hello all,
My girlfriend have a Sony Ericsson xperia x10i and after i've upgraded the rom to 2.1 the power management is f** up mostly, if you want to power it up it will show that it is loading. But after a while the battery is still at the same percentage.
And i dont know anything to fix this the only thing that came on my mind is flashing back to 1.6....
Does anyone have a solution for this ?
i've been trying to get that usb port to work but it doesn't load, and the pc doesn't recognize it. So i think the usb port died snif.
well if anyone has a solution please share it with me here
Hello,
I've been trying all day to unbrick my xperia x8 phone with no success.
This is what succeded:
1) I changed the lcd
2) tried a hard reset with no success
3) tried to update with sony ericsson update software several times, trying different things each time.
4) tried all kinds of different solutions posted on these forums.
These are the problems I'm finding at the moment.
1) When I try to turn the phone on, it blinks between light black and nothing, slowly. No led turns on.
2) I can't mange the phone memory stick files when connected through usb
3) when i take off the battery and plug it usb or to the plug, i see the orange light, indicating that it's charging. But when I try to turn it on, the light never comes up again until I remove the batery again.
4) The only way I updated the phone via sony ericsson software, while holding the c button to detect the phone. But other software can't detect the phone, and the green light goes out very quickly. (unless using sony ericsson update software).
I can't find a solution for this. Would greatly appreciate some help. Thankyou.
gremory said:
Hello,
I've been trying all day to unbrick my xperia x8 phone with no success.
This is what succeded:
1) I changed the lcd
2) tried a hard reset with no success
3) tried to update with sony ericsson update software several times, trying different things each time.
4) tried all kinds of different solutions posted on these forums.
These are the problems I'm finding at the moment.
1) When I try to turn the phone on, it blinks between light black and nothing, slowly. No led turns on.
2) I can't mange the phone memory stick files when connected through usb
3) when i take off the battery and plug it usb or to the plug, i see the orange light, indicating that it's charging. But when I try to turn it on, the light never comes up again until I remove the batery again.
4) The only way I updated the phone via sony ericsson software, while holding the c button to detect the phone. But other software can't detect the phone, and the green light goes out very quickly. (unless using sony ericsson update software).
I can't find a solution for this. Would greatly appreciate some help. Thankyou.
Click to expand...
Click to collapse
If you had searched this forum, you would have found this. Good luck.
Thank you for your reply.
I had tried that before, and tried it again. I still have the same problem.
The Update Service Version i used was the one recommended at Sony Ericsson Support Center website. 2.11.1.9
Any other suggestion?
Thanks in advance
gremory said:
Thank you for your reply.
I had tried that before, and tried it again. I still have the same problem.
The Update Service Version i used was the one recommended at Sony Ericsson Support Center website. 2.11.1.9
Any other suggestion?
Thanks in advance
Click to expand...
Click to collapse
If you used PC companion then I recommend trying the Sony Ericsson Update service. If you already tried that then, try the PC companion. If you tried both and they are not working, then use the flash tool.
Thankyou,
Yes I have tried both.
The flash tool is at sony ericsson's support center?
gremory said:
Thankyou,
Yes I have tried both.
The flash tool is at sony ericsson's support center?
Click to expand...
Click to collapse
Flash tool is on this forum,search a little bit.
Ok, I just flashed it using the software version 2.3.
And I'm still in the same scenario.
I do have some questions though.
Should I flash it with the micro sd in?
After flashing it using the software, should it be ready to run?
I flashed the phone using android 1.6.
Thank you.
You flashed versioon 2.3??? From which phone?
Maybe your new LCD is damaged and it can't show anything..
@[email protected]
I believe is a typing error lol
Sorry, it was indeed.
What I meant was, I flashed the phone using the Flashtool version 0.2.3.
Sorry for double posting but, regarding the new lcd.
I bought it on ebay, and, I think it's not damaged. I also think I did not damage the phone changing it, I used specific tools and was very careful.
If it was the screen, the led should at least blink red a couple of times while turning it on shouldn't it?
I haven't notified it, you should insert a withoutPIN-SIM and after a while try to call the phone, if it is on you should ring, otherwhise...
Tried that and nothing.
Anyway of finding out what the problem really is? :s
Because I see that I can flash the phone and update it's firmware with three different softwares.
Sony Ericsson Update Service
Sony Ericsson PC Companion
X10 Flash tool 0.2.3 by Bin4ry
I have another question, can I unplug the cellphone after the firmware flash?
It says so, but the led is still green.
Just trying to find the real problem here :s
Thanks for all the support though.
gremory said:
I have another question, can I unplug the cellphone after the firmware flash?
It says so, but the led is still green.
Just trying to find the real problem here :s
Thanks for all the support though.
Click to expand...
Click to collapse
i read all the post. according to your description it seems to be hardware related problem not software 100%. cauz as you said you can change the firmware. then that mean you really need some pro help. just contact with your lcd supplier and ask help from them. they can help you if you dont want to go to technician..!!!!!!!!!!!!!!!!!!!
That's what I'm thinking, but I don't think it's the lcd.
The old one shows with a crack in it, the new one shows no crack. Both show a blank screen.
Might be something else, trying to find out what :s
Ok, seems that the problem is from the new lcd.
I found this because, when I place the old one, after a while, I see the red led blink a couple of times.
And with the new one, I don't see any of that.
So, it can only be that, in my opinion.
Thanks for everything anyway.
Best regards.
I recently sold my i9000 and the buyer has some questions/concerns (in red).
Details:
16gb version
Stock JVO
(I bought it right when the i9000 came out, so it's one of the first)
1) "The phone freezes at times and I have to take the battery out and restart it, you know whats up with that?"
Does gingerbread have more freezes then froyo? I think it might be certain apps.
2)"I am tying to connect the tv out cable to my monitor via DVI, but I get nothing on screen."
I included the nokia tv usb cable, BUT i also included an adapter for rca to vga/DVI. I am not surprised it doesn't work, since it's made for RCA (not dvi). Any thoughts on this?
3) "Is the phone repaired? screen changed maybe? I see a yellow tint on the screen compared to my vibrant"
What color adjusting tools are available for gingerbread? I know the speedmod kernal has color tuning, but I can't think of any gingerbread apps for color adjustment.
Thanks to anyone who responds.
1) it depends when you installed JVH on the device, JVH was in BETA mode for quite some time, so some bugs could still remain, Was this official JVH or through samfirmware or similar ?
2) Also depends on the above, Does this version of Gingerbread support TV out ?
3) There are some apps / kernels that can adjust screen colours - try the voodoo control app, it requires root and supporting kernel.
Firstly i would tell this "Guy" to do a full factory reset / then if problems persist swap ROMs and see if there is any difference, Then i would say "tough ****" sold as seen and delete his future messages lol --- Joke
Sorry if i aint been much help, its been so long since i was on a samsung based ROM, i forget the way they work lol
1) Double checked, it's actually JVO, not JVH.
2) I don't know. When I tried it, I was using Froyo. I will have to ask him to go to the display settings menu and check for TV out.
Thanks for your reply.
dear all
my X10 is totally black out, no red light, no any light, screen do not turn on.
battery is fully charged as it works perfect in my bro's x10
i know SEUS may help to recover the phone, but the problem is SE website said SEUS is no longer avaliable for X10, they only give me the download link for PC companion 2.0
and i have this already.
anyone know where can i find the SEUS to download?
or PC companion also can do the same thing?? many thanks!
http://www.sonyericsson.com/cws/sup...ads/subject/pccompanion/xperiax10?cc=gb&lc=en
Hi. Basically, my phone is stuck on the Sony Ericsson screen. I know it can all be fixed by re-flashing or clicking on the repair bit on PC Companion however the usb port is broken on the phone and my local shop couldn't repair it. Does anyone have any suggestions? The phone is worth nothing otherwise...
By the way, it is rooted and stuck on the SE screen because i deleted the stock launcher and then tried doing a factory reset on the phone (face palm moment...)
Thanks!
Well, no. Try a different cable with your phone. Only suggestion I can make so you can reflash it. Well good luck.
Sent from a pyramid in Canadadada