i am changing over to nand android and i'm have some problems. when i try to flash a new radio or MAGLDR113. i get an error saying that the flash utility can't open the file. i then decided to start from scratch as i thought some got screwed up along the way. i flashed the original wm 6.5 rom and it worked. then i flashed hspl 2.08 and it worked. but now i seem to be the same place i started. a new radio won't flash and MAGLDR113 won't either. i get those same file read/open errors in the flash utility. anybody got any ideas on a fix? i didn't have time to really do a search on this topic, i have 2 kids running around wanting this and that, fighting and crying. any help would be appreciated.
thanks in advance
Ok first question, with MAGLDR are you right clicking and running as administrator, same goes for radio? Next question have you got the latest version of ActiveSync or WMDC installed on your computer so you havecthe most uptodate drives? Third are you outing hour HD2 into bootloadercby holding down the volume down button whilecpowering on your HD2 and then connecting itcyo your computer and waiting forcthe Serial I'm thecwhite bar of bootloader to change to USB then flashing the radio or MAGLDR as administrator?
yes running as admin.
yes latest activesync.
if i try to go through the bootloader and plug in the usb it does change on the screen but it won't connect to the computer.
i get a 238 file read error after running update utility for MAGLDR113 in admin.
i grt a 240 file open error for the new radio
jdbpogo said:
yes running as admin.
yes latest activesync.
if i try to go through the bootloader and plug in the usb it does change on the screen but it won't connect to the computer.
i get a 238 file read error after running update utility in admin.
Click to expand...
Click to collapse
When you use bootloader and connect it to your computer it should say HTC USB sync in the safe to remove device or in your device manager in the control panel that means it is connected to your computer and you can flash the ROM, radio, splash screen, HSPL, MAGLDR, etc. This is a big miss conseption by most people that you have to use ActiveSync to flash whatever you are trying to flash via RUU.
Also, bit of a silly one, but wouldn't be the first,,, when you get the file open errors, you aren't trying to run from within the zip are you? Customruu and the .nbh should be extracted to a folder on their own. There have been cases where people open the zip and try to run ruu without extracting them first.
T-Macgnolia said:
When you use bootloader and connect it to your computer it should say HTC USB sync in the safe to remove device or in your device manager in the control panel that means it is connected to your computer and you can flash the ROM, radio, splash screen, HSPL, MAGLDR, etc. This is a big miss conseption by most people that you have to use ActiveSync to flash whatever you are trying to flash via RUU.
Click to expand...
Click to collapse
yea its showing up but niether method is working. activesync or the bootloader. same error messaes. also if i try to flash a rom i get this error message:
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
Error Description: wait marker fails
Info: .\RSPL\BootLoader.cpp (225)
Ok it sort of souds like you have a bad USB cable and it can no longer do data transfer.
Find the magldr.nbh file in MAGLDR and make a copy of it on your desktop and rename it leoimg.nbh then copy it to the root of your SD card. You may have to use scare reader to do this if you unless you have another USB cable handy then you will not need to do this. Once you have the file on your SD card andcthe SD card back in your HD2 hold the volume down button down while powering on the HD2. This will bring up bootloader bit keep the volume down button pressed until you see searching then let it go. It will ask if you want to flash the image press the end button to confirm and it will flash MAGLDR. You can flash your radio thecsame way but you will have to look for the RUU_signed.nbh file for it but still you will have to copy it and rename it to leoimg.nbh. only put one of these at a time on hour card and flash it. Be director delete the file after you flash the radio or MAGLDR before you copy the next file and flash it, you only want one leoimg.nbh file at a time on your SD card.
You will have t have a working USB cable though to flash either a DAF Android ROM via option #4 of MAGLDR USB Flasher or to flash CWM through option #4 of MAGLDR.
T-Macgnolia said:
Ok it sort of souds like you have a bad USB cable and it can no longer do data transfer.
Find the magldr.nbh file in MAGLDR and make a copy of it on your desktop and rename it leoimg.nbh then copy it to the root of your SD card. You may have to use scare reader to do this if you unless you have another USB cable handy then you will not need to do this. Once you have the file on your SD card andcthe SD card back in your HD2 hold the volume down button down while powering on the HD2. This will bring up bootloader bit keep the volume down button pressed until you see searching then let it go. It will ask if you want to flash the image press the end button to confirm and it will flash MAGLDR. You can flash your radio thecsame way but you will have to look for the RUU_signed.nbh file for it but still you will have to copy it and rename it to leoimg.nbh. only put one of these at a time on hour card and flash it. Be director delete the file after you flash the radio or MAGLDR before you copy the next file and flash it, you only want one leoimg.nbh file at a time on your SD card.
You will have t have a working USB cable though to flash either a DAF Android ROM via option #4 of MAGLDR USB Flasher or to flash CWM through option #4 of MAGLDR.
Click to expand...
Click to collapse
yup got it working now. the sd method worked and i went next door to try a cable from my neighbor and finished the job. i tried the "defective" cable with my other phone and it worked. and files can be transferred to the sd on this phone through that cable but for whatever reason it wouldn't flash a radio or magldr. so i would not have thought of it being bad. strange...
anyway thanks for the help. i wouldn't have thought to flash the radio and magldr through the sd and i would've been up all night pulling my hair out.
Related
Morning....I have HTC HD2, Flashed with current 1.11 MAGDLR and Radio 2.15. I have Flashed NexusHD2-Froyo_V1.9a_NAND and would like to update to current NexusHD2 build. However, when the bootloader is entered into, and Flasher is selected, phone will see USB, but when hooked to PC and DAF is selected to Run in Admin, I get a Error mess, that the computer is not seeing the USB and connecting.
Now seeing that I am VERY new at this.....I don't understand too much about Task 29 or things like that I have read about as far as a fix for the Error. But I cannot seem to find anyone that can tell me how to either fix the issue, or a solution around the problem so that I can either load another ROM or load the update.
I guess I should also add that my phone is running Android from the root side of the phone and not a dual boot with Windows still intact. I think that was important to add somewhere I read.
THanks for any help anyone can give me......
Micki
http://forum.xda-developers.com/showthread.php?t=893948
I had the same problem, when you open the file and it should be daf.exe file or install.exe file, you have to extract that file the a new folder on your computer and then open it from within the folder with right click and use as administrator!!!! worked for me..let me know...
This doesn't belong in the NAND development forum!
Not able to make a usb connection to the phone when in Magldr
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
Go to the Activesync icon in the bottom right corner, right click on it and untick the option "Allow usb connections" and then connect the device again. Run daf.exe (or install.exe) as administrator by right clicking on it and selecting the option (if using Windows7 or Vista). Hopefully the usb drivers will then install and the Android Rom will flash.
Another option could be to uninstall and reinstall Activesync or to try different usb ports on your pc. If that doesnt work and you have Windows XP then you need to try on a machine with Vista or Windows 7.
If none of this works then try taking out your micro SD Card and repeating the process or flash a Custom Rom before you flash Magldr rather than a Stock Rom.
Lastly you could try starting the NAND installer with the phone unplugged and then plugged the phone in. The installer should immediately detect your device and proceed to flash.
nir36 said:
This doesn't belong in the NAND development forum!
Click to expand...
Click to collapse
Someone should move it then
I get to run the DAF.exe, and when i hit next it says "Readme.txt for this release is missing."
Then it says
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
What does all this mean, and what can I do, cause its not letting me flash my rom! Please Help!
I get the same problem there is a notepad file in the folder though does anyone have any idea why this might be so? Thank you so much in advance - best wishes
Aimee
Not trying to run it still zipped up are you?
I got the same thing....awwwwww
If you want to install MAGLDR on your device you have to execute the ROMUpdateUtility and not DAF.
I have the same problem!! Any fix for it now??
After you setup mgldr DONT TOUCH DAF. EXE in the mgldr folder. I had the same problem. This is a misconception caused by the tutirial. If you come to this step you just succeeded to setup mgldr. Now go and get a rom of your choice and get its instructions and flash it.
Sent from my HTC HD2 using XDA Premium App
Hi,
The easiest way to install magldr and other various necessities,is using
THIS TOOL
I have the same issue: but all the solutions say: "If you want to install MAGLDR on your device you have to execute the ROMUpdateUtility and not DAF."
I have magldr running on the HD2 AFTER running ROMUpdateUtility BUT running DAF still comes up with Readme.txt missing, can't find config files.. etc blah blah..
Yes I run it as Adminstrator.:
SO:
1) Why is the readme.txt missing in the first place from the Magldr zip file.
2) How does the config files get created. (are they automatic or when ROMUpdateUtility is ran)??
Why are you running the daf in magldr folder if magldr is already installed? There is no situation where you need to run the daf in the magldr folder.
Because in the forum thread:
http://forum.xda-developers.com/showthread.php?t=893948
In Section 2 Note 3: States to run DAF..????
=========================================
2. FLASH YOUR ANDROID ROM
The Original NAND Android Thread by Cotulla is *HERE*
NOTE1: This section is only applicable AFTER you have flashed MAGLDR to your Device
NOTE2: Make sure your phone is still connected via usb cable before starting
* When your phone Reboots it will Enter the MAGLDR Boot Menu Screen *
1. Press the 'Volume Down' button to goto Option 5: USB Flasher and press the 'Call' button (far left of the 5 hardware buttons at the bottom)
2. The menu will enter Android Flasher mode and install usb drivers if not present
3. Browse to the folder you extracted your NAND Android Package files to on your pc, right click on Run DAF.exe (or Install.exe if DAF.exe isnt present) and select Run as Administrator
4. Read ALL the text and then select 'Next'
5. Read the information and select 'Next'
6. The installer will now detect USB and then flash your Android Rom to NAND
* You can follow this progress on your Phones Screen *
7. When flashing is complete your phone will Reboot and proceed to boot Android from NAND
========================
This guide was suppose to be a guide for us newbeeeeesss!?
LOL
That's why I run DAF.. because I have ROMS in zip format.
That would be referring to the daf.exe that comes with daf style roms, not the daf.exe in the magldr folder.
Those are old style roms, and there aren't many of them left. If a rom is daf style it comes with its own daf.exe
Normally you would
Flash magldr (done)
Flash clockworkmod with the required partition size
Put the zipped rom on SD card
Start clockworkmod
Choose "instal zip from SD"
Job done.
Excellent - thank you.
So if I then want to revert back to the Windows 6.5 stock ROM - Do I reset the partition back to 512Mb?
No, just flash the rom, it will take care of the wiping itself.
OK, I just tried re-installing MAGLDR after a task29 and had the same errors. In the end I used HD2 Toolkit which did the job, but still this is strange: It worked flawlessly the first time I installed it, but not today.
No point reinstalling magldr, since task 29 doesn't touch magldr or radio or spl/hspl.
samsamuel said:
No point reinstalling magldr, since task 29 doesn't touch magldr or radio or spl/hspl.
Click to expand...
Click to collapse
Good to know. Damn, I re-installed radio & magldr, never thought of checking if they are still there. LOL.
Hi guys,
I have a international HTC HD2 win6.5.
I have installed MAGLDR using these 2 post..........
http://www.addictivetips.com/mobile/how-to-boot-android-from-sd-card-of-htc-hd2-with-magldr/
http://www.addictivetips.com/mobile/what-is-magldr-and-how-to-install-and-use-it-on-htc-hd2/
When I boot up now it goes to the MAGLDR bootscreen; how do I make it boot to Windows 6.5?
I believe you don't, it wipes your nand memory so you can then either flash Android or WP7 to the internal memory.
OMG! I didn't know that, I thought it was another version of harret; booting up into harret instead of win6.5..........
hmmmmmm.............is there a win6.5 or win7 I can burn into NAND?
s050399b said:
OMG! I didn't know that, I thought it was another version of harret; booting up into harret instead of win6.5..........
hmmmmmm.............is there a win6.5 or win7 I can burn into NAND?
Click to expand...
Click to collapse
no.
you can have 6.5 with android on sd or wp7 with android on sd or nandroid. no dual-nand.
Thanks!
I would like to have original Win6.5 that comes with HTC HD2, is it available here?
Look at posts in Windows Mobile 6.5 ROM Development section. Especially http://forum.xda-developers.com/showthread.php?t=713977
just donwload the official rom from htc (you have it one their support site) and flash it trough your pc or trough SD card but if you flash it with SD it will Uninstal HSPL
I have just flashed Windows 7 into my NAND, and I want to revert back to Win6.5; How can I installed energy rom?
I tried running "Leo_SoftwareUpgrade.exe", after extracting the energy rom, and it says error, and quits.
metko said:
just donwload the official rom from htc (you have it one their support site) and flash it trough your pc or trough SD card but if you flash it with SD it will Uninstal HSPL
Click to expand...
Click to collapse
I can't flash it thru my PC now, as Windows 7 doesn't do activesnyc.........
this has been asked and answered countless times. it helps to read about how to undo what you are doing before you do it!
answer: simply flash your wm6.5 rom from your sdcard.
metko said:
just donwload the official rom from htc (you have it one their support site) and flash it trough your pc or trough SD card but if you flash it with SD it will Uninstal HSPL
Click to expand...
Click to collapse
It's not possible to flash thru the PC, somehow I can't even transfer files via PC.
How do I flash it thru SD?
I've downloaded it and it's "RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe"
Any progress?
Sent from my HTC Magic/Dream using XDA App
s050399b said:
It's not possible to flash thru the PC, somehow I can't even transfer files via PC.
How do I flash it thru SD?
I've downloaded it and it's "RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe"
Click to expand...
Click to collapse
did you do like ANY research or are you just doing something without knowing what the hell you are doing??
in the first place if you thought you could install MAGLDR and still have WinMo in your first place you probably didn't read anything
and concerning flashing that WinMo ROM back on your phone you might want to try and hit that search button because i've seen it hundreds of times explained exactly how to do it...
no progress.........
not sure what to do now...........the UI interface from MIUI current version is not what I am after
[ Before ]
- Official Win6.5 ROM + MIUI SD ROM from (http://forum.xda-developers.com/showthread.php?t=969661)
- but then he said he not support SD anymore
- so I thought of moving to MIUI on my phone
[ Now ]
- with MIUI directly, I find that I can't access my SD from PC
- UI not nice.......
I feel like moving to Win6.5 + MIUI on SD, I find that with these configuration, I can access everything via activesync, if I didn't like a particular Android on SD, I just remove it from SD and restore it easily............
XthelordinatorX said:
and concerning flashing that WinMo ROM back on your phone you might want to try and hit that search button because i've seen it hundreds of times explained exactly how to do it...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=611433
didn't work; the 3 colored screen just sits there on serial.......
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
from this:
http://www.jayceooi.com/2011/01/01/how-to-upgrade-htc-hd2-rom-through-sd-card-video/
20. You should get ‘Red, Green, Blue and White’ screen with SPL-2.08.HSPL.
21. Let go volume down button when you see ‘loading…’.
22. Then ROM upgrade screen will be loaded.
I don't get to "21"...........it just sits on "Serial"............
Oh! Stupid me!
I am able to flashed to official ROM now;
[ STR ]
- connect USB
- restart phone and hold down "power" + "volume down"
- the boot menu should change to USB
- and wait for computer to install proper drivers for it
- THEN!! run RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
I know the problem now, it's because I didn't wait for the computer to finish installing the drivers to communicate with phone
s050399b said:
Oh! Stupid me!
I am able to flashed to official ROM now;
[ STR ]
- connect USB
- restart phone and hold down "power" + "volume down"
- the boot menu should change to USB
- and wait for computer to install proper drivers for it
- THEN!! run RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
I know the problem now, it's because I didn't wait for the computer to finish installing the drivers to communicate with phone
Click to expand...
Click to collapse
like i told you.. searching works
XthelordinatorX said:
like i told you.. searching works
Click to expand...
Click to collapse
Wrong!
Searching leads me to nothing....................
And I sit down thinking to myself; and slowly a bulb lights up!! Why am I so keen to use SD to flash...........and then voila~~
Wow glad everything's fine now. We need you in here to also help others with similar problem.
Great job. I been too busy since my last post in this thread. I was going to help you solve this problem but you the man.
Sent from my HTC HD2 using XDA App
Hi everyone...
I had for a very long time Android on my HD2 but now I want to install Stock WinMo and install an Android ROM clearly...
So I booted the device to the tri-colored screen and connected it to the pc BUT the phone doesn't check that it's connected (usally there stands 'SERIAL' and when it's connected it should show 'USB'). So I can't install the ROM...
Can anyone help me?
-the_hd2_cracker
the_hd2_cracker said:
Hi everyone...
I had for a very long time Android on my HD2 but now I want to install Stock WinMo and install an Android ROM clearly...
So I booted the device to the tri-colored screen and connected it to the pc BUT the phone doesn't check that it's connected (usally there stands 'SERIAL' and when it's connected it should show 'USB'). So I can't install the ROM...
Can anyone help me?
-the_hd2_cracker
Click to expand...
Click to collapse
hi
you can try sd card method...
Download stock Rom - shipped ... extract using 7-zip ( winrar etc) ... rename Ruu_Signed.nbh to LEOIMG.nbh ... format sd card ( fat 32)... copy leoimh.nbh in sd card put it in hd2 go into bootloader and follow instruction on screen.
ubejd said:
hi
you can try sd card method...
Download stock Rom - shipped ... extract using 7-zip ( winrar etc) ... rename Ruu_Signed.nbh to LEOIMG.nbh ... format sd card ( fat 32)... copy leoimh.nbh in sd card put it in hd2 go into bootloader and follow instruction on screen.
Click to expand...
Click to collapse
Thanks a lot!!!
It worked!
the_hd2_cracker said:
Thanks a lot!!!
It worked!
Click to expand...
Click to collapse
im glad for you
i have a question ... does usb connection works now ?
ubejd said:
im glad for you
i have a question ... does usb connection works now ?
Click to expand...
Click to collapse
not with my computer (win7) but with another (win vista)
I my opinion, you should not connect the USB cable befor be in tri-color-screen.
1.) power on the hd2 and go into the tri-color-screen, by hold pressing 'power off' button. There have to appear "serial"
2.) connect the usb cable with the hd2 and the pc
3.) windows show notify, that there is a new (unknown) device
4.) if the driver install fails, you should look for windows updates. the may requiered update is hidden at 'optional updates'. select this and install it.
5.) disconnect and connect the connection between hd2 and pc
If this does not work, you could try to install the 'htc sync' which is used for android. But I´m not sure, if this should help ...
If you are using an 64-Bit windows 7, the driver works in the attachment works fine
Alternatively use the drivers form this post:
http://forum.xda-developers.com/showthread.php?t=338473
Best regards
Ok well I have been trying to do this for quite some time and never found a solution, I had android 2.3.3 installed on my previous phone and eventually had to use CLK files to upgrade my HD2. That one unfortunately messed up and I received a replacement, and cannot even install an HSPL 2,3, or 4 to unlock the phone because the software does not even boot. I've tried using Ksubedis tool and same thing I will post a picture please someone help its frustrating using WM 6.5.
Right click and "run as administrator " and use USB slot in back of PC case,not front.
samsamuel said:
Right click and "run as administrator " and use USB slot in back of PC case,not front.
Click to expand...
Click to collapse
Using a Windows 7 HP Laptop 64-Bit only two USB ports(both USB 2.0) they are on the left side, but as you see on the picture nothing comes up not even an error. So idk what is going on.
There's a fair number of threads where 64bit windows doesn't work.any chance you have another machine available?
Also firewall off,anti virus off,and redownload the .exe
Are you running as admin. Is it your laptop do you have admin privileges?
Sent from my HTC HD2 using XDA App
samsamuel said:
There's a fair number of threads where 64bit windows doesn't work.any chance you have another machine available?
Also firewall off,anti virus off,and redownload the .exe
Click to expand...
Click to collapse
I sold my windows vista, but I have not tried downloading with firewall and antivirus off but have tried installing with both off
whynot66 said:
Are you running as admin. Is it your laptop do you have admin
Click to expand...
Click to collapse
I have tried running as administrator but same conclusion, and I only have one account on the laptop so it does have admin and it is mine
and I only have one account on the laptop so it does have admin and it is mine
Click to expand...
Click to collapse
That makes no difference, still should manually run as admin. Not that that's the problem in this case, just adding info.
Well i see there isn't a soultion then, guess ill have to use an older PC to flash my phone, sucks kinda wished i hadnt sold my old pc
nawfboy09 said:
Well i see there isn't a soultion then, guess ill have to use an older PC to flash my phone, sucks kinda wished i hadnt sold my old pc
Click to expand...
Click to collapse
The Rom I have Listed in this Tutorial is said to be the BEST PERFORMANCE ROM. And its SYSTEM PARTITION SIZE IS 400M. And CACHE SIZE 5M. Use it if you like or find your own Rom of Preference and flash that specific Roms Size Partition or it will not boot.
Do You have HSPL 2.08 on this?
1.If Not Use Ksubedi's Toolkit and Go into BootLoader VIA Volume Down and Power Button Simultaneously. and Connect Phone to PC wait for "USB" at Top Center of White Strip.
2. Click HSPL 2.08 in Toolkit, while in BootLoader. Let it Finish.
3. Enter BootLoader one more Time. This time click Install MAGLDR in Toolkit. With Partition Size of which rom you want to flash highlighted. and Correct Cache Size, Partition and Cache Size can be determined by the OP of the Rom you want to Flash.
4. Once Flashed, Hold POWER DOWN. Until you see 12 Options.
5. Go to Option "5. USB Flasher." wait for "Wait USB...USB" (Note Phone Needs to be Connect to PC During whole Process).
6. Use Daf.exe from this File: http://hotfile.com/list/1335611/19f8a51
and Download File HD2_Core_Droid_Desire_HD_V1.6_TMOUS_NAND_ONLY_LEO1024.rar.
7. Once Download and you are in Option 5. Run the DAF.exe in the above file and RUN AS ADMINISTRATOR. Idk why but now devs don't want to include the Daf.exe with their latest builds.
8. Once Daf.exe is finished. Boot into MAGLDR again and go to Option "8. AD Recovery." This time.
9. Partition SDCard, if you haven't done so already, in Advanced Menu with size 1024M and Swap size 0M.
10. Then "Mount USB Storage" Then "Mount USB" and Copy Zip to SDCard.
11. Flash and Reboot.
rafiqzadah said:
The Rom I have Listed in this Tutorial is said to be the BEST PERFORMANCE ROM. And its SYSTEM PARTITION SIZE IS 400M. And CACHE SIZE 5M. Use it if you like or find your own Rom of Preference and flash that specific Roms Size Partition or it will not boot.
Do You have HSPL 2.08 on this?
1.If Not Use Ksubedi's Toolkit and Go into BootLoader VIA Volume Down and Power Button Simultaneously. and Connect Phone to PC wait for "USB" at Top Center of White Strip.
2. Click HSPL 2.08 in Toolkit, while in BootLoader. Let it Finish.
3. Enter BootLoader one more Time. This time click Install MAGLDR in Toolkit. With Partition Size of which rom you want to flash highlighted. and Correct Cache Size, Partition and Cache Size can be determined by the OP of the Rom you want to Flash.
4. Once Flashed, Hold POWER DOWN. Until you see 12 Options.
5. Go to Option "5. USB Flasher." wait for "Wait USB...USB" (Note Phone Needs to be Connect to PC During whole Process).
6. Use Daf.exe from this File: http://hotfile.com/list/1335611/19f8a51
and Download File HD2_Core_Droid_Desire_HD_V1.6_TMOUS_NAND_ONLY_LEO1024.rar.
7. Once Download and you are in Option 5. Run the DAF.exe in the above file and RUN AS ADMINISTRATOR. Idk why but now devs don't want to include the Daf.exe with their latest builds.
8. Once Daf.exe is finished. Boot into MAGLDR again and go to Option "8. AD Recovery." This time.
9. Partition SDCard, if you haven't done so already, in Advanced Menu with size 1024M and Swap size 0M.
10. Then "Mount USB Storage" Then "Mount USB" and Copy Zip to SDCard.
11. Flash and Reboot.
Click to expand...
Click to collapse
Yes i understand the process this is my third phone flashing, actually ive flashed numerous phones and never encountered this error. as you see in the picture, after clicking DAF.exe the screen pops up but nothing happens it doesnt even let me know if i encountered an error. which i am assuming its the windows 7 64 bit, and i can't even flash an HSPL with this...and ive tried using ksubedis tool and same conclusion
ok well i discovered that when trying to flash the HSPL4 and click on the DAF.exe the font is invisible but it gives me an option to flash it or cancel you cant see it but when you move the cursor to the bottom right hand corner you see two hollow boxes, the one on the right is to cancel installation as you see if you click on it, and when you move the cursor a little over to the left is to install the HSPL and the next window gives you the option to install which ever HSPL you need. Then I used ksubedis tool to install MAGLDR which i could, then i installed it, but when i attempted to partition i could not flash it. so i just went back to clk, so now i can flash clk only though. dont know whats going anymore.
Its not the problem with the OS. Because I have the same OS, Windows 7 64bit. Well I suggest trying it on another PC or Laptop, whichever is your preference. And another thing I can say is to right click the DAF.executive and then properties and change the compatibility mode to Windows 98? Or Windows XP?
And BTW have you tried running the DAF that is in the file I told you to download earlier? Cuz maybe the Daf.exe you're running now is corrupted?
Sent from my HTC HD2 using XDA App
rafiqzadah said:
Its not the problem with the OS. Because I have the same OS, Windows 7 64bit. Well I suggest trying it on another PC or Laptop, whichever is your preference. And another thing I can say is to right click the DAF.executive and then properties and change the compatibility mode to Windows 98? Or Windows XP?
And BTW have you tried running the DAF that is in the file I told you to download earlier? Cuz maybe the Daf.exe you're running now is corrupted?
Click to expand...
Click to collapse
I have not tried it with the file you provided, but after I install it where do i insert it, and I have downloaded various forms of different ROMS, and tools that use DAF.exe and always the same result. also ive tried changing the compatibility of the tools by right clicking and clicking on troubleshoot compatibility and changing it vista and other older forms of windows and no luck
ok i also discovered when trying to repartition with Ksubedis tool for a ROM and the same happened when trying to install the HSPL, invisible font but this time you dont see the hollow boxes, but there are two boxes on the bottom right as you would when flashing an HSPL. Finally i can use MAGLDR once again even though CLK was easier.