Database Users

Nexus One network issue

Hi, i was using CM7 for a week, then suddenly, the mobile network begin to be freaky, cant stay on a network, cant make call and anything, I already cheked the apn settings and everything..
also switched to wcdma prefferred, to gsm only, or to wcdma sometime got signal, but after 1 or 2 minutes, cant connect to a network...
anyone can help please..

I'm having this as well ever since the update.
Gingerbread is half-baked if you ask me.

it seems to make and receive calls only in EDGE (in GSM ONLY mode), but when i change it to preferred wcdma or to wcdma only to get 3G, sometime get full signal but cant make any calls and also cant use data and sometimes got no service.. only in EDGE mode..
all this happen after using CM7 for a week... anyone please help..
baseband and radio are 32.50.0032U_5.12.00.08...
I also restore it to stock to FROYO FRF33 and the same issue, dont know what cause it..

I'm not sure it is fully related to gingerbread. I'm still using CM6 and had this issue on and off for about 3 days. It seems to have cleared up for me (knock on wood)
Sent from my Nexus One using XDA App

yess im having the same problem, i also noticed it after flashing to either honeycomb alpha or the new gingerbread update [i did both within an hour] but i cant fix this problem...:/

still cant connect to 3G, only in EDGE mode...
cant connect to a 3G network, already changed the radio to 5.08, 5.12 and downgrade it to 4.06 and nothing...
anyone know this issue??
if I cant solve it, I might gonna sell my Nexus One..,

Network issues have nothing to do with the phone, if they're constant with different ROMs. Check with your service provider.

Jack_R1 said:
Network issues have nothing to do with the phone, if they're constant with different ROMs. Check with your service provider.
Click to expand...
Click to collapse
is not the service provider, I change the sim card to another phone, and the 3G works flawless.
Also, put another sim of other carries with the same band, changed the APN settings, and it's the same problem with 3G, only work on 2G...

In that case, 2 options:
1) Wipe and check again.
If still doesn't work -
2) Hardware failure. Use the warranty.

I've been recently (1-2 months) battling with Data problems also and I don't know what the issue is. I know it isn't my Carrier because I just spent the whole month on the phone with them and they actually sent a Guy TO MY HOUSE to test the connection. I've never had problems before until around CM7 and me switching plans (which is what I thought it was).
My problem is that it works, but data just stops and doesn't want to reconnect. I have to toggle Airplane mode or reset to jump start it. I think changing towers while driving might do this too.
I've done the same tests. Changed Sim, Swapped Sims, etc. EDGE seems to be stable for me but 3G is wonky. I've flashed a PASSIMG and started from scratch that way back to root and CM7. I've downgraded my HBoot and reupgraded it. I've wiped and changed radio versions.
Right now I plan to swap to a few other Gingerbread roms and see if that fixes it. My N1 being my only internet connection it is hard to download other custom roms but I grabbed a few from work and put on my SD card.
I'm not blaming CM7 but at this point I'm really thinking about changing phones.

Ive read that there are issues with the Nexus One gps. Is this true and if so, what issues have you experienced?
PS. GPS doesnt have anything to do with the carrier does it?

well... my nexus already have 1 year, I'll sell it in a very cheap price, and buy the INSPIRE 4G and root it...
thx for your help guys..

Shift only uses 1x data, claims 3G

I generally use my shift at home or work on wifi. This week I'm on vacation and have been using Sprint's network primarily. I was using a CM7 nightly for a while and noticed that I've never seen the 3g icon, only 1x. I confirmed this by installing an app from the market called 'Opensignal' which shows details about your connection, which tower you're connected to, etc.
I flashed to a sense based ROM (Mik) and have the same issue- 1x only. However, it now always displays the 3g logo when data is 1x, even if roaming.
It seems that something in my phone is keeping me stuck without 3g that persists through reinstalls/wipes. I'm hoping there is some type of hidden setting or config option I can look at outside of the standard settings in the system.
Any ideas other than flashing back to stock/unrooted?

You will find that the stock sense rom will show 3G always as well. You can open up the dialer and dial ##33284# Choose EVDO engineering, and look at the state.

And if not in a sense rom *#*#info#*#* will let you view you connection details.
Toasted by Nightly.

Unfortunately I would ruu back to stock, update profile and prl in update section then see if that helps. Run speed tests and keep a record of results to help in the process of elimination. Could it just be the tower you're near or some Podunk town out in the sticks that doesn't have good equipment? Go to a sprint store with working displays. Do speed tests with the display then your phone. Maybe you got a lemon?
You could be roaming or on an old system. Turn roaming off and set network to sprint only and see if that makes any difference. I know years ago I went to my home town in the Midwest and throughput and signal was poor until I went into a major city (like the capital) then speed and signal was good again.

Thanks, I didn't realize HTC always made the 3g logo show- that's really stupid. *#*#info#*#* shows me good stuff and re-confirms me getting 1x only.
Will any of the settings listed attempt 3G data only? I set it to EVDO but it seemed to stay at 1x.

falz said:
Thanks, I didn't realize HTC always made the 3g logo show- that's really stupid. *#*#info#*#* shows me good stuff and re-confirms me getting 1x only.
Will any of the settings listed attempt 3G data only? I set it to EVDO but it seemed to stay at 1x.
Click to expand...
Click to collapse
##3282# & ##33284# are your best bet to edit anything if you're not planning on running an RUU, really you shouldn't have to, just turn EvDo only on and see if it even connects. Maybe the 1X towers are stronger than EvDo, if you have it at all.
Reset data profile entirely through ##3282# - you need your MSL - MSL Reader is on the market.
Try that and document your speed results, etc. Then update your prl. If you really want to, then go ahead and apply the 3G speed fix mentioned in Android Development (not necessary but if you're concerned with speed you might wanna try every step.)
If all that fails, you do still have the RUU and start fresh approach. Personally before I'd do anything I'd get ahold of another android device, maybe not HTC, and see what it's doing for speed, etc.
Sent from my PG06100

Great info. Using the info code I've set it to EVDO only but it still says its at 1xRTT, even after a reboot(!). My wife has a Sprint LG optimus S- I've looked at its settings and its connected @ 3G so I know whatever tower in my area should connect.
I got my MSL from that app and can get to edit mode via ##3282# but I do not see an option to reset, only to change to other profiles that appear to have the same config. It was choosing profile 1, I changed it to 0 with the same results.
How do I reset data profile?
Edit: ##33284# lists evdo as 0 (disabled) but does update info as to its signal strength and so on. This is all still with the phone set to EVDO only but yet connecting at 1xRTT.

I seem to have it working now. The change I made was ##3282#, EVDO, preferred mode = auto. This was previously set to CDMA. After a reboot I now have 3g.
I'm curious what this is set to for others? I've never been in these screens before and have this feeling that I've never had 3g data (I've had my phone since launch day).
Ive reflashed CM7 and 3g works there too now, i'm seeing the 3g icon for the first time.
Also its quite sneaky that HTC/Sprint only show the 3g icon on a Sense ROM. Had i never installed a non-sense based ROM i'd have never really known that i was stuck on 1x. Shame on HTC/Sprint.

falz said:
I seem to have it working now. The change I made was ##3282#, EVDO, preferred mode = auto. This was previously set to CDMA. After a reboot I now have 3g.
I'm curious what this is set to for others? I've never been in these screens before and have this feeling that I've never had 3g data (I've had my phone since launch day).
Ive reflashed CM7 and 3g works there too now, i'm seeing the 3g icon for the first time.
Also its quite sneaky that HTC/Sprint only show the 3g icon on a Sense ROM. Had i never installed a non-sense based ROM i'd have never really known that i was stuck on 1x. Shame on HTC/Sprint.
Click to expand...
Click to collapse
I would like to say this thread has helped me achieve EVDO (ive been 1x also since release). Sadly this doesn't work on AOSP roms for me, but i'm happy just getting what i'm paying for... and have been but haven't received. Its noticeably faster.
BUT.. for noobs not used to the ##3282# menu, after making a change, press the menu button and commit the change. I had gone through these steps changing the drop down and immediately restarting. Apparently you have to manually save these settings.. or at least on my phone.

where are you guys entering these numbers and "EVDO"? because mine is also showing 1x and i wanna fix that

AshyKnuttz said:
where are you guys entering these numbers and "EVDO"? because mine is also showing 1x and i wanna fix that
Click to expand...
Click to collapse
you get free thanks i guess... mouse slip up
anyway, its in your dialer, just use the keys as if the 'code' is a phone number

LOL double thanks

By the way i found out if you enable EVDO(DDTM) you might not receive some calls, just putting preferred mode on automatic will do the trick

falz said:
I seem to have it working now. The change I made was ##3282#, EVDO, preferred mode = auto. This was previously set to CDMA. After a reboot I now have 3g.
I'm curious what this is set to for others? I've never been in these screens before and have this feeling that I've never had 3g data (I've had my phone since launch day).
Ive reflashed CM7 and 3g works there too now, i'm seeing the 3g icon for the first time.
Also its quite sneaky that HTC/Sprint only show the 3g icon on a Sense ROM. Had i never installed a non-sense based ROM i'd have never really known that i was stuck on 1x. Shame on HTC/Sprint.
Click to expand...
Click to collapse
For the record the stock rom WILL show 1x. I've seen it. I guess that's when service is just plain terrible.
Sent from my PG06100 using XDA Premium App

I would like to fix this on my phone as well but I'm having some trouble entering the code. When I go to my dialer and enter ##3282# nothing happens. What am I missing? Thanks.
Sent from my PG06100 using XDA App

njeske said:
I would like to fix this on my phone as well but I'm having some trouble entering the code. When I go to my dialer and enter ##3282# nothing happens. What am I missing? Thanks.
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
The only rom it works for me on is MikShift. Not even on the stock rom, though I did call and voice my complaints to both Sprint AND HTC, they didn't give a rat's ass.
Sent from my PG06100 using XDA Premium App

If I install mikshift and make the change will it persist if I flash back to cm7?
Sent from my PG06100 using XDA App

njeske said:
If I install mikshift and make the change will it persist if I flash back to cm7?
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
It worked for me. I also updated my Profile and PRL through sprint just for the hell of it.

njeske said:
I would like to fix this on my phone as well but I'm having some trouble entering the code. When I go to my dialer and enter ##3282# nothing happens. What am I missing? Thanks.
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
1 Reboot your HTC EVO Shift 4G.
2 Press your phone icon on the screen.
3 Enter ##3282#.
4 You have to give it roughly 10 seconds for the EPST screen to appear.
5 If the 1st 3 steps don't work, you may have to restore to the Stock ROM.

alcohol120% said:
It worked for me. I also updated my Profile and PRL through sprint just for the hell of it.
Click to expand...
Click to collapse
Seem to have worked for me as well except on the next day...I got an (I believe unrelated) random wake-up reboot, it just decided to keep connecting in1x mode. Now I'm back to mik and I'm constantly in evdo rev a mode
I really like cm and I've had it fully setup to my liking...then when I discovered about opensignal and the whole 1x thing...I feel like I'm missing out on something. I think its more ocd than anything else since cm7 is fully functional anyway...but still. I do hope they figure out what the prob is. I can't wait to go back to cm
i dont need a signature

Losing network connection completely stock Gingerbread 2.3.3

Ever since the Gingerbread update (I've manually updated to 2.3.3 stock by using the full image, wiped everything before), I occasionally lose network access completely. Not just data, but also calls.
My Wifi is enabled and that seems to remain connected, but my mobile network seems to just die.
I'm on Vodafone UK, London Area.
Interestingly, sometimes the bar lights are still showing as good reception, but i can't make calls and people can't call me.
Furthermore, when i search for networks it normally returns an Error. giving little information (something along the lines of: error while searching for networks)
Cycling airplane mode does not help. Sometimes power-cycling the phone doesn't help.
What does help, is when i click on "Use only 2G networks" - that seems to connect fine and i can make calls again. then, i can *sometimes* successfully go back to 3g but un-ticking the use only 2g networks.
I'm using stock 2.3.3
Baseband version:
32.41.00.32U_5.08.00.04
I tired updating the radio at one point to 5.12 but that seemed to have been so bad that i couldn't connect at all.
I think, that if my Wifi was turned off and I would use the network data connection, my "voice connection" (i.e. calls) would work fine - that is because i never see this problem when i'm outside using network data.
Is someone else seeing this?

Yeah, me too. I'm on T-Mobile in the US. It happens about once a week.
Sent from my Nexus One using XDA Premium App

I use this workaround after many hours of investigation into the problem on various forums and with Vodafone...
1. O the keypad, type *#*#4636#*#*
2. From the menu select "Phone information"
3. Go down the list to "Select preferred network type" which, by default on Vodafone, is set to "WCDMA preferred".
4. Click on the drop down menu and select "GSM auto (PRL).
5. Exit all and reboot.
This not only improved my signal but also my battery life as well as I was not constantly seeking WCDMA. Don't worry, if you need data and are within a 3.5G area, it will use WCDMA.
Give it a try, you have nothing to lose and can always switch back.
Hope this helps.

Will give that a try.
I think at one point i had it set to that...
Will update if it solved my problem.

itay1 said:
Will give that a try.
I think at one point i had it set to that...
Will update if it solved my problem.
Click to expand...
Click to collapse
To be honest with you itay1, I had a few problems last year with the Vodafone firmware.
Not the least of which was the inability to send MMS's when connected to WiFi. and being given the run-around by Vodafone, who at one stage or another, blamed everything and everybody.
In the end I rooted my phone and switched to Cyangen Mod's and since then have had no problems. Besides which, IMHO, the CM7 stable version, released today, is far superior to the stock Gingerbread I tried from Google.

Thanks for the tips.
So i gave 5.12 Radio another try + your change for GSM auto (PRL) and so far it seems better.
I haven't lost network connectivity yet - however.. i'm starting to think it really might be up to Vodafone. Maybe they have network failures that they are not reporting.
Definitely going to switch at the end of contract. I hear GiffGaff have pretty awesome deals!

itay1 said:
Thanks for the tips.
So i gave 5.12 Radio another try + your change for GSM auto (PRL) and so far it seems better.
I haven't lost network connectivity yet - however.. i'm starting to think it really might be up to Vodafone. Maybe they have network failures that they are not reporting.
Definitely going to switch at the end of contract. I hear GiffGaff have pretty awesome deals!
Click to expand...
Click to collapse
I'm also using radio 5.12 with no problems. Rock solid.
Quite a few people I know have switched to giffgaff...
£10 a month currently gets you...
250 mins
Unlimited web (within reason I guess)
Unlimited texts.
See here:-
http://giffgaff.com/

[Q] Force HSPA to stay active?

Is there a way to force CyanogenMod (or even the stock rom) to stay at HSPA? My phone has issues going from 3G to HSPA and staying there (happens regardless of rom). Is there a way to make it stick on HSPA? I'm not too worried about the battery life, it's already pretty abysmal.
Thanks!

I don't know if there is. The reason it does that is to keep unnecessary bandwidth from being used by the phone. It's a quick switch.
Edit: there is the old method of dialing *#*#4636#*#* and selecting wcdma only, but I think it still switches between 3G/4G

There is no way, it's dependent on cellular carrier and not on the phone AFAIK.
The question is - why would you want to? What are the "issues" you're seeing?

Jack_R1 said:
There is no way, it's dependent on cellular carrier and not on the phone AFAIK.
The question is - why would you want to? What are the "issues" you're seeing?
Click to expand...
Click to collapse
my phone is refusing to go up to 4g (HSPA) in a reasonable amount of time. It takes on average 45-60 seconds for it to move up. It's done that no matter which rom I use and it's annoying as pages won't load until it goes to HSPA

Bad. OK, as a very harsh and bad semi-solution you could run a ping once in 5 sec, that would keep your phone's data connection constantly active. But it's no good solution.

Have you tried flashing a different radio? You never know...

illru said:
Have you tried flashing a different radio? You never know...
Click to expand...
Click to collapse
That's more a reception thing...
Sent from my Nexus 4 using xda app-developers app

I have the same question, but my my touch 4g stays in E and doesnt want to go to H, we send it to htc service for power button replacement, it came like that from htc, now another issue can not hear anything but myself. strange, should I send it back? its been like 4 months.
I am on straight talk and my other phone runs on H with the same sim card

Gizmo07 said:
I have the same question, but my my touch 4g stays in E and doesnt want to go to H, we send it to htc service for power button replacement, it came like that from htc, now another issue can not hear anything but myself. strange, should I send it back? its been like 4 months.
I am on straight talk and my other phone runs on H with the same sim card
Click to expand...
Click to collapse
Just for kicks, make sure it's not set to 2G-only mode in the system settings... You never know!

For some reason I cant find it in the settings, any idea where to look for it? I just downgraded to 2.21

Gizmo07 said:
For some reason I cant find it in the settings, any idea where to look for it? I just downgraded to 2.21
Click to expand...
Click to collapse
Refer to my above post. It's in a hidden menu accessible from the dialer.
Sent from my HTC Glacier using xda app-developers app

matada said:
Is there a way to force CyanogenMod (or even the stock rom) to stay at HSPA? My phone has issues going from 3G to HSPA and staying there (happens regardless of rom). Is there a way to make it stick on HSPA? I'm not too worried about the battery life, it's already pretty abysmal.
Thanks!
Click to expand...
Click to collapse
I did the *#*#4636#*#* and switched to wcdma only and it seems to make the transition quicker maybe 2 seconds instead of 25 and I'm on the nexus 4

[Q] No service after trying LTE

Hi
I was playing around with my phone and tried the old hack through the settings screen, *#*#4636#*#*.
Switched it to LTE and set up a new APN for Rogers LTE.
It Didn't work. After more reading I discovered this wouldn't work for me anyway. I have Android 4.4.2 and I don't think my SIM is LTE enabled.
I rebooted thinking it would just go back to the original settings.
It seems to have gone back but now I have No signal at all.
I am with Rogers. I tried going back to the original APN settings and selecting Rogers.
The phone is finding the correct networks for my area.
I tried the Reset to default in the APN settings. This sets the APNs to Rogers LTE and chatr, not the original Rogers APN that I started with.
The phone is rooted but running stock Android 4.4.2.
The baseband seems correct.
What have I done and how do I fix it?
Have I done something to the Rogers SIM?
Thanks

Angus_xda said:
Hi
I was playing around with my phone and tried the old hack through the settings screen, *#*#4636#*#*.
Switched it to LTE and set up a new APN for Rogers LTE.
It Didn't work. After more reading I discovered this wouldn't work for me anyway. I have Android 4.4.2 and I don't think my SIM is LTE enabled.
I rebooted thinking it would just go back to the original settings.
It seems to have gone back but now I have No signal at all.
I am with Rogers. I tried going back to the original APN settings and selecting Rogers.
The phone is finding the correct networks for my area.
I tried the Reset to default in the APN settings. This sets the APNs to Rogers LTE and chatr, not the original Rogers APN that I started with.
The phone is rooted but running stock Android 4.4.2.
The baseband seems correct.
What have I done and how do I fix it?
Have I done something to the Rogers SIM?
Thanks
Click to expand...
Click to collapse
Did you flash a LTE Hybrid?
Sent with my Nexus® 10 minus 3

Berrydroidcafe said:
Did you flash a LTE Hybrid?
Sent with my Nexus® 10 minus 3
Click to expand...
Click to collapse
I didn't flash anything.

Angus_xda said:
I didn't flash anything.
Click to expand...
Click to collapse
Had to assume that because I've never seen someone try LTE without doing so.
What you can try is find the stock radio, which might still be the same as you are using, then flash it. Maybe that will reset things back to normal.
Sent with my Nexus® 10 minus 3

Berrydroidcafe said:
Had to assume that because I've never seen someone try LTE without doing so.
What you can try is find the stock radio, which might still be the same as you are using, then flash it. Maybe that will reset things back to normal.
Sent with my Nexus® 10 minus 3
Click to expand...
Click to collapse
No luck.
I tried flashing the stock radio then flashed everything using efrant's instructions. Still no go.
The thing I find strange is when I select Reset to default in the APN settings it sets the APN to Rogers LTE not the default 3G setting.

Delete the Rogers LTE apn and make a new one with this info:
Name: Rogers
APN: rogers-core-appl1.apn
MMSC: http ://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
APN Type: mms
You can also try this one:
APN: internet.com
Username: wapuser1
Password: wap
Go to phone info *#*#4636#*#*, and change network type to WCDMA Preferred. Reboot, and see if that does it.

I've done that several times.
Still won't connect.
The error is; No service. Selected network (ROGERS) unavailable.
When I search networks Telus, Bell and Rogers all show up.
I've tried selecting Rogers and selecting automatically. When I select automatically it selects Rogers but comes back with the same error.

Try reflash Radio

alexcheveau said:
Try reflash Radio
Click to expand...
Click to collapse
That was already suggested.
I have tried wiping everything out and flashing a complete stock 4.4.2.
I've also tried another Rogers SIM.
This is getting ridiculous.
All I did was change a setting from "WCDMA Preferred" to "LTE/GSM auto (PRL)" and back again and that killed a phone?

Angus_xda said:
That was already suggested.
I have tried wiping everything out and flashing a complete stock 4.4.2.
I've also tried another Rogers SIM.
This is getting ridiculous.
All I did was change a setting from "WCDMA Preferred" to "LTE/GSM auto (PRL)" and back again and that killed a phone?
Click to expand...
Click to collapse
I find this very strange. I use the secret menu on two phones but have never heard of this happening. My N4 will only lose signal for a few moments before switching to gsm autoprl, after switching from LTE/GSM.
Sent from backpack

Mystery solved.
I don't know why it happened at exactly the time when I tried LTE but...
The phone has been reported lost or stolen.
I bought it over two weeks ago. I checked the IMEI on the Government web site, that is supposed to protect us from this kind of thing, and it came back clean. I checked again last night and it's blacklisted.
I would say the girl that I bought it from got it on a $0 contract. Sold it then reported it lost or stolen. She's still on the hook for the contract but, so what, she'll never really have to pay it. Either that or it takes 2-3 weeks for a phone to show up on the blacklist.
Either way, the Government initiative to blacklist stolen or lost phones sounded like a good idea but in reality it's not protecting anyone.
So, now I have a small tablet and learned a lesson. Don't buy used cell phones and if you do, don't trust the protectyourdata.ca web site to protect you.
The site boasts;
"Purchasing a pre-owned device?
Check the IMEI number here to ensure the device has not been reported lost or stolen in Canada."
Thanks for trying to help folks. I did learn more about Android through this.

Angus_xda said:
Mystery solved.
I don't know why it happened at exactly the time when I tried LTE but...
The phone has been reported lost or stolen.
I bought it over two weeks ago. I checked the IMEI on the Government web site, that is supposed to protect us from this kind of thing, and it came back clean. I checked again last night and it's blacklisted.
I would say the girl that I bought it from got it on a $0 contract. Sold it then reported it lost or stolen. She's still on the hook for the contract but, so what, she'll never really have to pay it. Either that or it takes 2-3 weeks for a phone to show up on the blacklist.
Either way, the Government initiative to blacklist stolen or lost phones sounded like a good idea but in reality it's not protecting anyone.
So, now I have a small tablet and learned a lesson. Don't buy used cell phones and if you do, don't trust the protectyourdata.ca web site to protect you.
The site boasts;
"Purchasing a pre-owned device?
Check the IMEI number here to ensure the device has not been reported lost or stolen in Canada."
Thanks for trying to help folks. I did learn more about Android through this.
Click to expand...
Click to collapse
That really sucks
But thanks for letting us know.
Sent by carrier pigeon

klvnhng said:
That really sucks
But thanks for letting us know.
Sent by carrier pigeon
Click to expand...
Click to collapse
I've seen about 2 or 3 threads on Android Central with the same symptoms that seemed to never get resolved.
I suspect they had the same problem and either didn't know how to check or were to embarrassed to say.
I was upset but I want others to be able to find this answer.
Through buying and selling different phones working my way up to the Nexus 4 I'm really only $110 out of pocket.
A 16GB Android media player with WiFi must be worth $110.
So, is there a way to eliminate the wireless radio and leave WiFi?
I guess I should start another thread on that.

Angus_xda said:
I've seen about 2 or 3 threads on Android Central with the same symptoms that seemed to never get resolved.
I suspect they had the same problem and either didn't know how to check or were to embarrassed to say.
I was upset but I want others to be able to find this answer.
Through buying and selling different phones working my way up to the Nexus 4 I'm really only $110 out of pocket.
A 16GB Android media player with WiFi must be worth $110.
So, is there a way to eliminate the wireless radio and leave WiFi?
I guess I should start another thread on that.
Click to expand...
Click to collapse
I guess the simplest way would be to just have airplane mode on?
Sent by carrier pigeon

klvnhng said:
I guess the simplest way would be to just have airplane mode on?
Sent by carrier pigeon
Click to expand...
Click to collapse
Airplane mode also turns of the WiFi.
I just pulled the SIM, deleted all APNs, turned off Mobile Data and left WiFi on.
The warning that I had no data connection is gone and I still have the ability to make a 911 call if necessary.
Unlocked, rooted and flashed a USB-OTG enabled kernel. This is great fun...

Angus_xda said:
Airplane mode also turns of the WiFi.
I just pulled the SIM, deleted all APNs, turned off Mobile Data and left WiFi on.
The warning that I had no data connection is gone and I still have the ability to make a 911 call if necessary.
Unlocked, rooted and flashed a USB-OTG enabled kernel. This is great fun...
Click to expand...
Click to collapse
You can turn wifi on with airplane mode on as well. Just do it after airplane mode is already on.
But that works too, I guess
Sent by carrier pigeon

klvnhng said:
You can turn wifi on with airplane mode on as well. Just do it after airplane mode is already on.
But that works too, I guess
Sent by carrier pigeon
Click to expand...
Click to collapse
Yep, just figured that out.

Did you make a police report? You might not be able to recoup anything, but you should still make the seller be responsible for their actions
Sent from my Nexus 4 using xda app-developers app