Related
ok, typically i've had no problems installing custom roms. i put rubix on here last night and really don't like it that much. well, my sd card crashed somehow also so i lost all my backups. so, i went into rom manager and was going to reinstall zapx. it went through all the functions and now i'm stuck on the rubix boot screen. it just keeps reloading... i was rooted with 2.2, so what do i need to do now? please help asap. i really need my phone today!!!!
edit:
ok so from looking around i've found that i need to flash the sbf file using rsd lite 4.8. ok so i dl'd rsd no problem. i dl the sbf file and click to open and it doesn't work. i tried to "use rsd" to open and still nothing... am i missing something on my pc to run this sbf file?
edit #2:
so i got the sbf file to run in rsd... install went good and fast. phone boots up to "welcome to droidx touch the android to begin", i touch it and nothing happens... just flashes. emergency dial won't work, change language does work... thats it... please help!!!
LAST EDIT:
got it figured out... was looking in the wrong place for the file... soooo, nevermind to all help... oh wait....................
brandon2x said:
ok, typically i've had no problems installing custom roms. i put rubix on here last night and really don't like it that much. well, my sd card crashed somehow also so i lost all my backups. so, i went into rom manager and was going to reinstall zapx. it went through all the functions and now i'm stuck on the rubix boot screen. it just keeps reloading... i was rooted with 2.2, so what do i need to do now? please help asap. i really need my phone today!!!!
edit:
ok so from looking around i've found that i need to flash the sbf file using rsd lite 4.8. ok so i dl'd rsd no problem. i dl the sbf file and click to open and it doesn't work. i tried to "use rsd" to open and still nothing... am i missing something on my pc to run this sbf file?
edit #2:
so i got the sbf file to run in rsd... install went good and fast. phone boots up to "welcome to droidx touch the android to begin", i touch it and nothing happens... just flashes. emergency dial won't work, change language does work... thats it... please help!!!
LAST EDIT:
got it figured out... was looking in the wrong place for the file... soooo, nevermind to all help... oh wait....................
Click to expand...
Click to collapse
I personally like it when I get to take both sides of the conversation. I usually agree with myself (usually).
Glad you figured it out.
yeah that was fun. i'm learning sooo much about these things. it actually makes me happy when i figure it all out on my own without having to wait on answers... after all the messing with roms and everything, now that i have the 2.2 ota sbf installed, i re-rooted and its running great. not sure i'll even put a different rom on anymore. no need really. i'm overclocked and i hit a 1665 quadrant score. rubix was great except the camera app. even with the 8mp fix on the cam and 720p fix on camcorder i just hate the way it doesn't use the widescreen effect like on the stock camera... thats my 2 cents about my situation today!
I bought a DX earlier this week. It was updated to system 2.3.340 before i left the store. I also have a D2 and experience flashing ROMs and SBFing. What is puzzling me here is that no matter what ROM I install i get random reboots. This happens no matter what apps, activities, etc... i am doing, even when just idle, i will look down and phone is rebooting. I haven't tried SBFing the DX yet because i can't find a clear answer on how i need to do it. I know that a full .340 SBF does not exist yet. I have a full .32 SBF file and a system only .340 file. I am assuming that i would flash the .32 full, then the .340, or could i just flash the .32 and then let the phone update the factory way to .340? I am getting this reboot problem with Rubix 1.9.5, Fission 2.4.3, and GummyJar 2.5. Any advice, input, or help would be greatly appreciated. THanks in asvance.
willjohnson said:
I bought a DX earlier this week. It was updated to system 2.3.340 before i left the store. I also have a D2 and experience flashing ROMs and SBFing. What is puzzling me here is that no matter what ROM I install i get random reboots. This happens no matter what apps, activities, etc... i am doing, even when just idle, i will look down and phone is rebooting. I haven't tried SBFing the DX yet because i can't find a clear answer on how i need to do it. I know that a full .340 SBF does not exist yet. I have a full .32 SBF file and a system only .340 file. I am assuming that i would flash the .32 full, then the .340, or could i just flash the .32 and then let the phone update the factory way to .340? I am getting this reboot problem with Rubix 1.9.5, Fission 2.4.3, and GummyJar 2.5. Any advice, input, or help would be greatly appreciated. THanks in asvance.
Click to expand...
Click to collapse
try here http://rootzwiki.com/index.php/Smartphones/Motorola/Droid-X/Droid-X.html#comment220 scroll down towards the end (idk if you use windows or linux but the linux method of sbf'ing is alot easier ive used both) except in their directions it says an older sbf file just insert the one you have, then go here http://www.mydroidworld.com/forums/...ystem-baseband-2-3-340-kernel-bootloader.html to download these zip files for kernel updater, 340 system update your baseband and bootloader should already be the correct ones, (i recently bought my X too) then once you finally root your newly sbf'd X and installed droid x bootstrap etc and get into clockwork mod recovery you can flash those 2 zips (recommend flashing only one at a time, reboot, and do the next) and then you should be updated to full .340
gl
http://forum.xda-developers.com/showthread.php?t=869007
heres a thread with discussion about those update zips
Thanks for the quick replies. Gonna try your suggestion tonight or tomorrow. Now i get random lock ups followed by a boot after about five minutes. The only upside right now is that its 4 days old so if i can get some resemblance of factory back on it then i can just exchange it Thanks again will report back with results.
And also by "insert the file you have", i assume you mean the file i have that is VRZ_MB810_2.3.32_01.sbf is the file i need to use in RSD Lite, then update the other files with clockwork recovery?
Thanks again.
willjohnson said:
And also by "insert the file you have", i assume you mean the file i have that is VRZ_MB810_2.3.32_01.sbf is the file i need to use in RSD Lite, then update the other files with clockwork recovery?
Thanks again.
Click to expand...
Click to collapse
correct tho the one i used had was labeled VRZ_MB810_2.3.32_1FF_01.sbf
I guess the one i got is ok? it came from the TBH app from the market? I would like to get ahold of the one you got too if thats possible, since you know that file works.
LOL i am a dumbass, left the FF part out for somereason, thats the exact file name i have. Thanks again.\
Edit- Just tried this, i don't know whats wrong but it has the start button in RSD Lite greyed out when i select the file, its the exact one listed above. Gonna try same file from different locations
Ok, so now i am starting to worry. Tried 3 different .320 full sbf's. All the same result. Failed process close to the begging. Then on the phone it says
Critical Error
FEBE
0047
Please Helppppp. I don't need a really expensive paperweight, all i need to do is get it so that GummyJar doesn't show on boot and i can take it back, its brand new.
Try removing the battery. Then boot into recovery (volume down + power) then do a factory reset/restore.
Sent from my ADR6300 using XDA App
Tried that, i finally got it to flash, i had the phone in the desk dock, didn't think about it. Once i plugged it into the usb cable direct everything went fine(so far). Also i noticed that with this phone and my wifes D2, i have to put a (1) at the end of the sbf file name to get RSD Lite to use it, otherwise the start button stays greyed out. THanks for the replies and help, will post again if there are any more problems.
willjohnson said:
Tried that, i finally got it to flash, i had the phone in the desk dock, didn't think about it. Once i plugged it into the usb cable direct everything went fine(so far). Also i noticed that with this phone and my wifes D2, i have to put a (1) at the end of the sbf file name to get RSD Lite to use it, otherwise the start button stays greyed out. THanks for the replies and help, will post again if there are any more problems.
Click to expand...
Click to collapse
ive heard there are several problems with rsd lol thats why ive stuck with my ubuntu/Linux its 10x easier
willjohnson said:
I guess the one i got is ok? it came from the TBH app from the market? I would like to get ahold of the one you got too if thats possible, since you know that file works.
LOL i am a dumbass, left the FF part out for somereason, thats the exact file name i have. Thanks again.\
Edit- Just tried this, i don't know whats wrong but it has the start button in RSD Lite greyed out when i select the file, its the exact one listed above. Gonna try same file from different locations
Click to expand...
Click to collapse
i also believe you DO have to have it all in specific locations but idk i use linux to do it, if you continue to play with the X after u get new one i would read up on how to dual boot ubuntu its a whole lot easier once you find ur way around i have it booting off of a 1TB external hard drive no need to install the correct moto drives etc..just plain easy lol
Finally total success!!!! Flashed .320 Full SBF, then used the Kernel and System updates you referenced and bam, back to stock. Now i feel better about ROM flashing, cause i can recover from most anything with this process. THanks again for your help and info.
willjohnson said:
Finally total success!!!! Flashed .320 Full SBF, then used the Kernel and System updates you referenced and bam, back to stock. Now i feel better about ROM flashing, cause i can recover from most anything with this process. THanks again for your help and info.
Click to expand...
Click to collapse
it only takes once correctly doing it to feel comfortable lol also make sure using droid x bootstrap recovery make sure to tap the first choice and let it do its thing, otherwise it will constantly reboot to recovery EVERY time you turn it back on
Well... the SBF and updating where successful. But even after the SBF, SD Card Formating(Long format in windows, then 3 times on phone to be sure), clean install and download of all Fission stuff i normally use, still get random reboots. Gonna SBF again and try Rubix and see how that goes. If it still has problems too, i may SBF again and go to the store and return phone for a new one.
willjohnson said:
Well... the SBF and updating where successful. But even after the SBF, SD Card Formating(Long format in windows, then 3 times on phone to be sure), clean install and download of all Fission stuff i normally use, still get random reboots. Gonna SBF again and try Rubix and see how that goes. If it still has problems too, i may SBF again and go to the store and return phone for a new one.
Click to expand...
Click to collapse
try something blurless like darkslide, which im currently running, no random reboots
Funnyface19 said:
try something blurless like darkslide, which im currently running, no random reboots
Click to expand...
Click to collapse
LOL funny you should mention, thats what i actually decided to go with instead. It really looks great, seems to be seemless too. Since you use it maybe you could tell me... Can you overclock? I downloaded the blurless version from their link and it has the blur alarm clock and a few others? is this right or is something wrong with the link? Thanks again.
willjohnson said:
LOL funny you should mention, thats what i actually decided to go with instead. It really looks great, seems to be seemless too. Since you use it maybe you could tell me... Can you overclock? I downloaded the blurless version from their link and it has the blur alarm clock and a few others? is this right or is something wrong with the link? Thanks again.
Click to expand...
Click to collapse
Well I haven't overclocked yet anyway the phone gets hot enuf lol plus coming from an Eris 1k is fast lol
Um yeah it should be wright depends on what the blur clock looks like lol
Sent from my DROIDX using XDA App
I looked back at there post in another forum and it actually says that they added a few Blur parts in the blurless rom. I guess some blur things just work better.
willjohnson said:
I looked back at there post in another forum and it actually says that they added a few Blur parts in the blurless rom. I guess some blur things just work better.
Click to expand...
Click to collapse
yeah but the obsidian rom is completely blurless just not everything working
Running DarkSlide4.1 can't tell u last I had a reboot
Sent from my DROIDX using XDA App
Ok i need help unrooting my DX. I rooted it with Z4Root and i tried to unroot, it said it did but Super still installed. I have the fission rom manager theme installed but no app icon which I have nothing on my SD Card cause my friend who works at verizon wiped it after i told him not to. so i cant boot into recovery thru bootstrap. Im stuck can some one please help me
Rerooting might help. Are you trying to go back to stock?
Sent from my DROIDX using Tapatalk
yes im wanting the thunderbolt. i rooted the dx and unrooted it using Z4
im wanting to go back to stock no fisson, roms etc
whitetiger2429 said:
im wanting to go back to stock no fisson, roms etc
Click to expand...
Click to collapse
You're going to want to use SBF. Search for it on these forums. Bascially it will take you back to stock with no root and format memory. It may seem a bit complicated to some, but it is really easy.
I agree with cstrife. SBF'ing is not very hard to do and it will get you back to 100% stock. I've done it several times myself. Just make sure you get the correct system version
Ok so as my previous post stated I just got my droid x and rooted it. I am in the process of installing a rom but have failed at this point.
For starters I have the droid x bootstrap installed and "running". Buy "running" I mean I can get to the clockwork recovery but only buy the bootstrap button or battery pull for 1min then boot. Booting while holding the home button stops at the exclamation android guy. I cant get past it no matter how hard I push the search button . So thats one of my problems but not a big one.
When I went to install liberty 1.5 I did a data factory reset and catch wipe then installed the rom. It got stuck on the liberty logo. So I tried again this time following the guide on these forms on how to install a rom correctly. Same thing. I tried three more times following three different guides and still was stuck at the liberty logo. So I gave up and followed the install guide on these forms again, but just restored from my backup. I am good and running again but I still have the liberty logo, which from what I read is normal.
When I got home from work I started digging into why it didn't work and found several things that may cause it. Now this is where I get lost. I have read the sometimes it just fails and you need to try again. But I also read the doing a SBF will also fix this. So I dug into what a SBF is and how to do it since this seams to be the #1 fix for everything. WHAT, UHH, MMMMM, K. So I read you will need to flash 2 files to SBF successfully. I have no problems with the RSD lite as it is only one file and you cant screw that up. But then I comes to choosing the right SBF file for your phone I get lost. All the versions listed are WAY below what I have. I am currently on 4.5.588. So I jumped over to androidforms to see if theirs anything their. They list x.x.596 as the most recent OTA but when I go to check for updates it says there are none.
SO, my questions are:
Is the reason I cant flash the liberty rom because I am running 4.5.588?
What do I flash if I need to SBF?
What am I missing about this OTA update? Is it being rolled out now or is my rom the most recent OTA?
Is their anything else I need to know that might help me in the future? Like I said I am new to this area of the forms and have not clew whats being released, changed, rooted, or what ever else.
I came from a rooted eris so Im not root dumb. But their is a big difference between the eris and the X.
ANY HELP WOULD BE AWESOME THANKS!!!!!!!!
BrownEye02 said:
Ok so as my previous post stated I just got my droid x and rooted it. I am in the process of installing a rom but have failed at this point.
For starters I have the droid x bootstrap installed and "running". Buy "running" I mean I can get to the clockwork recovery but only buy the bootstrap button or battery pull for 1min then boot. Booting while holding the home button stops at the exclamation android guy. I cant get past it no matter how hard I push the search button . So thats one of my problems but not a big one.
When I went to install liberty 1.5 I did a data factory reset and catch wipe then installed the rom. It got stuck on the liberty logo. So I tried again this time following the guide on these forms on how to install a rom correctly. Same thing. I tried three more times following three different guides and still was stuck at the liberty logo. So I gave up and followed the install guide on these forms again, but just restored from my backup. I am good and running again but I still have the liberty logo, which from what I read is normal.
When I got home from work I started digging into why it didn't work and found several things that may cause it. Now this is where I get lost. I have read the sometimes it just fails and you need to try again. But I also read the doing a SBF will also fix this. So I dug into what a SBF is and how to do it since this seams to be the #1 fix for everything. WHAT, UHH, MMMMM, K. So I read you will need to flash 2 files to SBF successfully. I have no problems with the RSD lite as it is only one file and you cant screw that up. But then I comes to choosing the right SBF file for your phone I get lost. All the versions listed are WAY below what I have. I am currently on 4.5.588. So I jumped over to androidforms to see if theirs anything their. They list x.x.596 as the most recent OTA but when I go to check for updates it says there are none.
SO, my questions are:
Is the reason I cant flash the liberty rom because I am running 4.5.588?
What do I flash if I need to SBF?
What am I missing about this OTA update? Is it being rolled out now or is my rom the most recent OTA?
Is their anything else I need to know that might help me in the future? Like I said I am new to this area of the forms and have not clew whats being released, changed, rooted, or what ever else.
I came from a rooted eris so Im not root dumb. But their is a big difference between the eris and the X.
ANY HELP WOULD BE AWESOME THANKS!!!!!!!!
Click to expand...
Click to collapse
im no pro but hopefully this info will help you, it did me.
http://forum.xda-developers.com/showthread.php?t=1073841 liberty info
http://forum.xda-developers.com/showthread.php?t=1085323 sbf'ing
The new 2.3.3 OTA is stable and very nice looking on my DX, OTA not rootable yet but give it time.
Biggest life saver about the DX is the the part of the phone that ppl mess up and turn their phones to bricks is extremely safe on the X, not bulletproof but all the info in these forums I believe can bring them back regardless of what happens. I was very overwhelmed at first with my X but very comfortable now that ive successfully managed the sbf.
Yeah that's one of the things I really noticed. If you brick your phone it seams its not the end. So im still a little confused with your explanation on SBFing. You say that 2.3.3 is the latest OTA but its not rootable. So am I looking at the wrong number when I say my version is 4.5.588.
Sent from my Rooted DROIDX.
Reading the noobs guide to droid x allowed me to figure out that I have the 30.04 bootloader and I will need to flash the 2.3.34 file. But I would still like to know why my version is so much higher then 2.3.34.
By far, this is the easiest way to sbf back to stock froyo
http://www.droidxforums.com/forum/d...-solution-your-windows-rsd-lite-problems.html
Sent from my Xoom using XDA Premium App
chbennett said:
By far, this is the easiest way to sbf back to stock froyo
http://www.droidxforums.com/forum/d...-solution-your-windows-rsd-lite-problems.html
Sent from my Xoom using XDA Premium App
Click to expand...
Click to collapse
WOW that is easy. To bad you cant select what version it flashes. But still EASY. Ill keep that in mind if I need to SBF. THANKS!
http://droidmodderx.wordpress.com/how-to-sbf-your-droid-x-full-2-3-340/
Good video tutorial there... It also has files there as well
Sent from my DROIDX using XDA App
Well I gave liberty 1.5 another try and it still got stuck on the liberty screen. Any ideas?
Sent from my Rooted DROIDX.
Was able to flash the liberty gingerbread rom tonight! I am kind of wondering if the version of ota/bootloader I have is the reason liberty 1.5 wouldn't work for me.
BrownEye02 said:
Reading the noobs guide to droid x allowed me to figure out that I have the 30.04 bootloader and I will need to flash the 2.3.34 file. But I would still like to know why my version is so much higher then 2.3.34.
Click to expand...
Click to collapse
your looking at the version of the software build, complete jargon here but say your on android 2.2.1 version blah blah blah, what i was referring to was although you may have a higher version of 2.2.1 than what you are reading, a lower version of a higher android software such as 2.3.3 is better than a higher version of 2.2.1 same page?
I've been running Liberty on my Droid X for some time now and love it compared to the stock Blur interface. But it's gotten to the point where I'd like to update from Froyo to one of the more modern versions and see if that can liven up the phone again. So my question is this - from what I've read before I can update Liberty (or any other ROM for that matter) from a Froyo based version I need to restore the phone to a semi-stock state, update via an official OTA release, re-root and go from there. Is that true? If so, any convenient guide on how to do so? I did a bit of searching and couldn't find much and while I'm pretty technically inclined my skills do not extend into the phone region and back when I originally modified the phone there were many handy guides and videos to walk me through it.
Any help would be greatly appreciated.
Nate
If your bootloader version is 30.04, SBF to 4.5.602. From there you can flash any Gingerbread or ICS rom of your choice.
If your bootloader version is 30.03, SBF to 2.3.15 and take the OTA update.
Sent from my Transformer TF101 using Tapatalk
Let the stupid questions begin...
Ok, I confirmed that I'm running 30.04 and I found a site that maintains the correct 4.5.602 file so I downloaded that. Is there anything that I need to back up before installing? Also, I read that a special program is required to install the SBF files so any assistance there would be appreciated as well.
Thanks!
Ok, so I managed to track down RSD-Lite and got it to recognize the device and start loading the sbf file however the phone couldn't get past the "manually power up the phone" phase (or something like that). It just kept showing the boot animation over and over again regardless of what I did - it would cycle between the red eye and the DROID text. I tried pushing and holding the power button, no good and none of the other buttons did anything either. Nothing worked. So I'm rerunning it again and we'll see if the second time is a charm...
Well crap, I got through the SBF install process and got the pass message from RSD but now my phone is stuck at the animation and won't go any further. I've left it running for the better part of 10 minutes and it just hangs. I'm now performing a manual factory data wipe to see if that will help.
EDIT: It appears that the factory data wipe got me through the locked animation. Still having minor issues getting through the programing and setup phase but I think it'll work eventually.
Thanks again for the help.
infazzdar said:
If your bootloader version is 30.04, SBF to 4.5.602. From there you can flash any Gingerbread or ICS rom of your choice.
If your bootloader version is 30.03, SBF to 2.3.15 and take the OTA update.
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Minor question/problem for you, sir.
Wouldn't the OTA take you all the way to .621?
Wonderful...yet another thing we need to worry about that damn update <_<
OP:
Glad you got it worked out.
Well, it's sort of worked out.
Everything is up and running but ROM Toolbox isn't able to load any ROMs. It gets granted Superuser permission so I'm pretty sure that I've got the X rooted correctly but when it tries to boot into Clockwork it appears to get an error (icon with an exclamation point) and reboots into the regular Blur interface. I'm going to have a go at loading something like Liberty Gingerbread or 3.0 via zip file but it makes me nervous that the Toolbox Pro App can't get this done.
After determining that the Toolbox App was not booting into Clockwork I downloaded and installed the Droid X Bootstrapper App and got that running. It was able to correctly boot into recovery from which allowed me to install the Liberty 3 ROM. I'm now going back through the process of setting the phone up with the new ROM so we'll see how that goes. It appears to be working, but only time will tell if it's stable. One thing is for sure, a few hours on Blur'd Gingerbread and I was ready for something else again.
Jubakuba said:
Minor question/problem for you, sir.
Wouldn't the OTA take you all the way to .621?
Wonderful...yet another thing we need to worry about that damn update <_<
OP:
Glad you got it worked out.
Click to expand...
Click to collapse
I was actually wondering whether it would or not, but I can't think of another way to update the bootloader.
Sent from my DROIDX using Tapatalk
Ok, so here's an issue that I'd appreciate some guidance on. After installing Liberty 3.0 it appears as if the phone can't fully charge. It was plugged in for 10hrs last night and yet this morning the battery only reads 61%. I don't know if it would be best to boot into recovery and wipe the battery stats not knowing if it's fully charged or not.
Thoughts?