SOLUTION .... Kies not connecting - Galaxy S I9000 General

This has worked for me several times.
Problem - Kies stays in connecting mode forever.
Reason - Think I once had Odin and Kies open at same - seems to mess up drivers and connection.
Solution:
1. Make sure Odin is closed.
2. Put phone into download mode.
3. Start Kies with phone connected to PC in download.
4. Leave it to install drivers. This may take a few minutes, be patient)
5. Disconnect phone from PC and reboot
6. Ensure USB debugging mode is off
7. Ensure nothing is running on phone and you are on home screen
8. Connect phone to PC and run Kies
9. It should connect.
This has worked for me several times.....I hope it works for anyone having this problem. If it doesn't please don't flame me. If it does, please hit the "thanks" button.
Best of luck!

What worked for me was using the default TwLauncher instead of LauncherPro. Don't ask me how this fixed my problem, but it did!

Also make sure Bluetooth is off and no apps are running in the background (use the built in Task Manager for this)

lolturnip said:
What worked for me was using the default TwLauncher instead of LauncherPro. Don't ask me how this fixed my problem, but it did!
Click to expand...
Click to collapse
The problems most people appear to be having connecting to KIES are with standard phone setup after dabbling with Odin. I first encountered the connection problem after forgetting to close Odin and opening Kies, even after reinstalling drivers. Hence me connecting my phone in a few different modes to see if drivers got sorted...and it appears they did !
I really hope my solution helps others out too

Hiya. Been reading and trying these solutions.
My wife's SGS2 will not connect to Kies no way no how. Tried all of the available solutions. It will not connect to NPS either, although NPS sees the internal and external storage and media but not the phone to be able to upgade to Android 4 which is supposed to be out this week on Orange.
Any help appreciated.
I am using windows 7 Ultimate and the phone is stock orange

Related

Can't Connect via USB

So I had my phone rooted, and removed some of the ATT apps using instructions from here: http://androidforums.com/samsung-captivate/124736-t-bloatware-getting-your-way-delete-some.html
After doing all this, the phone still worked fine, but as of today I can't seem to connect via USB. ADB doesn't see the phone, and even if I disable USB debugging and attempt to just connect as mass storage, the drives don't show up in my computer like they used to.
I attempted a windows rollback to just before I installed the drivers, then reconnected the phone, but I did not get any message about unknown devices, and the phone doesn't seem to be in my device manager.
Can anyone help me out here?
Edit: Running Windows 7 x64
you erased something you werent supposed to. dl the dump posted here & move it to an Micro SD. Put it in your phone and use a program to move it from external to internal memory then load back all the apps you deleted.
If I had deleted something, shouldn't USB connectivity have died right after I did that, and not after a night of doing nothing with the phone?
Either way, How exactly would I go about restoring from that stock dump that was posted?
Mine is doing the same thing. Had a hard time with the windows 7 drivers to begin with though.
I am going back to XP when I get home. Will see if it will recognize it then.
Sent from my SAMSUNG-SGH-I897 using XDA App
Hm, an update on my situation: 3g watchdog died on me a couple times (gave me the popup, asked me to force close), so I decided to reboot the phone, and now everything works like it used to. I had also restarted my PC since the last time I tried (and failed) to connect over USB.
So if anyone else is having similar problems, I guess try rebooting both the phone and your computer.
I'm going to be keeping a copy of that "Rooted Stock System Restore" update.zip on my phone from now on, just in case.
The first Captivate I got from AT&T did the exact same thing right out of the box. I actually had to return it for another unit. Hopefully that was just a freak thing though.
I had a similar issue with windows 7 when I was first trying to connect via usb. Not sure if this will work for you, but I had to plug it into my rear port, the front ones didn't work just for the captivate.
Sent from my SAMSUNG-SGH-I897 using XDA App
it seems im having the same probs too i removed the att stock apps that were in one of the posts, im downloading samsung kies atm to see if that will help...
Edit, it did...windows and ADB redetected it.
I also rooted my Captivate and removed all of the AT&T crap. USB connection is still working fine under Windows 7 x64. Didn't install Kies or drivers either.
Halleleujah!
I had the same problem. Got this file from Samsung, and it worked on my Win7Ultimate 64 bit machine.
Try making sure you are back to touch wiz and see if it works... Worked for me.
I had some issues trying to get my phone to connect also ...
Windows Vista64 Ult.
Initially the MTP driver would hang when the phone was connected, and then eventually it would indicate that the installation was successful, then it would re-install itself after about 5 minutes. This was an endless loop which was severely draining of my system resources causing other applications to hang as well. I removed the drivers and ...
I downloaded the USB drivers from Samsung and installed them, when I connected the phone the computer did not recognize it, nor did the display on the phone indicate that it was plugged in. I tried several different USB ports.
I then changed the mode to mass storage and the phone was recognized, but both the internal and my secondary memory cards displayed 0 bytes free of 0 bytes available.
I downloaded the UK version of Kies, this was an utter waste of time. The Kies utility was not able to connect to the phone at all. I mass storage mode Kies displays an alert that it is not compatible, and the same goes for media player mode. If left in Kies mode the phone displays "connected", but the Kies utility just displays "connecting" and never progresses. Uninstalled Kies, and re-installed the Samsung driver ...
Connected the phone in Media Player mode, which is allowing me to access both memory locations without difficulty. Though windows pisses me off every time I connect the phone because it wants to sync windows media center with the phone ... though this is easily ignored.
Has anyone gotten the Kies utility to work with the captivate?
Battlehymn said:
I downloaded the UK version of Kies, this was an utter waste of time. [...]
Has anyone gotten the Kies utility to work with the captivate?
Click to expand...
Click to collapse
Try the Canada version, that's been working great for me, in Kies mode and all.
I had the similar kind of issue, look for the thread with ODIN and windows drivers, that is what worked for me...

For those who can't connect with Kies

After half an hour trying I have just found a working solution how to connect your SGS in Kies. Here is the deal:
Start Kies, put phone's USB settings in Kies mode. Connect your phone to the PC. Wait until MTP App show "Connected". Go to your PC's Device manager, find Portable Devices and select Disable on GT-I9000. Do not wait for the disabling process to be completed, just disconnect the USB cable. Now connect the USB cable again, wait the MTP App on the phone to show you the message "Connected" and choose Enable on GT-I9000 in Device Manager. After a few seconds your phone should be ready in Kies
I tried this both on x86 and x64 Windows 7 and it works for me.
I hope this will help! And I hope there isn't another thread with this solution. If there is - I'm sorry
i cant wait to get home and try this... another 10h to go
but if this helps ur a geniues
celeronix said:
After half an hour trying I have just found a working solution how to connect your SGS in Kies. Here is the deal:
Start Kies, put phone's USB settings in Kies mode , go to your PC's Device manager, find Portable Devices and select Disable on GT-I9000. Do not wait for the disabling process to be completed, just disconnect the USB cable. Now connect the USB cable again and choose Enable on GT-I9000 in Device Manager. After a few seconds your phone should be ready in Kies
I hope this will help! And I hope there isn't another thread with this solution. If there is - I'm sorry
Click to expand...
Click to collapse
Will put this in the FAQ if we have some confirmations for its effectiveness
when i first bought my phone it worked with kies, but after flashing it to a different firmware there was nothing i could do to get it to connect. i had deleted drivers, re-installed, etc etc but nothing worked. what ended up working was putting the phone in download mode, plugging in the usb to both phone and pc, then putting the phone into recovery mode, and as soon as the recovery menu popped up my device was recognized and the correct drivers were reinstalled and all was fine again
hondaguy said:
when i first bought my phone it worked with kies, but after flashing it to a different firmware there was nothing i could do to get it to connect. i had deleted drivers, re-installed, etc etc but nothing worked. what ended up working was putting the phone in download mode, plugging in the usb to both phone and pc, then putting the phone into recovery mode, and as soon as the recovery menu popped up my device was recognized and the correct drivers were reinstalled and all was fine again
Click to expand...
Click to collapse
If you still have this problem, please try my method and tell me if it works
I had issues and I also tried this method. But it didn't help
Last thing I tried was to format the internal SD. That did the trick for me....
The biggest problem with getting the phone to connect to Kies is two fold:
1) MTP application will ONLY launch from the home screen (touchwiz screen). NOT from any app. drawer / launcher screen
2) If USB mode on the phone is set to Ask on Connection, MTP won't launch due to the USB app. being open (see 1) above)
If you set USB to Kies mode and then ensure you are on the home screen of the phone with nothing else running, Kies WILL connect
Also remember the 16+ size extension bug.
So a full wipe on ur I internal sd card is a good solution just make sure u back it up tour hdd
I also did a "Driver recovery" from Kies and it worked after that. Although MTP driver failed to install for me in this case.
Make sure to update to the latest version of Kies ( Now 1.5.1.0074.45 ) as this version seems far more reliable when connecting the phone
I recently discovered that the culprit of Kies continuously trying to connect to phone was caused by wrong MTP driver selected.
Under WinXP
After phone connected in Kies Mode..Go to Device Manager/Portable device..
If you see a device labeled as "MTP xxx or Portable device.." ,wrong MTP driver or older driver has been used..For my case, a Microsoft 2004 MTP driver was selected.
To fix it.
1) Do a manual driver update..for my case ,i let the driver wizard to search automatically..this round, another newer Microsoft driver was found..in fact 2 of them.. after installing the drivers(Microsoft 2006 MTP driver,2 are listed..). .Now Device Manager/Portable device listed "GT-i9000" ,Kies immediately found my phone.
Driver name that worked are "wpdusb.sys" and "wudfrd.sys" found under \windows\System32\drivers\..
celeronix said:
If you still have this problem, please try my method and tell me if it works
Click to expand...
Click to collapse
You must not understand English. The entire reason I posted a comment was to share how I overcame this issue, so that would mean I no longer have this issue
Probable Fix for Kies
Friends,
I have also faced the same problem (while connecting my SGS via Kies MTP was crashing). It used to work earlier so I started to remove Applications and data in the reverse order of Installation. After I removed "Dolphin Browser HD" and all saved bookmarks it started working.
This may be a probable solution if you also have Installed Dolphin Browser.
~Gaurav
India.
2 different issues.
MTP crashing on phone is independent from Kies on PC cant detect phone.
i couldnt use kies either but i wasnt worried as i hardly have free time now..
this was a simple fix and now it workes perfectly for me.
sorry about the late replay.
thanks
I'm glad that it works for you
try this
try #9 on
http://forum.xda-developers.com/showthread.php?p=8046872#post8046872
You might be interested in my little APK (SGS Toolbox). I first created it to have it read the product code from the nv_data file to allow you to check whether it has been modified after a firmware update. But now I added some extra options, of which one is the option to check whether there are new firmware updates available in KIES by issuing the same request KIES does when checking for new firmware. This way you don't have to connect your phone to your computer all the time to check for new updates in KIES. Note: It sends JM1 as the current firmware version to find the latest. I might send the actual phone's firmware version once I figured out how to find it. See: http://forum.xda-developers.com/showthread.php?t=778244
Thanks, I'll give it a try
Deleted. Wrong thread.

[Q] Kies doesn't work after Root!

Hi everyone!
I've got an Apollo (GT-i5801), and after a successful root using z4root, i can't use my phone with Kies. It worked great before root.
When i connect it to the pc, the phone is recognized as an SD card( fine!) but with Kies, the "Connecting" option stays there forever...
Any help?
Thx
Try it without sd card. you can't access your files with kies now but you can upgrade when it's time.
Humpie said:
Try it without sd card. you can't access your files with kies now but you can upgrade when it's time.
Click to expand...
Click to collapse
It's the same... no connection.
Should i unroot it, to update with Froyo, using Kies?
I think you should try
Froyo?
?
i had same problem with kies few days ago after installing froyo on my galaxy 3... problem solved with "reinstall driver" option in kies...
martin.jeremic said:
i had same problem with kies few days ago after installing froyo on my galaxy 3... problem solved with "reinstall driver" option in kies...
Click to expand...
Click to collapse
Didn't work for me.
mine doesnt work too after flashing 2.2 froyo... tried to reinstall driver doesnt work too
not that i care for kies anyway
AnyDroid said:
Didn't work for me.
Click to expand...
Click to collapse
infestedd said:
mine doesnt work too after flashing 2.2 froyo... tried to reinstall driver doesnt work too
not that i care for kies anyway
Click to expand...
Click to collapse
disconect phone from usb, select "driver recovery" option in kies and wait for it to finish... then connect phone to usb... that's how it worked for me... when i tried to reinstall drivers with connected phone, it just do nothing....
martin.jeremic said:
disconect phone from usb, select "driver recovery" option in kies and wait for it to finish... then connect phone to usb... that's how it worked for me... when i tried to reinstall drivers with connected phone, it just do nothing....
Click to expand...
Click to collapse
I've tried that way, didn't worked
i dont know if was martin tip, or an update on kies
what worked for me :
try to disconect the phone, reinstall drivers (do that after kies update, if you need to)
dont set the phone to ask on connection what to use (mass storage, kies, internet) but set it to connect directly on kies
start kies, and plug the phone
worked for me
Did you verified that USB Debugging was unchecked ? because when it's checked there is no connection possible using USB port neitherfor OS or KIES?
I am also facing the same problem with my I5801. Initially I rooted with z4root 1.1. version later I felt its because of the old version. Later I installed latest Z4root 1.3 version and re-rooted it but no use. My phone is not at all getting recognised (though I get a sound from my phone after connecting to pc but there is no option to choose KIES or Mass storage etc. It simply getting charged)
The KIES didn't recognise my phone even after connecting it to PC.
Later I tried
http://www.careace.net/2010/08/25/how-to-fix-samsung-kies-connection-problem/comment-page-5/
Though not of much use nothing happened.
Even I tried (Dial part in the below link)
http://forum.xda-developers.com/showpost.php?p=8667486&postcount=524
Fortunately this time my KIES recognises some unknown phone is connected but it mounts my phone in Memory card mode. Though I couldn't do much in this mode, this might help some of you to understand the problem deep enough to solve the issue. Thanks.
P.S. Though connecting to KIES is not of much use as we can back up data with some other apps but the major concern here is if in case (no hopes though) Samsung releases official firmware then we should have to use KIES to upgrade our OS version, then we will be in trouble.
After rooting with FuguRoot, Kies can't find my phone either. This seems to be a known issue but nikademus hasn't replied in his thread for some time now. Does anyone know why this happen and how to fix it? It seems a bit strange seeing how everything but the added su and busybox is stock..
Maybe some cache issue?
I can verify on that. After rooting my phone to make a backup with Titanium backup before upgrading with Kies, just to be on the safe side Kies doesnt work anymore with my galaxy3.
I tried unrooting the phone, but it did not help.
Strange thing is, that the usual information on the phone screen, saying that it is now connecting to the Kies did not show up. I did som trick like writing *#723572# (not pretty sure anymore what it realy was) and then setting it to modem and back to pda mode. Now I see the information saying on the mobile screen that it is trying to connect to samsung kies, but it still does not work.
I tried it on a virgin computer running xp sp3. I installed the newest Kies, than connected the phone, but now it says, that the connected phone is not in Kies (or Pc connect) mode, and I should change it to that. However the galaxy 3 screen says that it is definitely in Kies usb mode.
I will try later a factory reset and then an update through Kies to the latest fw. And after that a restore with Titanium backup.
sikolymester said:
I can verify on that. After rooting my phone to make a backup with Titanium backup before upgrading with Kies, just to be on the safe side Kies doesnt work anymore with my galaxy3.
I tried unrooting the phone, but it did not help.
Strange thing is, that the usual information on the phone screen, saying that it is now connecting to the Kies did not show up. I did som trick like writing *#723572# (not pretty sure anymore what it realy was) and then setting it to modem and back to pda mode. Now I see the information saying on the mobile screen that it is trying to connect to samsung kies, but it still does not work.
I tried it on a virgin computer running xp sp3. I installed the newest Kies, than connected the phone, but now it says, that the connected phone is not in Kies (or Pc connect) mode, and I should change it to that. However the galaxy 3 screen says that it is definitely in Kies usb mode.
I will try later a factory reset and then an update through Kies to the latest fw. And after that a restore with Titanium backup.
Click to expand...
Click to collapse
Try unmounting your MicroSD card (Settings -> SD Card and Phone Storage -> Unmount SD Card) and then connect it to PC.
If you're on windows 7==> Kies, preference==> check: compatible with windows xp (service pack 3)

[Q] Desperate Need of Help

Alright, Ive been browsing these forums ever since I got a Captivate and now I am trying to help a friend that has an Epic. They currently have dk28. Their Epic has always been Flakey on being detected on computers. We have tried three, it only gets detected on Mass storage on one of those and doesnt get detected in dowload mode on any of them. That being said, We cannot get back to stock via Odin, or use the Samsung official Update due to that it will not be detected in download mode. Can anyone tell me is there anything I can do at this point? Ive already tried 3 cables, uninstalling and re-installing drivers, etc... I am hoping maybe there is some way to get back to stock without odin, then from there getting to EB13 without the use of a computer. Thanks in advance and I look forward to posing here.....
Did you restart the computer at all?
usb debugging enabled?
i have trouble connecting sometimes and it's always solved by restarting the phone.
Basementboyz24 said:
Alright, Ive been browsing these forums ever since I got a Captivate and now I am trying to help a friend that has an Epic. They currently have dk28. Their Epic has always been Flakey on being detected on computers. We have tried three, it only gets detected on Mass storage on one of those and doesnt get detected in dowload mode on any of them. That being said, We cannot get back to stock via Odin, or use the Samsung official Update due to that it will not be detected in download mode. Can anyone tell me is there anything I can do at this point? Ive already tried 3 cables, uninstalling and re-installing drivers, etc... I am hoping maybe there is some way to get back to stock without odin, then from there getting to EB13 without the use of a computer. Thanks in advance and I look forward to posing here.....
Click to expand...
Click to collapse
Are you placing the phone in Download mode???
****Ensure USB Debugging is Enabled.
Download mode:
1. power off the phone.
2. Press 1 + Power button together
otherwise, I would highly recommend to:
1. uninstall drivers
2. restart the PC
3. install the Samsung drivers
4. restart
5. try connecting the phone (while powered on) and letting the PC recognize it.
6. Once drivers are installed, unplug the USB cable and Power off the phone
7. Place the phone in download mode and reconnect the USB cable and let the secondary drivers install.
8. unplug and reboot the phone, and restart the PC for last time.
Try Odin now, remember you need the phone in Download mode to use Odin.
Note: Yes I know I send the OP to restart many times his PC but, with windows we can never "restart" to much...
Couple things:
What OS are you using? If vista or 7, plug it in in debugging and go to the devices window in control panel, see if there is a samsung device there. If there is, right click and look at properties..check to see if there's an adb driver. If you see other drivers but not adb then its matter of getting the drivers to install somehow.
Second, there IS a full di18.zip, and a modem updater.zip to di18 as well, both flashable in CWM..(I believe its in a thread started by noobnl, its kinda old)...you might only have to do the .zip though since you'll eventually be going to the eb13 modem. I don't know for sure.
But be wary: switching android versions with CWM can be dangerous. I know it sounds counterintuitive, but it can actually be riskier than using odin. I would say use this only in last resort.
If you decide to do this, MAKE SURE you have the full download (I say download twice and compare the sizes just to make sure), have a full battery and keep it plugged in, and do your 3x wipes
Good luck
Sent from my baked and emotionless SPH-D700
megabiteg said:
Are you placing the phone in Download mode???
****Ensure USB Debugging is Enabled.
Download mode:
1. power off the phone.
2. Press 1 + Power button together
otherwise, I would highly recommend to:
1. uninstall drivers
2. restart the PC
3. install the Samsung drivers
4. restart
5. try connecting the phone (while powered on) and letting the PC recognize it.
6. Once drivers are installed, unplug the USB cable and Power off the phone
7. Place the phone in download mode and reconnect the USB cable and let the secondary drivers install.
8. unplug and reboot the phone, and restart the PC for last time.
Try Odin now, remember you need the phone in Download mode to use Odin.
Note: Yes I know I send the OP to restart many times his PC but, with windows we can never "restart" to much...
Click to expand...
Click to collapse
Did everything up till 5, and that did not work because the computer would still not recognize the phone. What now?
squshy 7 said:
Couple things:
What OS are you using? If vista or 7, plug it in in debugging and go to the devices window in control panel, see if there is a samsung device there. If there is, right click and look at properties..check to see if there's an adb driver. If you see other drivers but not adb then its matter of getting the drivers to install somehow.
Second, there IS a full di18.zip, and a modem updater.zip to di18 as well, both flashable in CWM..(I believe its in a thread started by noobnl, its kinda old)...you might only have to do the .zip though since you'll eventually be going to the eb13 modem. I don't know for sure.
But be wary: switching android versions with CWM can be dangerous. I know it sounds counterintuitive, but it can actually be riskier than using odin. I would say use this only in last resort.
If you decide to do this, MAKE SURE you have the full download (I say download twice and compare the sizes just to make sure), have a full battery and keep it plugged in, and do your 3x wipes
Good luck
Sent from my baked and emotionless SPH-D700
Click to expand...
Click to collapse
Im Using Vista and No Drivers were there.... And I guess I may be at the last resort point. Full details?
some people have tried changing usb ports and it will work.
anyone else having problems not being able to connect phone to comp. can try this method but not sure if this works on the dk28.
what you could do is to remove the microsd card from phone use the adapter that came with it and put sd card into your laptop or if you have a external hub then your microsd will just be a storage devise then download the mac version of froyo from samsung (sorry i can't post outside links yet)but it is the samsung support downloads then search for this SPH-D700ZKASPR click on the software then download the mac version to comp. then copy and paste what you downloaded to the root of the sdcard (the first one you see when you open the sdcard) then put card back in phone, power off phone wait untill all lights go off press volume down, camera and power at same time. then in recovery chose update.zip from sd by using volume buttons to chose what you want to do then press the home button to start.
I had issues with mine taking the update (and issues with it beforehand) and getting it recognized on two different computer, multiple times, it seems completely random whether or not it would work sometimes.
thepervster said:
some people have tried changing usb ports and it will work.
anyone else having problems not being able to connect phone to comp. can try this method but not sure if this works on the dk28.
what you could do is to remove the microsd card from phone use the adapter that came with it and put sd card into your laptop or if you have a external hub then your microsd will just be a storage devise then download the mac version of froyo from samsung (sorry i can't post outside links yet)but it is the samsung support downloads then search for this SPH-D700ZKASPR click on the software then download the mac version to comp. then copy and paste what you downloaded to the root of the sdcard (the first one you see when you open the sdcard) then put card back in phone, power off phone wait untill all lights go off press volume down, camera and power at same time. then in recovery chose update.zip from sd by using volume buttons to chose what you want to do then press the home button to start.
Click to expand...
Click to collapse
Any confirmation on whether or not this is safe and will work???
this is how i put different updates in zip format on my phones sometimes my comp hesitates, so to make sure they go on sd card all the way this is how i do it. its doing the same as mounting phone in storage mode.
but i went back to stock ecliar di18 2.1 a couple days ago and i had no prob.at all.
i just didn't want to wait for the ota and i found the update.zip on the samsung website yesterday at about 6 pm. downloaded it and it worked great. was rooted this morning at 7am and am good to go.
thepervster said:
this is how i put different updates in zip format on my phones sometimes my comp hesitates, so to make sure they go on sd card all the way this is how i do it. its doing the same as mounting phone in storage mode.
but i went back to stock ecliar di18 2.1 a couple days ago and i had no prob.at all.
i just didn't want to wait for the ota and i found the update.zip on the samsung website yesterday at about 6 pm. downloaded it and it worked great. was rooted this morning at 7am and am good to go.
Click to expand...
Click to collapse
I dont see how this is going to help me since I am not on stock....
sorry, what i was saying for you was to change ports. i guess what should have been asked is are you rooted or do you just have the unofficial dk28 on it from dec. and have you removed any of the bloatware?
Yes change USB ports. The ones in the front normally don't work. You need one directly on the mortherboard
thepervster said:
sorry, what i was saying for you was to change ports. i guess what should have been asked is are you rooted or do you just have the unofficial dk28 on it from dec. and have you removed any of the bloatware?
Click to expand...
Click to collapse
I tried changing ports multiple times. I got a new cord, and now it finally detects the phone in regular mode but it will not in Download mode or when I have USB debugging on. Any more ideas anyone?
Basementboyz24 said:
I tried changing ports multiple times. I got a new cord, and now it finally detects the phone in regular mode but it will not in Download mode or when I have USB debugging on. Any more ideas anyone?
Click to expand...
Click to collapse
Hate to ask, but did you follow the instructions EXACTLY as the SW Updater tool says? Pull battery (next) - Download mode (next) - plug into PC (next) - Pull battery (again) (next).
One of the steps the tool does has to do with installing drivers... you mentioned Vista, but is it 32 or 64 bit? Have you tried a different PC?
Whosdaman said:
Yes change USB ports. The ones in the front normally don't work. You need one directly on the mortherboard
Click to expand...
Click to collapse
I have the exact issue with my phone. I can only connect to my computer using the back usb ports (off the motherboard). I'm on windows 7. If you haven't, give that a shot. Even try uninstalling the drivers, connecting to the back usb ports and see what it does.
Saw someone post about Odin only working when they flipped the phone face down - thought it had something to do with the accelerometer. I suspect that in that case it might just be a bad connection and flipping the phone over made the contacts work. Worth trying though it you are desperate.

"USB not recognised", Odin download mode problem

Hey. Im brand new to this forum and to Android aswell since i came from Iphone. Yea im a noob and sorry if you notice bad english
So i received my SGS2 some days ago and after researching about root/custom roms and stuff, I decided to start with rootin my SGS2. i download Odin3 1.85 and superoneclick, i also liked litening rom v1.1 and downloaded that too.
So i turn on "USB debugging" and turn off the phone to enter "download mode" and when i try to connect to Odin, nothing shows up. And Windows bar tells me that usb is not recognised. But... flash drive/transferring files and connecting to Kies works just fine. Please help me, ive been sitting over 24 hours with this issue and ive restarted/uninstalled installed pretty much everything over and over again (kies/drivers/device) not windows though. Why wont Windows/odin recognise it in download mode???
And if possible, is there a way around to install litening rom??
Thats weird man....very very unlikely to happen...
Just tell us step by step with screen shots if possible then it becomes very easy for us to find where u r doing it wrong...ok ?
Turn off USB debugging .
reboot phone and PC .
jje
While being in download mode on the phone, the pc/odin is not recognising anything
but everything works fine and recognises when i transfer files or use Kies
/tried uploading screenshots but the forum wudnt allow it since im a noob lol)
[email protected]
Thanks for reply but ive done that several times now
Adnanish said:
While being in download mode on the phone, the pc/odin is not recognising anything
but everything works fine and recognises when i transfer files or use Kies
/tried uploading screenshots but the forum wudnt allow it since im a noob lol)
[email protected]
Thanks for reply but ive done that several times now
Click to expand...
Click to collapse
This is driver issue.Try to find on kies an option to install the drivers again(i am not in front of my pc).Of course phone on and untick usb debugging
Sent from my GT-I9100 using Tapatalk
This is a driver problem. The Gadget Driver fails to get installed properly.
Make sure Windows Update are set to automatically find drivers for your devices.
I myself faced this problem. To rectify it I'd to try the same thing on a different machine and it worked flawlessly there.
The problem you're facing is that the Service Mode drivers are not getting installed, hence Odin is unable to recognize it.
Other possible fixes include, trying on different USB Ports, downloading Samsung PC Studio.
Thx for the replies everyone. Yea i figured its a driver issue, ill try the suggested actions incl samsung pc studio installing, and if its still not working i guess my last resort is using another pc or reinstalling windows on my own pc
In kies, i think in the tools menu, there is a install drivers option. This will fix the problem im sure. Not sure about pc studio having the same.
Sent from my GT-I9100 using XDA Premium App
fyi, i reinstalled windows and updated everything and the driver connection issue is solved now. I should have done this from the beginning instead of freaking out for several midnight hours lol thx for the help everyone, hopefully the rooting and flashing process should happen painless now
if anyone has this problem too,
i had the same problem and for me closing kies helped.
mfg Solidus

Categories

Resources