + power... Not volume down!
Don't push and release like you did in the video.

Can't boot nexus one or use recovery

Hello,
I come here and make a new thread after I spent the day inside various forums to solve my problem but wasn't able to.
Here is the thing I tried to install the cyanogenmod earlier today. I unlocked my N1 properly and think I rooted it properly as well. But I was unable to install the custom rom. Actually my N1 won't even boot, it's stuck on the cross image with the unlocked lock and I can't boot the recovery either. I tried to install a custom recovery, the amon ra thing, but it still freezes on the cross screen.
I assume my N1 isn't completely bricked since I can still power it up, start the fastboot mode and my computer recognize de USB connection (however ADB won't find the phone even after I re-installed the drivers).
So here I come for help to either bring back my N1 to its former stock rom or any functionning rom.
Thanks.
Try the unroot/restore guide with PASSIMG of FRG33. Look at my signature.
oh thank you !!! It worked perfectly !
EDIT : Well spoke too soon I rebooted the N1 after its apparent recover and it froze again, so I started the operation once more and while updating the files ravio_v2 was checked "fail-pu" instead of "ok"
EDIT 2 : Well I rebooted after the update and the N1 never powered up again ... I guess now it is really bricked... though I can't figure why
olicyr said:
EDIT 2 : Well I rebooted after the update and the N1 never powered up again ... I guess now it is really bricked... though I can't figure why
Click to expand...
Click to collapse
You can't even get into fastboot any more?
Also, you say you followed the right steps to unlock the device and the right steps to root the device... What steps did you take exactly?
Hi,
to unlock the phone I used the oem command in the fastboot mode. Then I tried to install the amon ra custom recovery and I think that is what brought all this trouble.
Can you still see your device through fastboot? If so you should be able to flash a recovery image and a ROM of your choosing.
It should boot up fastboot like Dirk said. You can not brick the phone by flashing a recovery.
Sent from my Nexus One using XDA App
I guess there is some HW fault - might be a recent bad sector in one of the system critical areas. It's not something you can cause with SW - unless you're flashing hboot or radio, which should have been covered in the first restore attempt, which worked.
Anyway, if it doesn't power up at all - and doesn't react to charging - try pulling out the battery for several hours, and then put it back and try again. If it doesn't work - then you're up for a warranty repair...
DirkGently1 said:
Can you still see your device through fastboot? If so you should be able to flash a recovery image and a ROM of your choosing.
Click to expand...
Click to collapse
No the phone doesn't boot anything. I'll try to remove the battery and wait a few hours like said above, if it doesn't work I'm still under warranty I think

[Q] HTC Wildfire bricked? need help /will give reward

hello i just wanted to see if i still could get help with my useless device
Ok so yesterday ive rooted the phone and today i tried to install cyanogen mod 7 rom
i used rom utility which i ve downlaoded from android marketplace
now sometimes my phone boots and gets to the logo loop
ive heard that clearing cache and settings would work but i cant access these menus as my hboot is not reacting to my key presses , i tried to reflash the phone but nothing came with success.
I used android sdk and RUU but nothing with success .
maybe anyone would teamview me or give me step by step tutorial how to get this phone alive again would be appreciated
You will be rewarded
You rooted the Phone with a App from the Market?
You need if your HBoot is lower then 1.* the unrEVOked Tool.
If its 1.* there is no way to flash it.
Okay, maybe it worked with yout root app from the market, dunno, but i dont think so.
So you cant access while pressing volume down (keep holding) and switching on the phone the bootmanager? oO thats no good.
The Logo will stay up to "15minutes (<-?)" after flashing a new Rom. In this time its possible, that you Phone restarts automaticly. its normal. Switch it on an wait up to an half hour. If it keep staying in the boot sequence while showing the logo you got a problem .
I think there isnt a more unsave way than a "Flash by teamviewer". You have also pay attention to the phone while flashing. on TV you cant keep an eye on it.
But how can you reflash your phone without getting access to the bootmanager/ HBoot? I think you habe to access the clockwork to flash cm7 *thinking*.
If u nowhow to use adb try n get a adb logcat if possible
Sent from my HTC Wildfire using XDA App
Hi borris and daddyspud thanks for your reply ,i cant move around in hboot ,my hboot version i 0.80.0003
Ive rooted it using unrevoked with clockwork mod on it.
now even when i get it to boot it just loops in cyanogen animation,should i leave it for 15 minutes to do its thing?
also im new to this so i dont know anything about sdk and adb,all i did is saw the tutorials using it ,so i thought i would use it just to give it a go
HBoot 0.8 is rootable, so its okay.
If there is still an animation while you see the CM Logo everything is fine.
If it freeze for some minutes is there a problem. The Animation shows you "i am working / installing".
Yes, let him do his thing for some Minutes.
I think everting should be okay and after some minutes it will work like normal.
It reboots sometimes it self, but this is also okay.
I dont know... does the new CM7 also install a new HBoot? So its possible why you cant move around in it.
Do you wait about 10 seconds before you try to move around in it? Because in the first seconds it looks like it freezed an then it start a test or something. this takes about 10seconds then you can use it.
Its not bricked if its turning on.
Can you get into recovery? If you can try flashing the 4.1 kernel.
If that doesnt help, go into recovery and do a full wipe. Clear cache and dalvik, and under partitions menu format everything except SD card. Then flash CM7, then the 4.1 kernel
Remember first boot will take 10-15 minutes. Be patient. If youve done everything right you shouldnt have any problems
Hi and thanks for cooperation ,i left my phone on cyanogen animation for an hour and nothing is happening just animation loop constantly.
I've just tried hboot and it searches for the PC 49 DIAG and says not found after that it freezes and i cant use any menu navigation buttons . in hbot and fastboot.
I dont even know what to do next
Much help appreciated guys
oO
thats weird.
the PC49DIAG is a part of the rom it self. So i think you have to try to re-flash it. Did you try it with or without a goldcard?
before you flash your phone whipe ALL datas on it!!!
If i start in bootloader mode i get also all the "missing" errors but i can still use the vol up/down buttons to navigate around.
That should help.
I think you did something wrong while flashing.
the root failed?
you got an error while flashing?
goldcard?
Try to flash a RUU from shipped roms. DONT flash a Froyo rom, you will get the HBoot 1.* if you do this.
Recoverymode doesnt work in the hboot?
If you try recoverymode you will get a blackscreen with an triangle.
most say "press the power button" to enter the recovery mode. if this doesnt work press the "volum up button (hold it) then the power button" this should enter recovery mode.
**EDIT**
http://shipped-roms.com/index.php?category=android&model=Buzz use a www-rom its without a branding. and use a RUU rom.. and pls dont use a froyo rom. after flashing this your root is gone i think but your phone will be alive again.
dont try the cm7 this time. use a stock rom.
is it alive again?
i talked today to someone who hat exactly the same problem like you.
it was simple to fix the problem... he (you also?) didnt
whipe the phone before he flashed the cm7. thats why it wont stop looping
in the cm7 animation.
after whiping and reflashing everything was fine.
... did you whipe it b4 flashing?

??Strange Android Issues??

So I have a Mytouch 4G and its stuck in Fastboot... Okay no problem. Flashed RUU Exe still wont turn on. Flashed RUU zip still won turn on. Unlocked Bootloader and flashed recovery and ROM still no go. Everytime I turnit on it goes straight to Fastboot. Only way to turn on is in fastboot wait 30 seconds and navigate to Hboot. In Hboot go to CWM in CWM reboot system now and everything works. I just have to do those 3 steps to turn it on. Has anyone else had this problem? And is there a fix?
addictedhacks said:
So I have a Mytouch 4G and its stuck in Fastboot... Okay no problem. Flashed RUU Exe still wont turn on. Flashed RUU zip still won turn on. Unlocked Bootloader and flashed recovery and ROM still no go. Everytime I turnit on it goes straight to Fastboot. Only way to turn on is in fastboot wait 30 seconds and navigate to Hboot. In Hboot go to CWM in CWM reboot system now and everything works. I just have to do those 3 steps to turn it on. Has anyone else had this problem? And is there a fix?
Click to expand...
Click to collapse
it sounds like it is a recovery issue or a sticking volume button on the side..(just a guess) try pushing it up and down (wiggling it) if still an issue.Try flashing a different recovery such as 4EXT instead of CWM and see if that make a difference you can find it here http://www.4ext.net/ it is just something to try in case your recovery image is corrupted be careful ! let me know if it fixes your problem
[email protected] said:
it sounds like it is a recovery issue .Try flashing a different recovery such as 4EXT instead of CWM and see if that make a difference you can find it here http://www.4ext.net/ it is just something to try in case your recovery image is corrupted be careful ! let me know if it fixes your problem
Click to expand...
Click to collapse
It was actually stock and never rooted when I had this issue. The recovery was stock and still had the issue. It was when I installed CWM and a ROM that I was able to get it on, but I have to do those 3 steps.
Clean your USB port, check if any of the keys (trackpad?) is stuck. If you boot to fastboot and not to HBOOT - it means the VolDown key isn't the culprit, but maybe there is a key combination that is causing boot directly to fastboot, or maybe there' something in USB (dirt caused some high impedance connection between some lines) that causes your phone to boot to fastboot.
addictedhacks said:
It was actually stock and never rooted when I had this issue. The recovery was stock and still had the issue. It was when I installed CWM and a ROM that I was able to get it on, but I have to do those 3 steps.
Click to expand...
Click to collapse
did you check the volume button does it seem flakey when you use it ?I was editing my reply when you responded sorry?I was in the process of revising my answer up ⇑ ⇑
[email protected] said:
did you check the volume button does it seem flakey when you use it ?I was editing my reply when you responded sorry?I was in the process of revising my answer up ⇑ ⇑
Click to expand...
Click to collapse
I thought that the Vol Down button might have been stuck as well but its not. All the buttons are fine and the usb port is clean.
addictedhacks said:
I thought that the Vol Down button might have been stuck as well but its not. All the buttons are fine and the usb port is clean.
Click to expand...
Click to collapse
thats definitely a tough one sorry i couldnt help!!be patient hopefully someone will come along an offer some better advice!!!

Categories

Resources