Does anyone know if it is possible to use the touchscreen to emulate the lightgun on FPSE?
I have been trying to set it up, but so far no luck.
The game i am trying it on is die hard trilogy, the airport section.
Point Blank would be awesome if it supports light gun by way of touch screen and so would time crisis !
dsswoosh said:
Does anyone know if it is possible to use the touchscreen to emulate the lightgun on FPSE?
I have been trying to set it up, but so far no luck.
The game i am trying it on is die hard trilogy, the airport section.
Point Blank would be awesome if it supports light gun by way of touch screen and so would time crisis !
Click to expand...
Click to collapse
Yes guncon works mate
Just assign the A & B button to hardware keys they are L3 & R3 and you can start pew pewing
Related
I have recently installed the morphgear emulator with the SNES module. After a bit of messing around with the settings, I managed to get it working quite well. The only problem I have with it now is with the controls. Having mapped the keys, all function correctly until I press more than one key at a time. When I do, the key I was pressing first stops responding. This means that if, for example, I am playing a game where I am running left then have to jump or shoot, the charactor will stop running until I release then re-press the left key. This makes the controls very awkward. It also makes diagonal movements impossible.
I dont know if this is beacsue the XDA Exec only acknowledges a single key press at a time or if it is a problem with how the emulator has been written.
Does anyone have any ideas how to get round this? (I hope I explained myself clearly enough)
Has nobody else experienced this problem? Having tried some other games it seems that it is the device, not the software!
Half-topic
@ paul H
I dont know about your button-problem try 2 play rpg's instead ;P
anyway my question is which settings are u using ? because i tried it and it workes ok but a bit slow. already increased frameskip to 8 and used lower quality of sound but its still slow. I guess i can decrease window size or toggle the sound of but i want a emulator that can display full-screen with sound atleast.
gimme your perfect settings maybe i can run it faster
PaulH said:
Has nobody else experienced this problem? Having tried some other games it seems that it is the device, not the software!
Click to expand...
Click to collapse
I've just experienced the same thing with my O2 Exec, playing the game Seal Ball. It seems that you cannot use 2 keys at once, you cannot even use the directional pad for diagnal movement, it's left, right, up or down and nothing else. Pushing it in a diagnal direction stops movement entirely. This really limits the types of games you can play on this device. Anyone know of a fix?
i was gonna say buy a snes bt thats mean. its a shame cos a good emulator canalways help pass the time at the office
gapi and omapclock are meant to speed it up - not sure about controls because ive just got it but i get an error when i pull the keyboard out!
And I cant get any sound on the snes so far... Any ideas?
I noticed the same thing. Very stupid because playing games is one of the tings I bought my MDA Pro for!! :x :x :x :x :x
Here's the topic I started:
http://forum.xda-developers.com/viewtopic.php?p=215253
I hope there will be a fix or something, and that this is not a hardware shortcoming.
Might be jumping the gun a bit but does anyone else agree that HTC should have thought of some form of tool that controls screen orientation based on Vue Flo, most tablet PC's have this functionality so it would have been nice.
If this exists can someone point me in the right direction.
I thought it did sometimes, but it could just be my handset being random/changing orientation due to me knocking the keyboard when rotating it.
I want to see a game use the i2C sensor that provides the tilt sensing
This happened with the Mac remember? Turns out it was a standard part that had 3 axis!
I hope somebody can look into this for the Ameo(Athena) because the right driver could make it into a digital/Analogue controller for games on the device.
How about old school Marble madness in Mame with tilt control? hehe.
As long as there is an on/off for it. I could see myself changing orientation all the time by accident, and after a while, I bet it would become very frustrating. Well, for me, anyway.
mysticbluebmw said:
As long as there is an on/off for it. I could see myself changing orientation all the time by accident, and after a while, I bet it would become very frustrating. Well, for me, anyway.
Click to expand...
Click to collapse
you can turn Vue FLo on/off when you are browsing already
I would love it if there was a hack that redirects the scroll ability to the regular scroll bars such that any application on the device with more than a screen-full data to show could use Vue Flo.
One of the main reasons a friend of mine & I puchased the HTC PPC6800 from Alltel was that we intended on loading up Roms & Emulators from the original NES. However, while you can put an emulator onto the phone & run it, the QWERTY keyboard only allows you to push one keystroke at a time!! Anyone familiar with gaming, reguardless of the platform, can understand just how unplayable almost every game is without the ability to run & jump! You can run.. You can jump. You just can't do both simultaniously.
If there are any known fixes for this, please help.. I'm desperate. I'm guessing it's a software issue as there are already keys on the keyboard that support multi-button pushing such as the shift and function keys. I imagine there must be a work-around of some kind out there. Any help would be greatly appreciated.
Thanks for reading!
Turn the 6800 on it's side(closed) like a psp and use the d-pad for direction and the e-mail and internet buttons for A and B. From what I understand those buttons don't suffer from the one keystroke limitation.
The only issue with that is the emulator, and subsequently every emulator I've tried after for NES doesn't support the sideways resolution for whatever reason. The loading screen for booting a rom with turn just like any other window would but the second the actual game loads it flips back up vertical. SNES emulators seem to handle the horizontal resolution just fine but the controller on the SNES had 6 buttons so mapping just 2 really doesn't cut it.
I currently try to play on the tiny little controls at the bottom and none of them seem to be effected by the two buttons at a time issue but the Ok button can't be mapped so playing around it is unbearable to the point of just not wanting to play. Not to mention it kills the WOW factor of showing someone when you have to play the game with a controller that's the size of a quarter.
Good call. I forgot to mention the landscape resolution thing. I ran into this thread shortly after reading yours. If you haven't seen it check this one out. I believe one or more of those emulators address the landscape abilities (MorphGear and SmartGear). Hope that helps.
The program is really slick for emulation, I'll give you that. lol. It's pay for use so I'm just messing with it in the 5 min demo mode but so far it looks like it'd definitely be worth buying.. I'm still however running into the multi-key issue on the QWERTY. NES is fine without using the QWERTY as it only requires an A & B button but the SNES had 6 buttons that need to be mapped and getting them all in an accessable spot on the face of the unit just isn't happening.
Has anyone heard anything about a possible fix for this?
As you FPSECE fans know, the LG expo Alpha keys are currently not mappable for input.
Anyone working on some sort of fix that will let FPSECE use the hardware keyboard, or am i stuck using my old Kaiser as a blue tooth remote control?
my thoughts exactly. anybody know how to map alpha keys?
I have the same problem, and also when I play gran turismo and hold the key for riding and while I press the arrow, the key for riding is disconnected
sorry for my english
Sorry guys, there is no keyboard fix. The keyboard will not support multiple key presses, only a few keys are mappable, and the screen is not multi-touch... so no on screen controls either. Go snag Cobalt Controller and use a ps3 sixaxis controller. You'll have to re-assign the controller's blutooth mac and then it works flawlessly with FPSECE.
Just an idea
I have an AT&T fuze, and we had a similar problem on our phone due to it not been able to register the keys individualy, but as a hole, what could be the case with your phones. Some developers made some programs to fix this issue, but what really did it for me was the duttythroy Disable xt9 cab, very simple an easy, and you can find it here with search.
If you could try this please let me know your results on this thread, since I was thinking of purchasing this phone.
Thanks for your reply
I use a PS3 sixaxis controller also. I have 2 Dualshock PS3 controllers and 2 regular sixaxis controllers so I just dedicated one of those to the phone. Seriously the most amazing way to play. 58-60FPS Gran Turismo 2 with a controller is phenomenal.
I have read about several people using a PS3 controller to play PS1 games on the expo as well as some people also using the pico projector as well to run the games. So just in case people didn't know the pico projector does work very well in combination with the PS3 controller.
However, that's not for me. I don't want to purchase or lug around either one of those to play games. Part of the reason I initially got the expo over something like the tilt 2 was because of the faster processor, but it's almost pointless if the keys don't work. In all honesty though I really like the phone and wouldn't trade it for another phone after using it, PS1 games or not. But still, if anyone figures out a way or writes a program to get the keys to work please keep us posted.
Using the multi-key function you can overcome a few things. Playing a racing game, use multi-keys to combine the gas button with both the right and left button. This will allow you to turn while still applying gas. Also the multi-keys work to map a single button, this seems to have a better response compared to the normal d-pad buttons.
PDAnewbie said:
Using the multi-key function you can overcome a few things. Playing a racing game, use multi-keys to combine the gas button with both the right and left button. This will allow you to turn while still applying gas. Also the multi-keys work to map a single button, this seems to have a better response compared to the normal d-pad buttons.
Click to expand...
Click to collapse
Thanks for the help. I'll see if this makes it any easier. It would be nice though if eventually someone made a fix for this.
carlosdayas said:
I have an AT&T fuze, and we had a similar problem on our phone due to it not been able to register the keys individualy, but as a hole, what could be the case with your phones. Some developers made some programs to fix this issue, but what really did it for me was the duttythroy Disable xt9 cab, very simple an easy, and you can find it here with search.
If you could try this please let me know your results on this thread, since I was thinking of purchasing this phone.
Thanks for your reply
Click to expand...
Click to collapse
I had the same Fuze phone and I had the same issue with the keyboard, also the fix was to disable xt9, now Im going to buy this eXpo phone, I hope the xt9 fix works too.
Is it possible to set up the touch analog control to work with fpse?
If so, could someone explain how please (or link me to a site explaining how, i can't find one anywhere)
Games like Ape Escape need the analog sticks to play.
Also, could someone explain how to set up the light gun to work with games like time crisis and point blank. I can not get the touchscreen working with the light gun at all.
Thanks in advance.
I haven't had the analogue sticks working yet and as far as I remember for ape escape you need L3 & R3 aswell and the analogue touchpads are not pressable.
As for the guncon go to guncon mode and apply hardware keys L3 & R3 to your shoulder triggers and start shooting away don't worry because all settings are saved for each game individually
Ok I got the lightgun working thanks.
The only way atm to get analog stick emulation is to srlect analog, use on screen dpad and use the actual xperia dpad as the joystick.
No way to use the actual touch analog pads atm.
Thanks for helping.